Transcription
MPLS VPLSImplementationByAntonius Duty SusiloIndonesiaMUM Cambodia2019
Antonius Duty Susilo Email : dutymlg@gmail.com Mikrotik Trainer And Consultant Instructor Cisco Academy, Oracle Academy(Oracle WDP ( Oracle Workspace DevelopmentProgram) Ph.D Student In UTEM Malaysia (UniversitiTeknikal Malaysia Melaka) Guest Lecturer in POLINEMA ( Politeknik NegeriMalang), STIMATA ( STMIK PPKIA PradnyaParamita Malang,STIKI (Sekolah TinggiInformatika dan Komputer Indonesia Malang)MUM Cambodia 2019
What is MPLS MPLS stands for “Multi-Protocol Label Switching”. MPLS is best summarized as a “Layer 2.5 networkingprotocol”. MPLS combines layer 2 switching technology and layer3 routing technology so that it becomes the bestnetwork solution in solving speed, scalability, QOS(Quality of Service), and traffic engineering problems.MUM Cambodia 2019
MPLS LABEL FORMATMUM Cambodia 2019
Label SwitchingMPLS does “label switching” instead:The router applies a “label” based on this information.Future routers use the label to route the trafficAt the final destination router the label is removed.And the packet is delivered via normal IP routing.MUM Cambodia 2019
MPLS Operation At ingress LSR (Label Switch Router) of an MPLS domain, anMPLS header is inserted to a packet before the packet isforwarded At subsequent LSRs The label is used as an index into a forwarding table thatspecifies the next hop and a new label. The old label is replaced with the new label, and thepacket is forwarded to the next hop. Egress LSR strips the label and forwards the packet to finaldestination based on the IP packet headerMUM Cambodia 2019
Classification Of VPNsMUM Cambodia 2019
L2VPN ModelMUM Cambodia 2019
VPLS VPLS defines an architecture allows MPLS networks offer Layer 2multipoint Ethernet Services SP emulates an IEEE Ethernet bridge network (virtual)MUM Cambodia 2019
LDP (Label Distribution Protocol)Label Distribution Protocol ‒ LDP works betweenadjacent/non-adjacent peersLDP sessions are established between peersLDP messages sent in the form of TLVs (Type, Length,Value)MUM Cambodia 2019
Label Space Of LDPLSRs establish one LDP session per label space. Perplatform label space requires only one LDP session,even if there are multiple parallel links between a pairof LSRs.Per-platform label space is announced by setting thelabel space IDMUM Cambodia 2019
Tunnel VPNMUM Cambodia 2019
LABMUM Cambodia 2019
MUM Cambodia 2019
R1IP AddressMUM Cambodia 2019MTU 1508 in eth1, eth2,eth3
R1OSPF InstanceMUM Cambodia 2019OSPF Networks
R1LDP SettingsMUM Cambodia 2019LDP Interface
R2Ether1,2 and 4MUM Cambodia 2019MTU ether1,ether2,ether4
R2OSPF InstanceMUM Cambodia 2019OSPF Networks
R2LDP SettingsMUM Cambodia 2019LDP Interface
R3IP Address InterfaceMUM Cambodia 2019MTU ether 3,ether4
R3OSPF NetworksMUM Cambodia 2019OSPF Instance
R3LDP SettingsMUM Cambodia 2019LDP Interface
R4IP AddressMUM Cambodia 2019MTU ether1 , ether2
VPLS InterfaceMUM Cambodia 2019R4Bridge Interface
R4Port BridgeName ofBridgeMUM Cambodia 2019
OSPF InstanceMUM Cambodia 2019R4OSPF Network
R4LDP SettingsMUM Cambodia 2019MPLS Interface
R5IP AddressMUM Cambodia 2019MTU ether1
Name of BridgeMUM Cambodia 2019R5VPLS-LAN2 Interface
R5BridgeBridge PortsMUM Cambodia 2019
OSPF InstanceMUM Cambodia 2019R5OSPF Network
R5VPLS InterfaceMUM Cambodia 2019LDP Settings
R1R2R3MUM Cambodia 2019
R4R5MUM Cambodia 2019
PingTestFromPC 1MUM Cambodia 2019
Trace Route From PC1 to PC2(Normal and Ether2 (R1) is Down)MUM Cambodia 2019
dutymlg@gmail.com 62 85102077829MUM Cambodia 2019
What is MPLS MPLS stands for "Multi-Protocol Label Switching". MPLS is best summarized as a "Layer 2.5 networking protocol". MPLS combines layer 2 switching technology and layer 3 routing technology so that it becomes the best network solution in solving speed, scalability, QOS (Quality of Service), and traffic engineering .
