Transcription
Microsoft70-410Installing and Configuring Windows Server 2012http://killexams.com/exam-detail/70-410
QUESTION: 159A company’s server virtualization team needs to provision a series of Hyper-Vworkloads to use existing network storage arrays. The team has chosen to use FibreChannel ports within the guest operating systems. Which of the following WindowsServer versions can be used as guest operating systems when using Hyper-V FibreChannel ports?A. 2003 R2B. 2008C. 2003D. 2012Answer: B, DExplanation:Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems whenusing Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers areneeded along with NPIV-enabled (N Port ID Virtualization) SANs. Quick Tip: VirtualFibre Channel logical units cannot be used as boot media.QUESTION: 160Your network contains an Active Directory domain named contoso.com. The domaincontains two servers named CONT1 and CONT2. Both servers run Windows Server2012 R2. CONT1 has a shared printer named Printer1. CONT2 connects to Printer1 onCONT1. When you attempt to remove Printer1 from CONT2, you receive the errormessage shown in the exhibit. (Click the Exhibit button.)You successfully delete the other printers installed on CONT2. You need to identifywhat prevents you from deleting Printer1 on CONT2. What should you identify?112
A. Printer1 is deployed as part of a mandatory profile.B. Printer1 is deployed by using a Group Policy object (GPO).C. Your user account is not a member of the Print Operators group on CONT2.D. Your user account is not a member of the Print Operators group on CONT1.Answer: BQUESTION: 161Your network contains an Active Directory forest. The forest contains two domainsnamed contoso.com and corp.contoso.com. All domain controllers run WindowsServer 2012 R2 and are configured as global catalog servers. The corp.contoso.comdomain contains a domain controller named DC1. You need to disable the globalcatalog on DC1. What should you do?A. From Active Directory Users and Computers, modify the properties of the DC1computer account.B. From Active Directory Administrative Center, modify the properties of the DC1computer account.C. From Active Directory Sites and Services, modify the NTDS Settings of the DC1server object.D. From Active Directory Domains and Trusts, modify the properties of thecorp.contoso.com domain.Answer: CExplanation:To add or remove the global catalog Open Active Directory Sites and Services. Toopen Active Directory Sites and Services, click Start, click Administrative Tools, andthen click Active Directory Sites and Services. To open Active Directory Sites andServices in Windows Server 2012, click Start, type dssite.msc. In the console tree,click the server object to which you want to add the global catalog or from which youwant to remove the global catalog. Where? Active Directory Sites andServices\Sites\SiteName\Servers In the details pane, right-click NTDS Settings of theselected server object, and then click Properties. Select the Global Catalog check boxto add the global catalog, or clear the check box to remove the global catalog.QUESTION: 162Your network contains an Active Directory domain named adatum.com. The domaincontains several thousand member servers that run Windows Server 2012 R2. All ofthe computer accounts for the member servers are in an organizational unit (OU)named Servers Accounts. Servers are restarted only occasionally. You need to identifywhich servers were restarted during the last two days. What should you do?113
A. Run dsquery computer and specify the -stalepwd parameterB. Run dsquery server and specify the -o parameter.C. Run Get-ADComputer and specify the lastlogon property.D. Run Get-ADComputer and specify the SearchScope parameterAnswer: CQUESTION: 163You have a server named Server1 that runs Windows Server 2012 R2. You plan tocreate an image of Server1. You need to remove the source files for all server rolesthat are not installed on Server1. Which tool should you use?A. servermanagercmd.exeB. imagex.exeC. ocsetup.exeD. dism.exeAnswer: DExplanation:servermanagercmd.exe – The ServerManagerCmd.exe command-line tool has beendeprecated in Windows Server 2008 R2. imagex.exe – ImageX is a command-line toolin Windows Vista that you can use to create and manage Windows image (.wim) files.A .wim file contains one or more volume images, disk volumes that contain images ofan installed Windows operating system. dism.exe – Deployment Image Servicing andManagement (DISM.exe) is a command-line tool that can be used to service aWindows image or to prepare a Windows Preinstallation Environment (Windows PE)image. It replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg that wereincluded in Windows Vista. The functionality that was included in these tools is nowconsolidated in one tool(DISM.exe), and new functionality has been added to improvethe experience for offline servicing. DISM can Add, remove, and enumerate packages.ocsetup.exe – The Ocsetup.exe tool is used as a wrapper for Package Manager(Pkgmgr.exe) and for Windows Installer (Msiexec.exe). Ocsetup.exe is a commandline utility that can be used to perform scripted installs and scripted uninstalls ofWindows optional components. The Ocsetup.exe tool replaces the Sysocmgr.exe toolthat Windows XP and Windows Server 2003i use. The Dism utility can be used tocreate and mount an image of -us/library/cc749447(v ary/dd744382(v ws.10).aspxTraining Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2:Deploying Servers, p. 44Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1:Installing and Configuring Servers, p. 19-22114
QUESTION: 164Your network contains an Active Directory domain named adatum.com. The domaincontains a server named Server1 that runs Windows Server 2012 R2. On a servernamed Core1, you perform a Server Core Installation of Windows Server 2012R2.You join Core1 to the adatum.com domain. You need to ensure that you can useEvent Viewer on Server1 to view the event logs on Core1. What should you do onCore1?A. Run the Enable-NetFirewallRule cmdlet.B. Run the Disable-NetFirewallRule cmdlet.C. Install Windows Management Framework.D. Install Remote Server Administration Tools (RSAT).Answer: AExplanation:Event Viewer is a DCOM service which you can enable by either using sconfig toconfigure remote management or, if you only wish to change the firewall rule forDCOM, enabling the DCOM inbound firewall rule via PowerShell or WindowsFirewall with Advanced Security.QUESTION: 165You work as a senior administrator at Contoso.com. The Contoso.com networkconsists of a single domain named Contoso.com. All servers on the Contoso.comnetwork have Windows Server 2012 R2 installed, and all workstations have Windows8 installed. You are running a training exercise for junior administrators. You arecurrently discussing a Windows PowerShell cmdlet that activates previously de activated firewall rules. Which of the following is the cmdlet being discussed?A. Set-NetFirewallRuleB. Enable-NetFirewallRuleC. Set-NetIPsecRuleD. Enable-NetIPsecRuleAnswer: BExplanation:Enable-NetFirewallRule – Enables a previously disabled firewall rule.QUESTION: 166Your network contains an Active Directory domain named adatum.com. The domaincontains the servers shown in the following table.115
You need to ensure that you can use Server Manager on DC1 to manage DC2.Which two tasks should you perform? (Each correct answer presents part of thesolution. Choose two.)A. Install Microsoft .NET Framework 4 on DC2.B. Install Remote Server Administration Tools on DC1.C. Install Remote Server Administration Tools on DC2.D. Install Windows Management Framework 3.0 on DC2.Answer: A, DExplanation:Windows Management Framework 3.0. To use this release of Server Manager toaccess and manage remote servers that are running Windows Server 2008 or WindowsServer 2008 R2, you must first install .NET Framework 4.0, and then install WindowsManagement Framework 3.0 on those servers. Note: In Windows Server 2012 R2, youcan use Server Manager to perform management tasks on remote servers. Remotemanagement is enabled by default on servers that are running Windows Server 2012R2. To manage a server remotely by using Server Manager, you add the server to theServer Manager server pool. You can use Server Manager to manage remote serversthat are running Windows Server 2008 and Windows Server 2008 R2, but thefollowing updates are required to fully manage these older operating systems (seeabove).Reference:Configure Remote Management in Server Manager.116
For More exams visit https://killexams.com/vendors-exam-listKill your exam at First Attempt.Guaranteed!
70-410 Dumps, 70-410 Braindumps, 70-410 Real Exam Questions, 70-410 Practice Test Created Date: 5/21/2019 12:41:58 AM .
