Transcription
“Taper-Lock” Style Bushings1008-3030Section A-AANSI “Taper-Lock” Style BushingsAll dimensions in inches unless otherwise 10161520122517252530203030 Bore Range¹ ₂-1¹ ₂-1¹ ₈¹ ₂-1¹ ₄¹ ₂-1¹ ₄¹ ₂-1³ ₈¹ ₂-1⁵ ₈¹ ₂-1⁵ ₈¹ ₂-2¹ ₂-2¹ ₂³ ₄-2¹ ₂¹⁵ ₁₆-3¹⁵ ₁₆-3A1 ²⁵/₆₄1¹ ₂1⁷ ₈1⁷ ₈22¹ ₄2¹ ₄2³ ₄3³ ₈3³ ₈4¹ ₄4¹ ₄B⁷ ₈⁷ ₈11¹ ₂111¹ ₂1¹ ₄1³ ₄2¹ ₂23D1²¹ ₆₄1²⁹ ₆₄1³ ₄1³ ₄1⁷ ₈2¹ ₈2¹ ₈2⁵ ₈3¹ ₄3¹ ₄44F(2 Required)¹ ₄ x ¹ ₂¹ ₄ x ¹ ₂³ ₈ x ⁵ ₈³ ₈ x ⁵ ₈³ ₈ x ⁵ ₈³ ₈ x ⁵ ₈³ ₈ x ⁵ ₈⁷ ₁₆ x ⁷ ₈¹ ₂ x 1¹ ₂ x 1⁵ ₈ x 1¹ ₄⁵ ₈ x 1¹ ₄All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.Std.HexKey1¹ ₈1¹ ₈1³ ₈1³ ₈1³ ₈1³ ₈1³ ₈1⁹ ₁₆1⁵ ₈1⁵ ₈1¹³ ₁₆1¹³ ₁₆ LShort Key⁵ ₈⁵ ₈¹³ ₁₆¹³ ₁₆¹³ ₁₆¹³ ₁₆¹³ ₁₆¹⁵ ₁₆111³ ₁₆1³ ₁₆Std.HexKey1¹ ₄1¹ ₄1⁵ ₈1⁵ ₈1⁵ ₈1⁵ ₈1⁵ ₈22¹ ₄2¹ ₄2¹¹ ₁₆2¹¹ ₁₆ MShort Key³ ₄³ ₄1¹ ₁₆1¹ ₁₆1¹ ₁₆1¹ ₁₆1¹ ₁₆1³ ₈1⁵ ₈1⁵ ₈2¹ ₁₆2¹ 3.204.305.808.00NOTES: All bore ranges available in 1/16th inch increments. Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller. Space required to remove bushing using jackscrews - no puller required. Standard hex key cut to minimum usable length.Metric “Taper-Lock” Style BushingsAll dimensions in millimeters unless otherwise stated.Bore 251730201416181920222425283032353840424548505 x 2.3 5 x 2.3 6 x 2.8 6 x 2.8 6 x 2.8 6 x 2.8 8 x 3.3 8 x 3.3 8 x 3.3 8 x 3.3 10 x 3.3 10 x 3.3 10 x 3.3 12 x 3.3 12 x 3.3 14 x 3.8 14 x 3.8 14 x XXXNote - X denotes that the Taper Lock Bushing is also available with metric bore size key way.All metric bores are supplied with imperial threads.All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.Sprockets E136Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
“Taper-Lock” Style Bushings3535-5050Section A-AANSI “Taper-Lock” Style BushingsAll dimensions in inches unless otherwise stated.BushingNumber3535404045455050 Bore Range1³ ₁₆ - 3¹⁵ ₁₆2⁷ ₈ - 4⁷ ₁₆1¹⁵ ₁₆ - 4¹⁵ ₁₆2⁷ ₁₆ - 5A55³ ₄6³ ₈7B3¹ ₂44¹ ₂5D4.835.546.136.72F(3 Required)¹ ₂ x 1¹ ₂⁵ ₈ x 1³ ₄³ ₄ x 2⁷ ₈ x 2¹ ₄G39 40 40 37 All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details. Std.HexKey22³ ₈2⁵ ₈2¹³ ₁₆ LShort Key1⁵ ₁₆1⁵ ₈1¹⁵ ₁₆2⁵ ₁₆Std.HexKey3³ ₈4¹ ₈4³ ₄5¹ ₄ MShort Key2¹¹ ₁₆3³ ₈4¹ ₁₆4¹³ ₁₆Weight(lbs.)11172432NOTES:All bore ranges available in 1/16th inch increments.Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.Space required to remove bushing using jackscrews - no puller required.Standard hex key cut to minimum usable length.Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caSectionESprockets E137
“QD” Style BusingsLFBDGAANSI “QD” Style BushingsBUSHINGS JA TO JBUSHINGS M TO NAll dimensions in inches unless otherwise stated.BushingJASHSDSSDSKSFEFJMNSectionEA⁵ ₁₆⁷ ₁₆⁷ ₁₆⁷ ₁₆⁹ ₁₆⁵ ₈⁷ ₈11¹ ₈1¹ ₄1¹ ₂B1³ ₈1⁷ ₈2³ ₁₆2³ ₁₆2¹³ ₁₆3¹ ₈3⁵³ ₆₄4⁷ ₁₆5⁹ ₆₄6¹ ₂7D22⁵ ₈3³ ₁₆3³ ₁₆3⁷ ₈4⁵ ₈66⁵ ₈7¹ ₄910F⁹ ₁₆³ ₄³ ₄1¹ ₄1¹ ₄1¹ ₄1⁵ ₈2¹ ₂3³ ₁₆5³ ₁₆6¹ ₄G¹ ₈¹ ₈¹ ₈¹ ₈⁷ ₃₂⁷ ₃₂¹ ₄¹¹ ₃₂³ ₈¹³ ₃₂⁹ ₁₆L11⁵ ₁₆1⁵ ₁₆1¹³ ₁₆1¹⁵ ₁₆2¹ ₁₆2³ ₄3³ ₄4⁵ ₈6³ ₄8¹ ₈ BoltCircle1²¹ ₃₂2¹ ₄2¹¹ ₁₆2¹¹ ₁₆3⁵ ₁₆3⁷ ₈55⁵ ₈6¹ ₄7⁷ ₈8¹ ₂Cap ScrewsRequired(3) #10 x 1(3) ¹ ₄ x 1³ ₈(3) ¹ ₄ x 1³ ₈(3) ¹ ₄ x 1⁷ ₈(3) ⁵ ₁₆ x 2(3) ³ ₈ x 2(3) ¹ ₂ x 2³ ₄(3) ⁹ ₁₆ x 3⁵ ₈(3) ⁵ ₈ x 4¹ ₂(4) ³ ₄ x 6³ ₄(4) ⁷ ₈ x 8StandardKeyway¹ ₂—1¹ ₂—1³ ₈¹ ₂—1¹¹ ₁₆¹ ₂—1¹¹ ₁₆¹ ₂—2¹ ₈¹ ₂—2⁵ ₁₆⁷ ₈—2⁷ ₈1—3¹ ₄1¹ ₂—3⁷ ₈2—4³ ₄2⁷ ₁₆—5¹ ₈All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details. Available Upon RequestShallowKeyway1¹ ₁₆—1³ ₁₆1⁷ ₁₆—1⁵ ₈1³ ₄—1¹⁵ ₁₆1³ ₄—1¹⁵ ₁₆2³ ₁₆—2¹ ₂2³ ₈—2¹³ ₁₆2¹⁵ ₁—3¹ ₂3⁵ ₁₆—3¹⁵ ₁₆3¹⁵ ₁₆—4¹ ₂4⁷ ₈—5¹ ₂5³ ₁₆—5¹ ₂WithoutKeyway1¹ ₄1¹¹ ₁₆222⁹ ₁₆—2⁵ ₈2¹³ ₁₆—2¹⁵ .13.116.856.068.0Metric “QD” Style BushingsAll dimensions in millimeters unless otherwise stated.Bore 4042454850558x3.3 8x3.3 8x3.3 8x3.3 10x3.3 10x3.3 10x3.3 12x3.3 12x3.3 14x3.3 14x3.3 14x3.3 XXXXXXXXXXXXXXXXXXX606518x4.4 18x4.4XXXXNote - X denotes that the QD Bushing is also available with metric bore size key way.All metric bores are supplied with imperial threads.All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.Sprockets x5.4 25x5.4 25x5.4 28x6.4XXXXXXTsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
Split Taper BushingsType 1G & H BushingsType 1B, P, Q & R BushingsType 1S BushingsType 1U BushingsType 1W BushingsType 2Set screws in “R” bushing only. No setscrews in “B”, “P” & “Q” bushings.WWWWWWType 2Type 2SectionType 2EType 2Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caSprockets E139
Split Taper BushingsANSI Split Taper BushingsAll dimensions in inches unless otherwise 11 1/412115/1615/1615/162 1/2UT1/41/413/32117/32113/323 1/217/324 3/83/42 7/84 7/86 3/421/2125/810 1/81 1/1615/168 1/411 1/41.937517/327/1631/3231/323 5/83/41 1/167 1/817/3214 1/45 1/441.17202 1/45/864 3/163/44 3/161 1/166 1/169 1/161 7/1661 7/169LargeEnd3/413/1613/16Metric Split Taper imensionsHSmallEnd1.133021.57002 1/21.85551.79302.55673.87506 3/85.76568 3/85.76568 3/85.64853 3/84 5/81 1/471 1/4771012 1/27.91443/475 3/88 3/86.10181 3/43/48 3/85.46101/21/24 5/85 3/81012 1/25/83/43/41 1/41 1/41 1/41 1/43/81/81/27/321 3/163/41/41/27/322 3/43/47/32247/163 3/47/166 3/82 1/8 - 2 5/82 7/8 - 3 3/42 7/8 - 3 5/83 1/4 - 4 1/41 7/8 - 3 3/163 1/4 - 4 3/162 3/8 - 4 1/44 3/8 - 5 1/2-4 3/8 - 5 1/24 3/8 - 52 7/16 - 4 1/47/169 3/82 1/8 - 2 11/16- 2 1/163 1/4 - 4 1/47/165 5/82 - 2 7/161 1/2 - 1 3/4- 1 7/162 3/8 - 3 1/167/165 5/8- 1 15/166 1/4 - 7 7/163 3/8 - 6 3/167/16No.1 1/2 - 1 3/4- 1 7/161 11/16 - 3 3/165/163 3/411 7/16 - 1 1/21 3/8 - 2 13/165/1611/16- 15/161 1/8 - 2 13/161/43 5/16Type 21 - 2 1/161/4Cap Screws- 1 3/83/87/322 5/165Type 11/87/81 5/161/23 1/8R3/83 3/86 3/84.26962 7/164 1/85 3/84.4180--3/85 3/83.750021 9/16X2 7/1611/164 1/82.7032W332.76573VBore Range6 1/4 - 7 7/163 3/8 - 6 3/162233Size1/433/83333x 1 1/43/8x 1 3/41/21/235/835/833445/85/8x 1 3/43484.57.51113.5x 2 3/427x 2 3/4x 2 3/4x 2 3/43/43/4x3x3953.5x 2 1/4- 2 1/4951921.8x 1 1/4WrenchTorquein. Ibs.1.31.5x1x 1 1/43/83/80.8x15/165/160.5x 3/45/1633x 1680501680401041331680168030003000All dimensions in millimeters unless otherwise stated.Bore RangeHub 2.8XXXXX248x3.3XXXXX258x3.3XXXXXNote - X denotes that the Split Taper Bushing is also available with metric bore size/keyway.All metric bores are supplied with imperial threads.All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more c Split Taper BushingsAll dimensions in millimeters unless otherwise stated.Bore RangeHub XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX18x4.4Note - X denotes that the Split Taper Bushing is also available with metric bore size/keyway.All metric bores are supplied with imperial threads.All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.Sprockets 9525x5.425x5.4XXXXXXTsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
“XT” Style Bushings“XT” style hubs & bushings have been designed specifically for conveyor pulley applications. They offer improved holding power andease of installation and removal compared to other bushing types. “XT” style hubs and bushings are available for all the major typesand sizes of conveyor pulleys.All dimensions in inches unless otherwise stated.BushingNumberXTB15DimensionsLUTCap ScrewsHV³ ₈³ ₄XTB201 ¹ ₈2 ⁷ ₈2 ⁷ ₁₆1 ¹³ ₃₂¹⁵ ₃₂¹⁵ ₁₆3 ³ ₄3 ³ ₁₆XTB251 ⁷ ₈⁵ ₈1 ¹ ₄4 ⁷ ₁₆3 ³ ₄XTB302 ¹ ₁₆¹¹ ₁₆1 ³ ₈5 ⁵ ₁₆4 ⁹ ₁₆XTB352 ¹⁵ ₃₂²⁵ ₃₂1 ¹¹ ₁₆6 ⁵ ₁₆5 ⁷ ₁₆XTB402 ¹³ ₁₆⁷ ₈1 ¹⁵ ₁₆7 ¹ ₈6 ¹ ₈XTB453 ⁵ ₁₆¹⁵ ₁₆2 ³ ₈8XTB506 ⁷ ₈3 ³ ₄12 ³ ₄10 ¹ ₈8 ⁵ ₁₆XTB704 ¹¹ ₁₆1 ⁵ ₁₆3 ³ ₈13 ¹⁵ ₁₆11 ⁹ ₁₆XTB60XTB80XTB100XTB1204 ¹ ₈5 ¹ ₈6 ³ ₁₆7 ¹ ₁₆1 ¹ ₈1 ³ ₈1 ⁹ ₁₆1 ³ ₄33 ³ ₄4 ⁵ ₈5 ¹⁵ ₁₆11 ¹⁵ ₁₆15 ⁵ ₈17 ¹⁵ ₁₆20 ⁵ ₈W³ ₁₆¹ ₄³ ₈³ ₁₆¹ ₄³ ₈¹ ₂¹ ₄³ ₈¹ ₂⁵ ₈³ ₈¹ ₂⁵ ₈³ ₄¹ ₂⁵ ₈³ ₄⁷ ₈⁵ ₈³ ₄⁷ ₈1⁷ ₈1111 ¹ ₄1 ¹ ₄1 ¹ ₂1 ¹ ₂1 ³ ₄1 ³ ₄222 ¹ ₂2 ¹ ₂39 ⁷ ₈12 ⁷ ₈15 ⁹ ₁₆18 ³ ₁₆LBore RangeT⁵ ₁₆ x 1¹ ₄1.52004³ ₈ x 1³ ₄2.63504⁷ ₁₆ x 1¹ ₂4.25507.484010.51,20014.81,68044¹ ₂ x 1³ ₄⁹ ₁₆ x 2⁵ ₈ x 2¹ ₄4³ ₄ x 2¹ ₂41x34⁷ ₈ x 2¹ ₂41¹ ₈ x 3¹ ₂81¹ ₈ x 3¹ ₂61¹ ₈ x 3¹ ₂0.727.842.866.385.7146.0216.0WrenchTorque(in. XT” Style Bushing44øV(Bolt Circle)U¹ ₄ x 1Number⁵ ₈ , ³ ₄, ⁷ ₈1, 1 ¹ ₈, 1 ³ ₁₆, 1 ¹ ₄1 ⁷ ₁₆, 1 ¹ ₂³ ₄1, 1 ³ ₁₆, 1 ¹ ₄1 ⁷ ₁₆, 1 ¹ ₂, 1 ¹¹ ₁₆1 ¹⁵ ₁₆, 21, 1 ³ ₁₆, 1 ¹ ₄1 ⁷ ₁₆, 1 ¹ ₂, 1 ¹¹ ₁₆1 ¹⁵ ₁₆, 2, 2 ³ ₁₆2 ⁷ ₁₆1 ⁷ ₁₆, 1 ¹ ₂1 ¹⁵ ₁₆, 2 ³ ₁₆2 ⁷ ₁₆, 2 ¹¹ ₁₆2 ¹⁵ ₁₆1 ¹⁵ ₁₆, 2 ³ ₁₆2 ⁷ ₁₆, 2 ¹¹ ₁₆2 ¹⁵ ₁₆3 ⁷ ₁₆2 ⁷ ₁₆2 ¹⁵ ₁₆3 ⁷ ₁₆3 ¹⁵ ₁₆3 ⁷ ₁₆3 ¹⁵ ₁₆4 ⁷ ₁₆3 ¹⁵ ₁₆, 4 ⁷ ₁₆4 ¹⁵ ₁₆5 ⁷ ₁₆, 5 ¹ ₂5 ¹⁵ ₁₆, 66 ⁷ ₁₆, 6 ¹ ₂6 ¹⁵ ₁₆, 77 ¹ ₂7 ¹⁵ ₁₆, 88 ¹ ₂, 99 ⁷ ₁₆, 9 ¹ ₂, 1010 ¹ ₂, 1111 ¹ ₂, 12H4SizeApproximateWeight(lbs.) Self seating Reduced end disc pre-stressing Minimal axial shaft movement Equally spaced bolts for uniform draw-up Capscrew torque-storing capacity ismaximized by the flange Full length engagement with the hub Full size keys in maximum bushing bore sizesof 50 and largerTsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caSprockets E141SectionE
“Taper-Lock” Style Weld-On HubsTsubaki offers the most complete line of “Taper-Lock” style weld-on hubs for insertion and welding to produce “B” style sprockets,sheaves and other applications without hub protrusion. To provide greater strength for this type of shaft locking mechanism and reduceheat distortion caused by welding, these hubs are dimensionally the same as our sprocket items. Special dimensional hubs are availableper your specifications on a made-to-order basis. All Tsubaki hubs are made from steel bar stock (not powdered or sintered metal). The“Taper-Lock” style weld-on hubs listed below include appropriate tapered bores and mounting holes.All dimensions in inches unless otherwise 1603535TLW1604545TLWSectionBushingUsed* These items have no hub 1⁵ ₈1⁵ ₈1⁵ ₈22¹ ₂22¹ ₂22¹ ₂22¹ ₂32¹ ₂32¹ ₂33¹ ₂433¹ ₂4¹ ₂DDimensionsLP3333⁵ ₈4¹ ₄3⁵ ₈4¹ ₄3⁵ ₈4¹ ₄3⁵ ₈4¹ ₄5¹ ₄4¹ ₂5¹ ₄4¹ ₄5¹ ₄6¹ ₂7³ ₄5¹ ₄6¹ ₂8³ ₄1111¹ ₄1³ ₄1¹ ₄1³ ₄1¹ ₄1³ ₄1¹ ₄1³ ₄21³ ₄21³ ₄23¹ ₂423¹ ₂4¹ ₂2⁷ ₈2⁷ ₈2⁷ ₈3⁷ ₁₆4¹ ₈3⁷ ₁₆4¹ ₈3⁷ ₁₆4¹ ₈3⁷ ₁₆4¹ ₈54¹ ₈5456¹ ₂*7³ ₄*56¹ ₄8³ ₄*T⁹ ₆₄⁷ ₃₂¹ ₄¹ ₄¹ ₄⁵ ₁₆⁵ ₁₆⁷ ₁₆⁷ ₁₆⁹ ₁₆⁹ ₁₆⁹ ₁₆¹¹ ₁₆¹¹ ₁₆⁷ ₈⁷ ₈1¹ ₈1¹ .32.74.32.64.213.025.04.012.642.0LPDETSprockets E142Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
“QD” Style Weld-On HubsTsubaki offers the most complete line of “QD” Style weld-on hubs for insertion and welding to produce “B” style sprockets, sheaves andother applications without hub protrusion. To provide greater strength for this type of shaft locking mechanism and reduce heat distortioncaused by welding, these hubs are dimensionally the same as our sprocket items. Special dimensional hubs are available per yourspecifications on a made-to-order basis. All Tsubaki hubs are made from steel bar stock (not powdered or sintered metal). The “QD” Styleweld-on hubs listed below include appropriate tapered bores and mounting holes.All dimensions in inches unless otherwise DSSKSFESFEFEEFEFJFMFJMMax.Bore1⁵ ₈1¹⁵ ₁₆2¹ ₂1¹⁵ ₁₆2¹ ₂2⁷ ₈1¹⁵ ₁₆2¹ ₂2⁷ ₈3⁷ ₁₆2⁷ ₈3⁷ ₁₆3¹⁵ ₁₆3⁷ ₁₆3⁷ ₁₆3¹⁵ ₁₆3⁷ ₁₆3¹⁵ ₁₆4⁷ ₁₆3¹⁵ ₁₆5¹ ₂3¹⁵ ₁₆4⁷ ₁₆5¹ ₂DP33¹ ₂4¹ ₄3⁵ ₈4¹ ₄53¹ ₂4¹ ₄56¹ ₄56¹ ₄76¹ ₄6¹ ₄76¹ ₄787107810DimensionsL2⁷ ₈3¹ ₈3⁷ ₈3⁷ ₁₆3⁷ ₈4⁵ ₈3¹ ₈3⁷ ₈4⁵ ₈5⁷ ₈4⁵ ₈5⁷ ₈6⁵ ₈5⁷ ₈5⁷ ₈6⁵ ₈5⁷ ₈6⁵ ₈7¹ ₂6⁵ ₈9¹ ₂6⁵ ₈7¹ ₂9¹ ₂¹³ ₁₆³ ₄1¹ ₄³ ₄1¹ ₄1¹ ₄³ ₄1¹ ₄1¹ ₄1⁵ ₈1¹ ₄1⁵ ₈2¹ ₂1⁵ ₈1⁵ ₈2¹ ₂1⁵ ₈2¹ ₂3³ ₁₆2¹ ₂5³ ₁₆2¹ ₂3³ ₁₆5³ ₁₆T⁹ ₆₄¹ ₄¹ ₄⁵ ₁₆⁵ ₁₆⁵ ₁₆⁷ ₁₆⁷ ₁₆⁷ ₁₆⁷ ₁₆⁹ ₁₆⁹ ₁₆⁹ ₁₆¹¹ ₁₆¹¹ ₁₆¹¹ ₁₆⁷ ₈⁷ ₈⁷ ₈⁷ ₈2¹ ₄1³ ₃₂1¹ ₈2¹ ionETType CDPLDPLTType B and Type C1Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON
SprocketsE136 Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca S e c t i o n E “Taper-Lock”StyleBushings 1008-3030 Std. Std. Bushing F Hex Short Hex Short Weight Number Bore Range AB D(2 Required) Key Key Key Key (lbs.)
