WIXLIB

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESAS-II Compression PackerThe T611 AS-II Double Grip Retrievable Packer is used forproduction, stimulation and testing. The mechanical upper hold downsystem reduces the cost and maintenance of a button type hydraulichold down system. The AS-II Packer is equipped with a running bypassthat reduces swabbing. Set down weight closes the bypass valve, setsthe upper and lower slips and energizes the packing elements. Theclosed bypass valve activates the pressure balanced hold down system.Pressure from below aids in holding the bypass valve closed andpreventing upward movement of the tubing string.Features and Benefits No hydraulic hold down buttons. Built in unloader washes debris when retrieving. Sequential release upper slip system. Available in automatic and manual configurations.AS-II Production PackerSIZEInches (mm)CASING WEIGHTlbs/ft (kg/m)MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER2.875 (73.00)6.4-6.5 (9.5-9.7)2.250 (57.15)0.610 (15.49)T611-25A-0002.875 (73.00)6.4-6.5 (9.5-9.7)2.250 (57.15)0.610 (15.49)T611-25A-0103.500 (88.90)7.7-10.2 (11.5-15.0)2.781 (70.63)1.235 (31.37)T611-35A-0003.500 (88.90)7.7-10.2 (11.5-15.0)2.781 (70.63)1.235 (31.37)T611-35A-0104.500 (114.30)13.5-15.1 (20.9-22.5)3.661 (92.99)1.923 (48.84)T611-45B-0004.500 (114.30)9.5-13.5 (14.1-20.9)3.750 (95.25)1.923 (48.84)T611-45A-0005.000 (127.00)18.0-21.4 (26.8-31.8)4.000 (101.60)1.923 (48.84)T611-50B-0005.000 (127.00)15.0-18.0 (22.3-26.8)4.125 (104.78)1.923 (48.84)T611-50A-0005.500 (139.70)14.0-20.0 (20.8-29.8)4.625 (117.48)1.985 (50.42)T611-55A-0005.500 (139.70)23.0-26.0 (34.2-38.7)4.406 (111.91)2.360 (59.94)T611-56E-0005.500 (139.70)20.0-23.0 (29.8-34.2)4.500 (114.30)2.360 (59.94)T611-56B-0005.500 (139.70)15.5-20.0 (23.1-29.8)4.625 (117.48)2.360 (59.94)T611-56A-0005.500 (139.70)13.0-14.0 (19.3-20.8)4.781 (121.44)2.360 (59.94)T611-56C-0007.000 (177.80)26.0-32.0 (38.7-47.6)5.875 (149.23)2.485 (63.12)T611-70A-0007.000 (177.80)17.0-29.0 (25.3-43.2)5.969 (151.61)2.485 (63.12)T611-70C-0007.000 (177.80)17.0-26.0 (25.3-38.7)6.000 (152.40)2.485 (63.12)T611-70B-0007.000 (177.80)26.0-32.0 (38.7-47.6)5.875 (149.23)2.985 (75.82)T611-73A-0007.000 (177.80)17.0-29.0 (25.3-43.2)5.969 (151.61)2.985 (75.82)T611-73C-0007.000 (177.80)17.0-29.0 (25.3-43.2)6.000 (152.40)2.985 (75.82)T611-73B-000COMPLETION TOOLS CATALOG 20199

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESAS-3 Single Grip PackerThe T631 AS-3 Single Grip Packer is designed for use in wells whereminimal differential from below is anticipated and where a hold downdevice is not needed. It is set by applying a quarter turn to the rightat the packer followed by set-down weight. The packer is releasedby straight pick-up to open the large by pass allowing equalization.After equalization, the packing elements release reducing tendencyof swabbing when pulling out of wellbore. Full opening design allowsunrestricted fluid flow and wireline tool movement through the tubing.Features and Benefits Premium thread connection available upon request. Set by a quarter right-hand rotation and set down weight. Large by-pass for ease of running and swabbing prevention when retrieving. Available with optional setting bottom configurations. Straight pick-up to release. Full through bore allows for unrestricted fluid flow and wireline tool access.AS-3 Single Grip PackerSIZEInches (mm)MAX O.D.Inches (mm)MIN I.D.Inches (mm)4.500 (114.30)3.750 (95.25)1.933 (49.10)T631-45A-0005.500 (139.70)4.500 (114.30)1.985 (50.42)T631-55B-0005.500 (139.70)4.625 (117.48)1.985 (50.42)T631-55A-0005.500 (139.70)4.500 (114.30)2.360 (59.94)T631-56B-0005.500 (139.70)4.625 (117.48)2.360 (59.94)T631-56A-0005.500 (139.70)4.781 (121.44)2.360 (59.94)T631-56C-0006.625 (168.28)5.500 (139.70)2.485 (63.12)T631-65A-0007.000 (177.80)5.875 (149.23)2.485 (63.12)T631-70A-0007.000 (177.80)5.969 (151.61)2.485 (63.12)T631-70C-0007.000 (177.80)6.000 (152.40)2.485 (63.12)T631-70B-0007.625 (193.68)6.453 (163.91)2.485 (63.12)T631-75A-0007.625 (193.68)6.625 (168.28)2.485 (63.12)T631-75B-0008.625 (219.08)7.500 (190.50)2.485 (63.12)T631-85A-0009.625 (244.48)8.250 (209.55)3.985 (101.22)T631-95A-0009.625 (244.48)8.500 (215.90)3.985 (101.22)T631-95B-000COMPLETION TOOLS CATALOG 2019PRODUCTNUMBER10

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESAS-4 10K Compression Set PackerThe T609 AS-4 Double Grip, Compression-Set Packer is used forproduction, stimulation, TCP and testing. The AS-4 is ideally suitedfor installations where the packer is run, the well perforated, treated,swabbed and put on production. A large mandrel matching the tubingI.D. gives unrestricted flow and allows the passage of wireline toolsand other accessories. An internal by-pass valve reduces the swabbingeffect when running or retrieving the packer. Set down weight closesthe by-pass valve, sets the upper and lower slips and energizes thepacking elements. The by-pass, located near the packing elementsallows debris to be washed from the upper slips when the packer isreleased. The AS-4 also features an upper slip releasing system thatreduces the force required to release the packer.Features and Benefits A compensating piston helps hold the by-pass valve closed. An internal by-pass reduces swabbing effect when running or retrieving. The by-pass valve below the upper slips allows debris to be washed from theslips when it is opened. Standard tool is set with quarter turn to the right and set down weight. Released by straight pick up. No hydraulic hold-down buttons, reducing possible leak paths. Standard packer is equipped with nitrile packing elements. Can be supplied with HNBR, Fluorel or Aflas packing elements and seals foruse in hostile environments. (See Elastomer Guide, page 69.) Premium threads available upon request missing from features.AS-4 10K Compression Set PackerSIZEInches (mm)CASING WEIGHTlb/ft (kg/m)MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER4.500 (114.30)9.5 - 13.5 (14.14 - 20.09)3.750 (96.25)1.923 (48.84)T609-45A-010.0025.500 (139.70)14.0 - 20.0 (20.83 - 29.76)4.625 (117.48)1.985 (50.42)T609-55A-010.0025.500 (139.70)15.5 - 17.0 (23.06 - 25.30)4.625 (117.48)2.360 (59.94)T609-56A-0007.000 (177.80)26.0 - 32.0 (38.69 - 47.62)5.875 (149.23)2.485 (63.12)T609-70A-010.0027.000 (177.80)17.0 - 26.0 (25.30 - 47.62)6.000 (152.40)2.485 (63.12)T609-70B-010.002COMPLETION TOOLS CATALOG 201911

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESAS-5 Anchor PackerThe T628 AS-5 Anchor Packer is the upper packer in a zoneisolation completion. The packer was designed to run above the AS-6Compression Packer. The AS-5 Packer sets by applying weight whichcloses the bypass seal and energizes the packing elements. Onceset, the AS-5 can be locked in place allowing the tubing string to beremoved using the T-2 On/Off Tool. The AS-5 sets and releases withone quarter turn right-hand rotation at the packer.Features and Benefits Allows tubing disconnect in straddle completions. Sequential release slip system. Large bypass area. Equalizing bypass system opens before upper slips are released. Premium thread connection available upon request. Packing element combo available up to 450 F. (See Elastomer Guide, page 69.)AS-5 Anchor PackerSIZEInches (mm)MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER4.500 (114.30)3.750 (95.25)1.925 (48.90)T628-45A-0005.000 (127.00)4.125 (104.78)1.925 (48.90)T628-50A-0005.500 (139.70)4.500 (114.30)1.985 (50.42)T628-55B-0005.500 (139.70)4.625 (117.48)1.985 (50.42)T628-55A-0005.500 (139.70)4.500 (114.30)2.360 (59.94)T628-56B-0005.500 (139.70)4.625 (117.48)2.360 (59.94)T628-56A-0005.500 (139.70)4.781 (121.84)2.360 (59.94)T628-56C-0007.000 (177.80)6.000 (152.40)2.485 (63.12)T628-70B-0009.625 (244.48)8.250 (209.55)3. 985 (101.22)T628-95A-0009.625 (244.48)8.500 (215.90)3.985 (101.22)T628-95B-000COMPLETION TOOLS CATALOG 201912

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESAS-6 Anchor PackerThe T629 AS-6 Anchor Packer is a single grip compression packerdesigned for use as the bottom packer in a zonal isolation completion.It is typically used in conjunction with a T-628 AS-5 anchor packer toprovide a two packer system, set by compression. This combinationin conjunction with a T-2 On/Off Tool allows for zonal isolationwhile providing the facility to retrieve the tubing if required withoutdisturbing the packers. It is set by applying a quarter turn at the packerand setting down weight and is released by straight pick up. It has anextended seal area which allows tubing movement and/or pressurechanges between the packers. It can also be used as a single gripproduction packer in applications where low differential pressuresfrom below are anticipated.Features and Benefits Extended stroke seal area maintains a seal in all conditions. Large by-pass area facilitates fast run in and alleviates swabbing whenretrieving. Available in right or left hand automatic or manual J-slot configurations. Sets with compression and retrieves with straight pull. Can be used as a single string production packer in suitable conditions.AS-6 Anchor PackerSIZEInches (mm)CASING WEIGHTlb/ft (kg/m)MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER4.500 (114.30)9.5 - 13.5 (14.14 - 20.09)3.750 (95.25)1.925 (48.90)T629-45A-0005.000 (127.00)11.5 - 15.1 (17.11 - 22.32)4.125 (104.78)1.925 (48.90)T629-50A-0005.500 (139.70)14.0 - 20.0 (20.83 - 29.76)4.625 (117.48)1.985 (38.90)T629-55A-0005.500 (139.70)20.0 - 23.0 (29.76 - 34.22)4.500 (114.30)2.360 (59.94)T629-56B-0005.500 (139.70)15.5 - 20.0 (23.06 - 29.76)4.625 (117.48)2.360 (59.94)T629-56A-0005.500 (139.70)13.0 - 14.0 (19.34 - 20.83)4.781 (121.44)2.360 (59.94)T629-56C-0007.000 (177.80)17.0 - 26.0 (25.30 - 38.69)6.000 (152.40)2.485 (63.12)T629-70B-000COMPLETION TOOLS CATALOG 201913

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESCompPro HS-I HydraulicProduction PackerThe T650 CompPro HS-I Hydraulic Production Packer is a highpressure hydraulic-set double grip production packer for use in wellswhere it is desirable to set after the well has been flanged up. It isequally suitable for single completions or in wells where multiplepackers are required, because the pressure balance system is zoneactivated thus offsetting pressure differentials across the packer. Allparts are locked to prevent presetting due to pressure build up ordebris when running in. It is retrieved by a straight pull shear release.Features and Benefits Suitable for single or multiple packer completions. All components are locked to prevent premature setting during run in. Set by hydraulic pressure from surface against a plug or ball below thepacker. Once set the release shear mechanism is unaffected by differentialpressures. A pressure balanced system offsets pressure reversals. Released by a straight pull.CompPro HS-I Hydraulic Production PackerSIZEInches (mm)CASING WEIGHTlb./ft. (kg/m)MAX O.D. Inches(mm)MIN I.D.Inches (mm)PRODUCTNUMBERT650-45B-0004.500 (114.30)15.10 (22.47)3.656 (92.86)1.984 (50.39)4.500 (114.30)9.5 - 13.5 (14.14 - 20.09)3.750 (95.25)1.984 (50.39)T650-45A-0005.000 (127.00)15.0 - 18.0 (22.32 - 26.78)4.125 (104.78)1.984 (50.39)T650-50B-0005.000 (127.00)11.5 - 15.0 (17.11 - 29.76)4.250 (107.951.984 (50.39)T650-50A-0005.500 (139.70)20.0 - 23.0 (29.76 - 34.22)4.500 (114.30)1.984 (50.39)T650-55B-0005.500 (139.70)14.0 - 20.0 (20.83 - 29.76)4.625 (117.48)1.984 (50.39)T650-55A-0007.000 (177.80)26.0 - 32.0 (38.69 - 47.62)5.875 (149.23)2.484 (63.09)T651-70A-0007.000 (177.80)17.0 - 26.0 (25.30 - 38.69)6.000 (152.40)2.484 (63.09)T651-70B-0007.000 (177.80)26.0 - 32.0 (38.69 - 47.62)5.875 (149.23)2.984 (75.79)T650-73A-0007.000 (177.80)17.0 - 26.0 (25.30 - 38.69)6.000 (152.40)2.984 (75.79)T650-73B-0007.625 (193.68)33.7 - 39.0 (50.15 - 58.03)6.453 (163.91)2.984 (75.79)T650-75A-0007.625 (193.68)20.0 - 33.7 (29.76 - 50.15)6.625 (168.28)2.984 (75.79)T650-75B-0009.625 (244.48)40.0 - 53.5 (59.52 - 79.61)8.250 (209.55)2.984 (75.79)T650-95A-0009.625 (244.48)32.3 - 43.5 (48.06 - 42.01)8.500 (215.90)2.984 (75.79)T650-95B-0009.625 (244.48)40.0 - 53.5 (59.52 - 79.61)8.250 (209.55)3.938 (100.03)T650-96A-000COMPLETION TOOLS CATALOG 201914

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESFX Retrievable Sealbore PackerThe T265 FX Retrievable Sealbore Packer is run on electric line witha wireline adapter kit and setting tool or on tubing using a hydraulicsetting tool. All the load bearing parts are designed to withstand hightensile loads and the bi-directional slips prevent any movement aftersetting. It is retrieved by a straight pull release mechanism using a FXPacker Retrieving Tool.Features and Benefits Designed for use in vertical, deviated or horizontal well completionapplications. Bi-directional slips prevent any movement after setting. An internal locking device maintains pack off. Retrieved by a straight pull shear release using a Forum Pack retrieving tool. Retrieving tool has an emergency shear release feature in the event that thepacker does not release. Available with materials and elastomers suitable for standard or sourservicesFX Retrievable Sealbore PackerSIZEInches (mm)MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER4.500 (114.30)3.906 (99.21)2.500 (63.50)T265-45A-0005.500 (139.70)4.625 (117.47)3.000 (76.20)T265-56B-0005.500 (139.70)4.625 (117.47)3.000 (76.20)T265-56A-0007.000 (177.80)5.813 (150.83)4.000 (101.60)T265-73A-000T265-73B-0007.000 (177.80)5.938 (152.40)4.000 (101.60)7.000 (177.80)6.000 (152.40)4.000 (101.60)T265-73C-0007.625 (193.68)6.438 (163.53)4.000 (101.60)T265-76A-0007.625 (193.68)6.688 (169.88)4.000 (101.60)T265-76B-000COMPLETION TOOLS CATALOG 201915

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESRSB-1 Retrievable Sealbore PackerThe T1265 RSB-1 is a Retrievable Sealbore Packer designed foruse in applications where a long tailpipe assembly is required. It isset hydraulically using a RSB-1 Hydraulic Setting Tool. The packermay be set on E-Line or the Model G Hydraulic Setting Tool with theappropriate Wireline Adapter Kit when run without tailpipe. Onceset, the packer does not require string weight or tension to remainanchored. All the load bearing parts are designed to withstand hightensile loads and the bidirectional slips to prevent any movementof the tool. The packer is retrieved by a straight pull shear releasemechanism. The packer has two sealbores in the standard 7" size, afull bore 3.875" (98.43mm) I.D. and an upper sealbore I.D. of 4.75"(120.65mm) to accept an anchor seal assembly.Features and Benefits Designed for use in vertical, deviated or horizontal well completions. Bi-directional slips which prevent movement after setting. An internal locking system maintains pack-off. Full bore I.D. matches tubing and extended tailpipe. Both setting pressure and shear release is field adjustable. Ideal for anchoring a liner in multi-zone stimulation system.RSB-1 Retrievable Sealbore PackerSIZEInches (mm)CASING WEIGHTlbs/ft (kg/m)7.000 (177.80)29.0 - 35.0 (43.15 - 52.08)5.875 (149.23)3.875 (98.43)T1265-74A-0007.000 (177.80)23.0 -32.0 (34.22 - 47.62)5.938 (150.83)3.875 (98.43)T1265-74B-000.001COMPLETION TOOLS CATALOG 2019MAX O.D.Inches (mm)MIN I.D.Inches (mm)PRODUCTNUMBER16

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESRSB-1 Hydraulic Setting ToolThe T1062 RSB-1 Hydraulic Setting Tool is designed for use insetting RSB-1 Retrievable Sealbore Production Packers. It is operatedby applying pressure from surface against a temporary plug belowthe packer or a setting ball circulated to a seat at the bottom of thetool. Once the packer has been set, the tool can be released by theapplication of 10-12 rounds of right-hand rotation. When released openports in the tool allow circulation or drainage to occur while pulling outof the well.Features and Benefits The packer is set by surface pressure applied against a temporary plugbelow the packer or a setting ball circulated to a seat in the setting tool. Provides the ability to test the annulus after setting the packer. Dual setting chambers provide high setting force capabilities with relativelylow setting pressures. The setting tool is released from the packer by 10-12 turns to the right at thepacker. When released from the packer, ports are open in the tool allowing fluidcirculation and/or drainage while pulling out.RSB-1 Hydraulic Setting ToolSIZEInches (mm)MAX O.D.Inches (mm)MIN I.D.Inches (mm)UPPER THREADCONNECTIONPRODUCTNUMBER7.000 (177.80)5.880 (149.35)1.750 (44.45)3.500" IF BOXT1062-70A-030.0357.000 (177.80)5.880 (149.35)1.750 (44.45)3.500" EU 8 RD BOXT1062-70A-003-35EUCOMPLETION TOOLS CATALOG 201917

COMPLETION TOOLS CATALOGCompletion and Service ToolsCOMPLETION SERVICESComp-Perm FX Sealbore PackerThe T670 Comp-Perm FX Sealbore Production Packer is aversatile permanent packer that can be used for single or multizonecompletions. The packer is ideally suited for wells where high-pressure,temperatures and corrosive fluids are anticipated. The packer isavailable in a variety of elastomers and sealbore materials to meet themost hostile down hole environments. Comp-Perm is recommendedfor injection, stimulation, testing or can be converted into a temporarybridge plug by using a knock-out, pump-out or screw-out plug bottomassembly.The Comp-Perm FX Packer is available with a complete line of tubingseal accessories, seal assemblies and elastomers.Features and Benefits Electric line set or hydraulic set. Components keyed for milling. Anti-extrusion rings expand to casing I.D. to prevent rubber extrusion. Designed to accommodate competitive seal bore accessories. Slip design allows for fast run-time.Comp-Perm FX Sealbore PackerSIZEInches (mm)CASING WEIGHTlb/ft (kg/m)MAX O.D.PACKER BORE MIN. BORE THRU SEALSInches (mm) Inches (mm)Inches (mm)4.500 (114.30)9.5-13.5 (14.4-20.1)3.750 (95.20)2.688 (68.28)1.938 (49.29)T670-45A-0005.000 (127.00)15.0-18.0 (22.3-26.8) 3.968 (100.79)2.688 (68.28)1.938 (49.23)T670-50A-0005.500 (139.70)13.0-17.0 (19.3-25.3) 4.562 (115.87)2.688 (68.28)1.938 (49.23)T670-55A-0005.500 (139.70)17.0-23.0 (25.3-34.2) 4.437 (112.70)2.688 (68.28)1.938 (49.23)T670-55B-0007.000 (177.80)23.0-32.0 (43.2-47.6) 5.687 (144.45)3.250 (82.55)2.406 (61.11)T670-70B-0007.000 (177.80)32.0-38.0 (47.6-56.5) 5.473 (139.01)3.250 (82.55)2.406 (61.11)T670-70C-0007.000 (177.80)17.0-20.0 (25.3-29.8) 6.187 (157.15)3.250 (82.55)2.406 (61.11)T670-70A-0007.000 (177.80)20.0-23.0 (29.8-34.2) 6.000 (152.40) 4.000 (101.60)3.000 (76.20)T670-71A-0007.000 (177.80)26.0-29.0 (38.7-43.2) 5.875 (149.23) 4.000 (101.60)3.000 (76.20)T670-71B-0007.000 (177.80)32.0-38.0 (47.6-56.4) 5.687 (144.45) 4.000 (101.60)3.000 (76.20)T670-71C-0007.625 (193.70)24.0-33.7 (35.7-50.2) 6.500 (165.10) 4.000 (101.60)3.000 (76.20)T670-76A-0007.625 (193.70)33.7-39.0 (50.2-58.0) 6.250 (158.75) 4.000 (101.60)3.000 (76.20)T670-76B-0009.625 (244.50)29.3-53.5 (43.6-79.6) 8.125 (206.38) 4.750 (120.65)3.875 (98.43)T670-97A-0009.625 (244.50)36.0-47.0 (53.6-69.9) 8.438 (214.33) 6.000 (152.40)4.875 (123.83)T670-98B-0009.625 (244.50)4

COMPLETION TOOLS CATALOG 2019 4 COMPLETION TOOLS CATALOG Completion and Service Tools COMPLETION SERVICES ASI-X Production Packer The T600 ASI-X Production Packer is a double grip retrievable packer. It is normally set and retrieved using a quarter-turn to the right but it can be modified to be run on electric wireline if preferred. It is .