HomeWorks QSX Processor SPEC (3691127)

Transcription

product specifications02.18.213691127cCCICOMCOMV L20,28 in7 mmHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657MUXMUXV L2: 24 V- 1.0 ACOMMUXMUXV L1: 24 V- 1.0 ACOMThe HomeWorks QSX processor 1 provides control andcommunication to HomeWorks system components.The Ethernet links allow communication to theHomeWorks designer software, integration withthird-party systems and communication betweenmultiple processors. HomeWorks QSX processors maybe connected using either an Ethernet hub /switch orrouter, or by using Ethernet directly from a PC to theprocessor(s). Clear Connect - Type X Gateways cannotbe wired directly to the Ethernet port on a HomeWorksQSX processor. See page 5 for details. All processorson a project must be connected to a single network.The HomeWorks designer software and all integrationequipment must be connected to the same networkas the processors. The HomeWorks QSX processoris required when using the Clear Connect - Type XGateway for control of residential Ketra light sources.See Lutron Spec Submittal 3691128 atwww.lutron.com for the complete details onClear Connect - Type X Gateway.The processor is powered from the QSPS-DH-1-75-Hpower supply. Refer to the HomeWorks designersoftware to determine link power requirements.The QSX processor can be installed in a HQ-LV21,L-LV21, L-LV14, or PDx control panel.L1HomeWorks QSX Processor4,4 in-lb0,5 N mLED DEL Processor CapabilitiesEach QSX processor has 1 or 2 links (depending onmodel number) that can be individually configured asone of two types: HomeWorks QS wired device link99 devices / 512 zones HomeWorks Clear Connect - Type A99 devices / 100 zonesModel NumbersHQP7-1HomeWorks QSX 1-link processor 1HQP7-2HomeWorks QSX 2-link processor 1HQP7-MDU-1 HomeWorks QSX 1-link MDU processor 1,2HQP7-MDU-2 HomeWorks QSX 2-link MDU processor 1,21 The HomeWorks QSX processor requires Lutron Designer software 16.x or greaterto operate.2 Only available for multi-dwelling unit projects. Contact your local dealer or Lutronrepresentative for more information.www.lutron.com/support1Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications3691127c02.18.21HomeWorks QSX ProcessorSpecificationsModel NumberHQP7-1; HQP7-2; HQP7-MDU-1; HQP7-MDU-2PowerProcessor (P): 24–36 V- 250 mALinks (L1 / L2): 24–36 V- 2 A per linkTypical PowerConsumption4.2 W; 8 Power Draw Units (PDUs)Test conditions: Two Ethernet links connected, both device links in useRegulatory ApprovalscULus, NOM, CEEnvironmentIndoor use only. 32 F to 104 F (0 C to 40 C), 0% to 90% humidity,non-condensingHeat Generated15 BTU/hr — typical(24 BTU/hr with 2 links at 2 A each output)Cooling MethodPassive CoolingPower Failure MemorySystem data stored in non-volatile memory. Timeclock retention for 10 yearsInternal Timeclock 1 minute per yearMiswire ProtectionAll terminal block inputs are over-voltage and miswire protected against wirereversals and shortsLow-Voltage LinkWire TypeTwo pair — one pair 18 AWG (0.75 mm 2 ), one pair 18 to 22 AWG(0.34 to 0.75 mm 2 ) twisted shielded — IEC PELV / NEC Class 2 cableLow-Voltage PowerWire Type18 AWG (0.75 mm 2 )CommunicationsEthernet, RS485 (QS, RF)Link CapacitiesHomeWorks QS Wired Device LinkHomeWorks QS Wired Device (MDU models)HomeWorks Clear Connect - Type A LinkESD ProtectionMeets or exceeds the IEC 61000-4-2 standardSurge ProtectionMeets or exceeds ANSI/IEEE C62.41 standardMountingMounts in HQ-LV21, L-LV14, L-LV21, or PDx- control panelDimensionsWith terminal blocks: 4.25 in (108 mm) x 3.94 in (100 mm)Without terminal blocks: 4.25 in (108 mm) x 3.54 in (90 mm)Connections4-pin removable terminal blocks. 1 for HQP7-1, 2 for HQP7-2.One 4-pin removable terminal block* for Power Input.Two RJ45 standard Ethernet connections.*Each terminal will accept up to two 18 AWG (0.75 mm 2 ) ary/Warranty.pdfwww.lutron.com/support299 devices/512 zones50 devices/50 zones99 devices/100 zonesCustomer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications3691127c02.18.21HomeWorks QSX ProcessorHomeWorks QSX System Security StatementLutron takes cybersecurity very seriously. We actively monitor the threat landscape and take aproactive approach to security and privacy, continuously working to update and enhance our systemsand processes.At Lutron, we call our approach to cybersecurity “Secure Lifecycle”, and we would like to present thefollowing steps we take to protect your security and privacy: Security by Design. When building a new system, Lutron utilizes a dedicated security team toensure best practices are implemented. Security is built in. It is not an afterthought or an add-on. Third-Party Validation. Security is complicated. Lutron has a dedicated team of internalexperts, but we also leverage external experts to double-check our work, and to makesecurity recommendations. Continuous Monitoring and Improvements. Security is a constantly moving target. Lutron usesa dedicated security team to continuously monitor for potential threats and, when needed, send outsecurity patches to update installed systems. Ongoing Support. Lutron has the resources you need to answer questions about security when they arise.We incorporate a variety of security features into our product designs. These features includerecommendations from the National Institute of Standards and Technology (NIST) among others, and theyare aimed at meeting our secure lifecycle protections. While we do not publish a comprehensive list of oursecurity features, the following list is a small example of some of the techniques employed in our systemdesigns for HomeWorks QSX processors, Clear Connect Gateway – Type X devices and associatedservices (such as mobile applications and cloud resources):1. Secure and authenticated remote access with unique keys for every HomeWorks QSX system.2. A secure hardware element (“chip”) on all HomeWorks QSX processors and Clear Connect – Type XGateway to guard the keys used for secure communication and authentication.3. Enforcing industry-standard encrypted communication and techniques for our integrationprotocols to the highest extent possible. Any integrated third-party components or systems shouldbe evaluated independently.4. Secure commissioning – all communication between the system programming software tool / appand the processors is encrypted and authenticated. Programming a system requires permission toaccess that system.5. Security updates are pushed out automatically to the lighting system for urgent security patches.Lutron is committed to one year of security support from system start-up date.6. Use of industry-standard techniques for cloud-based integrations, such as OAuth2.0.7. Signed processor firmware to ensure a firmware update is authentically from Lutron.If you have additional questions or would like to make a vulnerability disclosure to Lutron, please contactLutron’s 24/7 Technical support Line at 1.844.LUTRON1 or visit us at support@lutron.comwww.lutron.com/support3Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications3691127c02.18.21HomeWorks QSX ProcessorDimensionsDimensions shown as: in (mm)Front ViewSide View2.38(60.5)CCICOMCOMV L2L14.25(108)0,28 in7 mmHomeWorks QSX ProcessorHQP7-23.54 3.94(90) (100)24-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657MUXMUXV L2: 24 V- 1.0 ACOMMUXMUXV COML1: 24 V- 1.0 A4,4 in-lb0,5 N mwww.lutron.com/supportLED DEL 4Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications3691127c02.18.21HomeWorks QSX ProcessorMountingL( ) N(-)DIN RailPower Supply(QSPS-DH-75-H)L( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / Sortie120 - 240 VInput / Entrada / EntréeQSPS-DH-1-6024 VOutput / Salida / SortieQSPS-DH-1-6022.5 - 25 V22.5 - 25 V(4) Red Link 1 (optional)(3) Red Link 2 (optional)0,28 in7 mmCCICOMCOMV L1L2CCICOMCOMV L1L2(2) Red V Processor Power0,28 in7 mmHomeWorks QSX ProcessorHomeWorks QSX ProcessorHQP7-2HQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.065724-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657(1) Black COM (Common)MUXL2: 24 V- 1.0 AV V MUX MUX MUXLED DELCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mCOMMUXV V MUXMUXMUXL2: 24 V- 1.0 ACOMCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mLED DEL 4321Wire Landing Boards(QS-WLB)CCICOMCOMV L2L1L-LV21/HQ-LV210,28 in7 mmHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657MUXV MUXL2: 24 V- 1.0 ACOMV MUXMUXCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mLED DEL L( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / SortieCCICOMCOMV L1L222.5 - 25 V0,28 in7 mmHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657L-LV14www.lutron.com/supportMUXV V MUXMUXMUXCOML2: 24 V- 1.0 A4,4 in-lb0,5 N mLED DEL 12 34 512 34 512 34 512 34 512 34 5COML1: 24 V- 1.0 APDx- Control Panel5Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

L( ) N(-)L( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / SortieQSPS-DH-1-60120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / SortieQSPS-DH-1-6022.5 - 25 V22.5 - 25 V4,4 in-lb0,5 N mCCICOM 24COML1L2COM 24COML1CCIV MUX MUX TxRxL1L2V 0,28 in7 mm DELMUX MUX COM0,28 in7 mm TxRxCOM02.18.213691127c DELL2product specificationsHomeWorks QSX ProcessorCCICOM 24COM0,7L10,28 in7 mmL2Wiring Diagrams—NetworkingMUXMUXV 4,4 in-lb0,5 N mL1L2V MUX MUX TxRxCOMLED DELCOMConnection using an Ethernet hub/switch/routerLED DEL TxRx 40Ethernet RouterCCICOMCOMV L10,28 in7 mmHomeWorks QSX ProcessorL2CCICOMCOMV L2L1Ethernet cable: Cat5e (minimum)328 ft (100 m) maximum0,28 in7 mmHomeWorks QSX ProcessorHQP7-2HQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.065724-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657HomeWorks QSXProcessor HQP7-2MUXV L2: 24 V- 1.0 AMUX V MUX MUXLED DELCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mCOMMUXV MUXMUXL2: 24 V- 1.0 ACOMV MUXCOML1: 24 V- 1.0 AMaximum of 5 processors can bedaisy chained together.4,4 in-lb0,5 N mLED DEL HomeWorks QSXProcessor HQP7-2Ethernet RouterHomeWorks QSX ProcessorCCICOMCOMHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.065724-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657HomeWorks QSXProcessor HQP7-2MUXV L2: 24 V- 1.0 AMUXV MUX MUX COML1: 24 V- 1.0 ALED DELCOMMUXV MUXMUXCOMV MUXCOML2: 24 V- 1.0 A4,4 in-lb0,5 N mIEEE 802.3af-2003 or802.3at-2009 compliantPoE Injector/supplyby others.0,28 in7 mmHQP7-2L1: 24 V- 1.0 Awww.lutron.com/supportV L10,28 in7 mmL2CCICOMCOMV L2L1Ethernet cable: Cat5e (minimum)328 ft (100 m) maximum4,4 in-lb0,5 N mLED DEL HomeWorks QSXProcessor HQP7-26HomeWorksClear Connect Type X GatewayHQP7-RFMaximum of 5 devices can bedaisy chained together.Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications02.18.213691127cHomeWorks QSX ProcessorWiring Diagrams—HomeWorks Clear Connect - Type AHomeWorks QSX ProcessorHQP7-2HomeWorks Clear Connect Type A DeviceHomeWorks QS Hybrid RepeaterHomeWorksClear Connect Type A Device0,28 in7 mmCCICOMCOMV L230 ft (9 m)maximumL1HomeWorksClear Connect Type A DeviceHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657Hybrid RepeaterHybrid RepeaterHybrid RepeaterMUXV MUXL2: 24 V- 1.0 ACOMV MUXMUXCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mLED DEL Repeater Status 1P2Repeater ddActivatePower Repeater Link9V24 23MUX9V24 VPower Repeater LinkCOM4MUX24 V3TestTestMUXCOMMUX2MUX1Repeater Status3RFWiredPower Repeater Link9V2CommunicationRFSetup1PCommunication430 ft (9 m)maximumHomeWorks Clear Connect Type A Link*1000 ft (305 m) maximumwire length per run60 ft (18 m) maximumHomeWorks Clear Connect - Type A Link*1000 ft (305 m) maximum wire length per runHomeWorks Hybrid Repeaters can be powered from the Processor link or a wall-mount transformer. If powering from a wall-mount transformer,Pin 2 does not get connected.Wiring Diagrams—QS Wired Device LinkL( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / SortieQSPS-DH-1-60CCICOMCOMV L2L122.5 - 25 V0,28 in7 mmHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657MUXMUXV L2: 24 V- 1.0 ACOMV MUXMUXL1: 24 V- 1.0 ACOM*30 ft (9 m)maximum4,4 in-lb0,5 N mLED DEL QS LinkQS Linkup to 99 device addressesup to 99 device addressesMaximum 2 A combined current draw from processor whenpowering both links from the same power supply.www.lutron.com/support7Customer Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

product specifications02.18.213691127cHomeWorks QSX ProcessorWiring Diagrams—Link PowerMore current can be supplied by anadditional power supplyL( ) N(-)(4) Red Link 1 (optional)L( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / Sortie120 - 240 VInput / Entrada / EntréeQSPS-DH-1-6024 VOutput / Salida / Sortie(3) Red Link 2 (optional)(2) Red V Processor PowerQSPS-DH-1-6022.5 - 25 V22.5 - 25 V(1) Black COM (Common)CCICOMCOMV L1L243210,28 in7 mmHomeWorks QSX ProcessorHQP7-224-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657MUXMUXV V MUXMUXL2: 24 V- 1.0 ACOMCOML1: 24 V- 1.0 A4,4 in-lb0,5 N mLED DEL 2A2AMax 2 A per link when using a separatepower supply for each linkWiring Diagrams—QS Wired Device Linkwith Shades / Draperies (Controllable Window Solutions)L( ) N(-)120 - 240 VInput / Entrada / Entrée24 VOutput / Salida / SortieQSPS-DH-1-6022.5 - 25 V2340,28 in7 mm24-36 V- 250 mA SELV NEC Class 2lutron.com 1.844.LUTRON1 44.(0)20.7702.0657120 V 60 Hz(2) 24 V-MUXMUXV L2: 24 V- 1.0 ACOMV MUXMUXCOM24 V- 1 A(3) MUXHomeWorks QSX ProcessorHQP7-2L1: 24 V- 1.0 ARatings:(4)CCICOMCOMV L2L114,4 in-lb0,5 N mLED DEL (1) COMQS LinkHomeWorks QS wired devicesQSPS-10PNLQS Smart PowerPanelLutron, HomeWorks, Clear Connect, and Maestro are trademarks orregistered trademarks of Lutron Electronics Co., Inc. in the US and/orother countries.HomeWorks QSwired devicesAll other product names, logos, and brands are property of theirrespective er Assistance:1.844.LUTRON1 (U.S.A. / Canada) 44.(0)20.7680.4481 (Europe)

Low-Voltage Link Wire Type Two pair — one pair 18 AWG (0.75 mm2), one pair 18 to 22 AWG (0.34 to 0.75 mm2) twisted shielded — IEC PELV / NEC Class 2 cable Low-Voltage Power Wire Type 18 AWG (0.75 mm2) Communications Ethernet, RS485 (QS, RF) Link Capacities HomeWorks QS Wired Device Link 99 devices/512 zones