Tape And Reel Packaging Standards - ON Semi PDF Free Download

2y ago

84 Views

1 Downloads

1.23 MB

50 Pages

Report/dmca

Download PDF

Transcription

PowerFLEX is a trademark of Texas Instruments Incorporated.POWERMITE is registered trademark of and used under a license from Microsemi Corporation.ON Semiconductor andare trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patentcoverage may be accessed at www.onsemi.com/site/pdf/Patent Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liabilityarising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/orspecifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customerapplication by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are notdesigned, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classificationin a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorizedapplication, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, andexpenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if suchclaim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. Thisliterature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATIONLITERATURE FULFILLMENT:Email Requests to: orderlit@onsemi.comON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORTNorth American Technical Support:Voice Mail: 1 800 282 9855 Toll Free USA/CanadaPhone: 011 421 33 790 2910www.onsemi.com2Europe, Middle East and Africa Technical Support:Phone: 00421 33 790 2910For additional information, please contact your local Sales Representative

ON SemiconductorTape and Reel Packaging StandardsIn Brief . . .PageSurface MountPackaging Standards . . . . . . . . . . . . . . . . . . . . . . . . 4Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . 9Former CMD Tape and Reel Standards . . . . . . . 11Former Fairchild Tape and Reel Standards . . . . 14Product Orientation . . . . . . . . . . . . . . . . . . . . . . . . 21Dimension Standards . . . . . . . . . . . . . . . . . . . . . . 30Thru HoleTO 92 Radial Tape Specifications . . . . . . . . . . . . 36(Fan Fold Box and on Reel)Axial LeadedLead Tape Standards for Axial LeadComponents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Information for UsingSurface Mount Packages . . . . . . . . . . . . . . . . . . . . . 42Humidity Indicator Card . . . . . . . . . . . . . . . . . . . . . . . 47This booklet has been offered to assist those lookingto coordinate packaging specifications with assemblyline requirements. Additionally, dimensional andordering information is supplied for those discretedevices that take the form of axial leaded parts.www.onsemi.com3

Tape and Reel Packaging StandardsEmbossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as theshipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a securecavity for the product when sealed with the “peel back” cover tape. Two Reel Sizes Available (7″ and 13″) Used for Automatic Pick and Place Feed Systems Minimizes Product Handling EIA 481, 1, 2 Series DFN/QFN covers all other Thickness Designators for these packages; i.e. WDFN, UDFN, XDFN, etc. 8 mm Tape: 6 Bump, 9 Bump, 10 Bump, MicroLeadlesst, ChipFET, DFN/QFN packages 3.3x3.3, DSN, Flip Chip, SOD 123, SC 59, SC 70, SC 74, SC 74A, SC 75, SC 82, SC 82AB, SC 88, SC 88A, SC 89, SOD 123, SOD 323,SOD 523, SOD 723, SOD 923, SOT 143, SOT 23, SOT 23L, SOT 323, SOT 353, SOT 553/563, SOT 723,SOT 883, SOT 1123, TSOP 5, TSOP 6, US8, WLCSP 4, WLCSP 5, XDFN2, X3DFN, XLLGA12 mm Tape: DFN/QFN packages 3.3x3.3 and 7x7, FCBGA 16, Micro10, Micro8t, PowerFLEXt,POWERMITEt, QSOP 16, SMA, SMB, SO 8 (SOIC 8), SOT 223, SOT 89, SSOP 8, TSSOP 8, TSSOP 10,TSSOP 14, TSSOP 1616 mm Tape: DFN/QFN packages 7x7, DPAK, FCBGA 16, PLCC 20, QSOP 24, SMC, SO 14 (SOIC 14), SO 16(SOIC 16), SO 16 Wide (SOIC 16W), SOIC EIAJ8, SOIC EIAJ14, SOIC EIAJ16, SOP 16, SSOP 14 Wide,SSOP36 EP, TQFP 32, TSSOP 2024 mm Tape: D2PAK, FCBGA 81, LQFP 52, LQFP 64, PLCC 28, SO 18 Wide (SOIC 18W), SO 20 Wide (SOIC20W), SO 24 Wide (SOIC 24W), SOEIAJ 20, SSOP36 EP (Non standard), TQFP 52, TQFP 64, TSSOP 4832 mm Tape: PLCC 44, PLCC 52, SO 28L Wide (SOIC 28W), SO 28 Wide (SOIC 28W), SO 32 Wide (SOIC 32W),44 mm Tape: PLCC 98, PLCC 84For Leadless Package Pin 1 Orientation, please see Figure 47 (Effective January 2007).Use the standard device title and add the required suffix as listed in the option table on the following page. Note that theindividual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimumlot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity.www.onsemi.com4

Embossed Tape and Reel Ordering InformationTapeWidthmmPitch mm(Dimension P1)(inch)(mm)(in)Devices PerReel and MinOrder Quantity6 Bump(1.489x0.989)84.0 0.1 (0.158 0.004)17873,0009 Bump(1.489x1.489)84.0 0.1 (0.158 0.004)17873,00010 BumpAxial Leaded8ChipFETCPH3Reel SizeFigNoPageNoT1 TMOS922T1 TMOS9224.0 0.1 (0.158 0.004)17873,000T1 DiscreteSee Axial Leaded package standards beginning on page 36922884.0 0.1 (0.158 0.004)4.0 0.1 (0.158 0.004)178178773,0003,000T1 TMOST119152323CPH4CPH5884.0 0.1 (0.158 0.004)4.0 0.1 (0.158 0.004)178178773,0003,000T1T118182323CPH684.0 0.1 (0.158 0.004)17873,000T1, T22625DFN/QFN 1.2x1.6x0.984.0 0.1 (0.157 0.004)330138000N/A4242DFN/QFN 1.4x1.4mm82.0 0.1 (0.079 0.004)1787See Data Sheet42 4727,28WDFN/QFN2.5x4.5mm12124.0 0.1 (0.158 0.004)8.0 0.1 (0.315 0.004)33033013133,0003,0004227DFN/QFN 3.3x3.3mm884.0 0.1 (0.158 0.004)4.0 0.1 (0.158 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DFN/QFN 3.0x3.0mm and 7x7mm12128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DFN/QFN 7x7mm121216.0 0.1 (0.630 0.004)16.0 0.1 (0.630 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DFN/QFN 9x9mm161612.0 0.1 (0.471 0.004)12.0 0.1 (0.471 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DFN/QFN10x10mm161616.0 0.1 (0.630 0.004)16.0 0.1 (0.630 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DFN/QFN10.5x10.5mm161616.0 0.1 (0.630 0.004)16.0 0.1 (0.630 0.004)178330713See Data SheetSee Data SheetSee Data SheetSee Data Sheet42 4727,28DO 41795.08 0.508356145,000N/A413 Lead2416.0 0.1 (0.630 0.004)33013800RL DiscreteR4 AnalogT4 Discrete121D2PAK 5 Lead2416.0 0.1 (0.630 0.004)33013800R4 AnalogT4 Discrete121D2PAK 7 Lead2416.0 0.1 (0.630 0.004)33013750R7 Analog121DPAK1612.0 0.1 (0.471 0.004)330131,800421DPAK168.0 0.1 (0.315 0.004)330132,500RL DiscreteT4, T5 DiscreteRK, T5 Analog2, 321DPAK (TP FA)168.0 0.1 (0.315 0.004)1787700T4321DPAK (SingleGauge)168.0 0.1 (0.315 0.004)330133,000T4321DSN82.0 0.05 (0.079 0.002)17875,000T5 Discrete822FCBGA 16FCBGA 4912168.0 0.1 (0.315 0.004)12.0 0.1 (0.471 0.004)33033013132,500/5002,000/500R2 Clock & Data MgmtR2 Clock & Data Mgmt41412727FCBGA 81Flip Chip24812.0 0.1 (0.471 0.004)4.0 0.1 (0.157 0.004)3301781371,500/5003,000R2 Clock & Data MgmtT1 Discrete41N/A27N/ALFBGA 5x5VFBGA 5x512128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)330330131350005000N/AN/A41412727LGA17 5.97x3.43128.0 0.1 (0.315 0.004)1787250XTP4227LFPAK 5x6LQFP 4812168.0 0.1 (0.315 0.004)12.0 0.1 (0.471 0.004)33033013133,0002,000TWR48 Analog38102622LQFP 32LQFP 52162412.0 0.1 (0.471 0.004)16.0 0.1 (0.630 0.004)33033013131800 or 20001,500R2 Clock & Data MgmtR2 Clock & Data Mgmt10102222LQFP 642416.0 0.1 (0.630 0.004)330131,500R2 Clock & Data Mgmt1022PackageD2PAKwww.onsemi.com5Tape and Reel SuffixVariousTWTW

Embossed Tape and Reel Ordering InformationTapeWidthmmPitch mm(Dimension P1)(inch)(mm)(in)Devices PerReel and MinOrder QuantityMicro10Micro8 12128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)33033013134,0002,500Micro8PLCC 2012168.0 0.1 (0.315 0.004)12.0 0.1 (0.471 0.004)3303301313PLCC 282416.0 0.1 (0.630 0.004)33013PackageReel SizeFigNoPageNoR2 Analog, DiscreteR2, T Analog6621214,0001,000R2 Analog, DiscreteR2 Clock & Data Mgmt6112122500R2 Clock & Data Mgmt11221122Tape and Reel SuffixPLCC 443224.0 0.1 (0.942 0.004)33013500R2 Clock & DataMgmt, AnalogPLCC 443224.0 0.1 (0.942 0.004)33013500R44 Analog11221122PLCC 523224.0 0.1 (0.942 0.004)33013500R2 Clock & DataMgmt, AnalogPLCC 684432.0 0.1 (1.256 0.004)33013250R2 Clock & DataMgmt, Analog1122PLCC 844436.0 0.1 (1.418 0.004)33013250R2 Clock & DataMgmt, Analog1122PowerFLEXtPOWERMITE POWERMITE1224.0 0.1 (0.942 0.004)330132,000R7 Analog12112124.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307133,00012,000T1, TR7 DiscreteT3, TR13 Discrete24242424SC 59SC 59884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307133,00010,000T1, T2 DiscreteT3 Discrete15152323SC 70SC 70884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307133,00010,000T1 DiscreteT3 Discrete15152323SC 70FL84.0 0.1 (0.157 0.004)17873,000T11523SC 70 5 LeadSC 70 6 Lead884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)178178773,0003,000T1 AnalogT1 Analog17262325SC 70 6 LeadSC 74884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)33017813710,0003,000T3 AnalogT1 Discrete26162523SC 74ASC 75884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)178178773,0003,000T1 DiscreteT1 Discrete14152323SC 8284.0 0.1 (0.157 0.004)17873,000TR Analog1223SC 82ABSC 82FL884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)178178773,0003,000T1 Analog, DiscreteT112132323SC 8884.0 0.1 (0.157 0.004)3301310,0002625SC 8884.0 0.1 (0.157 0.004)17873,000T3 DiscreteT1, T2 DiscreteT1 Analog2625SC 88FL84.0 0.1 (0.157 0.004)17873,000T12625SC 88ASC 88A884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307133,00010,000T1, T2 DiscreteT3, T4 Discrete17172323SC 88AFL84.0 0.1 (0.157 0.004)17873,000T11723SC 89SC 89884.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307133,00010,000T1 DiscreteT3 Discrete15152323SIP16 3.12x4.57SIP19 5.25x2.9012128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)17817877250250T45452727SIP21 3.10x5.08SIP25 5.59x3.1812128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)17817877250250TT45452727SIP25 5.72x3.18128.0 0.1 (0.315 0.004)1787250T4527SIP32 3.68x6.35SIP33 3.10x4.7512128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)17817877250250T45452727SIP49 3.94x7.39SIP51 8x616168.0 0.1 (0.315 0.004)12.0 0.1 (0.471 0.004)1785607222503,00045462727SIP57 6.80x3.94SIP59 4.14x3.1816128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)1781787725025045452727www.onsemi.com6N/A

Embossed Tape and Reel Ordering InformationTapeWidthmmPitch mm(Dimension P1)(inch)(mm)(in)Devices PerReel and MinOrder QuantitySMASMA12124.0 0.1 (0.157 0.004)4.0 0.1 (0.157 0.004)1783307131,5005,000SMBSMB12128.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)178330713SMC168.0 0.1 (0.315 0.004)330SO 8 (SOIC 8)128.0 0.1 (0.315 0.004)330SO 8 (SOIC 8)128.0 0.1 (0.315 0.004)SO 8 (SOIC 8)12SO 10 (SOIC 10)SO 14 (SOIC 14)1216SO 14 (SOIC 14)Reel SizeFigNoPageNoT1 DiscreteT3 Discrete252524241,0002,500T1 DiscreteT3 Discrete25252424132,500T3 Discrete2524132,500 / 3,000621330132,500 / 3,000R8 Analog E.G.*R2 TMOS, Analog,Clock & Data Mgmt6218.0 0.1 (0.315 0.004)330132,500 / 3,000T3 EEPROM6218.0 0.1 (0.315 0.004)8.0 0.1 (0.315 0.004)33033013132,5003,000R2 AnalogR14 Analog E.G.*662121168.0 0.1 (0.315 0.004)330133,000R2 Clock & DataMgmt, Logic, Analog621SO 16 (SOIC 16)168.0 0.1 (0.315 0.004)330133,000R2 Clock & DataMgmt, Logic, Analog621SO 16 (SOIC 16)SO 16 Wide(SOIC 16W)168.0 0.1 (0.315 0.004)330133,000621168.0 0.1 (0.315 0.004)330131,500R16 Analog E.G.*R2 Clock & DataMgmt, Logic, Analog621SO 16 Wide(SOIC 16W)168.0 0.1 (0.315 0.004)330131,500R16 Analog E.G.*621SO 18 Wide(SOIC 18W)2412.0 0.1 (0.471 0.004)330131,000R2 Clock & Data

EIA 481, 1, 2 Series DFN . Use the standard device title and add the required suffix as listed in the option table on the following page. Note that the individual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the .