Transcription
Dell PowerEdge R630Owner's ManualRegulatory Model: E26S SeriesRegulatory Type: E26S001
Notes, cautions, and warningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells youhow to avoid the problem.WARNING: A WARNING indicates a potential for property damage, personal injury, or death. 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectualproperty laws. Dell and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All othermarks and names mentioned herein may be trademarks of their respective companies.2016 - 03Rev. A03
Contents1 Dell PowerEdge R630 system overview. 9Supported configurations for the PowerEdge R630 system.9Front panel.1010 x 2.5-inch hard drive chassis. 11Eight x 2.5-inch hard drive chassis.1324 x 1.8-inch hard drive chassis. 15LCD panel.17Back panel.19Two-riser chassis. 19Three-riser chassis.21Diagnostic indicators. 23Hard drive indicator codes.25uSATA SSD indicator codes. 26NIC indicator codes.27Power supply unit indicator codes. 27iDRAC Direct LED indicator codes. 30Quick Sync indicator codes. 32Locating Service Tag of your system. 332 Documentation resources. 343 Technical specifications. 37Chassis dimensions. 37Chassis weight.38Processor specifications. 38PSU specifications.38System battery specifications. 39Expansion bus specifications.39Memory specifications.39Drive specifications.40Hard drives. 40Optical drive. 40Ports and connectors specifications.40USB ports.40NIC ports. 41Serial connector.41VGA ports. 41Internal Dual SD Module. 413
Video specifications.41Environmental specifications. 41Particulate and gaseous contamination specifications. 43Standard operating temperature. 44Expanded operating temperature. 44Expanded operating temperature restrictions. 454 Initial system setup and configuration.46Setting up your system. 46iDRAC configuration. 46Options to set up iDRAC IP address. 46Options to install the operating system. 47Methods to download firmware and drivers. 475 Pre-operating system management applications.49Options to manage the pre-operating system applications. 49System Setup.49Viewing System Setup.50System Setup details. 50System BIOS.51iDRAC Settings utility.74Device Settings. 75Dell Lifecycle Controller. 75Embedded system management. 75Boot Manager. 75Viewing Boot Manager. 75Boot Manager main menu. 76PXE boot. 776 Installing and removing system components. 78Safety instructions. 78Before working inside your system. 78After working inside your system. 79Recommended tools. 79Front bezel (optional). 79Removing the optional front bezel.79Installing the optional front bezel. 81System cover. 82Removing the system cover. 82Installing the system cover. 83Inside the system. 84Cooling shroud.874
Removing the cooling shroud. 87Installing the cooling shroud. 88System memory. 88General memory module installation guidelines.90Mode-specific guidelines. 91Sample memory configurations. 92Removing memory modules. 95Installing memory modules. 96Hard drives. 98Removing a 2.5-inch hard drive blank. 98Installing a 2.5-inch hard drive blank. 99Removing a 1.8-inch hard drive blank. 100Installing a 1.8-inch hard drive blank. 100Removing a hot swappable hard drive or SSD. 101Installing a hot swappable hard drive. 103Removing a hard drive from a hard drive carrier. 104Installing a hot swappable hard drive into a hot swappable hard drive carrier. 105Removing a 1.8-inch hard drive from a hard drive carrier. 106Installing a 1.8-inch hard drive into a hard drive carrier. 107Optical drive (optional).107Removing the optional optical drive. 107Installing the optional optical drive. 108Removing the slim optical drive blank. 109Installing the slim optical drive blank.110Cooling fans. 111Removing a cooling fan. 111Installing a cooling fan.112Internal USB memory key (optional). 113Replacing the optional internal USB memory key.113Expansion cards and expansion card riser.115Expansion card installation guidelines. 115Removing expansion card risers. 116Removing an expansion card.118Installing an expansion card. 119Installing expansion card risers.120SD vFlash media card (optional). 122Replacing an SD vFlash card. 122Internal dual SD module (optional).123Removing an internal SD Card.123Installing an internal SD card. 124Removing the optional internal dual SD module.124Installing the optional internal dual SD module .1265
Integrated storage controller card. 128Removing the integrated storage controller card. 128Installing the integrated storage controller card. 130Network daughter card. 132Removing the network daughter card.132Installing the network daughter card.133Processors and heat sinks.135Removing a heat sink. 135Removing a processor. 136Installing a processor. 140Installing a heat sink.141Power supply units. 143Hot spare feature.144Removing the power supply unit blank.144Installing the power supply unit blank.145Removing an AC power supply unit. 146Installing an AC power supply unit. 147Wiring instructions for a DC power supply unit.148Removing a DC power supply unit. 151Installing a DC power supply unit. 152System battery. 153Replacing the system battery.153Hard drive backplane. 155Removing the hard drive backplane. 155Installing the hard drive backplane.162Control panel assembly.
Dell PowerEdge R630 system overview The Dell PowerEdge R630 rack servers support up to: Two Intel Xeon E5-2600 v3 or v4 processors 24 x 1.8-inch hard drives or 10 x 2.5-inch hard drives or eight x 2.5-inch hard drives Four optional NVMe Express Flash PCI
