WIXLIB

Custom AccessoriesBXby LeedsNosepiece AdapterThe Leeds nosepiece adapter allows for the use of asix-place or seven-place nosepiece on a BX40 or BX45microscope.Combining the LBX-D6RE nosepiece adapter with theU-D6RE) six-place nosepiece, or theOlympus U-R156 (UU-R177 (UU-D7RE) seven-place nosepiece, creates areplacement for the five-place nosepiece - which is thestandard nosepiece for the BX40 and BX45. BX40frames need to be sent to Leeds Minneapolis office forthe U-R177 Nosepiece.The LBX-D6RE adapter replaces the dovetail mount ofthe U-R156 and U-R177 nosepieces. The adapter alsoprovides an integrated slot for slider accessories which eliminates the need for a slider housing on theBX40. The LBX-D6RE adapter also adds a second slotfor slider accessories on the BX45 stand.LBX-D6REThe LBX-6RE and the U-R106 should be used on theOlympus BX45 stand when only one slider is needed.Order Product NumberLBX-D6REAdapter to mount U-R156 &U-R177 nosepieces to BX40 orBX45LBX-6REAdapter to mount U-R106, oneslider, to the BX45Shown mounted in U-R156 nosepieceLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-8

Custom AccessoriesBXby LeedsDual Lamphouse AdapterThe Dual lamphouse adapter allows for the usage oftwo light sources on one microscope system.For use with:Reflected light illuminators. BX/BX2and IX/IX2 stands.It is easy to switch from one light source to the otherwith the turn of a knob. The indicator arrows on theknob shows which light source is selected.LBX-DLHOrder Product Number:LBX-DLH Dual lamphouse adapterLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-9

Custom AccessoriesBXby LeedsFiber Optic Lamphouse AdapterThe LBX-FOMET allows for the use of fiber optictype lighting with reflected light illuminators on theBX/BX2 and IX/IX2 stands.LBX-FOMETOrder Product Number:LBX-FOMET Fiber optic lamphouse adapter(The adapter is designed for a fiber optic bundle with a ferrulediameter of .393” x 1 ¼” length. The adapter requires usageof the LPI-U-UCLH collector lens assembly).LPI-U-UCLHcollector lensLPI-U-UCLHCollector lens assembly(not included)Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-10

Custom Accessoriesby LeedsHybrid StandHybrid StandThe Leeds LBX-HYBRID hybrid stand has 18" of travel in theZ-axis, which is all done on ball bearing sleeves withcounter balanced springs. This design allows for ease inmoving the microscope components out of the way forloading or unloading specimens, or just positioning fordifferent height objects - such as whole animals ormetallurgical samples. The LBX-HYBRID also has anadjustable stop for returning the microscope back to apredetermined position after loading a specimen.The LBX-HYBRID stand is designed to be used withOlympus items: BXFM-F focus module, BXFM-ILH mountand any of the BX2 reflected light brightfield/darkfield andfluorescence illuminators.The LBX-HYBRID-RSM mount is designed for using areflected light stage on the LBX-HYBRID stand.The LBX-HYBRID-TSM module is to be used with the BX2condensers and transmitted light stages on theLBX-HYBRID stand. This module is a Koehler transmittedlight illumination system that requires the use of a BX2lamphouse and an external power supply. It can also beused with a fiber optic light system.BX-HYBRID-SZX mount allows for the use of the SZXThe LBstereoscope and SZX-FO/FOF focus unit to be used withthe LBX-HYBRID stand.The combination of the hybrid stand and the manyOlympus modular components make for a versatilemicroscope for viewing a variety of size of specimens.Order Product NumberThe Leeds LBX-HYBRID hybrid standLBX-HYBRIDHybrid stand with 18" Z-axis rangeLBX-HYBRID-RSMReflected light stage mountLBX-HYBRID-TSMTransmitted light stage moduleLBX-HYBRID-SZXMount for SZX and SZX-FO/FOF focusunitLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-11

Custom Accessoriesby LeedsBX/BX2 & BH2Single Objective NosepieceLMN-NEOLBX-RMSThe Leeds single objective nosepiece adapters providean option when only a single objective is needed on aBH2 or BX/BX2 series microscope. They replace themultiple place nosepiece normally used.They are available for RMS or NEO thread and installationis simple: the adapters are designed to slide into thenosepiece dovetail of the BH2 or BX/BX2 seriesmicroscope stand.Order Product NumberLBX-NEOLMN-RMSLMN-NEORMS standard thread for BH2NEO thread for BH2LBX-RMSLBX-NEORMS standard thread for BX/BX2NEO Thread for BX/BX2Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-12

Custom AccessoriesBH2, BX/BX2by LeedsExtension Handle for Swing-OutCondenserThe LMA-001 simple extension handle makes it easier toreach and operate the swing-out condenser knoblocated underneath the stage.LMA-001The LMA-001 extension handle fits the swing-out typecondenser on the BH2, BX/BX2 stand.Order Product NumberLMA-001An LMA-001 mounted on acondenser on a BX41 standCondenser extension handleAn LMA-001 mounted oncondenserLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-13

Custom AccessoriesBX & BH2by LeedsParfocaling Shim SetThe Leeds parfocal shim set can aid in bringing a setof objectives into parfocality on a microscope.The brass or stainless steel shims fit over the RMS orNEO thread of the objective.Each shim set contains ten each of seven differentthicknesses of shims. Thicknesses are (in inches):.001, .002, .003, .004, .005, .007, .010.RMS Size ShimsAvailable for RMS or NEO thread size.Order Product NumberSHM-RMSSHM-NEOSet of 70 shims for RMS size threadSet of 70 shims for NEO size threadSeparately for refill or extras:SHM0000-SSingle shim for RMS size threadSHM0000-LSingle shim for NEO size thread(specify thickness desired with part number)NEO Size ShimsLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-14

Custom AccessoriesBX51WIFby Leeds2”x3” Translation BaseThe LPI-WI-XYM2 2”x3", X-Y translation base allowsthe movement of the microscope frame withoutmoving the specimen on electrodes. Useful formultiple patch clamping experiments.Can be mounted to any breadboard with a 1/4-20 x 1"mounting hole pattern. 9 1/2”x 16” footprint.Order Product NumberLPI-WI-XYM22x3, X-Y translation base forBX51WIF.LPI-WI-XYM2 2x3, X-Y translation baseLPI-WI-XYM2MOT Motorized 2x2, X-Y translationbase for BX51WIF.560-HP1PC1PCI controller cardMotorized model requires 560-HP1PC1 PCI controllercard and computer.Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-15

Custom AccessoriesBXby Leeds1" Extension Tube for the U-IT134The LPI-U-IT134 1" extension tube, when added tothe U-IT134 side camera port, will allow for moreclearance for a larger body camera.LPI-U-IT134Order Product NumberLPI-U-IT134 Pictured on a BX41LPI-U-IT1341” Extension tube for U-IT134side camera portLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-16

BX/BX2 & IX/IX2Custom Accessoriesby Leeds5 Position Auxiliary Filter Wheel forthe BX/BX2 and IX/IX2The LBX-102T filter turret allows for up to 5 filters,25mm or 32mm diameter, to be rotated into the opticalraypath on any BX/BX2 or IX/IX2 microscope frame.It mounts under the observation tube and adds 18mmto the microscope stack height.LBX-102TLBX-102TBX51WIOrder Product NumberLBX-102T5 Position auxiliary filter wheel for the IXand BX.25mm adapter rings includedLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-17

Custom Accessoriesby Leeds1X C-Mount AdaptersThe Leeds custom application 1X C-mount adapters aredesigned to be used instead of the Olympus U-V311(U-CMAD) C-mount adapter. The Leeds custom C-mountU-TV1X-2)adapters require the use of the Olympus U-V111 (Uadapter.U-V1111x camera adapter with no lens requires camera mountLPI-U-V311SLThe LPI-U-V311SL 1X C-mount adapterwith slider allows for a filter to beinserted into the camera’s raypath.U-V311Olympus C-mount camera adapterLPI-1XCS25The LPI-1XCS25 1X C-mountadapter enables the use of a CS25series Uniblitz shutter in thecamera’s raypath.Adding a filter in this position when in thecamera’s raypath will affect parfocality.LPI-CTR1XThe LPI-CTR1X centerable 1x C-mountadapter provides for a greater rangeof adjustment when centering acamera.Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-18

Custom Accessoriesby LeedsDual Photo Port AdapterThe LPI-DTRU Dual Photo Port Adapter allows for twocameras to be used without having to remove one andinstall another. This photo adapter has three light paths:100% light for the 3-U137 binocular observation tube or 20%for the binocular observation tube, and 80% for the rightphoto port or 80% for the left photo port.LPI-DTRUOrder Product NumberLPI-DTRUDual photo portLPI-DTRU pictured on a BX41 with aOLY-200 and a DP-70.Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-19

Custom Accessoriesby Leeds240o Circular Pol StageThe LPI-SRGLC low control mechanical stageis for the Olympus SRG2 circular rotatingcenterable pol stage. The LPI-SRGLC has240º of rotation and offers greaterergonomics when attached to the OlympusSRG2 stage.LPI-SRGLC on a BX41Order Product NumberLPI-SRGLCLPI-SRGLC240º low control mechanical circular polstageLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-20

Custom Accessoriesby LeedsThread AdapterLPI-M34-M25The LPI-M34-M25 thread adapter allows for the1-UB947 or 1-UB950 2X and 4X macro objectives to fitthe U-R1002 WI-SNPXLU single position nosepiece .Order Product NumberLPI-M34-M25Thread Adapter - M34 to M25Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-21

Custom Accessoriesby LeedsGlide Stage for the BX/BX2The LPI-BX2GLDE Glide Stageallows for the positioning of thespecimen by hand without theuse of XY controls.LPI-BX2GLDE Stage shown on a Olympus BX41LPI-BX2GLDE Glide StageOrder Product NumberLPI-BX2GLDELPI-BX2GLDE-WGlide Stage for BX/BX2 FramesGlide Stage for BX/BX2 FramesWhite Ceramic CoatedLPI-BX2GLDE-WWhite Ceramic Coated Glide StageLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-22

Custom Accessoriesby Leeds5-UL1035M Socket With Reflector5-UL1035M5-UL1035M on the Olympus BX41The 5-UL1035M allows for 10%more light to be reflected to thespecimen.Order Product Number5-UL1035M U-LS30-4 - With Socket ReflectorLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-23

Custom Accessoriesby LeedsLCT-UPOL-SL Condenser withPolarizer on SliderThe LCT-UPOL-SL allows for a quick removal of the polarizer unitfrom the transmitted light raypath, which increases light intensityby 2/3 and extending the life of the polarizer (the 6-U310 isincluded with the LCT-UPOL-SL).Order Product NumberLCT-UPOL-SL6-U310 Condeser and SliderModificationLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-24

Custom Accessoriesby LeedsThread Adapter - M34 to RMSLPI-M34-RMSThe LPI-M34-RMS adapter allows for a second objective with RMSthread to be mounted in the M34 thread position of OlympusU-R175 U-SLRE slider nosepiece. The LPI-M34-RMS adapteradapter can be adjusted for parfocality.Order Product NumberLPI-M34-RMSThread Adapter - M34 to RMSLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-25

Custom Accessoriesby LeedsBH2/BX Adapter for Flexible FiberLightguide Adapter5-S119FO5-S119FO pictured on the Olympus BX41The Leeds 5-S119FO BH2/BX adapter for flexiblefiber lightguides, allows for the Schott ACE seriesfiber light sources to be used in place of theOlympus Lamphouse on the BX and BH series ofmicroscopes.Order Product Number5-S119FOBH2/BX Adapter for Flexible FiberLightguide AdapterLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-26

Custom Accessoriesby LeedsBX White Ceramic Coated FixedStageLPI-BX2FXWLPI-BX2FXW pictured on the Olympus BX41The Leeds LPI-BX2FXW Stage is mounted in a fixedposition and coated with a durable white ceramic foreasier viewing and movement of the slide on the stageby hand.The round compact design of the stage has bevelededges for a more comfortable handplacement.Also available in blackOrder Product NumberLPI-BX2FXW BX2 White Ceramic Coated Fixed StageLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-27

Custom Accessoriesby LeedsExtension Handle for Swing-OutCondenser for the BX45The LBX-001-2 simple extension handlemakes it easier to reach and operate theswing-out condenser knob locatedunderneath the stage.The LBX-001-2 extension handle fits theswing-out type condenser on the BX45stand.The LBX-001 extension handleOrder Product NumberLBX-001-2Condenser flip-top leverextension for the BX45Leeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-28

Custom Accessoriesby LeedsDual View Support Stand OffsetMounting BracketLBX-152 with boltThe Leeds LPI-152 Dual ViewSupport Stand Offset MountingBracket allows for four inchesof 360 movement for betterplacement of the support standbase on the work surface.LBX-152 pictured on the Leeds LBX-B-0151Order Product NumberLBX-152Dual View Support Stand OffsetMounting BracketLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-29

Custom Accessoriesby LeedsAdjustable Support Bracket for theUDOLBX-155LBX-155 shown on the Olympus BX41 with U-IT110magnification changerThe LBX-155 attaches to theOlympus UDO and allows for32mm -50mm of adjustmentsupport when a intermitted piece isUDO.placed before theUThe LBX-155 protects the dovetailfrom damage and eliminatesvibration for second the viewer.Order Product NumberLBX-155Adjustable Support Bracket for the UDOLeeds Custom ProductsPhone: 800-444-5333 763-546-8575Fax: mB-30

Stereo

Custom AccessoriesSTEREOby LeedsLeeds’ Custom Boom StandComponents for Stereo MicroscopesFor a complete boom stand you willneed:1) Column assembly2) Drop prevention collar3) Arm assemblyLMA-036ALMA-036ALMS-150LMS-150LMS-151Drop prevention collarHeavy boom base & 24” column(2” x 10” x 16”, 105 lbs total weight)LMS-151Horizontal arm assemblyLMS-19716” Vertical column with table clampLMS-197-24 24” Vertical column with table clampLMS-19814” Vertical column with flange mountLMS-198-24 24” Vertical column with flange mountLMS-200Boom base & 14” column(same as used on the LMS-100 complete stand)LMS-197LMS-200LMS-200-24 Boom stand base & 24” columnLMS-201Ball bearing boom arm provides forsmooth easy 21” horizontal movementalong arm. It is designed to holda bonder style focus mount with a 5/8”diameter post mount.LMS-300Articulating boom arm has a doublejointed fold away design to save space atLMS-198the workstation and does not have a rearprotrusion like the rigid boom arms have.It is made to fit any of the column assemblies on this page. When measured fromthe center of column to center of “fieldof view” of an Olympus SZ stereoscope,the horizontal arm has a 24 ½” reach.This arm is designed to hold a bonderLMS-300style focus mount with a 5/8” diameterpost mount.Leeds Custom ProductsLMS-201Phone: 800-444-5333 763-546-8575Fax: mS-1

Custom AccessoriesSTEREOby LeedsInclination Joint for Olympus BonderFocus MountLMA-058Unlike the stock Olympus S-02662 and S-0266 focusmounts, which drops into the post mount of the boomarm, the modified Leed’s LMA-058 inclination joint ismounted from the underside of the boom arm and isheld securely in place with the provided dropprevention knob. The

by Leeds Knob Extension Kits for BX Stage Leeds Custom Products Phone: 800-444-5333 763-546-8575 Fax: 763-546-4369 custom@leedsmicro.com www.leedsmicro.com The LBX-072 and LBX-075 knob kit extends the length of the low coaxial control knobs on BX stage by one inch. It also provides larger diameter control knobs for better ergonomic situations.