Transcription
HPE ProLiant ML350 Gen10 Server UserGuideAbstractThis document is for the person who installs, administers, and troubleshoots servers andstorage systems. Hewlett Packard Enterprise assumes you are qualified in the servicing ofcomputer equipment and trained in recognizing hazards in products with hazardous energylevels.Part Number: 870691-004Published: April 2019Edition: 4
Copyright 2017–2019 Hewlett Packard Enterprise Development LPNoticesThe information contained herein is subject to change without notice. The only warranties for HewlettPackard Enterprise products and services are set forth in the express warranty statements accompanyingsuch products and services. Nothing herein should be construed as constituting an additional warranty.Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions containedherein.Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, ComputerSoftware Documentation, and Technical Data for Commercial Items are licensed to the U.S. Governmentunder vendor's standard commercial license.Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett PackardEnterprise has no control over and is not responsible for information outside the Hewlett PackardEnterprise website.AcknowledgmentsmicroSD is a trademark or a registered trademark of SD-3D in the United States, other countries of both.Microsoft , Windows , and Windows Server are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.Red Hat Enterprise Linux is a registered trademark of Red Hat, Inc. in the United States and othercountries.VMware ESXi and VMware vSphere are registered trademarks or trademarks of VMware, Inc. in theUnited States and/or other jurisdictions.
ContentsComponent identification.8Front panel components. 8Serial number/iLO information pull tab.9Front panel LEDs and buttons. 9Server UID LED.10UID button functionality. 11Front panel LED power fault codes. 11Rear panel components.12Rear panel LEDs.13System board components. 15System maintenance switch descriptions. 17DIMM label identification. 17PCIe slot description. 19Processor, heatsink, and socket components.20Drive LEDs and buttons. 20Low profile LFF drive LED definitions. 20Hot-plug drive LED definitions.21NVMe SSD LED definitions.22NVMe SSD button actions. 23Drive bay numbering.24SFF drive bay numbering: Smart Array controller. 25SFF drive bay numbering: SAS expander .26NVMe drive bay numbering.27LFF drive bay numbering: Smart Array controller. 28Fan bay numbering. 28Media device screws.29Expansion board screws.29Setup. 31Optional service. 31Initial server installation.31HPE Installation Service.31Setting up the server. 32Operational requirements. 35Space and airflow requirements.35Temperature requirements. 36Power requirements. 36Electrical grounding requirements.37Server warnings and cautions.37Rack warnings and cautions. 38Electrostatic discharge.39Setting up the server in tower mode. 39Removing the shipping brackets.40POST screen options.41Installing or deploying an operating system.41Operations. 42Power up the server.423
Powering down the server. 42Unlock the front bezel. 42Open the front bezel. 43Remove the front bezel.43Install the front bezel.44Store the front bezel keys. 44Position the tower server for hardware configuration.45Position the tower server for operation. 46Extend the server from the rack.47Remove the server from the rack.49Slide the server into the rack. 51Remove the access panel.52Install the access panel.53Remove the air baffle. 54Install the air baffle. 55Remove the fan cage.56Install the fan cage.57Remove the half-height media bay blank.58Remove the PCI blank retainer.58Remove the PCI slot blank. 59Remove a PCI board screw. 60Install the PCI blank retainer.60Open the CMA cable clamps . 61Install the shipping hardware. 62Hardware options installation.66Introduction. 66Drive options. 66Drive guidelines.66Drive support information. 66Installing an LFF non-hot-plug drive.67Installing an LFF hot-plug drive.69Installing an SFF hot-plug drive. 70Installing an NVMe SSD.71Power supply options.73Hot-plug power supply calculations.73Power supply warnings and cautions.73Install an AC power supply.73Install a DC power supply. 75Tower-to-rack conversion kit. 81Installing the tower-to-rack conversion kit . 82Prepare the server for rack installation. 82Install the rack rails and server tray. 83Install the server into the rack. 86Install the cable management arm. 88Drive cage options. 914 LFF non-hot-plug drive cage option. 914 LFF hot-plug drive cage option. 948 SFF hot-plug drive cage option. 988 NVMe SSD Express Bay enablement option. 101Media device options. 104Installing a SAS LTO tape drive. 104Installing a USB RDX drive. 109Optical drive cage option. 111Fan cage option.1144
Fan cage implementation. 114Fan population and hot-plug support.115Fan mode behavior.115Fan speed.116Installing the fan cage.116Memory options.120DIMM population information. 120DIMM-processor compatibility.120HPE SmartMemory speed information.120Installing a DIMM.120Processor heatsink assembly option. 122Installing the processor heatsink assembly.122Processor cautions.122Install the processor heatsink assembly. 122Storage controller options. 125Smart Array standup controller option.125Smart Array modular controller option (AROC).128Configuring an HPE Smart Array Gen10 controller.131Energy pack options. 132HPE Smart Storage Battery. 132HPE Smart Storage Hybrid Capacitor.132Installing an energy pack. 133Expansion board options. 135Expansion board thermal requirement. 136GPU installation requirements. 136Installing an expansion board. 136HPE 12G SAS expander card option.139SAS expander card port numbering.140Installing the SAS expander card.140M.2 SSD enablement option. 143Installing an M.2 SATA SSD.143Redundant power supply enablement option.146Installing the redundant power supply enablement option. 146Internal USB device options.151Installing an internal USB device. 152HPE Trusted Platform Module 2.0 Gen10 option.153Overview. 153HPE Trusted Platform Module 2.0 Guidelines.153Installing and enabling the HPE TPM 2.0 Gen10 Kit. 154Cabling. 159Cabling guidelines.159Internal cabling management.160Storage cabling. 161Storage controller cables. 161LFF non-hot-plug drive onboard SATA port cabling . 162LFF hot-plug drive controller cabling.163SFF hot-plug drive controller cabling. 166NVMe SSD data cabling. 170M.2 SATA SSD cabling.170Drive power cabling.171Energy pack cabling.171Storage controller backup power cabling.172Media device cabling. 172SAS LTO tape drive cabling. 1735
USB RDX drive cabling. 174SATA optical drive cabling.175GPU auxiliary power cabling.175Standard power supply cabling (non-hot-plug). 176Front I/O module cabling.176Software and configuration utilities. 177Server mode.177Product QuickSpecs. 177Active Health System Viewer. 177Active Health System. 178HPE iLO 5. 178iLO Federation. 179iLO Service Port. 179iLO RESTful API.180RESTful Interface Tool. 180iLO Amplifier Pack.180Integrated Management Log.180Intelligent Provisioning. 181Intelligent Provisioning operation. 181Management Security. 182Scripting Toolkit for Windows and Linux. 182UEFI System Utilities. 183Selecting the boot mode . 183Secure Boot. 184Launching the Embedded UEFI Shell . 184HPE Smart Storage Administrator. 185HPE MR Storage Administrator. 186HPE InfoSight for servers overview. 186StorCLI.186USB support.187External USB functionality.187Redundant ROM support. 187Safety and security benefits. 187Keeping the system current. 187Updating firmware or system ROM. 187Drivers.190Software and firmware. 190Operating system version support. 190HPE Pointnext Portfolio.190Proactive notifications. 191Troubleshooting. 192NMI functionality.192Troubleshooting resources.192System battery replacement. 193System battery information. 193Removing and replacing the system battery.193Replace the system battery.194Specifications.1956
Environmental specifications. 195Mechanical specifications. 195Power supply specifications.196HPE 500W Low Halogen Non-hot-plug Power Supply. 196HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply.197HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply.198HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply. 199HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply.199HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply. 200HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply.201Safety, warranty, and regulatory information. 203Regulatory information.203Notices for Eurasian Economic Union.203Turkey RoHS material content declaration.204Ukraine RoHS material content declaration. 204Warranty information.204Websites. 205Support and other resources.206Accessing Hewlett Packard Enterprise Support. 206ClearCARE technical support. 206Accessing updates.206Customer self repair.207Remote support. 207Documentation feedback
4 Half-height media bay 1 (for SAS LTO tape drive option or USB RDX drive option)2 5 Half-height media bay 2 (for USB RDX drive option)2 6 Optical drive bay (for slim-type SATA optical drive option)2 7 Serial number/iLO information pull tab on page 9 8 Box 21, 3 Table Continued 8 Component identification
