Transcription
cnMatrix Parameters and CommandsTable of ContentsL2 Features . 3cnMatrix VLAN Parameters and Commands. 3cnMatrix RSTP Parameters and Commands . 7cnMatrix MSTP Parameters and Commands . 11cnMatrix PVRST Parameters and Commands . 12cnMatrix LLDP Parameters and Commands . 14cnMatrix RMON Parameters and Commands. 19cnMatrix SNTP Parameters and Commands . 20cnMatrix Port Settings Features Parameters and Commands. 23Negotiation . 23Speed . 23Duplex . 23MTU. 24cnMatrix Link Aggregation Parameters and Commands . 24cnMatrix Private VLAN Edge Parameters and Commands . 27cnMatrix PoE Parameters and Commands . 27cnMatrix Port Mirroring Parameters and Commands . 27cnMatrix Storm-Control Parameters and Commands . 28cnMatrix Rate-Limit-Output Parameters and Commands . 29cnMatrix QoS Parameters and Commands . 29cnMatrix Auto Attach Parameters and Commands . 35cnMatrix Dynamic ARP Inspection Parameters and Commands (Starting with version 2.1) . 39L3 Features . 40cnMatrix DHCP Relay Parameters and Commands. 40cnMatrix IP Routing Parameters and Commands . 41cnMatrix OSPF Parameters and Commands . 43(Starting with version 2.1). 43cnMatrix RIP Parameters and Commands . 49(Starting with version 2.1). 49Management Features. 52cnMatrix DHCP Client Parameters and Commands . 52Copyright 2019 Cambium Networks. All rights reserved.1
cnMatrix Parameters and CommandscnMatrix DHCP Server Parameters and Commands . 54cnMatrix OOB Parameters and Commands . 58cnMatrix Telnet Client Parameters and Commands . 59cnMatrix Telnet Server Parameters and Commands . 59cnMatrix System Resource Monitoring Parameters and Commands . 59cnMatrix SYSLOG Parameters and Commands . 60cnMatrix SNMP Parameters and Commands . 61cnMatrix SSH Parameters and Commands . 64cnMatrix IPv6 Management Parameters and Commands . 65cnMatrix Reload Parameters and Commands . 66(Starting with version 2.1). 66cnMatrix USB Parameters and Commands . 67(Starting with version 2.1). 67Security Features . 68cnMatrix RADIUS Parameters and Commands . 68cnMatrix TACACS Parameters and Commands . 69cnMatrix IGMP Snooping Parameters and Commands . 70cnMatrix DHCP Snooping Parameters and Commands . 75cnMatrix ACL Feature Parameters and Commands . 76cnMatrix Static MAC Parameters and Commands. 100cnMatrix Local Management User Name Password Parameters and Commands . 101cnMatrix HTTPS Parameters and Commands . 102cnMatrix HTTP/HTTPS Parameters and Commands . 104cnMatrix 802.1X Authentication Parameters and Commands . 105Copyright 2019 Cambium Networks. All rights reserved.2
cnMatrix Parameters and CommandsL2 FeaturescnMatrix VLAN Parameters and CommandsCommandsDescriptionCLI Modevlan vlan-id Creates a VLAN and enters into the configVLAN mode in which VLAN specificconfigurations are done and sets the VLANin active mode.Global Configurationname vlan name string Configures name for the VLAN.Config-VLANprotocol-vlanEnables protocol-VLAN based membershipclassification on all ports of the switch.Global Configurationmap protocol {ip novell netbios appletalk other aa:aa oraa:aa:aa:aa:aa } {enet-v2 snap llcOther snap8021H snapOther} protocols-group Group id integer(0-2147483647) TBDCreates a protocol group with a specificprotocol and encapsulation frame typecombination.Global Configurationports [add] nfigures a VLAN entry with the requiredmember ports, untagged ports and/orforbidden ports, and activates the VLAN.Config-VLANports [add] ([ interface-type 0/ab,0/c,. ] [ interface-type 0/ab,0/c,. ] [port-channel a,b,c-d ])[untagged interface-type 0/a-b,0/c,. [ interface-type 0/a-b,0/c,. ] [portchannel a,b,c-d ][all])] [forbidden interface-type 0/a-b,0/c,. [ interface-type 0/a-b,0/c,. ] [portchannel a,b,c-d ]Configures a VLAN entry with the requiredmember ports, untagged ports and/orforbidden ports, and activates the VLAN.The VLAN can also be activated using thevlan active command.Config-VLANvlan activeActivates a VLAN in the switch.Config-VLANswitchport access vlan vlanid (1-4094) Configures the PVID (Port VLAN Identifier)on a port.InterfaceConfiguration(Physical /The interface-type parameter can have thefollowing values: ht 2019 Cambium Networks. All rights reserved.3
cnMatrix Parameters and CommandsCommandsDescriptionCLI ModePort Channel)switchport acceptable-frame-type {all tagged untaggedAndPrioritytagged }Available options:Configures the type of VLAN dependentBPDU frames such as GMRP BPDU thatthe port should accept during the VLANmembership configuration.InterfaceConfiguration(Physical /Port Channel)switchport ingress-filterEnables ingress filtering feature on theport.InterfaceConfiguration(Physical /Port Channel)port protocol-vlanEnables protocol-VLAN based membershipclassification in a port.InterfaceConfiguration(Physical Interface)switchport map protocols-group Group idinteger(0-2147483647) vlan vlan-id Maps the configured protocol group to aparticular VLAN ID for an interface.InterfaceConfiguration(Physical /Port Channel)Configures the mode of operation for aswitch port.InterfaceConfiguration(Physical /Port Channel)Enables the tracing of the VLAN submodule as per the configured debug levels.Privileged Exec all - configures the acceptable frame type as all.tagged - configures the acceptable frame typeas tagged.untaggedAndPrioritytagged - configuresthe acceptable frame type as untagged andpriority tagged.Available options: Group id integer(0-2147483647) configures a unique group ID that is alreadycreated with the specified protocol type andencapsulation frame type.switchport mode { access trunk hybrid {private-vlan {promiscuous host }} {dynamic {auto desirable}} }Available options: access - configures the port as access port thataccepts and sends only untagged.trunk - configures the port as trunk port thataccepts and sends only tagged frames.hybrid - configures the port as hybrid port thataccepts and sends both tagged and untaggedframes.debug vlan { [{fwd priority redundancy}([initshut] [mgmt] [data] [ctpl][dump] [os] [failall] [buffer] [all])][switch context name ] }[{ short (0-7) alerts critical debugging emergencies errors informational notification warnings }]Available options:Copyright 2019 Cambium Networks. All rights reserved.4
cnMatrix Parameters and CommandsCommandsDescriptionCLI Modeshow vlan [brief id vlan-range summary ascending]Displays VLAN entry related information ofall active VLANs and VLANs (that are notactive) for which the port details areconfigured.Privileged Execshow vlan device infoDisplays the VLAN global information thatis applicable to all VLANs created in theswitch / all contexts.Privileged Execshow vlan protocols-groupDisplays all entries in the protocol grouptable.Privileged Execshow protocol-vlanDisplays all entries in the port protocoltable.Privileged Execshow mac-address-table [vlan vlan-range ]Displays all static / dynamic unicast andmulticast MAC entries created in the MACaddress table for the specified VLANsalone.Privileged Execshow mac-address-table static unicast [vlan vlan-range ] [address aa:aa:aa:aa:aa:aa ][{interface interface-type interface-id Available options:Displays all static unicast MAC addressentries created in the FDB table.Privileged Exec fwd - sets the submodule as VLAN forwardmodule, for which the tracing is to be done as perthe configured debug levels.priority - sets the submodule as VLANpriority module, for which the tracing is to bedone as per the configured debug levels.redundancy - sets the submodule as VLANredundancy module, for which the tracing is to bedone as per the configured debug levels.initshut - generates debug statements for initand shutdown traces.switch context name - configures thetracing of the VLAN submodule for the specifiedcontext.mgmt - generates debug statements formanagement traces.dump - Generates debug statements for packetdump traces.failall - generates debug statements for allkind of failure traces.buffer - generates debug statements for VLANbuffer related traces.ctpl - generates debug statements for controlpath traces.os - generates debug statements for OSresource related traces.data - generates debug statements for datapath traces.Copyright 2019 Cambium Networks. All rights reserved.5
cnMatrix Parameters and CommandsCommandsDescriptionCLI ModeDisplays all dynamically learnt unicastentries from the MAC address table.Privileged ExecDisplays all dynamically learnt multicastentries from the MAC address table.Privileged Execshow mac-address-table aging-timeDisplays the ageing time configured for theMAC address table.Privileged Execclear mac-address-table dynamic [interface{port-channel port-channel-id (1-65535) Clears the dynamically learnt MACAddresses.Global Configuration vlan vlan-range - displays all staticunicast MAC address entries created in the FDBtable for the specified VLANs alone.address aa:aa:aa:aa:aa
Commands Description CLI Mode spanning-tree mode Available options: mst rst pvrst Sets the type of spanning tree to be executed, enables spanning tree operation and starts spanning tree functionality in the switch. Global Configuration no spanning-tree Disables the spanning tree operation in the switch. Global Configuration
