Transcription
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 1Floor Joist Systems/ComponentsLight-Gauge C-Joist Framing(CS/TS-Series ) .118–119TradeReady Steel Joists(TDJ and TDW Series ).120–121TradeReady Grommet (TDGR) .121TradeReady Rim (TD-Series ) .122TradeReady StructuralBlocking (TDSB) .123Floor Joist Framing AccessoriesBlock (TS/CS), Strap (DTN)and EasyClip (E- and S- Series ) .124–125EasyClip QuickTwist Web Stiffener (QTWS) .126Web Stiffener (WS) .127Simpson TensionBracing (TB27) .128TradeReady StructuralBlocking (TDSB) .128Floor Joist Hangersand ConnectorsSimpson (SJCT) 8-14 Hanger.129Simpson Bridle Hanger(SLBV/SMB).130Simpson Ledger ConnectorSystem (ICFL) .131Simpson Skewable AngleHangers (SLS5/SLS7) .132Lateral Tie Plate (LPT4) .133Foundation Clips (FDCL).134115
Floor Framing Overview10447 Floor Framing 116-117:DMF07 100-101FLOORFRAMINGOVERVIEWLight-gauge C-Studs/Joists are commonly used in floor framing assemblies. C-Joists are a cost-effective alternative to open web trusses, bar joists,engineered lumber, and cast-in-placeor hollow-core floor assemblies. Lightsteel framing (C-Joists) are ideal forlow- and mid-rise commercial applications such as hotels, motels, apartment complexes, condominiums,multi-family, and assisted living. Steeljoists are also being used more extensively in residential structures.Steel’s high strength-to-weight ratioprovides strong loading capacity andmaximum spanning capability. Joistsare commonly spaced at 12", 16",19.2" or 24" intervals and are used inconjunction with all traditionalflooring materials such as plywood,OSB, concrete filled steel deck, or oneof the many varieties of fiber reinforced cement board.Dietrich offers a variety of floor framing systems including conventionalC-Joist and the TradeReady SteelJoist System. The TradeReady SteelJoist System features large extrudedopenings in the joist to accommodateelectrical, mechanical, plumbingand technology lines. The system alsoincludes a tabbed rim track tostrengthen the joist against web crippling loads, and to provide greaterversatility and strength for ledgerapplications. This system, in conjunction with other floor sheathingproducts, provides one of the mostcost-effective systems for non-combustible low and mid-rise structures.116request a quote online@7/6/109:19 AMPage 116Floor Joist Systems/ComponentsFloor joist components are available in a varietyof web sizes, flanges, gauges and yield strengths.This wide selection of webs, flanges, gauges andyield strengths (ksi) enable the designer toobtain optimal performance at economicalprices.Dietrich’s conventional C-Joist system is madeup of joists, track, clips, web stiffeners, solidblocking and strapping to complete an entireassembly.The revolutionary TradeReady Floor System iscomprised of the TradeReady Joist with largeextruded holes, TradeReady Rim Joist with prepunched layout tabs and embedded stiffeningribs, and pre-cut structural blocking. The systemis complemented with EasyClip S- and E-series clips and web stiffeners when necessary.Floor Joist Framing AccessoriesDietrich Metal Framing offers a wide selection of floor framing accessories to ensuremaximum floor performance. Choose from our wide assortment of web stiffeners,blocking, bracing and strapping.Floor Joist Hangers and ConnectorsDietrich’s wide assortment of hangers and connectors gives you the flexibility tochoose from a variety of products that provide connection solutions to complexframing details. Choose from our universal joist, bridle, skewable and ICF hangers.The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 117OverviewThe DietrichTradeReady Floor SystemFloor Framing OverviewUse instead ofwood joists. Long-term price stability. Steel is recycled —saves trees. Eliminates floor squeakcomplaints.Prespaced joist tabs. No layout required. Eliminates joist hangers.Greater spanningcapabilities. Design flexibility. Wider O.C. spacingrequires fewer joists. Wide flange for plywoodattachement. Structural blockingprevents racking.Prepunched openings. No drilling or cuttingjoist webs. Increases ceiling height. Eliminates soffit framing.U.S. Patent Nos. 6,301,854; 6,418,694; 6,691,478 and other U.S. and foreign patents pending.For more information or to contact a sales representative, see page 3.117
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 118Light-Gauge C-Joist Framing (CS/TS Series )Conventional C-Joist componentsprovide a lightweight, low-cost,rigid floor assembly. Precut to exacting sizes and readily available. Joist sizes include 8”, 10”, 12” and 14”. Available in 18, 16, 14 and 12 gauge. Flange widths include 1-5/8”, 2”, 2-1/2” and 3”.C-JoistDietrich C-Joist components provide an economical, lightweight alternative to open web trusses, barjoists, engineered lumber, cast-in-place or hollow core floor assemblies. Depending on loads and spans,C-Joists are typically spaced at 12", 16", 19.2" or 24" on-center spacing. Structural track (TSB), usuallyin the same gauge as the joist, is used as rim or band enclosures. Joist to girder attachments arenormally supported with joist hangers, EasyClip E-Series or S-Series support clips. Web stiffenersmay be required at supports and other point loads. Solid blocking and strap bridging is required toproperly brace the floor assembly.Light-Gauge C-Joist Framing (CS/TS Series 00S300-x18 (43)16 (54)14 (68)12 (97)18 (43)16 (54)14 (68)12 (97)18 (43)16 (54)14 (68)12 (97)18 (43)16 (54)14 (68)12 gauge is standard as 33 ksi yield strength. 16, 14, 12-gauge are standard as 50 ksi yield strength.x SSMA reference of mils at the end of the character string.118request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 119Floor Joist Systems/ComponentsLight-Gauge C-Joist Framing (CS/TS Series )Structural Track (Rim)Structural Track (TS-Series gauge is standard as 33 ksi yield strength. 16, 14 and 12-gauge are standard as 50 ksi yield strength.*The depth of TSB is measured to the inside of the flanges.x SSMA reference of mils at the end of the character string.For more information or to contact a sales representative, see page 3.119
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 120TradeReady Steel Joists (TDJ and TDW Series )Next-generation, high-performance TradeReady Steel Joists are the premier floor joist systemfor both commercial and residential framing. Clear spans up to 33’. Large extruded openings to accommodate electrical,HVAC, plumbing and technology lines. Hole sizes range from 4-1/4” oval to 10” round basedon member depth. Superior strength permits wider O.C. spacing. Pre-cut to your exact specifications—no waste. Available in 7-1/4”, 8”, 9-1/4”, 10”, 11-1/4”, 12”and 14” deep members. Flange sizes include 1-3/4” and 2”. Eliminates soffit framing. UL** Listed assemblies L564, G535, G536, G551, G553 and G560.TradeReady JoistsDietrich TradeReady steel joists are one of the primarycomponents that make up the TradeReady floor system. Thesejoists feature large extruded holes that accommodate HVAC,mechanical, plumbing and sprinkler runs. The joist also featuresa series of smaller holes for electrical and technology lines.Dietrich TradeReady steel joists are precision manufacturedfrom corrosion-resistant galvanized steel. Steel joists offerconsistent quality, predictable performance and high strengthto weight ratio, and they are dimensionally stable. They won’texpand, contract or shrink; they won’t warp, crack or twist.Steel joists integrate easily with other building materials suchas structural steel, concrete, ICF and wood construction.Joists can be ordered in standard lengths or to your exactspecifications to minimize waste. Consult the Dietrich TechnicalDesign Guide or the TradeReady Steel Joist Design Guide forphysical and structural properties, span charts and loading data.TradeReady Steel Joist (TD Series nchesFlangemmInchesReturnmmTDJ3 (18 gauge)TDJ5 (16, 14 & 12 gauge)18(43)16(54), 14(68), 444.544.544.544.55/85/85/85/815.915.915.915.9TDW3 (18 gauge)TDW5 (16, 14 & 12 gauge)18(43)16(54), 14(68), 5.915.9*18-gauge is standard as 33 ksi yield strength. 16,14 and 12 gauge are standard as 50 ksi yield strength.**UL and UL Classified are trademarks of Underwriter’s Laboratories, Inc.120request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 121Floor Joist InchesWebWidthmm4-1/4" x 7"108 x 1787-1/4" TDJ8" TDJ9-1/4" TDJ10" TDW11-1/4" TDJ184 TDJ203 TDJ235 TDJ254 TDW286 TDJ6-1/4" x 9"159 x 2298" Diam.20312" TDW305 TDW10" Diam.25414" TDW356 TDWHoleShapeTradeReady Grommet protectsand isolates electrical wiring. Snaps quickly into TradeReady 12” TDW joist (all gauges) Provides 360 cable protection Simplifies cable pull through Delivers compliance with NEC Article 300.4(B)(1) andCEC Rule 12-516 Aids in the separation of cables to prevent bundling Ideal for ROMEX / NM type cables:6/2, 6/3, 8/2, 8/3, 10/2, 10/3, 12/2, 12/3, 14/2, 14/3, etc NEWITEMTradeReady GrommetTradeReady Grommets are used in construction anytime itis required by building code to protect electrical wiring.The grommet is specially designed for the 12" TradeReady Floor Joist System.TradeReady Steel Joists (TDJ and TDW Series ) and TradeReady Grommets (TDGR)TradeReady Joist (TD-Series )TradeReady Grommets 5.44UL PendingFor more information or to contact a sales representative, see page 3121
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 122TradeReady RimNext-generation TradeReady Rim has preformed tabs atstandard spacings for rapid and easyinstallation of TradeReady Steel Joists. Rims have preformed tabs at 12”, 16”, 19.2” or 24” intervalsthat eliminate layout.Eliminates or drastically reduces support clips, joist hangers and web stiffeners.Standard 16‘ lengths.Sizes include 7-1/4”, 8”, 9-1/4”, 10”, 11-1/4”, 12” and 14”.TradeReady RimDietrich TradeReady rim is another major component of the TradeReady steel floorsystem. The rim is an integral part of the system and drastically reduces framing time and effort.Rims have preformed attachment tabs at 12", 16", 19.2" or 24" O.C. spacing to eliminatelayout time. The tabs are also prepunched to ensure fast, accurate and proper fastenerplacement. Embossed stiffening ribs on each side of the preformed tabs provide additionalreinforcement, resulting in a significant reduction of web stiffeners (squash blocks) andsupport clips in a majority of applications. Once rims are installed, simply tilt up the floor joist, abut tothe tab and screw attach.U.S. Patent Nos. 6,301,854; 6,691,478; 6,418,694 and other patents pending.TradeReady Rim (TD-Series thFlange 4203235254286305356184203235254286305356TopTab Ready Rim is only available in 16' stock lengths.122request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 123Floor Joist Systems/ComponentsPrecut structural blocking that installs easilyto the underside of the joists to preventjoist rotation.Pre-cut to fit 12”, 16”, 19.2” or 24” spacing. Pre-punched holes for quick attachment. Available in 18 gauge only.TradeReady Structural Blocking (TDSB) StructuralBlockingDietrich TradeReady ‚ structural blocking is the thirdcomponent of the TradeReady steel floor system. Structuralblocking is pre-cut to fit securely between the underside ofthe floor joists to prevent joist rotation. Structural blockingis an economical alternative to cross bracing, X-bracing orstrapping. A continuous row of blocking should be installedevery 8' O.C. maximum and staggered for easy attachment.Caution: In order to prevent joist rolling, the TDSBblocking must be tied into the structure or otherwise bracedagainst lateral movement.Note: TDSB blocking is not required if sheathing is appliedto the joists top and bottom.TradeReady Structural Blocking (TDSB)DMFProductCodeGauge (Mils)ThicknessInchesDepthmmInchesEffective 488610For more information or to contact a sales representative, see page 3123
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 124Block (TS/CS), Strap (DTN) and EasyClip (E- and S-Series )Block and strap bridging is used to preventjoist rotation and lateral movement. Install immediately after joists are erectedand before construction loads are applied. Solid blocking is field cut from track or joist sections. EasyClip E-Series clips are used to attach blocksto open side of C-Joist. EasyClip S-Series clips are used to attach blockingto solid side of C-Joist.Coil StrappingDietrich block andstrap bridging isinstalled to preventjoist rotation andlateral movement.Solid blocking, afield-cut track orjoist section, iswelded or screwattached betweenthe first and lasttwo outer joist baysEasyClip EasyClip and at a maximumS-Series E-Series of 8' O.C. alongthe strap, over all interior supports and adjacent to flooropenings. Two-inch wide corrosion resistant strappingis also screw-attached or welded to the bottom of everyjoist flange. Lateral support on the top flanges is usuallyprovided by sub floor or deck material.Spacing of bridging must be calculated based on therequired strength. In general, bridging is installed at amaximum of 8' O.C. spacing perpendicular to the joists.For example, an 18' joist span would require two bridgingruns at 6' O.C. spacing.Where the sub-floor or decking does not provide lateral support,strap must also be installed on the top flange of the joist.Diagonal Tension Strapping (DTN-Series essDesign .07130.10170.8791.1461.4381.8112.583Size AvailableMin. WidthMax. 03.053.053.053.053.05200200200200200LengthDTN3 has a yield strength of 33,000 psi.DTN5 has a yield strength of 50,000 psi.Packaging may vary by region.124request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 125Floor Joist Framing AccessoriesEasyClip Support Clips (E-Series )ThicknessGaugeMilsDesign 505040EasyClip Support Clips (S-Series )DMFProductCodeThicknessGaugeMilsDesign 1-1/2 x 1-1/2 x 31-1/2 x 1-1/2 x 51-1/2 x 1-1/2 x 71-1/2 x 1-1/2 x 91-1/2 x 1-1/2 x 111-1/2 x 1-1/2 x 31-1/2 x 1-1/2 x 51-1/2 x 1-1/2 x 71-1/2 x 1-1/2 x 91-1/2 x 1-1/2 x 111-1/2 x 1-1/2 x 31-1/2 x 1-1/2 x 51-1/2 x 1-1/2 x 71-1/2 x 1-1/2 x 91-1/2 x 1-1/2 x 1138.1 x 38.1 x 76.238.1 x 38.1 x 12738.1 x 38.1 x 17838.1 x 38.1 x 22938.1 x 38.1 x 27938.1 x 38.1 x 76.238.1 x 38.1 x 12738.1 x 38.1 x 17838.1 x 38.1 x 22938.1 x 38.1 x 27938.1 x 38.1 x 76.238.1 x 38.1 x 12738.1 x 38.1 x 17838.1 x 38.1 x 22938.1 x 38.1 x k (TS/CS), Strap (DTN) and EasyClip (E- and S-Series )DMFProductCodeDiagonal Tension Strapping (DTN-Series 897ThicknessDesign 791.1461.4381.8112.583SizeMin. WidthInchesmm2222250.850.850.850.850.8Max. 20 and 18 gauge are 33,000 psi yield strength.16, 14 and 12 gauge are 50,000 psi yield strength.For more information or to contact a sales representative, see page 3125
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 126EasyClip QuickTwist Web Stiffener (QTWS)EasyClip Quick Twist Web Stiffenersprovide excellent reinforcement at criticalload points to prevent web crippling. Simple, post installation assembly. Easily rotated in-place for a tight fit. Pre-punched for easy installation of fasteners. Solid 12 gauge construction. One-piece assembly.NEWITEMEasyClip Quick Twist Web Stiffeners (QTWS) are used to providereinforcement of joist webs to prevent crippling. Web reinforcement is oftenrequired by design to enhance the load capacity of joists. The unique design ofQTWS allows the installer to insert the stiffener on the inside of the joist afterthe joist is installed. This stiffener eliminates the need to pre-insert traditionalweb stiffeners prior to joist installation.QTWSAvailable forOvernightDelivery!EasyClip Quick Twist Web Stiffener knessDesign ckagedDependentOnOrderQuantity*Dimension is nominal size. Actual product is shorter to fit inside joist.126request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 127Floor Joist Framing AccessoriesProvides excellent reinforcement at criticalload points to prevent web crippling.Prevents web crippling. Significantly enhances joist carrying capacity. Available in 14 gauge only.Web Stiffener (WS) Dietrich web stiffeners are used to provide reinforcement ofjoist webs to prevent crippling. Web reinforcement is oftenrequired by design to enhance the load capacity of joists.When installing between the joist flanges, WS web stiffenersmust be installed by sliding it in from the end of the joist. Webstiffeners must be ordered to fit specific joist web dimensions.WSAvailable forOvernightDelivery!Web Stiffener (WS)DMFProductCodeGaugeMilsThicknessDesign mmInchesmm41025-3/4 to 13-3/4146 to 349For more information or to contact a sales representative, see page 3127
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 128Simpson Tension Bracing (TB27) & TradeReady Structural Blocking (TDSB)Used in lieu of block and strap to prevent flangerotation and support flanges in compression. Eliminates multiple components. Fits 1-5/8”–3” flanges. Available for 12”, 16”, 19.2” or 24” O.C. spacing.Tension BracingAvailable forOvernightDelivery!Simpson* tension bracing is used to prevent joist compression,flange lateral movement, and rotation. These tension ties areused as an alternative to traditional block and strapping. Tensionties are traditionally used with wood framing, but can also beused with conventional C-joists.Spacing of tension bracing must be calculated based on neededstrength. In general, bracing is installed at 8' O.C. maximum.* Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.Pre-cut structural blocking provides a quick andefficient method to prevent joist rotation. Economical alternative to strapping, x-bracing or tension bridging. Pre-cut to fit 12”, 16”, 19.2” or 24” spacing. Pre-punched holes for quick attachment. Available in 18 gauge.StructuralBlockingDietrich TradeReady structural blocking is pre-cut to fit securely between the underside of floor joists to prevent joistrotation. The structural blocking is an economical alternative to cross bracing, x-bracing or strapping. A continuous row ofblocking should be installed every 8' O.C. maximum and staggered for easy attachment.CAUTION: In order to prevent joist rolling, the TDSB blocking must be tied into the structureor otherwise braced against lateral movement.TradeReady Structural Blocking pthGauge (mils)18181818(43)(43)(43)(43)request a quote online@Effective 243054064886101/21/21/21/2The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 129Floor Joist Hangers and Connectors One size fits all. Eliminates numerous SKUs. Field skewable up to 45 . Joists can be attached from either side or doubled up.Simpson (SJCT) 8–14 HangerThis premier joist hangerfeatures “one size fits all”flexibility and accommodates8"–14" deep floor joists.SJCTThe Simpson* (S/ JCT) joist hanger provides maximuminstallation flexibility. This universal hanger can be used for8"–14" deep wood or steel framing members. The hangeris easily field skewable and can accommodate up to 45 attachments. Floor joists can be attached from either sideor easily doubled up.Each hanger is pre-punched with various shaped holes forfast, easy and accurate fastener placement. Round holesare used for minimum loads, and both round and triangleholes are used for maximum loads.The SJCT joist hanger is typically used to hang joists fromwood, glue-lams, light-gauge steel or structural steel I-beams.Available forOvernightDelivery!Simpson (SJCT) 8-14 HangerDMFProductCodeSimpson ReferenceGaugeMilsThicknessDesign 131.811PackaginglbskgPcs/Box0.6000.27150* Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.For more information or to contact a sales representative, see page 3129
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 130Simpson Bridle Hanger (SLBV/SMB)Traditional hanger used to attach floorjoists to structural steel beams. Single-and double-wide hangers. Stock sizes for 8”, 10”, 12” and 14”deep joists. Other widths and depths available.Available forSimpson* bridle hangers are commonly used to attachlight-gauge C-joists to structural steel beams. Bridlehangers are easily attached with welds.OvernightDelivery!Bridle HangerPhoto illustrates SJCT Hanger. Bridle Hanger is an acceptable alternative.Simpson* Bridle Hanger (SLBV/SMB)DMFProductCodeGaugeThicknessDesign 051.0181.1311.8102525252525252525Double-wide hangers available on request. Other style hangers are available.*Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.130request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 131Floor Joist Hangers and Connectors Cost-effective connector used in ICF construction. Anchors securely within the concrete. Available in 14 gauge only.The Simpson* ledger connectorsystem is engineered to solve thechallenges of mounting steel orwood ledgers to insulated concreteform (ICF) walls. Simpson’s LedgerConnector System is easy, quickand versatile to use. Theperforations in the embedded legof the ICFL permit the concrete toflow around it, anchoring the ICFLsecurely within the concrete. Theexposed flange provides astructural surface for mountingeither a wood or steel ledger.Simpson Ledger Connector System (ICFL)This specialty hanger providesa quick, easy and versatile methodfor attaching steel rim joiststo insulated concrete forms.Ledger ConnectorAvailable forOvernightDelivery!Simpson Ledger Connector System (ICFL)DMFProductCodeGaugeMilsThicknessDesign skgPackagingPcs/Box1.810.8220* Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.For more information or to contact a sales representative, see page 3131
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 132Simpson Skewable Angle Hangers (SLS5/SLS7)Skewable utility angle used for rigid andoff-angle attachments of joists to joistsor other structural steel members. Adjustable from 0 to 135 . Bend one time only. Available in 18 gauge. ICBO ER 5275 recognized.SLS7Simpson* SLS5/SLS7 skewable utility anglesare used to make rigid attachments ofjoist-to-joist or joist-to-other-miscellaneousframing. This clip is ideal for making offangle attachments. It is easily field bentfrom 0 to 135 .Available forOvernightDelivery!CAUTION: This clip can only bebent one time.SLS5Simpson Skewable Angle Hangers sDesign 10.04511.1461.146SizeWeight/Piece*Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.132request a quote online@The place to stop before the building starts! SM
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 133Floor Joist Hangers and ConnectorsThe LTP4 Lateral Tie Plate transfersshear forces from the joist rim orblocking to the sill plate.Prepunched holes for connection accuracy. ICBO ER 5670 recognized.The Simpson* LTP4 Lateral TiePlate transfers shear forces fromthe joist rim or blocking to the sillplate. Nail holes are spaced toprevent wood splitting for singleand double top plate applications.May be installed over plywoodsheathing.Lateral Tie Plate (LTP4) Lateral Tie PlateAvailable forOvernightDelivery!Lateral Tie Plate (LTP4)DMFProductCodeGaugeMilsThicknessDesign 4-1/41080.1100.050200*Simpson is a registered trademark of Simpson Strong-Tie Company, Inc.For more information or to contact a sales representative, see page 3133
10447 Floor Framing 116-117:DMF07 100-1017/6/109:19 AMPage 134Foundation Clips (FDCL)Used to secure TradeReady Rim,structural track, end caps or paralleljoists to the building foundation. Pre-punched for easy and accurate fastener placement. Elongated slot provides for adjustable attachmentto the foundation anchor bolts. 16 gauge, G 90, 50 ksi steel.Dietrich Foundation Clips are used toprovide a strong, rigid attachment ofTradeReady Rim or conventionalstructural track to the buildingfoundation. Foundation clips aresecured to the foundation using theelongated slots, and anchor bolts. Thepre-punched leg is screw attached to theface or web of the joist. Clip spacing isbased on loading requirements.Foundation ClipAvailable forOvernightDelivery!Foundation Clips (FDCL)134DMFProductCodeGaugeMilsThicknessDesi
*18-gauge is standard as 33 ksi yield strength. 16, 14, 12-gauge are standard as 50 ksi yield strength. x SSMA reference of mils at the end of the character string. Light-Gauge C-Joist Framing (CS/TS Series ) C-Joist Conventional C-Joist components provide a lightweight, low-cost, rigid floor assembly. Precut to exacting sizes and readily .
