WIXLIB

RSA3000E SeriesReal-time Spectrum AnalyzerUltra-Real technologyFrequency: up to 3 GHzDisplayed average noise level (DANL): -161 dBm (typical)Phase noise: -102 dBc/Hz (typical)Level measurement uncertainty: 1.0 dB3 GHz tracking generatorMin. RBW 1 HzUp to 10 MHz real-time analysis bandwidthMultiple measurement modesVarious advanced measurement functionsEMI measurement application (option)Multiple trigger modes and trigger masksDensity, spectrogram, and other display modesPC software options10.1'' capacitive multi-touch screen; supporting touch gesturesUSB, LAN, HDMI and other communication and display interfaces

RSA3000E Series Real-time Spectrum AnalyzerBuilt-in Linux operating system reliable and stable interfaceBuilt-in quad-coreprocessorhigh processing speed10.1-inch capacitivemulti-touch screensupporting touchgesturesSupport keyboard andmouse operationTG: 100kHz to 1.5/3.0GHz-40 dBm to 0 dBmRF: 9 kHz to 1.5/3.0GHzProduct Dimensions: Width Height Depth 410 mm 224 mm 135 mmBased on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in theanalysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram,Density, and PVT. Besides, FMT function is also available.The Ultra-Real technology has the following features:Seamless analysisI/Q data acquisition in the analysis bandwidth Seamless spectrum analysis SeamlessFMT Frequencymask trigger (FMT) to trigger the measurement by sporadic ortransient events in the spectrumComposite displaysfor gap-free display of the spectrum Density for you to visualize how frequently signals occur Spectrogram2 RIGOL

SpecificationsSpecifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 to 50 temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurementuncertainty.Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25 ). Thisdata is not warranted and does not include the measurement uncertainty.Nominal: the expected mean or average performance or a designed attribute (such as the 50 Ω connector). This data is not warranted and ismeasured at room temperature (approximately 25 ).Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude driftvariation with time. This data is not warranted and is measured at room temperature (approximately 25 ).NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specifications (except thetracking generator specifications) listed in this manual are those when the tracking generator is off.Measurement ModeMeasurement ModeGeneral-Purpose Spectrum Analyzer (GPSA)Real-time Spectrum Analyzer (RTSA)EMI Measurement Application (EMI) Option RSA3000E-EMIASK/FSK Demodulation Software Option RSA3000E-ASK/FSKAll Measurement ModesFrequency RangeModel RSA3015E/RSA3015E-TG9 kHz to 1.5 GHzModel RSA3030E/RSA3030E-TG9 kHz to 3 GHzInternal Reference FrequencyReference Frequency10 MHzAccuracyInitial CalibrationAccuracyTemperatureStabilityAging Rate [(time since last calibration aging rate) temperature stability calibration accuracy]Standard 1 ppmOption OCXO-C08 0.1 ppm0 to 50 , with the reference 25 Standard 0.5 ppmOption OCXO-C08 0.005 ppmStandard 1 ppm/yearOption OCXO-C08 0.03 ppm/year3 RIGOL

GPSA ModeFrequencyFrequency Readout AccuracyMarker Frequency Resolutionspan/(number of sweep points - 1)Marker Frequency Uncertainty (marker frequency readout reference frequency accuracy 1% span 10% resolution bandwidth marker frequency resolution)Frequency CounterResolution1 HzUncertainty (marker frequency readout reference frequency accuracy counter resolution)Frequency SpanRange0 Hz, 10 Hz to maximum frequencyResolution2 HzUncertainty span/(number of sweep points - 1)SSB Phase Noise20 to 30 ，fc 500 MHzCarrier Offset1 kHz -90 dBc/Hz (typical)10 kHz -100 dBc/Hz, -102 dBc/Hz (typical)100 kHz -100 dBc/Hz, -102 dBc/Hz (typical)1 MHz -110 dBc/Hz, -112 dBc/Hz (typical)Residual FM20 to 30 , RBW VBW 1 kHzResidual FM 10 Hz (nominal)BandwidthSet "Sweep Time Rule" to "Accy"Resolution Bandwidth (-3 dB)[1]1 Hz to 3 MHz, in 1-3-10 sequenceRBW Accuracy 5% (nominal)Resolution Filter Shape Factor (60 dB: 3 dB) 5 (nominal)Video Bandwidth (-3 dB)1 Hz to 10 MHz, in 1-3-10 sequenceResolution Bandwidth (-6 dB)(Option RSA3000E-EMC)200 Hz, 9 kHz, 120 kHz, 1 MHzNote: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 3 MHz.4 RIGOL

AmplitudeMeasurement RangeRangefc 10 MHzDANL to 30 dBmMaximum Safe Input Level[1]DC VoltageCW RF Power50 V 30 dBm, attenuation 40 dB, preamp off.-10 dBm, attenuation 20 dB, preamp on.Maximum Damage LevelCW RF Power 33 dBm (2 W)Displayed Average Noise Level (DANL)attenuation 0 dB, sample detector, trace averages 50, tracking generator off,normalized to 1 Hz, 20 to 30 , input impedance 50 Ω.Preamp offPreamp on9 kHz to 100 kHz -120 dBm (typical)100 kHz to 20 MHz -135 dBm, -140 dBm (typical)20 MHz to 1.5 GHz -138 dBm, -141 dBm (typical)1.5 GHz to 3.0 GHz -136 dBm, -141 dBm (typical)100 kHz to 20 MHz -152 dBm, -160 dBm (typical)20 MHz to 1.5 GHz -158 dBm, -161 dBm (typical)1.5 GHz to 3.0 GHz -156 dBm, -161 dBm (typical)Note: [1] When fc 10 MHz, the maximum safe input level is decreased.5 RIGOL

Level DisplayLogarithmic Scale1 dB to 200 dBLinear Scale0 to reference levelNumber of Display Points801Number of Traces6Trace Detectornormal, pos-peak, neg-peak, sample, RMS average, voltage average, andquasi-peak (Option RSA3000E-EMC)Trace Functionclear write, max hold, min hold, average, view, blankScale UnitdBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, WFrequency Responseattenuation 10 dB, relative to 50 MHz, 20 to 30 Preamp off100 kHz to 3.0 GHzPreamp on100 kHz to 3.0 GHz 0.7 dB, 0.5 dB (typical)attenuation 0 dB, relative to 50 MHz, 20 to 30 6 RIGOL 1.0 dB, 0.5 dB (typical)

Input Attenuation Switching UncertaintySetting RangeSwitching Uncertainty0 dB to 50 dB, in 1 dB stepfc 50 MHz, relative to 10 dB, preamp off, 20 to 30 0.3 dBAbsolute Amplitude Accuracyfc 50 MHz, peak detector, preamp off, attenuation 10 dB, input signal level -10 dBm, 20 to30 Uncertainty 0.3 dBReference LevelRangeLogarithmic Scale-170 dBm to 30 dBm, in 0.01 dB stepLinear Scale707 pV to 7.07 V, 0.11% (0.01 dB) resolutionRBW SwitchingSet "Sweep Time Rule" to "Accy", relative to 30 kHz RBWUncertainty1 Hz to 1 MHz 0.1 dB3 MHz 0.3 dBRSA3015E/RSA3015E-TG100 kHz to 1.5 GHzRSA3030E/RSA3030E-TG100 kHz to 3 GHzPreamp (Option RSA3000E-PA)Frequency RangeGain20 dB (nominal)Level Measurement Uncertainty95% confidence level, S/N 20 dB, RBW VBW 1 kHz, preamp off, attenuation 10 dB, -50dBm input level 0 dBm, fc 10 MHz, 20 to 30 Level Measurement Uncertainty 1.0 dB (nominal)7 RIGOL

RF Input VSWRattenuation 10 dB, preamp offVSWR300 kHz to 3.0 GHz 1.6 (nominal)DistortionSecond Harmonic Intercept (SHI)Third-order Intercept (TOI)fc 50 MHz, input signal level -20 dBm, attenuation 0 dB, preamp off. 45 dBmfc 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation 0 dB,preamp off. 10 dBm, 15 dBm (typical)1 dB Gain Compression (P1dB)[1]fc 50 MHz, attenuation 0 dB, preamp off0 dBm (norminal)Spurious ResponseResidual Responseinput terminated with a 50 Ω load, attenuation 0 dB, 20 to 30 -90 dBm, -100 dBm (typical)Intermediate Frequency -60 dBcSystem-related Sidebandreferenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of firstLO, referenced to harmonic of first LO -60 dBcInput-related Spuriousmixer level -30 dBm -60 dBcNote: [1] The frequency interval of the two-tone signals should be greater than 10 MHz.8 RIGOL

SweepSweepSweep TimeSweep TimeUncertaintyspan 10 Hz1 ms to 4,000 szero span1 μs to 6,000 sspan 10 Hz, RBW 1 kHz5% (nominal)zero span (sweep time 1 ms) 5% (nominal)Sweep Modecontinue, singleTriggerTriggerTrigger SourceTrigger Delayfree run, external 1, external 2, videospan 10 Hz0 to 500 mszero span0 to 500 msTracking GeneratorTracking Generator OutputFrequency RangeRSA3015E-TG100 kHz to 1.5 GHzRSA3030E-TG100 kHz to 3.0 GHzOutput Level Range-40 dBm to 0 dBmOutput Level Resolution1 dBOutput FlatnessRelative to 50 MHz 3 dB (nominal)Function SupportedFunction SupportedVSWR measurement9 RIGOL

RTSA ModeReal-time Analysis Bandwidth10 MHzMin. Signal Duration for 100% POI atthe Full-Scale Accuracymaximum span, default Kaiser WindowTrace Detectorpos-peak, neg-peak, sample, averageNumber of Traces6Window TypeHanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian9.3 μsprovides 6 RBWs for each window, except the Rectangular;for Kaiser windowResolution BandwidthSpanMin. bandwidthMax. bandwidth10 MHz25.1 kHz804 kHz1 MHz2.51 kHz80.4 kHz100 kHz251 Hz8.04 kHzMax. Sample Rate12.8 Msa/sFFT Rate146,484/s (norminal)Number of Markers8Amplitude Resolution0.01 dBFrequency Point801Acquisition TimeMax. sample rate 32 msMin. Signal Duration for 100% POI at Different RBWsDuration Time (μs)SpanRBW1RBW2RBW3RBW4RBW5RBW610 MHz86.846.826.816.811.89.301 MHz80740720710756.331.3AmplitudeAmplitude Flatness 0.5 dB[1] (nominal)SFDR -50 dBc/Hz (typical)DensityProbability Range0 to 100% (with a step of 0.1%)Min. Span5 kHzPersistence Duration32 ms to 10 sSpectrogramHistory Depth8,192Dynamic Range Covered by Bitmap200 dBColorPVTMin. Acquisition Time187.917 μsMax. Acquisition Time40 sTriggerTrigger Sourcefree run, external 1, external 2, power(time), FMTFMTTrigger Diagramdensity, spectrogram, normal, PVTTrigger Resolution0.5 dB (nominal)Trigger Criteriaenter, leave, inside, outside, enter-leave, leave-enterNote:[1] Only applicable to the Normal measurement.10 RIGOL

VSA Mode (Option RSA3000E-ASK/FSK)Capture OversamplingCapture OversamplingCapture LengthCapture Oversampling 4Capture Oversampling 8Capture Oversampling 16Sample RateMaximum Sample RateSymbol Rate4, 8, 16Maximum 4096Maximum 2048Maximum 102412.8 MHzdepends on capture oversampling sample rate/capture oversampling, 1 kHzSymbol RateUsable I/Q BandwidthUsable I/Q BandwidthTrigger ModeTrigger ModeModulation FormatFSKASKFilter TypeMeasurement Filter TypeReference Filter TypeMeasurement Uncertaintysymbol rate capture oversampling/1.28free run, external1, external2, power (time), and FMT2FSK, 4FSK, and 8FSK2ASK and 4ASKNo Filter, RRC, Gaussian, Rectangular, and User DefinedRaised Cosine, RRC, Gaussian, Rectangular, and User DefinedSpecifications apply under the following conditions:temperature from 20 C to 30 Csignal level –25 dBmproperly adjusted reference leveloffset between device’s center frequency and signal’s center frequency smaller than 5 % ofsymbol rateRandom data sequenceCapture oversampling is set to 4.Residual Error for FSKTest SignalSymbol Rate100 kHz500 kHzThe reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rollofffactor 0.22. The FSK reference deviation is a quarter of the symbol rate. The result length is 150symbols. The center frequency is 1 GHz.Residual Frequency Error RMS 2.8% (nominal) 2.8% (nominal)EMI Mode (Option RSA3000E-EMI)EMI Resolution BandwidthResolution Bandwidth (-3 dB)Resolution Bandwidth (-6 dB)EMI DetectorDetectorEMI Key FeatureKey Feature100 Hz to 3 MHz, in 1-3-10 sequence200 Hz, 9 kHz, 120 kHz and 1 MHzpos-peak, neg-peak, average, quasi-peak, CISPR average, RMS averageCISPR 16-1-1 detectorsCISPR 16-1-1 bandwidthslog and linear displaysignal tablescan tablesimultaneous detectorsautomatic limit testingmeasure at markerdelta to limitstep and swept scansreport generation11 RIGOL