WIXLIB

ZIP SYSTEM LIQUID FLASHINGMANUFACTURERHuber Engineered Woods LLC10925 David Taylor Drive, Suite 300, Charlotte, NC 28262800.933.9220 Technical Service: 800.933.9220 x2716ZIPSystem.com HuberArchitectLibrary.comBASIC USE AND APPLICATIONSZIP System Liquid Flash is a liquid‐applied flashing membrane usein combination with ZIP System Sheathing to create a continuousair/moisture barrier. ZIP System Liquid Flash is compatible withZIP System Sheathing’s phenolic resin‐impregnated protectivefacing, and works in conjunction with ZIP System Tape topermanently flash and seal all building penetrations and panelseams.ADVANTAGESZIP System Liquid Flash loads into a professional sausage‐packcaulking gun and is easily applied to form a resilient, seamlessmembrane. Intended for use on both commercial and residentialbuildings, ZIP System Liquid Flash provides great versatility insealing panel seams and irregular, curved, or hard‐to‐flash areassuch as a curved window and door rough openings, through‐wallpipe, conduit, and vent penetrations, and terminations of metalflashings.ZIP System Liquid Flash is specifically formulated forcompatibility and durability as a component of the ZIP Systemair/moisture barrier. It is also effective in similar applicationsutilizing a wide range of sheathing and weather barrier products.Test results for air/moisture assemblies utilizing ZIP SystemLiquid Flash as a component demonstrate its effectiveness inpreventing air infiltration and water penetration at vulnerablebarrier penetrations of vents, piping, and conduits as well astransitions from sheathing to adjacent masonry construction.ZIP System Liquid Flash transforms ZIP System sheathing into aseamless protective barrier, providing a superior airtight andwatertight seal that resists harsh elements. The combination ofZIP System Sheathing and ZIP System Tape or ZIP System LiquidFlash eliminates the need for a separate application of buildingwrap or roofing felt. Install the sheathing panels, seal the seamwith ZIP System Tape or ZIP System Liquid Flash, seal thepenetrations with ZIP System Liquid Flash, and the building ispermanently weatherized.ZIP System Liquid FlashAllowable Exposure Period180 DaysSealant CompositionSingle component silyl‐terminated polyether (STPE)Surface and ambientApplicationTemperatureBetween 35 F (2 C) and110 F (43 C)CompatibilityPVC, EPDM, concrete,masonry, structuralsheathing, painted andunpainted metals, and glassThe result is a superior, reliable, durable seal. ZIP System LiquidFlash displays excellent resistance to deterioration from agingand from weather exposure – a critical need for components ofthe air/moisture barrier that are not visible and readilyrenewable. In addition, its elongation accommodates the normalexpansion and contraction found in wood construction.ZIP System Liquid Flash is easy to gun, spread, and tool in harshand demanding weather conditions. It bonds to damp or drysurfaces and does not need a primer when bonding to the ZIPSystem panel surface. It becomes opaque when the minimumrequired thickness achieved, ensuring a good quality control andefficiency.SUSTAINABILITY Contains no solvents or isocyanates Complies with US EPA National VOC Standards forArchitectural Control Measure for Architectural Coatings, 63FR 176:48848 Complies with California Air Resources Board (CARB)Suggested Control Measure for Architectural Coatings (SCM)PACKAGINGZIP System Liquid Flash is available in 20 oz. (0.59 L) sausagepacks and standard 29 oz. (0.86 L) caulk tubes.

NOTES AND LIMITATIONSZIP System Liquid Flash is classified as a Class A building material;however, it is not recognized for use where non‐combustiblesealants are required. Recommended for use in buildings of Class V construction and construction permitted under the IRCNot considered a substitute for self‐adhering ice and waterbarrier applications in roofing systems; where such materialsare required, proved them in addition to application of LiquidFlash Not recommended for use as a structural sealant or adhesive, a through‐wall flashing or for use below grade or wherecontinuously immersed in waterCompatible with most urethane, silicone, and acrylic sealantsand coatingsSUBSTRATEEnsure that substrate is surface dry and free of frost, dust, dirt,loose fasteners, and protrusions. Apply Liquid Flash whenambient air and substrate are above 35 F (2 C) and below 110 F (43 C).Refer to manufacturer’s instructions for application of ZIPSystem Panels and ZIP System Tape. Prime or lightly scuffportions of ZIP System Tape application that will come intocontact with Liquid Flash.INSTALLATIONRefer to manufacture’s ZIP System Liquid Flash InstallationManual for instructions for application. Fill gaps exceeding 1/4"(6 mm) with approved backing material prior to application.Comply with detailed instructions for flashing the following: Flanged and brick mould windowsPipe, conduit, and electrical boxesVent hoodsMechanical flashing transitionsAVAILABILITYHuber Engineered Wood’s ZIP System Liquid Flash is availablethrough distributors nationwide. Visit ZIPSystem.com or contactHuber Engineered Woods for a retailer near you.WARRANTYZIP System Liquid Flash is furnished with a 30‐year systemwarranty when used with ZIP System Sheathing. SeeZIPSystem.com for details.TECHNICAL SERVICEDetailed information including specifications, product literature,test reports, installation instructions, and special applications isavailable through Huber Engineered Woods. Please visitZIPSystem.com or call 800.933.9220 x2716 to speak to atechnical representative or techquestions@huber.com.AVAILABLE RESOURCESSection 06 16 00 SHEATHING and Section 06 16 13 INSULATINGSHEATHING guide specifications for ZIP System Roof and WallSheathing products in CSI 3‐part format is available atZIPSystem.com or HuberArchitectLibrary.com.ZIP System Liquid Flash Physical PropertiesTotal Solids99 percentVOC Content30 g/L maximumHardness, Shore AASTM C66135‐45Tensile StrengthASTM D412 150 psi ( 1034 kPA)Elongation at BreakASTM D412 350 percentFlame SpreadASTM E840Smoke DevelopedASTM E8415Air Leakage, as part oftested assemblyASTM E2357 0.04 cfm/sq. ft. at1.57 lb/ sq. ft. (0.2L/s*sq m at 75 Pa)21 permsPass at 2.86 lb/sq. ft.(137 Pa)COVERAGE AND CURINGA 20 oz. (0.59 L) Liquid Flashing sausage pack coversapproximately 50 linear feet (15 m) of panel seam or 20 linearfeet (6 m) of window flashing, the 29 oz. (0.86 L) cartridge covers70 linear feet (20 m) of panel seam or 29 (8.5 m) of windowflashing, and the 10 oz. (0.30 L) cartridge covers approximately25 linear feet (7.5 m) of panel seam or 10 of window flashing.Coverage rates assume an installed thickness of 12‐15 mils in awall constructed of 2x4 framing. Liquid Flash skins within 30minutes and cures within 4 hours at 70 F (21 C) and 50%relative humidity; low temperatures and low relative humidityslow curing time.Water Vapor Transmission ASTM E96Water Penetration, asASTM E331part of tested assemblyWind Driven RainTAS‐100UV Exposure, 2000 hours ASTM G154Pass at 110 mph(177km/h)PassAccelerated WeatheringPassASTM C793STORAGE AND HANDLINGStore ZIP System Liquid Flash in the original packaging attemperature not to exceed 90 F (32 C). Store in a cool, dryplace.When stored as recommended in its original unopenedcontainer the typical shelf life for ZIP System Liquid Flash is 12months from the date of manufacture. 2015 Huber Engineered Woods LLC. AdvanTech is a registeredtrademark of Huber Engineered Woods LLC. Huber is a registrationtrademark of J.M. Huber Corporation. HUB 9003 09/18

ZIP SYSTEM R-SHEATHING SUBMITTAL FORMSubmitted to:Job Name:Submitted by:Date:Product:R-3 (1”)R-6 (1-1/2”)R-9 (2”)R-12 (2-1/2”)Huber Engineered Woods LLC10925 David Taylor Drive, Suite 300, Charlotte, NC 28262800-933-9220. www.ZIPSystem.com . www.huberarchitectlibrary.comTechnical Service Hotline: 800.933.9220 ext. 2716

ZIP SYSTEM R-SHEATHINGMANUFACTURERHuber Engineered Woods LLC10925 David Taylor Drive, Suite 300, Charlotte, NC 28262800.933.9220 Technical Service: 800.933.9220 x2716ZIPSystem.com HuberArchitectLibrary.comBASIC USE AND APPLICATIONSZIP System R-Sheathing insulating sheathing is a one-of-a-kindlayered product engineered to insulate and protect wall assembliesin a single application. ZIP System R-Sheathing combines thestrength, weather-resistive, and air barrier qualities of ZIP SystemSheathing with the thermal resistance of polyisocyanurate foaminsulation.ZIP System R-Sheathing provides a combined R-value of 3.6, 6.6, 9.6or 12.6 on the outside of wall framing in addition to wall cavityinsulation. One panel delivers thermal, air, and moisture resistance,while providing strength and durability. ZIP System R-Sheathing,with its built-in protective overlay eliminates the need for buildingwrap. Install the panels, tape the seams with ZIP System tape, andthe building is rough-dried in. A wide range of wall claddings installdirectly over ZIP System R-Sheathing to finish the exterior.ZIP System R-Sheathing uses a tough, phenolic resin-impregnatedoverlay to provide permanent weather resistance along with aproprietary seam tape that is extensively tested for long-termadhesion and flexibility.This material combination meets performance requirements forGrade D weather-resistive barriers in accordance with ICCAcceptance Criteria AC38. ZIP System R-Sheathing may be used forwalls on buildings of Type V construction and other constructionpermitted under the International Residential Code.AVAILABLE SIZESZIP System R-Sheathing panels are available in nominal 4’ x 8’sheets. The wood structural panel layer is approximately 47-15/16”x 95-7/8”, while the polisocyanurate foam bonded to the structuralpanel layer is sized at a full 48” x 96”. This allows for proper gappingbetween the wood panels, with a 1/16” to 1/8” foam overhanglocated on two of four panel edges to ensure tightly fittedinsulation. Panels are available in the following thicknesses: Nominal 1” thick: 7/16” thick ZIP System panel plus 1/2”foam with a combined R-value of 3.6 Nominal 1-1/2” thick: 7/16” thick ZIP System panel plus 1”foam with a combined R-value of 6.6 Nominal 2” thick: 7/16” thick ZIP System panel plus 1-1/2”foam with a combined R-value of 9.6 Nominal 2-1/2” thick: 7/16” thick ZIP System panel plus 2”foam with a combined R-value of 12.6thickthickthickthickZIP System BenefitsStructure and Durability Nail-able wood base Can be used to resist shear(see ESR-3373 for conditions)Built-in Water ResistiveBarrier Eliminates costly rework Instant rough dry-inContinuous Air Barrier Reduces air leakage, protecting theR-value of the insulationContinuous ExteriorInsulation Increases thermal performance Controls thermal bridgingEase of Installation All-in-one product eliminatesmultiple installationsSUSTAINABLE DESIGN CONTRIBUTIONS Low-Emitting Material: No added urea formaldehyde Sustainable Forestry Initiative Certified Wood: Harvested,transported, manufactured, and distributed utilizing sustainablepractices Renewable Forest Resources: Composed of primarily young growthbio-based resources Regional Materials: Made in the United Sates at one of our 4regional manufacturing facilities: Commerce, GA; Broken Bow, OK;Crystal Hill, VA; and Easton, METhird party independent compliance testing of ZIP System RSheathing is by Timberco, Inc. (TECO).

SUBSTRATEBefore beginning installation, verify wood wall framing is properlyspaced and aligned to continuously support panel edges.PANEL INSTALLATIONInstall ZIP System R-Sheathing in accordance with: ZIP System R-Sheathing Installation Manual ICC-ES ESR-3373 Additional requirements of code officialInstall panels with moisture barrier surface facing out. Panels maybe oriented vertically or horizontally. Refer to ZIP System RSheathing Installation Manual.TECHNICAL SERVICEDetailed information including specifications, product literature, testreports, installation instructions, and special applications is availablethrough Huber Engineered Woods. Please visit ZIPSystem.com or call800.933.9220 EXT 2716 to speak to a technical representative.AVAILABLE RESOURCESSection 06 16 13 INSULATING SHEATHING guide specifications forZIP System R-Sheathing products in CSI 3-part format is available atZIPSystem.com or HuberArchitectLibrary.com.ZIP System R Sheathing Foam Insulation PropertiesDimensional StabilityASTM D2126 2%Compressive StrengthASTM D162120-25 psiInstall ZIP System tape in accordance with all manufacturer’s writteninstructions at panel seams, openings, and penetrations.Water AbsorptionASTM C209ASTM D2842 1% 3.5%Install windows and associated window flashings in accordance withall window manufacturer’s instructions. Details of installationrecommendations are available in AutoCAD and PDF formats atZIPSystem.com or HuberArchitectLibrary.com.Water Vapor TransmissionASTM E96 1.0permFlame SpreadASTM E8440-60Smoke DevelopedASTM E8450-170TAPE INSTALLATIONSTORAGE AND HANDLINGStore and handle products according to manufacturer’s writtenrecommendations. Support panel bundles off the ground. Coverstored panels with weatherproof protective material; allow sides ofprotective material to remain loose to assure adequate aircirculation. In high-moisture conditions, cut bundle banding toprevent edge damage to panels. Factory applied packaging isintended only for protection during transit. Packaged units must bestored indoors or within a covered structure. Do not stack morethan three units high.ZIP System R Sheathing Performance PropertiesThermal Resistance (R-value)ASTM er Resistance of CoatingsASTM D2247(for 14 day)PassedWater Vapor TransmissionPanel OverlayASTM E9612-16 permsWater PenetrationASTM E331PassedAir Barrier AssemblyASTM E2357ZIP System R-Sheathing is furnished with a 30-year system warrantyas well as a 30-year warranty against delamination andmanufacturing defects, subject to published standard terms andcondition.Air Barrier MaterialASTM E21780.037L/(s*m2)-0.0016L/(s*m2)Wind Driven RainTAS 100 (at 100 mph)PassedNOTES AND LIMITATIONSAccelerated WeatheringASTM G154PassedAVAILABILITYHuber Engineered Wood’s ZIP System R-Sheathing panels aremanufactured at multiple locations in the U.S. They are availablethrough distributors nationwide. Visit ZIPSystem.com or contactHuber Engineered Woods for a retailer near you.WARRANTYZIP System R-Sheathing should be covered with a code-complyingexterior wall cladding within 180 days of installation. ZIP System RSheathing can only be used structurally with wood framedconstruction.*LTTR for foam, with R-value of 7/16” OSB per ASHRAE Handbook-Fundamentals. For additionalperformance and installation information: Refer to ZIP System R-Sheathing ICC-ES ESR-3373.DO NOT use in roofs or structurally over light gauge metal framing.For systems requiring multiple layers of water-resistive barriers, ZIPSystem R-Sheathing is intended to replace only the first layer.ZIP System R-Sheathing should not be used with adhesively attachedEIFS, but can be used with mechanically attached EIFS. 2015 Huber Engineered Woods LLC. AdvanTech is a registered trademark ofHuber Engineered Woods LLC. Huber is a registration trademark of J.M. HuberCorporation. HUB-9005 02/17

ZIP SYSTEM STRETCH TAPE SUBMITTAL FORMSubmitted to:Job Name:Submitted by:Date:Product:6” ZIP System Stretch Tape10” ZIP System Stretch TapeHuber Engineered Woods LLC10925 David Taylor Drive, Suite 300, Charlotte, NC 28262800-933-9220. www.ZIPSystem.com . www.huberarchitectlibrary.comTechnical Service Hotline: 800.933.9220 ext. 2716

ZIP SYSTEM STRETCH TAPEMANUFACTURERHuber Engineered Woods LLC10925 David Taylor Drive, Suite 300, Charlotte, NC 28262800.933.9220 Technical Service: 800.933.9220 x2716ZIPSystem.com HuberArchitectLibrary.comBASIC USE AND APPLICATIONSZIP System Stretch TapeZIP System stretch tape is a code-recognized flashing tape thatstretches and forms around irregular and difficult to seal areas likewindow rough openings, curved window heads, and wall and roofpenetrations. It is UV radiation resistant and highly effective atsealing up the exterior building envelope. Unlike most other flashingtapes, ZIP System stretch tape is compatible with flexible PVCwindows.Maximum ExposureTime180 DaysAdhesive TypeAcrylicInstallationTemperature Range0 F – 120 FZIP System stretch tape easily stretches to fit difficult to flash areaswith a single piece without having to piece tape segments together.This avoids tape seams or joints. ZIP System stretch tape is made ofa high-performance composite acrylic adhesive and a strong, yetstretchable, acrylic foam core. The tape conforms to challengingapplications and locks out moisture over mismatched surfaces whencorrectly applied. ZIP System stretch tape can be pulled up andreapplied for easy, fast, and hassle-free installation that provides atight seal against weather intrusion.CompatibilityCompatible with flexible PVC usedin vinyl windowsTensile Strength225 psiElongation800-1200%Code AcceptanceIRC and IBC compliance recognizedby IAPMO ER-365ZIP System stretch tape can be used for a wide range of applicationsincluding: Window rough opening sill pans. Wall penetrations Curved window heads Cantilevered beamsPerformance StandardAAMA 711-13 compliantSIZEZIP System stretch tape is available in 75 ft (22.8 m) long rolls in a 6inch (152 mm) and 10-inch (254 mm) roll width, is 42 mils thick andis packaged with a release liner.ADVANTAGESZIP System stretch tape is a multi-purpose acrylic tape with a robustand aggressive acrylic adhesive. The intertwined polymer chainsprovide excellent internal strength and durability. The tape’sadvanced acrylic adhesive is made of highly polar molecules; theresulting attraction pulls the tape to the ZIP System panel. Thishelps the tape wet out and flow into panel ridges and produce aweather tight seal. The strong, yet stretchable, acrylic foam coreallows for continuous single-piece flashing around pipes, beams,rough openings and other difficult to flash applications. The ZIPSystem stretch tape satisfies the requirements of AC148 and AAMA711-13 as represented in IAPMO ER-365.The use of ZIP System stretch tape as flashing material is recognizedfor use on Type V construction under the IBC and non-fireresistance-rated construction under the IBC and IRC.SUBSTRATEPrior to application, ensure that the surface to be taped is dry andfree of frost, dust, dirt, loose fasteners, and other protrusions. Applytape when ambient air and substrate are above 0 F (-18 C).TAPE INSTALLATIONRefer to installation instructions on huberwood.com orhuberarchitectlibrary.com for detailed instructions and illustrationsfor application of ZIP System Stretch Tape to sheathing, flangedwindows, brick mould windows, penetrations, and openings. Applytape as additionally prescribed in IAPMO ER-365. Tape should becovered with a code-compliant roof or wall covering within 180 daysof installation. ZIP System stretch tape is a pressure sensitive tapethat must be rolled in (ZIP System Tape roller or similar) to achievemaximum bond to the panel.

WINDOWS AND PENETRATIONSROUND PENETRATION DETAILApply tape at wall openings and sheathing penetrations in mannerdescribed in window or door manufacturer’s written instructions.Details of installation recommendations are available in AutoCAD orPDF formats at ZIPSystem.com or HuberArchitectLibrary.comSTORAGE AND HANDLINGStore ZIP System stretch tape in the original packaging at atemperature not to exceed 90 F (32 C). Store in a clean, dry place.When stored as recommended in its original unopened containerthe typical shelf life for ZIP System stretch tape is 9 months from thedate of manufacture.WARRANTYZIP System stretch tape is furnished with a 30-year limited systemwarranty when used with ZIP System Sheathing. See ZIPSystem.comfor details.Install ZIP System stretchtapeZIP System tape(installed over all jointsbetween ZIP Systemsheathing)AVAILABILITYHuber Engineered Wood’s ZIP System stretch tape is availablethrough a vast network of distributors. Visit ZIPSystem.com orcontact Huber Engineered Woods for a retailer near you.MULTIPLE USES FOR ZIP SYSTEM STRETCH TAPETECHNICAL SERVICEDetailed information including specifications, product literature, testreports, installation instructions, and special applications areavailable through Huber Engineered Woods. Please visitZIPSystem.com or call 800.933.9220 x2716 to speak to a technicalrepresentative.AVAILABLE RESOURCESSection 06 16 00 SHEATHING for ZIP System Roof and Wall Sheathingproducts in CSI 3-part format is available at ZIPSystem.com orHuberArchitectLibrary.com.WINDOW INSTALLATION DETAILCreate a window pan usingZIP System stretch tape 2015 Huber Engineered Woods LLC. ZIP System is a registered trademark ofHuber Engineered Woods LLC. Huber is a registered trademark of J.M. HuberCorporati

ZIP SYSTEM SHEATHING MANUFACTURER Huber Engineered Woods LLC 10925 David Taylor Drive, Suite 300, Charlotte, NC 28262 800.933.9220 Technical Service: 800.933.9220 x2716