Transcription
310/410 SeriesInline Solenoid Valves
310/410 Inline Solenoid ValvesHumphrey offers a series of 1/8-inch ported 3-way and4-way single solenoid valves. These rugged industrialvalves are designed for long hours of operation in toughworking conditions.The 310/410 Series valves feature a direct -actingmolded coil and Class B insulation system for resistanceto ambient contamination. Their poppet design isfield-proven by years of reliable service in thousands ofdemanding applications worldwide.Small size, light weight, and low power make thesevalves ideal for today’s precise, energy efficientequipment.Four-way models are available with integral dualflow controls which eliminate the need, expense, andplumbing costs of externally applied flow controls.Solid engineering and technical expertise are only thebeginning. Humphrey’s 310/410 valves have a great lookand are designed to complement the appearance of yourfinished product.Humphrey 310/410 valves meet the challenges of newtechnology’s demanding pneumatic control applications.Use them with confidence.2Humphrey 310-410 Series Inline Solenoid ValvesINDEXFeatures, Advantages and Benefits . 3310/410 Series Technical Information .4-5310/410 Series Inline General Information.6-7Valve Dimensions, Assembly Instructions.8-10410M Series Manifolds.11-12Ordering Information.13
FEATURESADVANTAGESBENEFITSDesigned for rigorous applicationsTolerant of many ambient/mediaconditions.Reliable.Small size/light weightReduced size and weight of controlvalves in your finished product.Lower material cost; lower shippingcost; less floor space in final setting.Poppet designNeeds no lubrication. Tolerates impuremedia.Performs in adverse conditions.Humphrey solenoid designField-proven in thousands ofapplications.Proven performance.310 Normal310 Actuated410 Normal410 Actuated410-70 Normal410-70 ActuatedMolded coil and electronicover ride sealBoth internal and external resistance tosolenoid contamination.Reliable.Positive stop of solenoid armaturePrevents excessive impact and poppetovertravel.Long product cycle life.Short strokeFast response.Rapid cycling.Integral flow controls on model410-70Permits individual control of eachexhaust in common exhaust port.Eliminates need, cost and plumbing ofexternal flow controls.Pressure balancedPermits connection of pressure toany port.Great versatility.Consistent effective surface areasSame flow from IN to OUT and fromOUT to EXH ports.Uniform flow in all modes of use.Universal mounting bracketOne bracket adapts to all 310/410models.Efficient, versatile and reducedinventory.Attractive valve appearanceComplements appearance of yourproduct.Contemporary, trim look.Humphrey 310-410 Series Inline Solenoid Valves3
HUMPHREY 310/410 SERIES SOLENOID VALVES4Humphrey 310-410 Series Inline Solenoid Valves
Model HS2.Model HS2LED.HS2HS2LEDHumphrey 310-410 Series Inline Solenoid Valves5
HUMPHREY 310/410 SERIESINLINE SOLENOID VALVES6Humphrey 310-410 Series Inline Solenoid Valves
Humphrey 310-410 Series Inline Solenoid Valves7
310 SOLENOID VALVES8Humphrey 310-410 Series Inline Solenoid Valves
410 SOLENOID VALVESHumphrey 310-410 Series Inline Solenoid Valves9
410-70 SOLENOID VALVES10Humphrey 310-410 Series Inline Solenoid Valves
410M SERIES MANIFOLDSHumphrey’s 310 and 410 Body Ported Inline Valvesinclude through holes for mounting to 410Mmanifolds. Manifold accepts valves with lead wireor DIN type electrical entry.410M Manifolds are low profile, cost effective, andideal for OEM applications. Manifolds are shippedwith valve gaskets and screws.3-port valves may be oriented on the manifoldas normally closed or normally open function.310 (V310)Normally Closed OrientationDIN Electrical Entry310 (V310)Normally Open Orientation24” Lead Wire Electrical Entry410 (410-70)Standard Orientation24” Lead Wire Electrical Entry410M-SSPSeparate Supply & Exhaust PlateUse with 410M-IPK410M-BOPManifold Block Off Plate410M-IPK (2 SHOWN)Pressure Isolator Plug(Insert & Lock into Position)6-STATION MANIFOLD Standard Model 310and 410 Inline valvesincorporate 0.11” diameter,counterbored mountingholes, permitting mountingof inline valves to the 410Mmanifold. Manifolds are availablein 2, 4, 6, 8 or 12 stationlengths and furnishedwith a 410M-VMK (ValveMounting Kit/two “O”rings and two screws) perstation. Consult factory forother manifold lengths. Manifold galley stamped1 is common media supplyport. Galley stamped 3 iscommon vent/exhaust port.Isolator plug 410M-IPKoption permits isolation ofgalleys for separation ofpressure/media/exhaust. Three-way valve Model310 mounting orientationto manifold determinesnormally closed (NC)or normally open (NO)function.Note: Valve port 1 islocated nearest to valve’ssolenoid/coil.Humphrey 310-410 Series Inline Solenoid Valves11
410M SERIES MANIFOLDSDIMENSIONS Dimensions in Millimeters (mm) Material: Aluminum Alloy 6065 TS Extrusion (Anodized)STATION TO STATION SPACING 19.2O 4.22 PLACESDIN RAIL CONNECTORSAVAILABLE,SEE 8.89.61/4" NPT ( x2 )28.120.0#3-48 UNC THD ( x3 )DEPTH 5 mm145.212-12 STATIONS ( 6 STATION MANIFOLD SHOWN )19.013.811.69.9ACCESSORIESVALVE MOUNTING KIT410M·VMKMounting screws andO-ring seals. Two (2)each furnished witheach manifold station.Order separately asModel 410M-VMK.MANIFOLD STATIONBLOCK-OFF PLATE410M·BOPAnodized aluminumplate furnished withBuna O-ring seals (2)and black oxide coatedsteel screws (2).SEPARATE AIR SUPPLYPLATE410M·SSPAnodized aluminumplate furnished withBuna O-ring seals (2)and black oxide coatedsteels crews (2).DIN RAIL CONNECTORSDRCKit includes(2) clipsand (2) screwsPIPE PLUGSAvailable for unusedports.1/8 pipe (P/N 130-31)1/4 pipe (P/N 130-15)ISOLATOR PLUG INSTALLATIONP1HS2HS2LED-(VOLTAGE)ELECTRICAL SOCKETSSockets for Code 39 DIN electrical entry availablewith LED (HS2LED-voltage) or without (HS2)indicator light. See website for details.12P2Humphrey 310-410 Series Inline Solenoid ValvesISOLATOR PLUG410M·IPKMaterials: Brass,Synthetic rubberISOLATOR PLUG INSTALLATION For application requiring two differentpressures or pressure and vacuum. Insert plug into gallery, and when oriented,tighten crew to compress plug, forcing O-ringagainst gallery wall. Torque screw to 15-20 Kg/cm. Be careful notto over torque the screw.
ORDER INFORMATION310/410 Series Inline Body Ported Valves1/8-inch ports, 2-way, 3-way, 4-wayVALVESOption DescriptionTwo-WayModelNOTE 1NOTE 2WithMountingBracketNOTE 1ConduitLockingNoDIN-TypeFlowConnector ConnectorManual ManualControls(24"ends)Override Override72"LeadWiresRotatedCoil(180 )FluorocarbonSealsLLRCVAIVoltageOption Code23103-way, InlineV310 Vacuum3-way, Inline4104-way, Inline213639SP708187NASPSPSPNASPSPSPSPNOTE: Standard valves are furnished with 24” flying lead wires and a non-locking manual override.NOTE 1: 1/8” plug for 2-way and code 21 mounting bracket are furnished unattached to the valve.NOTE 2: To specify metric ports, add an “E” prefix (i.e. E310 or EV310).N/C No chargeNA Not availableSPSP12 VDC24 D StandardSP Specify; Additionalcharge for this optionACCESSORIESModelDescription8-288AUniversal mounting bracket130-311/8” pipe plugHS2DIN receptacle for use with code 39 connector.HS2LEDLighted DIN receptacle for use with code 39 connector. Specify: 12V, 24V or 120VHOW TO ORDERStarting with Model Number, specify options in order from left to right.Examples:Model 310-2-21-LL 12VDC2-Way Operation(310-2)Mounting Bracket(310-2-21)72” Flying Leads(310-2-21-LL)Voltage 12VDC(310-2-21-LL 12VDC)Model 410-21-70-87 120/50/60Mounting Bracket(410-21)Flow Controls(410-21-70)No Manual Override(410-21-70-87)Voltage 120/50/60(410-21-70-87 120/50/60)310 and 410 Body Ported Inline Valves include through holes formounting to 410M manifolds. Manifolds accept valves with standardlead wire or optional DIN type electrical entry. See page 11.ModelNumber of Stations (2 thru 12)410MOrder Example:410M6Humphrey 310-410 Series Inline Solenoid Valves13
HUMPHREY-PRODUCTS.COMA privately owned US company since 1901. 2021 Humphrey Products CompanyCertified: ISO 9001:2015310410INLINE21Humphrey Products Company5070 East N AvenueKalamazoo, MI 49048 USAP: 269.381.5500F: 269.381.4113
410-70 Efficient, versatile and reduced inventory. One bracket adapts to all 310/410 models. Universal mounting bracket Short stroke Fast response. Rapid cycling. Same flow from IN to OUT and from Uniform flow in all modes of use. OUT to EXH ports. Consistent effective surface areas Humphrey 310-
