WIXLIB

Data Sheet – BASrouterBASrouter — BACnet Multi-Network Router (3.0 Version)The BASrouter is a compact BACnet multi-networkrouter which provides versatile stand-alone routingbetween BACnet/IP, BACnet Ethernet (ISO 8802-3), andBACnet MS/TP networks. The BACnet router is webpage configurable and it is powered by 24 VAC/VDC.The BASrouter has a number of troubleshooting/diagnostic capabilities. The BACnet MS/TP “Status”webpage contains a graphical table of all of the MS/TPdevices on the network and their status. Also providedare network statistics, in addition to a BACnet/IP“Routing” webpage with a discoverable routing tablewhich is useful when setting up or troubleshooting aBACnet network.Versatile Routing Between BACnet/IP and BACnet MS/TP BACnet Ethernet and BACnet MS/TP BACnet/IP and BACnet Ethernet BACnet/IP and BACnet Ethernet andBACnet MS/TP Two BACnet/IP Networks(between two UDP ports)Network diagnostics Webpage with graphical network map of all 128MS/TP master devices and their status MS/TP error count BACnet network traffic statistics Discover and View current BACnetrouting tableIP Network Support Web server for commissioningand troubleshooting DHCP option to automatically acquireIP address BACnet/IP Broadcast Management Device (BBMD) Foreign Device Registration (FDR)Flexible Communications 10/100 Mbps Ethernet with auto-negotiation andAuto-MDIX Optically isolated MS/TP port MS/TP baud rates range from 9.6–76.8 kbpsConvenient Installation 24 VAC/VDC ( 10%), 47–63Hz input voltage Din-rail mounted Outdoor temperature operation -40 C to 75 CBACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or testproducts for compliance with ASHRAE standards. Compliance of listed products to therequirements of ASHRAE Standard 135 is the responsibility of BACnet International (BI).BTL is a registered trademark of BACnet International.DS-BASRTB00-AB4

Data Sheet – BASrouterBASrouter — BACnet Multi-Network RouterThe BAS Router is housed in a metal case that mounts on35-mm DIN-rail and is powered from a 24 VAC/VDC ( 10%)source. There is one MS/TP port and one 10/100 MbpsEthernet port.The MS/TP port offers an optically-isolated transceiver. It hasa removable 3-pin terminal block for the EIA-485 connection.The Ethernet port offers a shielded RJ-45 connector. Autonegotiation and Auto-MDIX allow this port to automaticallymatch connections to the attached equipment. Therefore,either straight-through or crossover CAT5/6 cable can beused for hook-up.factory default IP address of 192.168.92.68 (/24). Three LEDsare provided: The power LED glows green when properpower is provided. A bicolour Ethernet LED glows green for100 Mbps, and yellow for 10 Mbps, and indicates activity byflashing. MS/TP LED flashes green when valid MS/TP traffic isreceived. When flashing continuously and without longinterruptions, the MS/TP receive LED is a good indicator thatthe MS/TP network is operational.Internal MS/TP bias and termination jumpers allow flexiblebias and termination options. They can be removed formid-span installations.A resident web server allows for commissioning, andtroubleshooting using a standard web browser. A resetswitch is provided on the router to return the unit to thePower Input24 VAC/VDC 4 VA half-wave regulateddesign allows power sharing with otherPower LEDhalf-wave devices.Power OK indicatorEthernet10/100 Mbps Ethernet with auto-negotiation andAuto-MDIX. Protocols supported include HTTP, IP,UDP, TCP, BACnet Ethernet, and BACnet/IP.Ethernet LEDMonitors Ethernet activityMS/TP LEDReset IPMonitors MS/TP activitySwitch returns BAS Router todefault IP address and defaultpassword settings.MS/TP3-wire isolated EIA-485connection with support for2-wire non-isolated devices2DS-BASRTB00-AB4

Data Sheet – BASrouterWeb Page ConfigurationBASRTB ConfigurationBASRT-B3.0.3Status ScreenThe Status screen is always operational as long as theBASrouter is powered. It consists of MS/TP Device Statustable, Network Errors count, and Statistics on BACnetnetworks to which the BASrouter is connected. TheStatus page will automatically refresh every 5 secondswith the updated status on networks and devices — soyou can observe the network state changes and gaininsight into the condition of the BACnet network (asseen by the BASrouter). These statistics are retainedover time, unless the BASrouter is powered off orrebooted from the main web page using the “SaveChanges” button, then all Status page parameters arereset. The “Reset Statistics” button on Status page willreset Network Errors count, and Statistics, but retain theMSTP Device Status table history. For more informationon the Status page refer to the BASrouter User Manual.BASRTB Status3DS-BASRTB00-AB4

Data Sheet – BASrouterRouting TableMultiple networks, possibly employing differentphysical layer technologies, may be interconnectedby BACnet routers to form a BACnet internetwork.The Routing table web page provides a routingtable which contains information about the networktopology of the surrounding BACnet internetworksuch as Destination Network, Network Type, ConnectingNetwork, and Network Status. This table will be blankupon powering the BASrouter. Click the “DiscoverRouting Table” button to discover other routers on theBACnet network which will send a “Who-Is-RouterTo-Network” message and fill the table with thediscovered BACnet routers.BASRTB Routing Status4DS-BASRTB00-AB4

Data Sheet – BASrouterBAS Router Parameters Main SettingsDevice ParametersDefault ValueDescriptionDevice NameBASRT-BxxxxxxThe unique default value ends with the last 6 characters of the unit’sEthernet MAC address. You can edit it to be up to 20 characters.Device Instance0The router device instance is a 22-bit decimal value (0–4,194,303).Each BACnet device has a unique device instance.BACnet Ethernet ParameterDescriptionDefault ValueBACnet Ethernet Network016-bit decimal value (1–65534). Each BACnet network, regardless oftechnology, must have a unique network number. By retaining thedefault value of 0, BACnet Ethernet routing is disabled.BACnet/IP ParametersDescriptionDefault ValueBACnet/IP UDP PortBAC016-bit hex value (0–FFFF) is set to BAC0 as the default value andshould be used. All BACnet/IP devices on the same BACnet networkmust have the same UDP port assignment. For other assignmentschoose ports in the range from BAC1 to BACF while verifying thatthese ports are available.BACnet/IP Network116-bit decimal value (1–65534). Each BACnet network, regardless oftechnology, must have a unique network number. It is recommendedthat all subnets of the same BACnet/IP network be given the sameBACnet network number as well.IP Address192.168.92.68IP address in dotted decimal format. Select a valid address in the rangefrom 0.0.0.1 through 255.255.255.254.IP Subnet24Decimal value (0–30) in the “slash” notation is the number of bits witha “1” in the mask. The default value of 24 corresponds to 255.255.255.0in the dotted decimal format. All devices on the same subnet whichcommunicate via BACnet/IP should use the same subnet mask.IP Gateway192.168.92.1IP Gateway address in dotted decimal format. Select a valid address inthe range from 0.0.0.1 through 255.255.255.254.MS/TP ParametersDescriptionDefault ValueMS/TP MAC Address0Decimal value (0–127) represents the MAC address of the router’sMS/TP port. Lower MAC address numbers are preferred.MS/TP Network200116-bit decimal value (1–65535). Each BACnet network, regardless oftechnology, must have a unique network number.Max Masters127This 8-bit decimal value (1–127) represents the highest master MACaddress in the MS/TP network. If the highest value MAC address isunknown or if additional devices are to be added in the future above thecurrent highest MAC address, use the default setting of 127.Max Info Frames100This is the maximum number of messages (1–100) that can be routedonto the MS/TP network by the router per token pass. Values above 20are typical.MS/TP Baud Rate38400The baud rate of the MS/TP network can be 9600, 19200, 38400 or76800 bps. All MS/TP devices on the same MS/TP network must usethe same baud rate. Auto-bauding devices will set their baud rates tothat of the BAS Router.MS/TP ToleranceLenientAffects the degree to which interoperability with devices is successful.Lenient option causes less efficient traffic but optimises interoperability.5DS-BASRTB00-AB4

Data Sheet – BASrouterBAS Router Parameters Advanced Settings — BBMDBBMD ParametersDefault ValueDescriptionBBMD EnableUncheckedCheck to enable BACnet/IP Broadcast Management Device (BBMD).BBMD UDP PortPrimaryNormally the primary port is selected. The secondary port is usedin very special applications.Accept FDRUncheck to disable foreign devices from registering with this router.CheckedSecondary BACnet/IP UDP Port0000Enter secondary UDP port as a 16-bit hex value (0-FFFF) whenoperating with two BACnet/IP BACnet networks. In this caseBAC1 if it is available.Secondary BACnet/IP NetAssign a unique network number from all other BACnet networks.0Public IP Address0.0.0.0useEnter the public IP address in dotted decimal format of the IProuter in the system.BAS Router Additional Tables and ScreensTable or Screen NameDescriptionBroadcast Distribution Table (BDT)This table must contain the entries of any other BBMDs located onthe network. The IP address and subnet mask of the BBMDs mustbe listed.Foreign Device Table (FDT)This table is automatically lists all the foreign devices that haveregistered with this router. Information includes IP address, portnumber, time-to-live, and remaining time on its lease.Status ScreenDisplays a log of events (automatically refreshed each second) tofacilitate troubleshooting. Use this information when discussing anyrouting issues with Contemporary Controls’ technical support.Security ScreenAuthentication menu. Allows the user to change user name andpassword. Depressing the Reset IP button restores user name andpassword to default settings.6DS-BASRTB00-AB4