Transcription
AREARAPTOR 3Shaping the future of sports floodlightingThe ultimate Aussie-engineered sports floodlight is a high-performingfloodlight with leading optical control and innovative design. RAPTOR 3will provide better spill control and less windage for sports venues as wellas other large areas. With razor-sharp reflector systems and asymmetricdistribution – four new beam options, the RAPTOR 3 is born to perform.Its versatile mounting system, with its heavy-duty trunnion arm, RAPTOR3 is compatible with under and over slung mounting arrangement.RAPTOR 3 has cutting-edge technology to offer uniformity and visualcomfort for players, spectators, and neighbours (low glare and minimisedlight spill). RAPTOR 3 is fully compatible with Schréder ITERRA SportsControl System.SPORTSCAR RPORTAPRONS
RAPTOR 3 SUMMARYMAIN APPLICATIONSKEY ADVANTAGES Sports Designed in Australia for Australian andNew Zealand conditions Car parks Large areas Industrial Airport aprons Transit hubs High lumen efficacy over 135lms/w Precision reflector systems, designedto control spill light Asymmetric distribution, with fourbeam options Available in CCT 5700K & 4000K CRI 70 Two driver models available:Precision optical design, controlling spilllightElectronic DALI 2 240-400VacIP66, can be installed remotelyup to 200m or located ontrunnion arm with mountingbracketsHybrid Driver installed remotelyup to 2KM, 240V and 415VSuitable for ambienttemperatures up to 70ºC Compatible with Schréder ITERRASports Control System, when usedwith the Electronic DALI 2 Driver Die-cast aluminium body, UV stabilizedpowder coated for durability Colour: black heatsink with grey framePrecise aiming with protractor and lockingdevice Optimal reliability with 5 year warranty All exposed cabling has bird proofconduit Supplied with bird spikesHeavy duty trunnion arm, suitable forunder and over slingingDie cast aluminium heat sink for excellentthermal managementCopyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.RAPTOR 3 2
RAPTOR 3 CHARACTERISTICSGENERAL INFORMATIONELECTRICAL INFORMATIONRecommendedinstallation height15m to 40m 50' to 130'Electrical classClass 1Driver includedNoNominal voltage240V/415V – 50Hz/60HzRCM MarkYesPower factor (at full load) 0.98 - Electronic DALI 2 Driver 0.95 - Hybrid DriverROHS compliantTesting standardYesSystem wattage4 module 1200WAS/NZS 60598.1:2017Surge protection (kV)10kVElectromagnetic compatibility(EMC)AS/NZSCISPR15,AS/NZS 60598.1Control protocol(s)DALI-2 and 50% switch DIM forHybrid GearAssociated control system(s)Schréder ITERRASensor(s)Devices & sensors for smartcity applicationsHOUSING AND FINISHHousingDie-cast LM6 aluminium frameOpticHigh temperature vacuummetalised reflectorProtectorTempered glassHousing finishPowder coated finishStandard colour(s)RAL9011Tightness levelIP 66Impact resistanceIK 06PERFORMANCELumen efficacyOPTICAL INFORMATIONLED colour temperature5700K & 4000KColour rendering index (CRI) 70Asymmetrical distributionsA0 Extra Narrow, A1 Narrow, A2Medium, A3 Wide135lms/wOPERATING CONDITIONSTemperature range fromoperation (Ta)-20 C to 40 CLIFETIME OF THE LEDS @ TA 40 CAll configurationsCopyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.120,000h - L90RAPTOR 3 3
RAPTOR 3 CHARACTERISTICSDIMENSIONS AND MOUNTINGL x W x H (mm)741 x 594 x 171Weight (kg)28.3Aerodynamic resistanceWindage (m2)0.115 (at tilt of 0 )0.17 (at tilt of 13 )Raptor with A0 hood:0 0.13245 0.13910 0.17615 0.211Raptor with A1, 2, 3 hood:0 0.16645 0.18110 0.22415 0.266Mounting possibilitiesGalvanised trunnion arm for under and over slinging215945462005203-ø741245166889Copyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.RAPTOR 3 4
RAPTOR 3 ORDER CODESProduct LG3RAPTOR 3 1200W A0 BEAM CRI70 CCT5700K NO GEARAsymmetric A0 Extra Narrow57001200SR4H757A1LG3RAPTOR 3 1200W A1 BEAM CRI70 CCT5700K NO GEARAsymmetric A1 Narrow57001200SR4H757A2LG3RAPTOR 3 1200W A2 BEAM CRI70 CCT5700K NO GEARAsymmetric A2 Medium57001200SR4H757A3LG3RAPTOR 3 1200W A3 BEAM CRI70 CCT5700K NO GEARAsymmetric A3 Wide57001200SR4H740A0LG3RAPTOR 3 1200W A0 BEAM CRI70 CCT4000K NO GEARAsymmetric A0 Extra Narrow40001200SR4H740A1LG3RAPTOR 3 1200W A1 BEAM CRI70 CCT4000K NO GEARAsymmetric A1 Narrow40001200SR4H740A2LG3RAPTOR 3 1200W A2 BEAM CRI70 CCT4000K NO GEARAsymmetric A2 Medium40001200SR4H740A3LG3RAPTOR 3 1200W A3 BEAM CRI70 CCT4000K NO GEARAsymmetric A3 Wide40001200g\0405 - Optical\Glare DRG. No.REAR BAFFLEANIAAll dimensions inmillimetres.Do not scale.PRODUCT.E02-14-067-549A3SCALE:PROJECT.PART No.ANCE.mmmmBRITELINE RAPTOR96 - 112 Gow StreetPadstow NSW 2211Tel: (02)9794 9300Fax: (02) 9790 8055DESTROY ALL PREVIOUS ISSUESDESCRIPTIONDRN,ACCESSORIES - RAPTOR 3 Hood AccessoriesDATEing\0405 - Optical\Glare baffles-external\REAR BAFFLEANIANOTES:All dimensions inmillimetres.Do not scale.PRODUCT.RANCE.mm5mmmmBRITELINE RAPTOR96 - 112 Gow StreetPadstow NSW 2211Tel: (02)9794 9300Fax: (02) 9790 805533.0 DESTROY ALL PREVIOUS ISSUESDESCRIPTIONDRN,DATEI:\Gerard Lighting\ILP-Eng\MASTER\SYD-14-067 Briteline LED\04 - Engineering\0405 - Optical\Glare baffles-external\QUANTITY PER PARTREV.BRIGHTLINE RAPTOR 1200Fax: (02) 9790 8055Tel: (02)9794 9300Padstow NSW 221196 - 112 Gow StreetDESCRIPTIONDESTROY ALL PREVIOUS 140.1330.1710.1900.1110.0 X 45 0.152NOTES:PRODUCT.Do not scale.millimetres.All dimensions inDRN,10.0 X 45 0R5.089.8160 163.4UP 90 R 1ACCESSORIES - SIDE AND BACK SHIELD KITRAPTOR 1200 SIDE AND BACK SHIELD KIT197.15.5 (x3)20.040.0R5.0 (x2)182.2SR4HSIDESHIELD11 x 6 Obround (x9)48.8L 800 x W 315 x H 155mm2.4kgMAY NOT BE REPRODUCED IN ANY WAY WITHOUT PRIOR PERMISSION. COPYRIGHT: ANDTHIS DRAWING IS ISSUED BY GERARD LIGHTING PTY. LTD. ON THE UNDERSTANDING THAT IT IS STRICTLY CONFIDENTIALACCESSORIES - DRIVER MOUNTING BRACKETSR4HDRVBKT8.10DOWN 20 R 1DOWN 90 R 1DATE53.2 -10.00 - 0.1mm0.0 - 0.25mm - 0.5mm0.DIMENSION TOLERANCE.47.219.4DESCRIPTIONBLANK SHEET USED (MATERIAL)L 515 x W 315 x H 151mmPROTOTYPE33.0RAPTOR 1200 BACK SHIELD KITCUSTOMER.STATUS:DRG. No.14.0ITEM No.TIME (PARTS PER HOUR)4. FINISH - P/C MATT BLACK3. TO BE FREE FROM BURRS AND SHARP EDGES.2. ALL BENDS TO BE 90 ON MIN RADIUS U.N.O.1. MATERIAL - 1.0 MM INGA3SCALE:02-14-067-544HOODA1/A2/A3GLARE BAFFLESIDE 15 DEGSYLVANIAW/CACCESSORIES - BACK SHIELDPROJECT.PART No.53.2CUT /01/2018DATE.CHECKED:DRAWN:8.10CUT1. MATERIAL - 1.0MM ZNSEAL2. ALL BENDS TO BE 90 ON MIN RADIUS U.N.O.3. TO BE FREE FROM BURRS AND SHARP EDGES.10114.0 4. FINISH - P/C MATT BLACKBENDSR5.0112PE4.5kgA3L 936mm x W 520mm x H110mmSCALE:RAPTOR 3 1200 APRON HOOD A1/A2/A31. MATERIAL - 1.0MM ZNSEALDRG.No.2. ALL BENDS TO BE 90 ONMINRADIUS U.N.O.3.990TO BE FREE FROM BURRS02-14-067-549AND SHARP EDGES.4. FINISH - P/C MATT BLACKSR4HAPNHDA1G3APRON HOOD A0PROJECT.3.5kgPART No.L 786mm x W 520mm x H 45mmDATE:15/01/2018RAPTOR 3 1200 APRON HOOD A0DATE.15/01/2018SR4HAPNHDA0G3RAPTOR 3 1200W Driver Mounting BracketCopyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.5.5kgRAPTOR 3 5
RAPTOR 3 CONTROL GEARELECTRONIC CONTROL GEAREXTREME HYBRID CONTROL GEAR Nominal input voltage: 240-400Vac IP20 and IP65 models available 2 independent output channels 240V and 415V options Output current range 1250-2100 mA (per outputchannel) Optional accessory offering 50% dimming 5C E cable between driver and luminaire DALI-2 programmable Output voltage range 200 – 400 VDC (per outputchannel) IEEE 1789 Flicker Recommended PracticeCompliant Max remote distance 200 meters High immunity to surges, low inrush /leakage current Surge level 10 kV for both common mode anddifferential mode Adaptable thermal protection for LED Modules Lifetime: 50.000 hours at maximum load Requires a two core cable Earth between the driverand luminaire, providing an ideal solution for HIDFloodlight retrofits. Installation of earthing is requiredas per Australian Standards Short circuit, overpower, over voltage protections Remote firmware update IP66 enclosure 2C E cable between driver and luminaire Maximum distance between gear and floodlight:1.5mm2 cable 500m2.5mm2 cable 850m4.0mm2 cable 1400m6.0mm2 cable 2100m The Extreme LED Hybrid control gear has beendesigned to match the footprint of the existing HIDcontrol gear For new installations, the distance between thecontrol gear and the floodlight has been greatlyimproved. This offers benefits for both installationand maintenance Proven to offer protection in extreme environmentswith up to 70 C ambient temperature, for IP20 GEN2 model. Offering high immunity to surges and lowinrush/leakage currentVoltage (V)DimmingCode Number240Optional Switch DimmingSR4HERWP01T (IP65)(HYBRID CONTROL GEAR)Signal: OFF 100% ON 50%SR4HERGT01TG2 (IP20)415Optional Switch DimmingSR4HFRWP01T (IP65)(HYBRID CONTROL GEAR)Signal: OFF 100% ON 50%SR4HFRGT01TG2 (IP20)DALI-202-07-677240-400(ELECTRONIC DRIVER)Copyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.RAPTOR 3 6
RAPTOR 3 CONTROL GEARDIMENSIONS AND ORDER CODESProduct CodeNameControlVoltage (V)Weight (kg)DimensionsLxWxH(mm)02-07-677Electronic DriverDALI-2240-4005.77500 x 150 x 120Electronic Control Gear Dimensionswww.enedopower.comPage 6DS RHPS576AKS-U 1260W DA Rev02, Dec 2020Copyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.RAPTOR 3 7
RAPTOR 3 CONTROL GEARDIMENSIONS AND ORDER CODESProduct CodeNameOptional ControlIP RWP01TW/P BOX CONTROL GEAR RAPTOR 3WIRE 240V 10KV SURGE IMMUNITYSWITCH DIMMINGIP 6524019.5426 x 235 x 285SR4HERGT01TG2G/TRAY CONTROL GEAR RAPTOR 3WIRE 240V 10KV SURGE IMMUNITYSWITCH DIMMINGIP 2024016.5400 x 160 x 167SR4HFRWP01TW/P BOX CONTROL GEAR RAPTOR 3WIRE 415V 10KV SURGE IMMUNITYSWITCH DIMMINGIP 6541519.5426 x 235 x 285SR4HFRGT01TG2G/TRAY CONTROL GEAR RAPTOR 3WIRE 415V 10KV SURGE IMMUNITYSWITCH DIMMINGIP 2041516.5400 x 160 x 167ACCESSORIESProduct CodeNameVoltage (V)SDIM-400-A1Switch Dim Interface 380-430V415SDIM-230-A1Switch Dim Interface 220-250V240PSU-003-A1220-430VAC/12 DC Dim Signal PSU240/415IP20 Control Gear DimensionsIP65 Control Gear P01TCopyright Schréder SA - Oct 2021. All rights reserved. Specifications are of an indicative nature and subject to change without notice.RAPTOR 3 8
RAPTOR 3 Shaping the future of sports floodlighting The ultimate Aussie-engineered sports floodlight is a high-performing floodlight with leading optical control and innovative design. RAPTOR 3 will provide better spill control and less windage for sports venues as well
