Transcription
Product Specification and Schedule SheetE650 S4eEnhanced metering for Commercialand Industrial ApplicationsBuilt on the time-tested platform, the S4e extends the “builda meter concept” into the realm of open-architecture protocol,fully supporting the ANSI C12.18, C12.19 and C12.21communication protocol standards.A changing meter for a changing market:The S4e maintains its flexibility with a FLASH technologyprogrammable microprocessor. Field re-probrammability viathe ANSI standard type II optical port preserves your investmentwith the evolving requirements of the ANSI protocol, and changingdemands of the market. The S4e incorporates 128k of on-boardmemory storage for load profile, self-reads and event logsproviding an easy upgrade path without the need for an additionaloption board. Load profile can be configured for up to 15 channelsof information from a choice of 24 different storage metrics.The build-a-meter concept provides modular growth in theS4e with software upgrades for time of use, reactive energymetering, transformer lkoss compensation, load profile as wellas the flexibility of adding any combination of communicationand relay option boards.The S4e is an ‘AMI friendly’ meter with the largest space underthe cover for AMI integration. A wide range of modular andintegrated communication options are currently available, eitherfactory installed or for retrofit. Technologies include power linecarrier, mesh network, digital cellular, RS-232, RS-485 and theadvanced modem.www.landisgyr.comLoad Profile 128K on-board option available Up to 15 channels from choice of24 metrics available in S4e meterKey Benefits KYZ with Programmable PulseOutput Value EOI Demand Threshold Alert Voltage Threshold Alert Diagnostics Load Control Up to two inputs from external devices Pulses input to load profile Activate real-time rate Optional transformer loss compensation AMI friendly765.742.1001
Product Specification and Schedule SheetSpecificationsGeneral SpecificationsOperating TemperatureOperating VoltageFrequencyHumidityAccuracy ClassApplicable StandardsVoltage BurdenLandis Gyr CommunicationThird Party CommunicationActive Energy “kWh-kW” and optional Reactive kVAh-kVA kVARh-kVARDigital Multiplication Measurement TechniqueNon-Volatile MemoryDesigned for 20 years lifeMeets ANSI standards for performanceUtilizes ANSI protocol (between meter and AMI device)9 digit LCDDisplay scroll sequence programmable (factory or end user)-40C to 85C under cover60% to 115% of Vn50 or 60Hz /- 5%5% to 95% relative humidity, non condensingClass 20, 120, 200 & 320 Meters /- 0.2%Class 480 Meters and Forms 36S, 29S, 36A /- 0.5%Over Voltage WithstandTemporary (.5 sec) 150% rated voltageContinuous (5 hours) 120% rated voltageANSI C12.1 for electric metersANSI C12.10 for physical aspects of watt hour metersANSI C12.20 for electricity meters, 0.2 and 0.5 accuracy classesCAN3-C17-M84 Canadian specifications for approval of type of electricity metersCAN3-Z234.4-79 Canadian Specs for all numeric dates and times 2.5W2 Way Gridstream RF2 Way Gridstream PLC1 Way PLC1 Way Fixed Network RFAclara STAR Network — RFAclara TWACS Technology — PLCMetrum CDMA/1xRTT and GSM/GPRS under glassCooper Power Systems 2 Way PLCSilver Spring Network 2 Way RF MeshWide Dynamic Voltage Range (120-480)Service Scan Automatic service recognitionGyrBox Site Diagnostics6 Self-reads available with load profile memory installedAvailable up to 15 Channel Data Recording UnderglassFive TOU RatesAvailable Internal ModemUp to four output relaysUp to two external inputsFirmware UpgradeableTrue Three-phase Calibration4 or 5 digit x1 or x10 displayOptional 128k MemoryVAR, VA rms and VA vectorial measurementsCalculates neutral currentDirect Power Factor CalculationAXS4e & AXRS4eRXS4e & RXRS4eAXL
Product Specification and Schedule SheetThe S4e meter is available in the following forms:Form45S (5S)Nominal Voltage120V – 480V45A (5A)120V – 480V36S (6S)36A (6A)Current ClassCL 20Test Amps2.5Starting Load0.005 Amp (0.6W)Kh1.2CL 202.50.005 Amp (0.6W)1.2120V – 480VCL 202.50.005 Amp (0.6W)1.8120V – 480VCL 202.50.005 Amp (0.6W)1.829S120V – 480VCL 202.50.005 Amp (0.6W)1.89S/8S120V – 480VCL 202.50.005 Amp (0.6W)1.810A/8A120V – 480VCL 202.50.005 Amp (0.6W)1.812S120V – 480VCL 200300.050 Amp (6.0W)14.412SE120V – 480VCL 320500.080 Amp (9.6W)14.412K120V – 480VCL 480500.120 Amp (14.4W)28.827K120V – 480VCL 480500.120 Amp (14.4W)28.816/15/14S120V – 480VCL 200300.050 Amp (6.0W)21.616/15/14A120V – 480VCL 120300.050 Amp (6.0W)21.615/15/14SE120V – 480VCL 320500.080 Amp (9.6W)21.616/15/14K120V – 480VCL 480500.120 Amp (14.4W)43.22S120V – 480VCL 200300.050 Amp (6.0W7.22SE120V – 480VCL 320500.080 Amp (9.6W)7.23S120V – 480VCL 202.50.005 Amp (0.6W)0.31S120V – 480VCL 200150.050 Amp (6.0W1.84S120V – 480VCL 202.50.005 Amp (0.6W)0.625S120V – 480VCL 200300.050 Amp (6.0W14.4S4e S-Base:NetSingle PackSingle PackFour PackFour nsWeightDimensions2S56 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"3S)56 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"5S/45S46 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"6S/36S56 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"8S/9S56 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"12S(E)46 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"16S(E)56 lbs.9" x 11" x 9"19 lbs.15 1/2" x 10" x 15 1/2"370 lbs.31" x 46" x 45"31" x 46" x 43"FormS4e K-Base:12K710 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*16K812 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*31" x 46" x 43"27K912 lbs.10 3/4" x 15" x 12"N/AN/A250lbs.*31" x 46" x 43"S4e A-Base:5A79 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*31" x 46" x 43"6A79 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*31" x 46" x 43"8A/10A79 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*31" x 46" x 43"16A79 lbs.10 3/4" x 15" x 12"N/AN/A250 lbs.*31" x 46" x 43"Standard pallet size of 96 meters* Denotes alternate pallet size of 30 meters
E650 S4eProduct Specification and Schedule SheetS4e S-BaseCover OptionsOptical Port OnlyS4e K-BaseOptical Port/No ResetOptical Port/Reset (Default)S4e A-BaseOptical Port/Keylock Reset (90º)
E650 S4e Upgrade KitsFirmware Upgrade KitsMeter firmware upgrades are controlled by a HardlockKey. The Hardlock Key is attached to a USB port of thecomputer. Meter upgrades are placed into the HardlockKey by contacting the factory and referencing thepurchase order for the meter upgrades. A code will begiven via phone or fax that will enable the number ofupgrades purchased. Firmware upgrades are handledusing ProPak software and the USB Hardlock Key.Load Profile Memory UpgradesThe S4e Ram or Load Profile Memory can be activatedusing ProPak software and a USB Hardlock key. TheRAM consists of 128K of memory. Once the memory isactivated with ProPak, a program with Load Profilefunction can be loaded into the meter using1132PROG/COM Software. This gives the S4e a distinctadvantage for monitoring power quality and billing data.Internal Modem Upgrade KitsThe S4e internal modem kit consists of a modemcard that is installed below the S4e main board in theS4e’s communication slot. The kit contains the modemcard, communication cable and instructions forinstallation. Once installed in the S4e meter, the modemis programmed by the 1132Prog/1132Com software.The modem may be used for remote access of the S4emeter’s billing data, load profile and for displaying themeter’s instantaneous data for real-time monitoring withthe DATAGYR EIS Energy Information System software.The modem communicates at 300, 1200, 2400 or 9600baud and can be programmed with flexible answer hours.The S4e with a modem can also be programmed toinitiate calls to report power recovery, error conditionsand more.RS-232 Interface Upgrade KitThe S4e internal RS-232 Interface Kit consists of anRS-232 card installed below the S4e board in the S4e’scommuinication slot. The kit contains the RS-232 card,communication cable and instructions for installation.Once installed in the S4e meter, the RS-232 Interface canbe used for direct RS-232 connection to the meter froma computer or external cell phone. The RS-232 interfacemay be used to extend communication with theReader/Programmer outside of the meter’s enclosurein situations where direct access to the meter’s opticalport is restricted. The Landis Gyr 1132Prog/ 1132ComReader/Programmer and DATAGYR EIS software bothsupport RS-232 connections without the need foradditional equipment installed in the computer. Thesesoftware packages can read the S4e meter’s billingand load profile data and can display the meter’sinstantaneous data for real-time monitoring. Theinterface communicates at 1200 or 9600 baud.Option Upgrade KitesAn optional input/output kit provides up to four, formC, solid-state relays and up to two external inputs forrecording pulses from a remote source. The kit consistsof the option board, retainers, connection cable andinstallation instruction. Once external input can also beused for real-time rate changes or self-read actuation.The board can be easily added in the field without theneed for special tools or soldering. The S4e KYZoutputs are from “C”, opto FET, general purpose, outputrelays and the external inputs are general purposenon-wetted inputs.Option CapabilitiesOne Relay/No Input – Part #69520-1 Programmable for KYZ, End of Interval (EOI), LoadControl (LC), Demand Threshold Alert, GyrBox AlertOutput, Power Factor Threshold Alert and VoltageThreshold Alert No input optionTwo Relay/One Input – Part #69520-2 Each relay programmable for KYZ, End of Interval(EOI), Load Control (LC), Voltage Threshold Alert,GyrBox Alert Out and Power Factor Threshold Alerts Input programmable for Real Time, Load ProfileChannel Input or Self-Read ActivationFour Relay/Two Input – Part #69520-3 Each relay programmable for KYZ, End of Interval(EOI), Load Control (LC), Demand Threshold Alert,Voltage Threshold Alert, GyrBox Alert Output andPower Factor Threshold Alerts Input 1 programmable for Real Time, Load ProfileChannel input or Self-Read Activation Input 2 programmable for Lead Profile Channel input
E650 S4eProduct Specification and Schedule SheetWith focus on customer satisfaction, we are committed toproviding the best metering solution in terms of capability,technology and affordability. By utilizing our experience andtechnology with that of our strategic allies and developmentpartners, we provide metering solutions that cover the rangeof utilities’ commercial and industrial metering needs.2800 Duncan RoadLafayette, IN 47904 U.S.APhone: 765.742.1001Tech Support: 800.777.2774FAX: 765.429.0936www.landisgyr.com 2010 Landis Gyr 12/21/10
fully supporting the ANSI C12.18, C12.19 and C12.21 communication protocol standards. A changing meter for a changing market: The S4e maintains its flexibility with a FLASH technology programmable microprocessor. Field re-probrammability via the ANSI standard type II optical port preserves your investment with the evolving requirements of the ANSI protocol, and changing
