Transcription
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSTUBINGRadiant Parts SubmittalTUBINGA Slinky is suspended on elastic threads around itself.There is no reinforcement along its length. Thus making itremarkably flexible and free to move. The shape remainsround. It never kinks, although the bending radius isminimal.simultaneously with theorientation. Peroxidecrosslinking guaranteesoptimal tubing properties.Similarly, PEX molecular chains extend around the tubinglike the Slinky string circles around itself. This makesMrPEX Tubing extremely flexible and less likely to kink.The molecular chain is aligned to resist stress aroundits perimeter. It is unusually strong, resisting insidepressure.MrPEX Barrier PEX Tubinghas an Oxygen DiffusionBarrier which meets thestringent requirements of the European DIN 4726standard. This standard restricts the amount of oxygenthat is allowed to permeate the pipe and affect corrodiblecast iron or steel components within the system. Thestandard restricts permeation to less than or equal to 0.10g/(m3 d). This is considered to be a safe level.The molecular orientation is achieved during extrusionin a very unique process. Crosslinking occursOxygen DiffusionMrPEX PEX-A TUBING WITH OXYGEN BARRIERMrPEX Barrier PEX tubing is Cross-Linked Polyethylene (PEX-a) manufactured in accordance with ASTM F 876.Tubing is listed to ASTM F 876/877 (CSA B137.5) and ICC-PMG 1053, and also certified by NSF (NSF-rfh). MrPEX Barrier PEX tubing is rated by the Hydrostatic Stress Board of PPI (Plastics Pipe Institute) at: 160 psi at 73.4 F; 100psi at 180 F; 80 psi at 200 F. MrPEX Barrier PEX tubing has an EVOH oxygen barrier that meet DIN 4726. Tubingsizes 3/8” through 3/4” also has a thin coating of PE on top of the barrier in order to reduce noise when installed injoist applications and Aluminum heat transfer plates.SELECTEDPART#TYPEUNIT12100603/8"600 ft.12101003/8"1000 ft.12200301/2"300 ft.12200501/2"500 ft.12201001/2"1000 ft.12201201/2"1200 ft.12201601/2"1600 ft.12300305/8"300 ft.12300335/8"330 ft.12300505/8"500 ft.12301005/8"1000 ft.12301105/8"1100 ft.12400103/4"100 ft.12400303/4"300 ft.12400403/4"400 ft.12400503/4"500 ft.CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalTUBINGSELECTEDPART#TYPEUNIT12410203/4"20 ft. Sticks (200 ft.)12500101"100 ftQTYMrPEX PEX-a Tubing with Oxygen Barrier (cont.)SELECTEDPART#TYPEUNIT12500301"300 ft12510201"20 ft. Sticks (200 ft.)12600151 -1/4"150 ft12610101 -1/4"20 ft. Sticks (100 ft.)12700151 -1/2"150 ft12710101 -1/2"20 ft. Sticks (100 ft.)QTYMrPEX PEX-AL-PEX TUBINGMrPEX PEX-AL-PEX tubing is a composite pipe manufactured to ASTM F 1281-2005 (CSA B137.10). MrPEX PEXAL-PEX tubing is certified by NSF (NSF-rfh) and temperature/pressure rated by the Hydrostatic Stress Board of PPI(Plastics Pipe Institute) in accordance with ASTM F 1281-2005 (CSA B137.10) to 160 psi at 200 F.SELECTEDPART#TYPEUNIT13200251/2"250 ft Orange Coil13200301/2"300 ft Orange Coil13201001/2"1000 ft Orange Coil13210801/2"Tube of 40 – 20 ft OrangeSticks13220301/2"Box of 3 – 100 ft OrangeCoils13300405/8"400 ft Orange Coil13300505/8"500 ft Orange Coil13400303/4"300 ft Orange Coil13400503/4"500 ft Orange Coil13410323/4"Tube of 16 – 20 ft OrangeSticks13420203/4"Box of 2 – 100 ft OrangeCoils13500101"100 ft Orange Coil13500301"300 ft Orange Coil13500501"500 ft Orange Coil13510201"Tube of 10 – 20 ft OrangeSticksCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSPEX-AL-PEX FITTINGSRadiant Parts SubmittalPEX-AL-PEX FITTINGSPRESS FITTINGS FOR PEX-AL-PEX TUBINGMrPEX Press Fittings for use with MrPEX ASTM F1281-2005 PEX-AL-PEX tubing in radiant applications. Thebody is made from DZR brass, double o-rings, and a stainless steel press sleeve. An accurately installed press fittingoffers a fast, reliable, and permanent connection.NOTE: Must use reamer on any PEX-AL-PEX fittingsPress Fitting AssembliesSELECTEDPART#TYPEUNIT21105001/2" PAP to EK 20Bag of 1021106255/8" PAP to EK 20Bag of 10PART#TYPEUNIT23150501/2" PAP to 1/2" PAPBag of 1022163635/8" PAP to 5/8" PAPBag of 1023175753/4" PAP to 3/4" PAPBag of 1023110101" PAP to 1" PAPBag of 5QTYPress Couplings DZRSELECTEDQTYPress Transition to NPT DZRSELECTEDPART#TYPEUNIT23250501/2" PAP to 1/2" NPTBag of 1023250751/2" PAP to 3/4" NPTBag of 1022263755/8" PAP to 3/4" NPTBag of 1023275753/4" PAP to 3/4" NPTBag of 1023210101" PAP to 1" NPTBag of 5QTYPress Transition to FIP DZRSELECTEDPART#TYPEUNIT23350501/2" PAP to 1/2" FIPBag of 1023375753/4" PAP to 3/4" FIPBag of 1023310101" PAP to 1" FIPBag of 5CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalPEX-AL-PEX FITTINGSPress Sweat Adapter DZRSELECTEDPART#TYPEUNIT23550501/2" PAP to 1/2" CUBag of 1023550751/2" PAP to 3/4" CUBag of 1023575753/4" PAP to 3/4" CUBag of 1023510101" PAP to 1" CUBag of 5PART#TYPEUNIT23650501/2" PAP to 1/2" PAPBag of 1023675753/4" PAP to 3/4" PAPBag of 1023610101" PAP to 1" PAPBag of 5QTYPress Elbow DZRSELECTEDQTYPress Elbow to Sweat Adapter DZRSELECTEDPART#TYPEUNIT23800571/2" PAP to 3/4" CUBag of 1023800773/4" PAP to 3/4" CUBag of 10PART#TYPEUNIT23975773/4" PAP x 3/4" PAP x 3/4"PAPBag of 1023910111" PAP x 1" PAP x 1" PAPBag of 5QTYPress Tee DZRSELECTEDQTYCOMPRESSION FITTINGS FOR PEX-AL-PEX TUBINGMrPEX Compression Fitting Assemblies for connection of MrPEX PEX-AL-PEX tubing to MrPEX Manifolds ortransition fittings with EK (Eurokonus) connection. Fittings consist of a nut, insert and compression ring made ofbrass. Insert features double o-ring and EK (Eurokonus) seat.PEX-AL-PEX Fitting AssembliesSELECTEDPART#TYPEUNIT24105001/2" PAP to EK 20Bag of 1024106255/8" PAP to EK 20Bag of 1024307503/4" PAP to EK 25Bag of 10CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalPEX-AL-PEX FITTINGSPEX-AL-PEX Repair Coupling with Fitting AssemblySELECTEDPART#TYPEUNIT24210101" PAP to 1" PAPBag of 10QTYPEX-AL-PEX Transition with Fitting AssemblySELECTEDPART#TYPEUNIT24450501/2" PAP to 1/2" NPTBag of 1024463755/8" PAP to 3/4" NPTBag of 1024475753/4" PAP to 3/4" NPTBag of 1024410101" PAP to 1" NPTBag of 1024563755/8" PAP to 3/4" FIPBag of 1024575753/4" PAP to 3/4" FIPBag of 1024610131" PAP to 1 1/4" CUBag of 1024510101" PAP to 1" FIPBag of 10CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSMANIFOLDSRadiant Parts SubmittalMANIFOLDS1 1/4” STAINLESS STEEL MANIFOLDS FOR UP TO 5/8” PEXAND PEX-AL-PEX TUBING, 2–12 LOOPSMrPEX 1 1/4” Stainless Steel manifolds achieves the highest level of long term corrosion resistance by using a brightannealed high-grade, Type 304, stainless steel with high nickel content. This creates a stable material structurewith low levels of ferrite and magnetism. To eliminate the possibility of contact corrosion. The manifolds are fullyassembled, ready for mounting, The supply side feature adjustable flow-meters for flows up to 1.45 gpm per loop, andthe return side has balancing on/off valves, in accordance with DIN EN 1264-4. The adjustable flow-meter allows fora positive shut-off and the manual plastic cap on the return valve can be removed to accommodate a valve actuator#5120700 or #5120701. The return balancing valve disc is designed to enable exact adjustments of small flows whilestill being able to handle large flow with minimal resistance. The branch Cv value is 1.38 and the manifold bodyaccommodates flows up to 14 gpm. The supply and return manifold bodies both have wells to accomodate optionalthermometers, and a multi-function swivel End Cap allowing for Fill/Drain or Vent. Each inlet of the manifold hasa G 1” thread (BSP straight metric thread) allowing for easy connections of the supply and return mains. Use only“MrPEX Manifold Option” adapters for appropriate connection. The branches have Eurokonus (EK20) connections,and all MrPEX EK20 compression fitting assemblies (PEX to EK20 or PEX-AL-PEX to EK20) can be used to connecttubing to the manifold.MrPEX 1 1/4” Stainless Steel ManifoldSELECTED* Shipped as shownPART#TYPEUNIT32302002 BranchesEach32303003 BranchesEach32304004 BranchesEach32305005 BranchesEach32306006 BranchesEach32307007 BranchesEach32308008 BranchesEach32309009 BranchesEach323100010 BranchesEach323110011 BranchesEach323120012 BranchesEachQTYMrPEX Manifold ThermometerSELECTEDPART#TYPEUNIT323000132F to 175FSet of 2CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSMANIFOLDSRadiant Parts Submittal1 1/2” LARGE STAINLESS STEEL MANIFOLDS FOR 5/8” AND 3/4” PEXAND PEX-AL-PEX TUBINGMrPEX 1 1/2” Large Stainless Steel Manifolds are madefrom high-quality Type 304 stainless steel and offered in3–10 loop sections. The manifold body comes with G 1 1/2”flat gasket unions for connection of inlet ball valve G 1 1/2” x1 1/2” Female NPT and end caps. The branches comes with G1” flat gasket unions to accomodate the on/off and balancingbranch valves G 1” x EK 25 for easy connection with MrPEX EK 25 fitting assemblies (PEX to EK25 or PEX-AL-PEX toEK25) to connect tubing to the manifold. The branch Cvvalue is 6 and the manifold body accommodates flows up to25 gpm. The manifold Base Kit comes with two brackets, two1 1/2” female NPT ball-valves and two End Caps with fill/drain.1 1/2” Stainless Steel Manifold, Supply & Return Body,G 1” Branch Union, 3” O.C.SELECTEDPART#TYPEUNIT32403003 BranchesSet of 232404004 BranchesSet of 232405005 BranchesSet of 232406006 BranchesSet of 232407007 BranchesSet of 232408008 BranchesSet of 232409009 BranchesSet of 2324100010 BranchesSet of 2QTYBase Kit for 1 1/2” Stainless Manifold, Ball-Valves,Bracket and End Caps with Fill/Drain ValveSELECTEDPART#TYPEUNIT323000132F to 175FSet of 2QTYOn/Off Loop Valve for 1 1/2” Stainless Steel ManifoldsSELECTEDPART#TYPEUNIT3240002G 1" x EK25Box of 10QTYOn/Off Loop Valve with Balancing for 11/2” Stainless Steel ManifoldsSELECTEDPART#TYPEUNIT3240003G 1" x EK25Box of 10NOTE: Manifold shown assembled.CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSMANIFOLDSRadiant Parts SubmittalOn/Off Valve for 1 1/2” Stainless Steel Manifoldswith PEX Compression FittingSELECTEDPART#TYPEUNIT3241063G1" x 5/8" PEX Comp.Box of 103241075G1" x 3/4" PEX Comp.Box of 10QTYOn/Off Valve, w/ balancing for 1 1/2” Stainless Steel Manifolds withPEX Compression FittingSELECTEDPART#TYPEUNIT3241163G1" x 5/8" PEX Comp.Bag of 103241175G1" x 3/4" PEX Comp.Bag of 10QTYManifold Union for 1 1/2” Stainless Steel ManifoldSELECTEDPART#TYPEUNIT3240004G 1 1/4" x G 1 1/4"Set of 2QTYVisual Flowmeter with Balancing/Isolation Valve, 2–8 GPMSELECTEDPART#TYPEUNIT3240006G1" x EK25EachQTYStrap On Pipe Thermometer, 70–200 FSELECTEDPART#TYPEUNIT5240748For Pipes 1/2"–4"Box of 2CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSMANIFOLDSRadiant Parts Submittal1 1/2” LARGE BRASS MANIFOLDS FOR 5/8” & 3/4” PEXAND PEX-AL-PEX TUBING, 2–12 LOOPSMrPEX 1 1/2” Large Brass Manifolds are made from high-quality extruded brass and offered in 2–12 loop fullyassembled manifolds. The supply body has balancing valves with adjustable flow-meters for flows up to 2.0 gpmper loop. The return body is equipped with on/off valves. The manual plastic cap on the return valve can be removedto accommodate a valve actuator #5120700 or #5120701. Actuator valve adapter #5700010 (VA-10) needs to bepurchased separately with the actuator #5120700 or #5120701. The return balancing valve disc is designed to enableexact adjustments of small flows while still being able to handle large flow with minimal resistance. The branch Cvvalue is 1.3 and the manifold body accommodates flows up to 20 gpm. Manifolds are mounted on brackets ready tomount. Inlets comes with a 1 1/4” female NPT union ball-valve and end caps feature vent and fill/drain. The brancheshave EK 25 (Eurokonus) connections, and all MrPEX EK25 fitting assemblies (PEX to EK25 or PEX-AL-PEX to EK25)can be used to connect tubing to the manifold.1 1/2” Manifold Valve & Balancing Flow Meter Fully AssembledSELECTED* Shipped as shownPART#TYPEUNIT33102002 BranchesEach33103003 BranchesEach33104004 BranchesEach33105005 BranchesEach33106006 BranchesEach33107007 BranchesEach33108008 BranchesEach33109009 BranchesEach331100010 BranchesEach331110011 BranchesEach331120012 BranchesEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalMANIFOLDSCOMPOSITE MANIFOLDMrPEX Composite Radiant Manifold is made from a durable high performance glass filled plastic designed towithstand high temperature and pressure. The manifold exceeds the oxygen diffusion standard DIN 4726 and iscompletely corrosion resistant. The manifold has flow capacity of 15.4 GPM with a branch Cv of 1.35 GPM and comespartially assembled as a complete kit.Kit includes:Ő A complete supply body with positive shut-off balancing flowmeters, thermometer, a Fill/Drain valve withVent, and a blank end cap.Ő A complete return body with on/off valves for manual shut-off, thermometer, a Fill/Drain valve with Vent,and a blank end cap.Ő A set of mounting bracketsŐ A set of 1” NPT isolation union ball-valves.Plastic cap on the return valve can be removed to accommodate valve actuator #5120700 or #5120701 (Adapter VA90 part #5700090 is needed). The branches have Eurokonus (EK20) connections, and all MrPEX EK20 compressionfitting assemblies (PEX to EK20 or PEX-AL-PEX to EK20) can be used to connect tubing up to 5/8” to the manifold.Single, 2 loop, and 3 loop add-on supply and return manifold sections and other accessories are sold separately toallow for easy add-on.Composite Manifold, Valve & Flowmeter, Complete KitSELECTED* Shipped as kitPART#TYPEUNIT38102002 LoopEach38103003 LoopEach38104004 LoopEach38105005 LoopEach38106006 LoopEach38107007 LoopEach38108008 LoopEach38109009 LoopEach381100010 LoopEach381110011 LoopEach381120012 LoopEachQTYComposite Manifold Sections, Valve & FlowmeterSELECTEDPART#TYPEUNIT38100011 LoopEach38100022 LoopEach38100033 LoopEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalMANIFOLD FITTINGSComposite Manifold Elbow SetSELECTEDPART#TYPEUNIT381000790 Supply and ReturnElbowsSet of 2QTYCOPPER MANIFOLD ACCESSORIESMrPEX Copper Manifold accessories offer Copper Sweat x EK (Eurokonus) mini-ball valves,allowing PEX or PEX-AL-PEX Compression fittings to be connected for pipes up to 3/4”.Mini Ball ValveSELECTEDPART#TYPEUNIT34650201/2” CU to EK 20Box of 1034675251/2” CU to EK 20Box of 10QTYMini Ball Valve with BalancingSELECTEDPART#TYPEUNIT34650211/2" CU to EK 20Box of 1034675263/4" CU to EK 25Box of 10QTYMANIFOLD FITTINGSMANIFOLD OPTIONSMrPEX Manifold Options offer transitions, end caps and accessories for MrPEX manifolds. Some of the 1 1/4”manifolds and transitions feature a 1” BSP metric straight thread using an o-ring seal. Do Not Use teflon tape orthread sealing compounds for these.Loop End CapSELECTEDPART#TYPEUNIT3610003EK 20Box of 23610004EK 25Box of 2QTYPressure Test Kit, for 1 1/4” Brass & Stainless Steel ManifoldsSELECTEDPART#TYPEUNIT36100051" BSPEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalMANIFOLD FITTINGSPressure Test KitSELECTEDPART#TYPEUNIT37001831" NPTEachQTYPressure Test Kit, for 1 1/2” Brass & Stainless Steel ManifoldsSELECTEDPART#TYPEUNIT37001841 1/2" & 1 1/4" NPTEachPART#TYPEUNIT3610006EK 20 x EK 20Box of 10QTYLoop Branch Ball ValveSELECTEDQTYManifold Transition for 1 1/4” Brass and Stainless SteelSELECTEDPART#TYPEUNIT36200011" BSP to 1" and 1 1/4" CUBag of 236200101" BSP x 3/4" & 1" CUwith Lock NutBag of 236200021" BSP to 3/4" NPTBag of 236200031" BSP to 1" NPTBag of 236200041" BSP to 1" FIPBag of 236200051" BSP to 1" BSP(Manifold Double Nipple)Bag of 236200061" BSP to EK 25Bag of 236200071" BSP to EK 32Bag of 2CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalMANIFOLD FITTINGSManifold Transition Ball Valve for 1 1/4” ManifoldsSELECTEDPART#TYPEUNIT36200191" BSP Union to1" Female NPT, StraightBox of 236200211 BSP Angle Isolation Unionto 1" Female NPTBox of 2QTYLarge Dimension PEX ‘Push-Fit’ TransitionSELECTEDPART#TYPEUNIT44675753/4" PEX x 3/4" NPTEach44610101" PEX x 1" NPTEach44613131 1/4" PEX x 1 1/4" NPTEach44615151 1/2" PEX x 1 1/2" 600031 1/4"Each44600041 1/2"EachQTYDisconnect ToolSELECTEDCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSPEX FITTINGSRadiant Parts SubmittalPEX FITTINGSPEX FITTINGS AND EUROCONUS (EK) FITTINGSMrPEX Compression Fitting Assemblies for connection of MrPEX Barrier PEX tubing to MrPEX Manifolds ortransition fittings with EK (Eurokonus) connection. Fittings consists of a nut, insert and compression ring made ofbrass. Insert features o-ring and EK (Eurokonus) seat.PEX Fitting Assembly (Nut Ring & Insert) for EKSELECTEDPART#TYPEUNIT43103753/8" PEX to EK 20Bag of 1043105001/2" PEX to EK 20Bag of 1043106255/8" PEX to EK 20Bag of 1043107503/4" PEX to EK 20Bag of 1043206255/8" PEX to EK 25Bag of 1043207503/4" PEX to EK 25Bag of 1043310001" PEX to EK 32Bag of 10PART#TYPEUNIT4342050EK 20 to 1/2" & 3/4" CUBag of 104342575EK 25 to 3/4" & 1" CUBag of 104343210EK 32 to 1" & 1 1/4" CUBag of 2PART#TYPEUNIT4372050EK20 to 1/2" NPTBag of 104372575EK25 to 3/4" NPTBag of 104372510EK25 to 1" NPTBag of 24373210EK32 to 1" NPTBag of 2QTYCopper Sweat TransitionSELECTEDQTYNPT TransitionSELECTEDQTYCoupling Nipple for PEX to PEXSELECTEDPART#TYPEUNIT4352020EK 20 to EK 20Bag of 104352525EK 25 to EK 25Bag of 104353232EK 32 to EK 32Bag of 10CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalPEX FITTINGSAXIAL PRESS FITTINGS F2080 FOR PEX TUBINGMrPEX Axial Press Fittings ASTM F2080 for use with MrPEX Barrier PEX tubing in radiant applications. The bodyis made from brass and uses a brass axial press sleeve (sold separately). An accurately installed axial press fittingoffers a fast, reliable, and permanent connection.Axial Press Brass RingsSELECTEDPART#TYPEUNIT45005001/2"Bag of 1045006255/8"Bag of 1045007503/4"Bag of 1045010001"Bag of 10QTYAxial Press Manifold TransitionsSELECTEDPART#TYPEUNIT45010631" BSP x 5/8" PEXBag of 245010751" BSP x 3/4" PEXBag of 245010101" BSP x 1" PEXBag of 2PART#TYPEUNIT45150501/2" PEX x 1/2" PEXBag of 1045163635/8" PEX x 5/8" PEXBag of 1045175753/4" PEX x 3/4" PEXBag of 1045110101" PEX x 1" PEXBag of 10QTYAxial Press CouplingsSELECTEDQTYAxial Press Transition to NPTSELECTEDPART#TYPEUNIT45250501/2" PEX to 1/2" NPTBag of 1045263755/8" PEX to 3/4" NPTBag of 1045275103/4" PEX to 1" NPTBag of 1045275753/4" PEX to 3/4" NPTBag of 1045210101" PEX to 1" NPTBag of 10QTYAxial Press Transition to FIPSELECTEDPART#TYPEUNIT45350501/2" PEX to 1/2" FIPBag of 1045363755/8" PEX to 3/4" FIPBag of 1045375103/4" PEX to 1" FIPBag of 1045375753/4" PEX to 3/4" FIPBag of 1045310101" PEX to 1" FIPBag of 10CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalPEX FITTINGSAxial Press Transition to CU Female SweatSELECTEDPART#TYPEUNIT45550501/2" PEX to 1/2" CUBag of 1045563755/8" PEX to 3/4" CUBag of 1045575103/4" PEX to 1" CUBag of 1045575753/4" PEX to 3/4" CUBag of 1045510101" PEX to 1" CUBag of 10QTYAxial Press ElbowSELECTEDPART#TYPEUNIT45775753/4" PEX x 3/4" PEXBag of 1045710101" PEX x 1" PEXBag of 10CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSCONTROLSRadiant Parts SubmittalCONTROLSZONING CONTROLSMrPEX Zoning Controls offer low voltage electronic zone control featuring thermostats, zone box, valve actuators,zone valves.Digital Room ThermostatsSELECTEDPART#TYPEUNIT5110740Air OnlyEach5110741Air and Floor with 10k FloorSensorEachQTYValve Actuator for Valved 07012-wireEachQTYNOTE: No adapter is needed when used with MrPEX 1 1/4” Stainless SteelManifolds. When used with MrPEX 1 1/4” & 1 1/2” Brass Manifiolds, adapter ring5700010 (VA-10), when used with MrPEX Composite Manifold, use adapter5700090 (VA-90 WE), all adapters need to be purchased separately. Pleasecontact us for other adapter types.Actuator Adapter RingSELECTEDPART#TYPEUNIT5700010For 1 1/2" Brass Manifolds(VA-10)Each5700090For MrPEX CompositeManifold(VA-90 WE)EachQTYZone Valve including actuator with End SwitchSELECTEDPART#TYPEUNIT51207111/2", CU Union x CU Union,Cv 2.1Each51207123/4", CU Union x CU Union,Cv 3.2EachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalZone Valve including actuator with End SwitchCONTROLSSELECTEDPART#TYPEUNIT51207211/2", Female NPT x MaleNPT, Cv 2.1Each51207223/4", Female NPT x MaleNPT, Cv 3.2Each51207231", Female NPT x Male NPT,Cv 4.0Each51207241 1/4", Female NPT x MaleNPT, Cv 4.7EachPART#TYPEUNIT5130704Simple Zone Controller, 24V,Up to 4 ZonesEach5130706with End-Switch and PumpOutput Relay; Up to 6 ZonesEach5130801Single Pump RelayEachQTYZone ControllerSELECTEDQTYSNOW MELT CONTROLSMrPEX Snow Melt Controls offer low voltage snow melt control for 1 or 2 zone applications, Snow/Ice Detector, andsensors.Snow Melt Controller (No sensors included)SELECTEDPART#TYPEUNIT51400011 or 2 ZoneEachQTYSnow Melt Moisture & Temperature SensorSELECTEDPART#TYPEUNIT5140002Surface Mount with 82'CableEachQTYMounting Socket for Snow Melt Moisture SensorSELECTEDPART#TYPEUNIT5140003Surface MountEachQTYSnow Melt Moisture & Temperature SensorSELECTEDPART#TYPEUNIT5140004Gutter Mount with 33' CableEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalOutdoor Air SensorCONTROLSSELECTEDPART#TYPEUNIT514000512k Wall MountEachQTYTemperature SensorsSELECTEDPART#TYPEUNIT514000612k PipeEach514000712k SlabEachQTYMIXING CONTROLSMrPEX Mixing Controls offer brass 3-way and 4-way mixing valves, low voltage floating action or 0-10v motors,and thermostatic 3-way tempering valve.3-Way Thermostatic Mixing Valve (95 F - 131 F)SELECTEDPART#TYPEUNIT52107421", CU UnionEachQTY3-way compact mixing valve of brassSELECTEDPART#TYPEUNIT52503253/4" Copper Sweat Union , Cv 7.3Each52503321" Copper Sweat Union, Cv 13.8Each52503401 1/4" Copper Sweat Union, Cv17.3EachQTY4-way compact mixing valve of brassSELECTEDPART#TYPEUNIT52504253/4" Copper Sweat Union, Cv 7.3Each52504321" Copper Sweat Union, Cv 13.8Each52504401 1/4" Copper Sweat Union, Cv17.3EachQTYSweat Transition for 3-Way and 4-Way Brass Mixing ValvesSELECTEDPART#TYPEUNIT5250002G 1" x 3/4" SweatEach5250003G 1 1/4" x 1" SweatEach5250004G 1 1/2" x 1 1/4" SweatEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalCONTROLSValve Motor 24 VAC 90 70 sec 5 NmSELECTEDPART#TYPEUNIT5220051Floating Action with MountingKitEach52200580–10 V with Mounting KitEachPART#TYPEUNIT5220151for ESBE ValvesEachQTYMotor Adapter KitSELECTEDQTYSmartComfort 110 – Reset Control Motor Kit, with SensorsSELECTEDPART#TYPEUNIT5230110Valve Motor with built-in controlEachQTYSmartComfort 100 – Setpont Control Motor Kit, with SensorSELECTEDPART#TYPEUNIT5230100Valve Motor with built-in controlEachQTYOutdoor Temperature Sensor, Spare PartSELECTEDPART#TYPEUNIT5230101for SmartComfort 110EachQTYSupply Temperature Sensor, Spare PartSELECTEDPART#TYPEUNIT5230102for SmartComfort 110 & 100EachQTYRemote Room Control UnitSELECTEDPART#TYPEUNIT5230103for SmartComfort 110EachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSTOOLS & ACCESSORIESRadiant Parts SubmittalTOOLS & ACCESSORIESHEAT TRANSFER ACCESSORIESMrPEX Accessories feature extruded aluminum heat transfer plates and MrPEX Wood Trac Flooring with omegastyle aluminum heat transfer plates for even heat distribution in suspended applications. RetroPanel is used forretrofit applications on top of existing concrete.Omega Style Aluminum Heat Transfer PlatesSELECTEDPART#TYPEUNIT611070218" x 5" for 1/2" TubingBox of 100QTYDuoTrack Extruded Aluminum Heat Transfer Plates, Pre-drilledSELECTEDPART#TYPEUNIT611073348" x 3.75" for 3/8" or 1/2" PEXBox of 20QTYNOTE: Quick estimate for 8” O.C., ((square footage x 0.9) x 1.5) / 4 Qty ofDuoTrack Plates.RetroPanel Heat Transfer SystemSELECTEDPART#TYPEUNIT611400115 3/4" x 31 1/2" Straightfor 1/2" PEX TubingBox of 10611400215 3/4" x 15 3/4"for 1/2" PEX TubingBox of 206114007Replacement Fastenersfor #6114002Bag of 4QTYNOTE: Estimated list price per square foot of covered area is 8.06.Material estimate; Floor area (sqft) x 0.9 net floor area.Straight Panel Net floor area x 0.70 / 3.44 Qty.Return Panel Net floor area x 0.30 / 1.72 Qty.Wood Trac FlooringSELECTEDPART#TYPEUNIT611500148" x 48" x 3/4" for 1/2" PEX, 8"O.C., for use with #6110702EachQTYNOTE: Use 16 each of part# 6110702 for total coverage. Estimated list price persquare foot of covered area is 8.46. Special order 2-4 week lead time.CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COM
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalTOOLS & ACCESSORIESTUBE FASTENERS AND ORGANIZERSMrPEX Fasteners and associated accessories and tools allow for easy and fast installations of the tubingin slab or suspended applications.Manifold CabinetsSELECTEDPART#TYPEUNIT621242120 4/5" W x 31 1/2" H x 5 1/10" Dfor Surface MountingEach621243126 4/5" W x 31 1/2" H x 5 1/10" Dfor Surface MountingEach621245140 1/2" W x 31 1/2" H x 5 1/10" Dfor Surface MountingEach621342120 4/5" W x 27 1/5–31 1/10" H x5 1/10" D for Recessed MountingEach621343126 4/5" W x 27 1/5–31 1/10" H x5 1/10" D for Recessed MountingEach621345140 1/2" W x 27 1/5–31 1/10" H x4 1/4" D for Recessed MountingEachQTYSurface Manifold Cabinet Selection ChartPART#1 1/4" STAINLESS NOBALL VALVE1 1/4" STAINLESS WITHBALL VALVECOMPOSITE1 1/2" STAINLESS1 1/2" BRASS6212421Up to 7 LoopsUp to 6 LoopsUp to 6 LoopsUp to 4 LoopsUp to 5 Loops6212431Up to 11 LoopsUp to 10 LoopsUp to 10 LoopsUp to 8 LoopsUp to 8 Loops6412451Up to 12 LoopsUp to 12 LoopsUp to 12 LoopsUp to 10 LoopsUp to 12 LoopsRecessed Manifold Cabinet Selection ChartPART#1 1/4" STAINLESS NOBALL VALVE1 1/4" STAINLESS WITHBALL VALVECOMPOSITE1 1/2" STAINLESS1 1/2" BRASS6213421Up to 7 LoopsUp to 6 LoopsUp to 6 LoopsUp to 4 LoopsUp to 5 Loops6213431Up to 11 LoopsUp to 10 LoopsUp to 10 LoopsUp to 8 LoopsUp to 8 Loops6213451Up to 12 LoopsUp to 12 LoopsUp to 12 LoopsUp to 10 LoopsUp to 12 LoopsTacker ToolSELECTEDPART#TYPEUNIT7110223to Mount #7110224EachQTYFoam Insulation Board Tacker Staplesfor 3/8” to 3/4” PEX and 3/8” to 5/8” PAP TubingSELECTEDPART#7110224TYPEUNIT2"Box of300CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSTOOLS & ACCESSORIESRadiant Parts SubmittalFoam Insulation Board Anchor Clipsfor 3/8” to 5/8” PEX and PAP TubingSELECTEDPART#TYPE7110229UNITQTYBag of 50Anchor Clip Mounting ToolSELECTEDPART#TYPEUNIT7110232For #7110229EachQTYPlywood Rider StaplesSELECTEDPART#TYPEUNIT7110235For 3/8" to 5/8" PEXand PAP TubingBox of500QTYRider Staples Mounting GunSELECTEDPART#TYPEUNIT7110236For #7110235EachQTYQuip Clip for Fastening PEX to Wire MeshSELECTEDPART#TYPEUNIT7120225For 1/2" PEXBag of 2507120226For 5/8" & 3/4" PEXBag of 250PART#TYPEUNIT7130211For 3/8" PEX TubingBag of 107130212For 1/2" PEX TubingBag of 107130213For 5/8" PEX TubingBag of 107130214For 3/4" PEX TubingBag of 107130215For 1" PEX TubingBag of 10QTYPlastic Bend SupportsSELECTEDQTYMetal Bend Supports (For Suspended Applications)SELECTEDPART#TYPEUNIT7140375for 3/8" PEX TubingBag of 507140500for 1/2" PEX TubingBag of 507140625for 5/8" PEX TubingBag of 507140750for 3/4" PEX TubingBag of 25CALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalPlastic Conduit Bend Supports (For Concrete Applications)TOOLS & ACCESSORIESSELECTEDPART#TYPEUNIT71538623/8"–5/8" TubingBag of 1071562755/8"–3/4" TubingBag of 10PART#TYPEUNIT6210001For 1 1/4" Stainless Steel Manifolds,Uses Bend Support #7153862EachQTYPipe OrganizerSELECTEDQTYOctaRail for Mounting PEXSELECTEDPART#TYPEUNIT7223875For 3/8", 1/2", 5/8", 3/4" PEX, 3.28 ft(1 Meter) eachBox of100QTYNOTE: Each box of 100 will accommodate 600 ft of PEX based on a 12” O.C, 900ft or 9” O.C, and 1200 for 6” O.C.Plastic Zip TiesSELECTEDPART#TYPEUNIT71200088"Bag of1000QTYINSTALLATION TOOLSMrPEX Installation Tools features tube handling tools for PEX or PEX-AL-PEXas well as prep and press fitting tools for PEX-AL-PEX.Compact Adjustable Tubing UncoilerSELECTEDPART#TYPEUNIT8110720Heavy DutyEachQTYPipe Straightener with BracketSELECTEDPART#TYPEUNIT8110721for 3/4" and 1" PAP TubingEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalTOOLS & ACCESSORIESFeed Eye with BracketSELECTEDPART#TYPEUNIT8110722for PEX TubingEachPART#TYPEUNIT8120878For All Sizes Up to 1 1/4" PEX andPEX-AL-PEX TubingEachPART#TYPEUNIT8120879for 3/8" through 1" TubingEachQTYPipe CutterSELECTEDQTYSimple CutterSELECTEDQTYBurring Reamer for PEX-AL-PEXSELECTEDPART#TYPEUNIT82108725/8" – 3/4" – 1"Each82108741/2" – 5/8" – 3/4"Each82208751/2" – 3/4" – 1"EachQTYExternal Bending Spring for PEX-AL-PEXSELECTEDPART#TYPEUNIT82218821/2" PAPEach82208843/4" PAPEach82208851" PAPEachCALL 1-800-716-3406 or LEARN MORE AT MRPEXSYSTEMS.COMQTY
PROJECT NAMEDATESUBMITTED BYPHONEADDRESSRadiant Parts SubmittalTOOLS & ACCESSORIESManual Press Tool for PEX-AL-PEXSELECTEDPART#TYPEUNIT8230895Manual Press Tool Kit for PEXAL-PEX w/ Inserts1/2",
MrPEX Barrier PEX tubing is Cross-Linked Polyethylene (PEX-a) manufactured in accordance with ASTM F 876. Tubing is listed to ASTM F 876/877 (CSA B137.5) and ICC-PMG 1053, and also certified by NSF (NSF-rfh). MrPEX Barrier PEX tubing is rated by the Hydrostatic Stress Board of PPI (Plastics Pipe Institute) at: 160 psi at 73.4 F; 100
