Transcription
PRODUCT SPECIFICATIONSR1 – SERIES REVERSE OSMOSIS SYSTEMSAXEON R1– Series Reverse Osmosis Systemsare designed for overall superior performance, highrecovery rates, minimal energy consumption andoffer great savings with low maintenance and lowoperation costs.R1– Series Reverse Osmosis Systems featurea new, innovative design. These systems featureonly the highest quality components, including aprogrammable computer controller with many builtin standard features, a stainless steel booster pumpfor high performance and corrosion resistance, ultralow energy membranes and fiberglass membranehousings for enhanced performance and durability.R1– Series Reverse Osmosis Systems have beenengineered for capacities ranging from 1,800-21,600gallons per day.R1–12140Reverse Osmosis SystemBENEFITSAXEON Naming Matrix Fully Equipped and Customizable Skid Mounted Decreased Size of Dimensional Footprintfrom Standard Reverse Osmosis Systems Components Easily Accessible Pre-Plumbed, Wired and Assembled Individually Tested and Preserved Low Operation and Maintenance Costs Easy Maintenance and Servicing 20% Less Energy Use than StandardReverse Osmosis Systems 1-Year Limited WarrantyR1R –Series ModelR1Tap Water ModelHousing Quantity Designation11 Vessel22 Vessels33 Vessels44 Vessels55 Vessels66 Vessels88 Vessels1010 Vessels1212 VesselsMembrane Quantity Per Housing11 Membrane4.0 Inch Membrane Diameter6140
FEATURESOPTIONS AND UPGRADES S –150 Computer Controller S –150 Expander Board LCD Backlit Display S –150 Dual TDS Board and Sensor Pre-Treatment Lockout Filmtec LCLE Membrane Elements Tank Level Input AXEON SS – Series Membrane Elements Low Pressure Monitoring and Alarm AXEON NF3 – Series Membrane Elements Hour Meter AXEON NF4 – Series Membrane Elements TDS Monitoring AXEON HR3 – Series Membrane Elements Feed Flush Hanna BL 981411 pH Controller AXEON Permeate and ConcentrateFlow Meters AXEON Concentrate Recycle Flow Meter Permeate Flush Permeate Divert Permeate Sample Valves AXEON Pre-Filter 0-100 psi PanelMounted Glycerin Filled Gauges Pump Pressure Relief Valve AXEON Pump Discharge and Concentrate0 - 300 psi Panel Mounted GlycerinFilled Gauges High Pressure Tank Switch Blending Valve Wooden Crate AXEON 5-Micron Sediment Pre-Filter AXEON HF5 – Series Ultra Low EnergyMembrane Elements AXEON FRP– Series MembraneHousings (300 psi) AXEON by Pentair 20" Big GreyCartridge Housings Goulds Multi-Stage Stainless SteelBooster Pump ASCO Composite Feed Solenoid Valve Feed Low Pressure Switch White Powder Coated Aluminum Frame Dual Chemical Pump OutletsR1–12140Reverse Osmosis System
Notes:1. All dimensions aregiven in inches.2. R1 –12140 AXEONmodel shown.Notes:1. Two check valves in parallel for models R1– 6140, R1– 8140, R1 –10140 and R1–12140.ARRAY SPECIFICATIONSVessel ArrayVessel SizeVessel QuantityMembrane SizeR1–1140Model1404014040Membrane Quantity1R1– 21401:14040240402R1– 31401:1:14040340403R1– 41401:1:1:14040440404R1– 51401:1:1:1:14040540405R1– 61402:2:24040640406R1– 81402:2:2:24040840408R1– 101402:2:2:2:2404010404010R1– 121402:2:2:2:2:2404012404012
1324674Pump PressureDisplays pressure after the RO Pump and beforethe first membrane. Max pressure is 200 psi.5If differential pressure on these two gaugesshows above 15 psi per each membrane housing(ex. 3 membranes in series would add up to 45 psi) then membrane likely is fouled. Clean orreplace membranes.6Concentrate PressureDisplays pressure after the last membrane.7S150 ControllerMonitors functions from TDS, temperature, rejection(with dual TDS Option) RO pump, pressures andsolenoid valve. Voltage standard is 220 1 pH andoptional 3 pH, voltage 380, 460, 575 VAC. Thiscontroller is UL/CUL certified.8PermeateShows the amount of water being produced in GPM(Gallons Per Minute), also known as Product Water.9Concentrate/Concentrate ValveMeasures flows of waste water using an integratedneedle valve to adjust pressure and flows.10Concentrate Recycle/Concentrate Recycle ValveMeasures flows of recycled water from the wastewater side for higher recovery using an integratedneedle valve to adjust flows. This is used inconjunction with concentrate water.11Solenoid ValveThe ASCO brand solenoid is a composite valve thatlets water in or stops based on RO demand. The sizeis 1" FNPT (female pipe thread). ALWAYS have thesame size or larger pipe.12Sediment FilterThis uses a 4.5" x 20" filter that traps particulatesas Iow as 5 microns using a 5 MIC filter.5891011121Filter InMeasures feed pressure which needs aminimum 45 psi. Lower pressure cancreate low pressure faults.2Differential pressure is measured based onthe Filter In and Filter Out and if it exceeds15 psi then the filter must be replaced.3Filter OutMeasures pressure after the filter. Thispressure must be above 40 psi. Lowpressure switch will shut off unit when itgoes below 15 psi.
13RO PumpThis produces the required pressure for theRO system. The R1 has two sizes: 1.5 hp forthe R1–1140 to R1– 4140 and 3 hp for theR1–5140 to R1–12140.14Injection PortThis is for the injector used in a chemicalinjection system. This injects a chemicalto help prevent fouling of the membrane.S200 is the chemical used to sequesterhardness so it won't plug the membranes.Up to 300 GPG.15Pump Throttle ValveThis controls the flow and pressure fromthe pump. NEVER fully close this or damagewill occur from heat and dead heading.16Fiberglass Pressure ValveStores membranes (HF5 – 4040) thatproduce clean water.17Injection PowerPower source only for the chemicalinjection pump. It is not to be used foranything else or overloading can occur.1314151617RWS – SeriesPackaged Water SystemsAXEON Reverse Osmosis Packaged Water Systemsinclude configurations that produce 2,000 to 21,000gallons of pure water per day. These systems arrive fullyassembled, tested and ready for plug-in-play installation.
SPECIFICATIONSMODELSR1 –1140R1– 2140R1– 3140R1– 4140R1– 5140R1– 6140R1– 8140R1–10140R1–12140Single PassSingle PassSingle PassSingle PassSingle PassSingle PassSingle PassSingle PassSingle 945566368566368711,800 /6,8133,600 /13,6275,400 /20,4417,200 /27,2549,000 /34,06810,800 /40,88214,400 /54,50918,000 /68,13721,600 /81,764Permeate Flow (gpm / lpm)1.25 / 4.732.50 / 9.463.75 / 14.195.00 / 18.936.25 / 23.667.50 / 28.3910.00 / 37.8512.50 / 47.3215.00 / 56.78Minimum Concentrate Flow(gpm / lpm)3 / 11.353 / 11.353 / 11.353 / 11.353 / 11.356 / 22.716 / 22.716 / 22.716 / 22.71Concentrate RecycleFlow Rate (gpm / lpm)Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93Up to5 / 18.93DesignConfigurationFeedwater TDS max (ppm)AStandard Recovery %Rejection and Flow RatesBPermeate Flow Rate(gpd / lpd)Connections1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPTPermeate Connection (in)Feed Connection (in)3/4 FNPT3/4 FNPT3/4 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPTConcentrate Connection (in)3/4 FNPT3/4 FNPT3/4 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPT1 FNPTMembranesMembranes Per Vessel111111111Membrane Quantity12345681012Membrane Size404040404040404040404040404040404040Nominal TDS Rejection %98.598.598.598.598.598.598.598.598.5Vessel 22:2:2:2:2:2Vessel 034503450345034503450220V, 60Hz,1PH, 8.8AC220V, 60Hz,1PH, 8.8AC220V, 60Hz,1PH, 8.8AC220V, 60Hz,1PH, 8.8AC220V, 60Hz,1PH, 16AC220V, 60Hz,1PH, 16AC220V, 60Hz,1PH, 16AC220V, 60Hz,1PH, 16AC220V, 60Hz,1PH, 16ACApproximate Dimensions DL x W x H (in / cm)26 x 26 x 60 /73.66 x 66.04x 154.9426 x 26 x 60 /73.66 x 66.04x 154.9426 x 26 x 60 /73.66 x 66.04x 154.9432 x 26 x 60 /78.74 x 66.04x 154.9432 x 26 x 60 /78.74 x 66.04x 154.9432 x 26 x 60 /78.74 x 66.04x 154.9432 x 50 x 60 /83.82 x 127x 154.9432 x 50 x 60 /83.82 x 127x 154.9432 x 50 x 60 /83.82 x 127x 154.94Approximate Weight (lbs / kg)250 / 113.40290 / 131.54330 / 149.68370 / 167.83430 / 195.05470 / 213.19510 / 231.33550 / 249.48590 / 267.62VesselsPumpsPump TypeMotor HPRPM @ 60HzSystem ElectricalStandard Voltage Amp DrawSystem DimensionsTest Parameters: 550 TDS Filtered (5–Micron), Dechlorinated, Municipal Feedwater, 65 psi / 4.50 bar Feed Pressure, 80 psi / 5.5 bar Operating Pressure, 77 F / 25 C, Recovery as stated, 7.0 pH. Datataken after 60 minutes of operation.A. Low temperatures and feedwater quality, such as high TDS levels will significantly affect the systems production capabilities and performance. Computer projections must be run for individualapplications which do not meet or exceed minimum and maximum operating limits for such conditions.B. Product flow and maximum recovery rates are based on feedwater conditions as stated above. Do not exceed recommended permeate flow.C. Varies with motor manufacturer.D. Does not include operating space requirements.OPERATING LIMITS EMaximum Feed Temperature ( F / C)85 / 29Maximum Free Chlorine (ppm)Minimum Feed Temperature ( F / C)40 / 4Maximum TDS (ppm)Maximum Ambient Temperature ( F / C)120 / 49Minimum Ambient Temperature ( F / C)Maximum Feed Pressure (psi / bar)Minimum Feed Pressure (psi / bar)Maximum Pressure (psi / bar)Maximum Feed Silt Density Index (SDI)02,000Maximum Hardness (gpg)040 / 4Maximum pH (continuous)1185 / 6Minimum pH (continuous)245 / 3Maximum pH (cleaning 30 minutes)13200 / 14Minimum pH (cleaning 30 minutes)1Maximum Turbidity NTU1 3E. System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.800-320-4074MKT – 568 – F07/09/21AXEONwater.com 2021 AXEON Water Technologies
Reverse Osmosis Systems 1-Year Limited Warranty R1-12140 Reverse Osmosis System AXEON R1-Series Reverse Osmosis Systems are designed for overall superior performance, high recovery rates, minimal energy consumption and offer great savings with low maintenance and low operation costs. R1-Series Reverse Osmosis Systems feature
