Transcription
ConsumablesPAL GC/GC-MS Sample InjectorPAL LC/LC-MS Sample Injector
Identify the appropriate La-Pha-Pack product for your PAL autosampler.PrefaceThe brochure is devided in four fields of applications:HPLCWith instrument(s):GCWith instrument(s):HSWith instrument(s):HTSWith instrument(s):Consumables listed in the individual chapters havebeen approved by CTC Analytics to be suitable forusage on the indicated type of the PAL autosampler.However, cost-free samples can be requested anytime for testing.The brochure includes only the most commonproducts for PAL autosampler. You will findfurther seals and vials in our general catalogue,which you can request by visiting our website atwww.la-pha-pack.com.All products of this brochure are standard productsand thus normally deliverable ex stock. Our companypolicy prohibits supply to end-users. However, wewill be glad to help any user in possession of aninstrument of CTC Analytics with technical adviceand samples. Upon request we can provide you withaddresses of dealers that distribute our products.The brochure contains general consumables, likeVial Racks, Crimping Tools or Syringe Filters, that arerequired in connection with the analysis of samples,however, are independent from the instrument.Detailed information on these products can also betaken from our general catalogue.La-Pha-Pack GmbH, Am Parir 20, D-52379 LangerweheTelephone 49 (0) 24 23 / 94 31-0, Fax 49 (0) 24 23 / 94 31-33Internet: www.la-pha-pack.com, E-Mail: service@la-pha-pack.com2
1. Short Thread ND9 (wide opening)Fill vol. 0.35ml/Usable vol. 0.3ml11 09 051911 09 052011 19 120511 19 151606 09 035706 09 066906 09 086506 09 08661.5mlShort Thread Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening1.5mlShort Thread Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening,label filling lines1.5mlShort Thread Vial,32 x 11.6mm,amber glass,1st hydrol. class,wide opening,label filling lines1.5mlPP Short Thread Vial,32 x 11.6mm,transparent/amberwith filling lines,slightly concaveshaped bottom0.1mlMicro-Insert,31 x 6mm,clear glass,15mm top0.1mlMicro-Insert,31 x 6mm,clear glass,12mm top0.1mlMicro-Insert,29 x 5.7mm,clear glass,with assembledplastic spring0.2mlMicro-Insert,31 x 6mm,clear glass,flat bottomSILANIZED:11 09 1241100 pcs.per PP-BoxSILANIZED:11 09 1242100 pcs.per PP-Box100 pcs.per PP-BoxSILANIZED:06 09 1240100 pcs.per PE-Bag10 x 100 pcs.per PP-BoxTPX11 09 099911 09 1957Short Thread Vialwith integrated0.2ml Micro-Insert,32 x 11.6mmclear glass,1st hydrol. class,with label fillinglinesShort Thread Vialwith integrated0.2ml Micro-Insert,32 x 11.6mm,amber glass,1st hydrol. class,with label fillinglines100 pcs.per PP-Box100 pcs.per PP-Box11 09 062011 09 22751.1ml Microliter0.9ml Total MicroliterShort Thread Vial ND9, Short Thread Vial ND9,32 x 11.6mm,32 x 11.6mm,clear glass,clear glass,1st hydrolytic class,1st hydrol. classresidual volume 1µSILANIZED:11 09 2178100 pcs.per PP-Box100 pcs.per PP-Box11 14 1189HPLCFill vol. 0.2ml/Usable vol. 0.1ml11 09 0500Fill vol. 0.25ml/Usable vol. 0.2mlFill vol. 0.3ml/Usable vol. 0.25mlPPSILANIZED:06 09 134310 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-BoxTPXPPPP11 14 165511 19 170611 19 09320.7mlPP Short ThreadMicro-Vial,transparent,32 x 11.6mm0.3mlPP Short ThreadMicro-Vial,transparent,32 x 11.6mmTPX Short Thread Vial,32 x 11.6mm,clear, with integrated0.2ml Glass Micro-InsertTPX Short Thread Vial,32 x 11.6mm,amber, with integrated0.2ml Glass Micro-InsertSILANIZED:11 14 1265SILANIZED:11 14 1694100 pcs.per PP-Box100 pcs.per PP-BoxTPX:11 19 1021100 pcs.per PE-Bag100 pcs.per PE-Bag3
HPLC1. Short Thread ND9 (cont.)SealCapwith assembled Septa09 15 047809 15 086709 15 117609 15 201109 15 181909 15 201209 15 048109 15 083809 15 117809 15 048009 15 086809 15 117709 15 085209 15 086909 15 117909 15 202109 15 20169mm PP Short Thread Screw Cap, transparent, centre hole9mm PP Short Thread Screw Cap, blue, centre hole9mm PP Short Thread Screw Cap, red, centre hole9mm PP Short Thread Screw Cap, transparent,centre hole9mm PP Short Thread Screw Cap, blue,centre hole9mm PP Short Thread Screw Cap, red,centre hole9mm PP Short Thread Screw Cap, transparent, centre hole9mm PP Short Thread Screw Cap, blue, centre hole9mm PP Short Thread Screw Cap, red, centre hole9mm PP Short Thread Screw Cap, transparent, centre hole9mm PP Short Thread Screw Cap, blue, centre hole9mm PP Short Thread Screw Cap, red, centre hole9mm PP Short Thread Screw Cap, transparent, centre hole9mm PP Short Thread Screw Cap, blue, centre hole9mm PP Short Thread Screw Cap, red, centre hole9mm PP Short Thread Screw Cap, transparent,centre hole9mm PP Short Thread Screw Cap, blue,centre holeNatural Rubber red-orange/TEF transparent,60 shore A, 1.0mmRedRubber/PTFE beige,45 shore A, 1.0mmSilicone white/PTFE red,55 shore A, 1.0mmPTFE red/Silicone white/PTFE red,45 shore A, 1.0mmSilicone white/PTFE blue,55 shore A, 1.0mm, with slitSilicone white / PTFE red, pre-cut (Y)55 shore A, 1.0mmPackaging Unit: 100 pcs. per PE-BagUpon request also available with black, yellow or green Short Thread Cap; also available in blue closed top versionMagnetic Short Thread CapArt. No.Description Cap09 15 1907 PP Short Thread Cap, blue, 6mm centre hole,with firmly affixed magnetic cap, goldSepta MaterialDurometerSilicone white/PTFE red55 shore A 1.0mmThickn.Packaging Unit: 100 pcs. per PE-BagLC/MS Short Thread Cap (One component closure – no bleeding)Art. No.Description Cap09 08 2000MS-Cap, 9mm Short Thread Cap, transparent with thinned penetration area diaphragm One component closure – absolute no bleeding Inert Can be penetrated as a septa LC/GC MS certified Tight closurePackaging Unit: 100 pcs. per PE-BagUltraBondTM Seals ND9 (Cap Liner form an unseparatable unit, sothat the liner cannot be pushed into the vial even with a blunt needle)Art. No.Description CapSepta MaterialDurometerThickn.09 04 1220 PP Short Thread Cap black, 6mm centre holeSilicone white/PTFE red45 shore A1.3mm09 04 1533 PP Short Thread Cap blue, 6mm centre holeSilicone beige/PTFE white45 shore A1.3mm09 04 1534 PP Short Thread Cap blue, 6mm centre holeSilicone beige/PTFE white, with slit 45 shore A1.3mmPackaging Unit: 100 pcs. per PE-Bag4
2. Snap Ring ND11 (wide opening)11 09 064411 09 06451.5ml Snap Ring Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening,label filling lines100 pcs. per PP-Box1.5ml Snap Ring Vial,32 x 11.6mm,amber glass,1st hydrol. class,wide opening,label filling lines100 pcs. per PP-BoxTPX100 pcs. per PP-Box11 14 1656TPX Snap Ring Vial,32 x 11.6mm, clear,with integrated0.2ml Glass Micro-InsertSILANIZED: 11 14 1266TPX Snap Ring Vial,32 x 11.6mm, amber,with integrated0.2ml Glass Micro-InsertSILANIZED: 11 14 1695100 pcs. per PP-Box06 09 066906 09 08650.1ml Micro-Insert,31 x 6mm,clear glass,12mm topSILANIZED: 06 09 124010 x 100 pcs. per PP-BoxTPX11 14 1190100 pcs. per PP-Box06 09 03570.1ml Micro-Insert,31 x 6mm,clear glass,15mm top10 x 100 pcs. per PP-BoxPPPP0.1ml Micro-Insert,29 x 5.7mm,clear glass,with assembledplastic springSILANIZED: 06 09 134310 x 100 pcs. per PP-BoxFill vol. 0.35ml/Usable vol. 0.3ml06 09 08660.2ml Micro-Insert,31 x 6mm,clear glass,flat bottom10 x 100 pcs. per PP-BoxPPTPX11 19 093311 19 121711 19 170711 19 1022100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag0.3mlPP Snap RingMicro-Vial,transparent,32 x 11.6mmSealCap11 15 063511 15 126711 15 132311 15 210611 15 210711 15 063711 15 115111 15 132511 15 063611 15 126811 15 132411 15 065011 15 126911 15 132611 15 204511 15 204711 08 167611mm PE Snap Ring Cap transparent, centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Snap Ring Cap red, centre hole11mm PE Snap Ring Cap transparent,centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Snap Ring Cap transparent, centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Snap Ring Cap red, centre hole11mm PE Snap Ring Cap transparent, centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Snap Ring Cap red, centre hole11mm PE Snap Ring Cap transparent, centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Snap Ring Cap red, centre hole11mm PE Snap Ring Cap transparent,centre hole11mm PE Snap Ring Cap blue, centre hole11mm PE Push On Cap, blue0.3mlPP Snap RingMicro-Vial,amber,32 x 11.6mm0.7mlPP Snap RingMicro-Vial,transparent,32 x 11.6mm,cylindrical InsertHPLC11 09 06271.5ml Snap Ring Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide openingFill vol. 0.2ml/Usable vol. 0.1mlFill vol. 0.25ml/Usable vol. 0.2mlFill vol. 0.3ml/Usable vol. 0.25mlWe can also supply barcode labelled or pre-sealed Vials!0.3mlTPX Snap RingMicro-Vial,crystal clear,32 x 11.6mmwith assembled SeptaNatural Rubber red-orange/TEF transparent,60 shore A, 1.0mmRedRubber/PTFE beige,45 shore A, 1.0mmSilicone white/PTFE red,45 shore A, 1.3mmPTFE red/Silicone white/PTFE red,45 shore A, 1.0mmSilicone white/PTFE blue,55 shore A, 1.0mm,cross-slittedSilicone white/PTFE red, pre-cut (Y),45 shore A, 1.3mmwith thinned penetration pointPackaging Unit: 100 pcs. per PE-BagUpon request also available with yellow or green Snap Ring Cap! Transparent and blue Snap Ring Caps alsoavailable in a soft PE quality! Snap Ring Vials can alternatively be crimped with Standard Aluminium Crimp Seals!5
HPLCFill vol. 0.15ml/Usable vol. 0.1mlFill vol. 0.3ml/Usable vol. 0.25mlFill vol. 0.2ml/Usable vol. 0.15mlFill vol. 0.15ml/Usable vol. 0.1ml3. Screw Neck ND8 (small opening)11 09 021011 09 025911 09 041911 09 038211 09 041705 09 012905 09 026905 09 167405 09 09681.5mlScrew Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,small opening1.5mlScrew Neck Vial,32 x 11.6mm,amber glass,1st hydrol. class,small opening1.5mlScrew Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,small opening,label filling lines1.5mlScrew Neck Vial,32 x 11.6mm,amber glass,1st hydrol. class,small opening,label filling lines1.1mlMicro-Vial,32 x 11.6mm,clear glass,1st hydrol. class,conical0.1mlMicro-Insert,31 x 5mm,clear glass,15mm top0.1mlMicro-Insert,31 x 5mm,clear glass,9mm top0.2mlMicro-Insert,31 x 5mm,clear glass,1st hydrol. class,flat bottom0.1mlMicro-Insert,29 x 5mm,clear glass,with assembledplastic spring100 pcs.per PP-Box100 pcs.per PP-Box100 pcs.per PP-Box100 pcs.per PP-Box100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-BoxWe can also supply barcode labelled or pre-sealed Vials!SealCap08 15 04608mm Polypropylene Screw Cap, black, centre hole08 15 19658mm Polypropylene Screw Cap, black, centre hole08 15 02938mm Polypropylene Screw Cap, black, centre hole08 15 14498mm Polypropylene Screw Cap, black, centre hole08 15 02948mm Polypropylene Screw Cap, black, centre holewith assembled SeptaReplacement SeptaNatural Rubber red-orange/TEF transparent,60 shore A, 1.3mmRedRubber/PTFE beige,45 shore A, 1.0mm08 02 0355Silicone white/PTFE red,45 shore A, 1.3mmSilicone white/PTFE red, with slit,45 shore A, 1.3mmPTFE red/Silicone white/PTFE red,45 shore A, 1.0mm08 02 0103Packaging Unit: 100 pcs. per PE-Bag08 02 196608 02 00051000 pcs. per PE-BagCaps/Septa unassembledPackaging Unit08 08 00278mm Polypropylene Screw Cap, black, centre hole100 pcs. per PE-Bag08 02 017708 02 00398mm Septa, PTFE virginal, 53 shore D, 0.25mm (only unassembled)8mm Septa, Silicone white/PTFE blue, 55 shore A, 0.9mm, with slit (only unassembled)1000 pcs. per PE-Bag1000 pcs. per PE-BagUpon request further Screw Seals with different septa and the following caps are available:- black, closed top- white, centre hole- white, closed top6
Fill vol. 0.3ml/Usable vol. 0.25mlFill vol. 0.2ml/Usable vol. 0.1mlFill vol. 0.35ml/Usable vol. 0.3ml10 09 074310 09 119610 09 119706 09 035706 09 066906 09 086506 09 08661.5mlScrew Neck Vial,10-425 Thread,32 x 11.6mm,clear glass,1st hydrol. class,wide opening1.5mlScrew Neck Vial,10-425 Thread,32 x 11.6mm,clear glass,1st hydrol. class,wide opening,label filling lines1.5mlScrew Neck Vial,10-425 Thread,32 x 11.6mm,amber glass,1st hydrol. class,wide opening,label filling lines0.1mlMicro-Insert,31 x 6mm,clear glass,15mm top0.1mlMicro-Insert,31 x 6mm,clear glass,12mm top0.2mlMicro-Insert,31 x 6mm,clear glass,flat bottomSILANIZED:06 09 12400.1mlMicro-Insert,29 x 5.7mm,clear glass,with assembledplastic springSILANIZED:06 09 1343100 pcs.per PP-Box100 pcs.per PP-Box100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-BoxHPLCFill vol. 0.25ml/Usable vol. 0.2ml4. Screw Neck ND10 (wide opening)We can also supply barcode labelled or pre-sealed Vials!SealCapwith assembled Septa10 15 125610mm Polypropylene Screw Cap, black, centre holeNatural Rubber red-orange/TEF transparent,60 shore A, 1.3mm09 02 125910 15 125710mm Polypropylene Screw Cap, black, centre hole09 02 126010 15 074410mm Polypropylene Screw Cap, black, centre hole10 15 125810mm Polypropylene Screw Cap, black, centre hole10 15 132810mm Polypropylene Screw Cap, black, centre holeSilicone white/PTFE red,45 shore A, 1.3mmSilicone white/PTFE beige,45 shore A, 1.5mmPTFE red/Silicone white/PTFE red,45 shore A, 1.0mmSilicone white/PTFE blue, with slit,55 shore A, 1.5mmPackaging Unit: 100 pcs. per PE-BagReplacement Septa09 02 072309 02 126109 02 13271000 pcs. per PE-BagUpon request further Seals are available as closed top version!Caps/Septa unassembledPackaging Unit10 08 074210mm Polypropylene Screw Cap, black, centre hole100 pcs. per PE-Bag10 08 189910mm Polypropylene Screw Cap, black, closed top100 pcs. per PE-Bag10 02 064610mm Septa, PTFE virginal, 53 shore D, 0.25mm (only unassembled)1000 pcs. per PE-Bag09 02 0723Silicone white/PTFE beige, 45 shore A, 1.5mm1000 pcs. per PE-Bag7
5. Crimp Neck ND11 (wide opening)11 09 22761.5ml Crimp Neck Vial,32 x 11.6mm,clear glass, 1st hydrol. class,wide opening1.5ml Crimp Neck Vial,32 x 11.6mm,clear glass, 1st hydrol. class,wide opening,label filling lines1.5ml Crimp Neck Vial,32 x 11.6mm,amber glass, 1st hydrol. class,wide opening,label filling lines1.1ml MicroliterCrimp Neck Vial ND11,32 x 11.6mm,clear glass, 1st hydrol. classSILANIZED: 11 09 21770,9ml Total MicroliterSnap Ring Vial ND11,32 x 11.6mm,clear glass, 1st hydrolytic class,residual volume 1µL100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-BoxFill vol. 0.25ml/Usable vol. 0.2ml11 09 092111 09 1956Crimp Neck Vial with integrated Crimp Neck Vial with integrated0.2ml Micro-Insert,0.2ml Micro-Insert,32 x 11.6mm,32 x 11.6mm,stclear glass, 1 hydrol. class,amber glass, 1st hydrol. class,with label filling lineswith label filling lines100 pcs. per PP-Box100 pcs. per PP-Box06 09 035706 09 066906 09 086506 09 08660.1ml Micro-Insert,31 x 6mm,clear glass,15mm topSILANIZED: 06 09 12400.1ml Micro-Insert,31 x 6mm,clear glass,12mm top0.1ml Micro-Insert,29 x 5.7mm,clear glass,with assembled plastic springSILANIZED: 06 09 13430.2ml Micro-Insert,31 x 6mm,clear glass,flat bottom10 x 100 pcs. per PP-Box10 x 100 pcs. per PP-Box10 x 100 pcs. per PP-Box10 x 100 pcs. per PP-BoxSealCapwith assembled Septa11 03 020911 03 187511 03 024711 03 019611 03 046411 08 167611mm Alum. Crimp Cap, clear lacq., centre hole11mm Alum. Crimp Cap, clear lacq., centre hole11mm Alum. Crimp Cap, clear lacq., centre holeReplacementSeptaNatural Rubber red-orange/TEF transparent, 60 shore A, 1.0mm 11 02 0534RedRubber/PTFE beige, 45 shore A, 1.0mmSilicone white/PTFE red, 45 shore A, 1.3mm11 02 187611 02 010111mm Alum. Crimp Cap, clear lacq., centre holePTFE red/Silicone white/PTFE red, 45 shore A, 1.0mm11 02 011511mm Alum. Crimp Cap, clear lacq., centre holeSilicone white/PTFE blue, cross-slitted, 55 shore A, 1.5mm11 02 044611mm PE Push-On Cap, bluewith thinned penetration pointPackaging Unit: 100 pcs. per PE-Bag8Fill vol. 0.35ml/Usable vol. 0.3ml11 09 0619Fill vol. 0.2ml/Usable vol. 0.1ml11 09 0477Fill vol. 0.3ml/Usable vol. 0.25ml11 09 0476HPLC11 09 035611 06 000611 07 000212 21 100111mm Crimper11mm DecapperVial Rack, Acrylic,173 x 95 x 20mm,50 cavities with adiameter of 12mm1 pc. per PP-Box1 pc. per PP-Box1 pc.1000 pcs. per PE-Bag
08 09 030508 09 025808 09 060608 09 027608 09 040508 09 04060.7mlMicro-Vial,40 x 7mm,clear glass,1st hydrol. class,conical0.7mlMicro-Vial,40 x 7 mm,amber glass,1st hydrol. class,conical0.3mlMicro-Vial,31.5 x 5.5mm,clear glass,1st hydrol. class,conical0.3mlMicro-Vial,31.5 x 5.5mm,clear glass,1st hydrol. class,round bottom0.7mlCrimp Neck Vial,40 x 7mm,clear glass,1st hydrol. class,flat bottom0.7mlCrimp Neck Vial,40 x 7mm,amber glass,1st hydrol. class,flat bottom10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-BoxSealCap08 03 20428mm Aluminium Crimp Cap, clear lacquered, centre hole08 03 02498mm Aluminium Crimp Cap, clear lacquered, centre hole08 03 01138mm Aluminium Crimp Cap, clear lacquered, centre holeGC6. Crimp Neck ND8with assembled SeptaRedRubber/PTFE beige, 45 shore A, 1.0mmSilicone white/PTFE red, 45 shore A, 1.3mmPTFE red/Silicone white/PTFE red, 45 shore A, 1.0mmPackaging Unit: 100 pcs. per PE-Bag08 06 000508 07 000108 21 100002 17 047202 17 04738mm Crimper8mm DecapperVial Rack, Acrylic,173 x 95 x 20mm,50 cavities with adiameter of 8.5/3mmUniversal Capillary Connectorfor 2 columns,for all columns with an ID of 0.20-0.53mmand an OD of 0.30-0.75mmUniversal Y Capillary Connectorfor 3 columns,for all columns with an ID of 0.20-0.53mmand an OD of 0.30-0.75mm1 pc.per PP-Box1 pc.per PP-Box1 pc.10 pcs.per PP-Box1 pc.per PP-Box9
11 09 035611 09 047611 09 047711 09 061911 09 227611 09 041511 09 09211.5mlCrimp Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening1.5mlCrimp Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening,label filling lines1.5mlCrimp Neck Vial,32 x 11.6mm,amber glass,1st hydrol. class,wide opening,label filling lines1.1ml MicroliterCrimp Neck Vial ND11,32 x 11.6mm,clear glass,1st hydrol. classSILANIZED:11 09 21770,9ml Total Microliter SnapRing Vial ND11,32 x 11.6mm,clear glass,1st hydrol. class,residual volume 1µ1.1mlMicro-Vial,32 x 11.6mm,clear glass,1st hydrol. class,conicalCrimp Neck Vialwith integrated0.2ml Micro-Insert,32 x 11.6mm,clear glass,1st hydrol. class,with label filling lines100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box11 14 1190Crimp Neck Vialwith integrated0.2ml Micro-Insert,32 x 11.6mm,amber glass,1st hydrol. class,with label filling lines11 14 165606 09 035706 09 066906 09 086506 09 08660.1mlMicro-Insert,31 x 6mm,clear glass,15mm top0.1mlMicro-Insert,31 x 6mm,clear glass,12mm top0.1mlMicro-Insert,29 x 5.7mm,clear glass,with assembledplastic spring0.2mlMicro-Insert,31 x 6mm,clear glass,flat bottomTPX Snap Ring Vial,32 x 11.6mm,clear, with integrated0.2ml Glass Micro-InsertSILANIZED:11 14 1266TPX Snap Ring Vial,32 x 11.6mm,amber, with integrated0.2ml Glass Micro-InsertSILANIZED:11 14 1695SILANIZED:06 09 1240100 pcs. per PP-Box100 pcs. per PP-Box10 x 100 pcs. per PP-Box100 pcs. per PP-BoxFill vol. 0.35ml/Usable vol. 0.3mlFill vol. 0.2ml/Usable vol. 0.1ml11 09 1956TPXFill vol. 0.3ml/Usable vol. 0.25mlTPXFill vol. 0.25ml/Usable vol. 0.2mlGC7. Crimp Neck ND11 (wide opening)SILANIZED:06 09 134310 x 100 pcs. per PP-Box10 x 100 pcs. per PP-Box10 x 100 pcs. per PP-BoxSealCapwith assembled Septa11 03 149411mm Magnetic Crimp Cap, gold, centre holeNatural Rubber red-orange/TEF transparent, 60 shore A, 1.3mm11 03 198811mm Magnetic Crimp Cap, gold, centre holeRedRubber/PTFE beige, 45 shore A, 1.0mm11 03 031811mm Magnetic Crimp Cap, gold, centre hole11 03 033211mm Magnetic Crimp Cap, gold, centre holeSilicone white/PTFE red, 45 shore A, 1.3mmPTFE red/Silicone white/PTFE red, 45 shore A, 1.0mmPackaging Unit: 100 pcs. per PE-Bag10
8. Screw Neck ND18HSUniversal (Headspace SPME)18 09 130718 09 131118 09 130618 09 131020mlScrew Neck Vial ND18,75.5 x 22.5mm,clear/amber glass,1st hydrol. class,with Precision Thread,rounded bottom10mlScrew Neck Vial ND18,46 x 22.5mm,clear/amber glass,1st hydrol. class,with Precision Thread,rounded bottom18 03 130918 03 141418 03 1578-Seal:-Seal:-Seal:18mm Magn.18mm Magn.18mm Magn.Screw Cap, silver,Screw Cap, silver,Screw Cap, silver,8mm centre hole;8mm centre hole;8mm centre hole;Silicone blue transp./ Silicone white/PTFE blue, Silicone white/PTFE red,PTFE white,45 shore A,55 shore A,45 shore A,1.3mm1.5mm1.3mm18 03 187418mm Magn.Universal-Screw Cap,open Top;Silicone white/Aluminium Foil silver,50 shore A,1.3mm18 03 206318 03 1416-Seal:18mm Magn.Universal Screw Cap,silver, centre hole;Silicone white/PTFE red,18mm Magn.Screw Cap, silver,8mm centre hole;Butyl red/PTFE grey,55 shore A,1.5mm,pre-cut star (*)55 shore A,1.6mm100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag18 03 166618 03 166717 02 141717 02 131817 02 158017 02 187317 02 206217 02 141518mm Magn.Screw Cap, silver,closed top,Silicone white/PTFE red,45 shore A,1.3mm18mm Magn.Screw Cap, silver,closed top,Butyl red/PTFE grey,55 shore A,1.6mmSepta,Septa,Septa,Silicone blue transp./ Silicone white/PTFE blue, Silicone white/PTFE red,PTFE white,45 shore A,55 shore A,45 shore A,1.3mm1.5mm1.3mmSepta,Silicone white/Aluminium foil silver,50 shore A,1.3mmSepta,Silicone white/PTFE red,55 shore A,1.5mm,pre-cut star (*)Septa,Butyl red/PTFE grey,100 pcs. per PE-Bag100 pcs. per PE-Bag1.000 pcs. per PE-Bag1.000 pcs. per PE-Bag1.000 pcs. per PE-Bag1.000 pcs. per PE-Bag1.000 pcs. per PE-Bag.comparable results regarding tightness as with Crimp Neck Headspace Vials due to thethread that draws the septa tight against the vial.precisionreproduceable results, as untightnesses due to crimping faults by incorrectly adjusted orcrimpers are excluded.non-adjustablesamples can be taken and stored directly in the field in the analysis vial, so that a latertransfer in the lab is unnecessary.sample8mm centre hole of the cap offers enough space for the SPME-Phase for a safe penetration.1.3 / 1.5mm thick Silicone/PTFE septa offers good stability and excellent sealingat even high pressure in the vial1.000 pcs. per PE-Bag55 shore A,1.6mm.thin and easy to penetrate Silicone/PTFE septa in different qualities.alternatively 1.6mm thick, 55 shore A hard Butyl/PTFE septa as a less cost-intensivefor a lower temperature range and for uncritical analysis in the Headspace field.alternativeno more transportation problems in the autosampler with incorrectly crimped vials.more convenient and easier to open and to close.can be used for Headspace analysis as well as for SPME application.no additional costs for crimping tools.time and energy saving closure technique.20ml Vials can be supplied in combination with a seal of your choice as 2in1 KITs11
9. Crimp Neck ND20Special (SPME)HSStandard (Headspace)20 09 087320 09 169020 09 140520 09 169120 09 122220ml Headspace-Vial, 75.5 x 22.5mm, 20ml Headspace-Vial, 75.5 x 22.5mm, 10ml Headspace-Vial, 46 x 22.5mm, 10ml Headspace-Vial, 46 x 22.5mm,clear glass, 1st hydrol. class,amber glass, 1st hydrol. class,clear glass, 1st hydrol. class,amber glass, 1st hydrol. class,DIN-crimp neck, long neck,DIN-crimp neck, long neck,DIN-crimp neck, rounded bottomDIN-crimp neck, rounded bottomrounded bottomrounded bottom100 pcs. per PP-Box100 pcs. per PP-Box20 03 0665*100 pcs. per PP-Box100 pcs. per PP-Box20 03 0975-Seal:20mm Magn. Crimp Cap,special alloy,gold lacquered,5mm centre hole;Silic. blue transp./PTFE transp.,45 shore A, 3.0mm100 pcs. per PE-Bag20ml SPME Vial, 75.5 x 22.5mm,clear glass, 1st hydrol. class,rounded bottom, special crimp neck20 03 1536-Seal:20mm Magn. Crimp Cap,special alloy,gold lacquered,8mm centre hole;Silic. blue transp./PTFE transp.,45 shore A, 3.0mm-Seal:20mm Magn. Bimetal-Crimp Cap,100 pcs. per PE-Bag100 pcs. per PE-Bagred lacquered,8mm centre hole,Silic. blue transp./PTFE transp.,45 shore A, 3.0mm100 pcs. per PP-Box20 03 124620 03 1264Magn. Seal:-Seal:20mm Magn. Crimp Cap, 20mm Magn. Crimp Cap,special alloy,special alloy,gold lacquered,gold lacquered,8mm centre hole;8mm centre hole;Viton black,Silicone white/PTFE blue,70 shore A, 1.0mm55 shore A, 1.5mm100 pcs. per PE-Bag100 pcs. per PE-Bag20 02 205420 02 124420 02 1263UltraClean Closure:20mm Septa, Silicone transparent blue/PTFE transparent,45 shore A, 3.0mm20mm Septa,Silicone white/PTFE blue,55 shore A, 1.5mm20mm Septa,Viton 1A black,70 shore A, 1.0mmPackaging Unit: 1000 pcs. per PE-Bag* only suitable for the following autosamplers: Carlo Erba HS500/HS800, CTC 500, Fisons HS500/HS800, Varian/Chrompack 9020/251220 06 000820 07 000420 06 222920 06 223020mm Crimper20mm Decapper20mm Crimper,made of stainless steel,sterilizable for cleanroomapplications20mm Decapper,made of stainless steel,sterilizable for cleanroomapplications1 pc.per PP-Box1 pc.per PP-Box1 pc.per PP-Box1 pc.per PP-BoxAll stainless steel crimping tools also available in 8mm, 11mm and 13mm.
Washer BottleWasher Bottle20 09 182220 09 1405100ml Crimp Neck Vial,49 x 75mm,clear glass,1st hydrolytic class,DIN-Crimp Neck10ml Headspace-Vial,46 x 22.5mm,clear glass,1st. hydrol. class,DIN-Crimp Neck,rounded bottom4 pcs. in a cardboard box100 pcs. per PP-Box22 15 182422 15 186922 15 133422mm Combination Seal:PE Cap, transparent, centre hole, cap height 9.1mm;Silicone transparent blue/PTFE white,45 shore A, 1.3mm, Y-slitted22mm Combination Seal:PE Cap, transparent, 6mm centre hole, cap height 9.1mm;Silicone transparent blue/PTFE white,45 shore A, 1.3mm, Y-slitted22mm Combination Seal:PE Cap, transparent, centre hole, cap height 9.1mm;Silicone transparent blue/PTFE white,45 shore A, 1.3mmCTC Others9. Crimp Neck ND20 (cont.)100 pcs. per PE-Bag13
10. 96 Position Block SystemsHTSFilled BlockMicro-Insert SealMicro-InsertSealBlock1408 20 089708 20 091108 20 0943Deep Well Block „riplate”, PP, 96 Positions(RITTER), filled with0.35ml DW-Micro-Insert, 42.5 x 6mm, clear glass,17mm top, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mmSquare Well Block „riplate”, PP, 96 Positions(RITTER), filled with1ml SQW-Micro-Insert, 45.9 x 7.6mm, clear glass,round bottom, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mmMicrotiter-Plate, PP, 96 Positions(RITTER), filled with0.1ml MTP-Micro-Insert, 15.5 x 5.7mm, clear glass,flat bottom, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm08 05 0890 08 14 088908 05 0894 08 14 091008 05 0944 08 14 087608 14 088908 14 091008 14 08760.35ml DW-Micro-Insert, 42.5 x 6mm,clear glass, 17mm top, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm1ml SQW-Micro-Insert, 45.9 x 7.6mm,clear glass, round bottom, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm0.1ml MTP-Micro-Insert, 15.5 x 5.7mm,clear glass, flat bottom, with assembled9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm08 09 0888 09 15 076308 09 0909 09 15 076308 09 0875 09 15 076308 09 088808 09 090908 09 08750.35ml DW-Micro-Insert, 42.5 x 6mm,clear glass, 17mm top1ml SQW-Micro-Insert, 45.9 x 7.6mm,clear glass, round bottom0.1ml MTP-Micro-Insert, 15.5 x 5.7mm,clear glass, flat bottom09 15 076309 15 076309 15 07639mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm9mm PE Cap red, 9 x 5.9mm, 4mm centre hole,Silicone white/PTFE red, with slit,45 shore A, 1.9mm08 05 089008 05 089408 05 0944Deep Well Block „riplate”,Polypropylene,96 Positions (RITTER)Square Well Block „riplate”,Polypropylene,96 Positions (RITTER)Microtiter-Plate,Polypropylene,96 Positions (RITTER)
11. General Consumables17mm HPLC Syringe Filters, 25mm ProFill HPLC Syringe Filters and 30mm HPLC Syringe Filters with Glass Fibre Prefilter17 16 207617 16 207717mm HPLCSyringe FilterPTFE,0.2μm,Injection-moulded ringblue Print of themembrane type17mm HPLCSyringe FilterPTFE,0.45μm,Injection-moulded ringyellow Print of themembrane typeHydrophobic(water repellent)Hydrophobic(water repellent)17 16 207817 16 207917 16 208017mm HPLC17mm HPLC17mm HPLCSyringe FilterSyringe FilterSyringe FilterRegeneratedRegeneratedNylon (PA),Cellulose (RC), 0.2μm, Cellulose (RC), 0.45μm,0.2μm,Injection-moulded ring Injection-moulded ring Injection-moulded ringgrey Print of thebrown Print of thepurple Print of themembrane typemembrane typemembrane typeHydrophilicHydrophilic17 16 208117 16 208217 16 208317mm HPLC17mm HPLC17mm HPLCSyringe FilterSyringe FilterSyringe FilterNylon (PA),Glass Fibre Prefilter/PVDF Glass Fibre lded ring Injection-moulded ringInjection-mouldedgreen Print of theblack Print of thering red Print of themembrane typemembrane typemembrane typeHydrophilicHydrophilicHydrophilicHydrophilic25 16 034625 16 034725 16 034825 16 034925 16 035025 16 0351ProFillTM25mm HPLC Syringe Filter,PTFE,green,0.20µmProFillTM25mm HPLC Syringe Filter,PTFE,natural,0.45µmProFillTM25mm HPLC Syringe Filter,Regenerated Cellulose (RC),blue,0.20µmProFillTM25mm HPLC Syringe Filter,Regenerated Cellulose (RC),yellow,0.45µmProFillTM25mm HPLC Syringe Filter,Nylon (PA),bright blue,0.20µmProFillTM25mm HPLC Syringe Filter,Nylon (PA),bright green,0.45µm100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bagadd. packed in a blue PP-Box100 pcs. per PE-Bag, add. packed in a blue PP-Box30 16 208630
Internet: www.la-pha-pack.com, E-Mail: service@la-pha-pack.com With instrument(s): With instrument(s): With instrument(s): With instrument(s): 3 11 09 0500 11 09 0519 11 09 0520 11 19 1205 11 19 1516 06 09 0357 06 09 0669 06 09 0865 06 09 0866 1.5ml short Thread Vial, 32 x 11.6mm, clear glass, 1st hydrol. class, wide opening
