Transcription
FLANGED BUTTERFLY VALVESAWWA C504The Flomatic Model 45 butterfly valves are manufactured in accordance with the latest version of AWWAC504. The Azure Series butterfly valves are designed with a tight closing, rubber seated design providingbi-directional bubble tightness. The valve is suitable for throttling service and/or operation after longperiods of inactivity.Available in a size range from 3” - 24”, Flomatic’s AWWA C504 butterfly valves are hydrostatic and leaktested in accordance with AWWA C504 at Flomatic’s manufacturing plant in Glens Falls, NY.Flomatic’s AWWA C504 Butterfly Valves are available in a variety of configurations. Gear Operated, HandleOperated and Electrical Actuated (110/120 VAC standard, additional voltages available, Battery backup forpower loss positioning, and ‘Smart Card’ options for valve positioning.)Manufactured under a certified ISO 9001-2015 and ISO 14001-2015 quality and environmental systemsprogram.FEATURES &BENEFITSANSI/AWWA C504NSF/ANSI 61Pressure Class 150BFusion Bonded Epoxy Coating, Conforming to NSF 61 and AWWA Standard C550Stainless Steel ShaftV-Type Packing Design, Buna-NCorrosion Resistant Shaft ASTM A276 type 316 Stainless SteelDuctile Iron Body (ASTM A536 65-45-12) for Greater Strength and Pressure RatingHydrostatic and Leak Tested in Accordance with AWWA C504Available with lever, manual gear, pneumatic, and electric actuatorsElectrical actuators comply with AWWA C542AWWA valves include standard ISO mounting padsFOR REFERENCE USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.PLEASE REFER TO OUR WEBSITE WWW.FLOMATIC.COM FOR ADDITIONAL TECHNICAL INFORMATIONNSF Certified toNSF/ANSI 61
ADDITIONAL FEATURESAZURE SERIES 45 Upper Shaft Bearings: 304 StainlessSteel, Teflon Coated.Thrust Bearing: Nylon Shaft Support.Lower Shaft Seal: For added leakprotection.Lower Shaft Bearing: Shaft SideLoading Protection.Shaft: Keyed one piece ASTM A276type 316 stainless steel through shaftdesign providing minimal deflection.Slotted shaft top indicates position.Packing: V-type Packing design.Buna-N packing is self adjusting andwear compensating.BODY: Ductile iron ASTM A536 for greaterstrength and higher pressure rating. AWWAClass 150B short body design.PAINT: Fusion bonded epoxy powder conformingto NSF 61 and AWWA Standard C550.DISC / SHAFT CONNECTION: Two (2) taperpins providing a positive leak-proof connectionbetween the shaft and disc.VALVE DISC: Center positioned for higher flowcapability. Cast Ductile Iron ASTM A536 withstainless steel type 316 edges for strength andlonger life. Rounded machined edge for lowertorque. 3” and 4” sizes have all cast ASTM A351type 316 stainless steel disc.DISC EDGE: Stainless Steel Type 316SEAT: Standard NBR (Buna-N) (other materialsavailable) seat bonded and vulcanized tothe body of the valve in compliance withAWWA standard C504. Resilient seat fullyencapsulates the body, providing furthercorrosion protection and longer life.FOR REFERENCE USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.PLEASE REFER TO OUR WEBSITE WWW.FLOMATIC.COM FOR ADDITIONAL TECHNICAL INFORMATION
TECHNICAL DATAAZURE SERIES 45 DescriptionItem #MaterialItem #MaterialDescriptionBodyDuctile Iron A5369Packing V-TypeBuna-N2Lower Hole GasketNylon10Lower Hole GasketStainless Steel3Seat*Buna-N11Garter SpringAISI 10664Shaft316SS12Upper Bushing304SS / Teflon5DiscDuctile Iron w/316SS Edge13Lower Bushing304SS / Teflon6Pin/Nut/Wahser/O-Ring304SS/Rubber14Combined RingBuna-N7BoltsStainless Steel15Bottom Cover GasketBuna-N8WasherStainless Steel1Max Temp 180 F (82 C)Max Pressure 200psi (14bar)Max Pressure Differential 150psi (10bar)* EPDM OptionalFLOMATIC - Smart CardModel FDHC-100The Flomatic FDHC-100 is a high performance Digital positionerintended to control AC actuators, providing 450 points of resolutionwith quarter turn actuators ranging from 2 sec to 120 sec and ratedfor 25% duty or more.The FDHC-100 has many automatic advanced features that willenhance any actuator while making it easy to install and set up.The unit can be configured for various command types (4-20 mA,1-5 V, 0-5 V, 0-10 V, or a digital command) and its default operationupon loss of command. Various option modules are easily pluggedinto the unit, providing other features such as a position feedback.FEATURESPositions to 0.1 with quarter-turnactuators ranging from 2 sec to 120 secAdaptive ControlPolarity DetectionElectronic BrakeStall DetectionAutomatic Duty Cycle ControlFOR REFERENCE USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.PLEASE REFER TO OUR WEBSITE WWW.FLOMATIC.COM FOR ADDITIONAL TECHNICAL INFORMATION
AZURE SERIES 45FLANGED BUTTERFLY VALVES AZURE - MODEL 45Gear OperatedDuctile iron flanged body. ASTM A536 ductile iron disc withstainless type 316 edge. Seat standard NBR (EPDM optional)vulcanized. Designed to AWWA standard C504, class 150B.Electric / Pneumatic actuation available.TEMP MAX: 1800F (800C)NSF PRESSURE MAX: 200 PSISIZES: 3” THRU 24”Certified toNSF/ANSI 61Proof of Design AvailableAZURE - MODEL 45Electric ActuatedAzure butterfly valve, manual hand-wheel override for open/close service.ADDITIONAL OPTIONSTEMP MAX: 1800F (800C)PRESSURE MAX: 200 PSINSFSIZES: 3” THRU 24”Certified toNSF/ANSI 61 Proof of Design Available110/120 VAC standard – Inquire for other voltagesBattery backup for power loss positioning‘Smart Card’ options for valve positioning.Basic 4-20 mA input and outputCan be configured for 1-5 V, 0-5 V, 0-10 V or digital commandDefault setting for loss of commandFeedbackRepeat cycle timerLog rate controlAZURE - MODEL 45Lever OperatedDuctile iron flanged body. ASTM A536 ductile iron disc withstainless type 316 edge. Seat standard NBR (EPDM optional)bonded and vulcanized. Designed to AWWA standard C504,class 150B. Electric / pneumatic actuation available.TEMP MAX: 1800F (800C)PRESSURE MAX: 200 PSINSFSIZES: 3” THRU 24”Certified toNSF/ANSI 61Proof of Design AvailableFOR REFERENCE USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.PLEASE REFER TO OUR WEBSITE WWW.FLOMATIC.COM FOR ADDITIONAL TECHNICAL INFORMATION
Since 1933, ManufacturingThe Most Complete Line of Valves for Water and Wastewater ApplicationsFIND OUR COMPLETE VALVE OFFERING ATWWW.FLOMATIC.COMFLOMATIC CORPORATION15 Pruyn’s Island Drive, Glens Falls, New York 12801 Phone: (800) 833-2040Fax: (800) 314-3155WWW.FLOMATIC.COMLIMITED ONE YEAR WARRANTY: The Flomatic Corporation warrants that its Butterfly Valves in allsizes are free from defects in materials and workmanship. Flomatic will replace any valve covered bythis warranty found to be defective within one year from time of sale. This warranty will be void if theproduct has been modified in any way by the purchaser, or is subject to unreasonable use. All rights reserved 2020 Flomatic CorporationAZURE AWWA 3/2020 1M
The Flomatic Model 45 butterfly valves are manufactured in accordance with the latest version of AWWA C504. The Azure Series butterfly valves are designed with a tight closing, rubber seated design providing . Manufactured under a certified ISO 9001-2015 and ISO 14001-2015 quality and environmental systems program. FLANGED BUTTERFLY VALVES .
