Transcription
Network Appliance NS0-520NetApp Certified Implementation Engineer - SANONTAPNetwork Appliance NS0-520 Dumps Available Here -appliance-exam/ns0-520-dumps.htmlEnrolling now you will get access to 60 questions in a unique set of NS0520 dumpsQuestion 1A customer wants to deploy NVMe/FC along with an existing FC SAN fabric using ONTAP 9.8.In this scenario, which two actions are correct? (Choose two.)Options:A. Enable NVMe/FC on the existing FC SVM.B. Create new zoning on fabric switches.C. Upgrade your FC switches from 16 GB to 32 GB.D. Use existing zoning on fabric switches.Answer: C, ps://www.certification-questions.com
Network Appliance NS0-520Question 2Click the Exhibit button.https://www.certification-questions.com
Network Appliance NS0-520You are configuring a new NetApp ONTAP cluster and are connecting the nodes to Cisco MDS SANswitches. You connect one of the nodes to switch port fc1/11 and run the commands that are shown in theexhibit. The SAN LIFs are enabled but are not operationally online, and none of the SAN hosts can accesstheir LUNs on the ONTAP cluster.In this scenario, which configuration would cause this problem?Options:A. NPIV is not enabled on the switches.B. Interoperability mode is not enabled on the switches.C. NPV is not enabled on the switches.D. The in-order guarantee is not enabled on the switch.Answer: BExplanation:t t p s : / / d o c s . n e t a p p . c o m / u s - e n / o n t a p - m e t r o c l u s t e r / i n s t a l l fc/task fcsw cisco configure a cisco switch supertask.html#config-e-ports-cisco-fcQuestion 3You are installing an AFF A250 system with ONTAP 9.8 software. Your customer asks you about therecommended LIF configuration for the iSCSI protocol.In this scenario, which two statements are correct? (Choose two.)Options:A. Each node in an iSCSI configuration must be connected to a minimum of two Ethernetswitches.B. Each SVM in an iSCSI configuration must have a minimum of two LIFs per node.C. All LIFs from the SVM are connected to a single Ethernet switch.https://www.certification-questions.com
Network Appliance NS0-520D. Each SVM in an iSCSI configuration must have a minimum of one LIF per node.Answer: A, estion 4A customer has a 4-node cluster consisting of a FAS8020 system and an AFF A220 system that is runningiSCSI workloads across two separate SVMs. The FAS8020 system is reaching end of support, so they adda new AFF A400 system to migrate workloads off the FAS8020 system. The customer wants to migratedata off the FAS8020 aggregate n1 aggr1 on SVM2 to the AFF A400 aggregate n5 aggr1 on SVM1.In this scenario, which NetApp command would accomplish this task?Options:A. volume moveB. aggregate reallocationC. volume reallocationD. volume rehostAnswer: uestions.com
Network Appliance D6346AD1D761.htmlQuestion 5Which NetApp tool provides a detailed inventory of SAN components?Options:A. Hardware UniverseB. Active IQ Config AdvisorC. Interoperability Matrix ToolD. Active IQ OneCollectAnswer: ons.com
Network Appliance NS0-520Question 6You want to move a SAN LIF and preserve its configuration information and avoid rezoning the switchfabric.In this scenario, which two steps must be performed to fulfill this goal? (Choose two.)Options:A. Keep the SAN LIF online before it is moved.B. Take the SAN LIF offline before it is moved.C. Move the SAN LIFs to another node in a cluster on different storage virtual machines (SVMs).D. Move the SAN LIFs to another node in a cluster on existing storage virtual machines (SVMs).Answer: B, ap-9/index.jsp?topic -4252-BEEF-D556A143CD30.htmlQuestion 7Your customer asks you how to connect a host for SAN access to the newly installed AFF A400 system.In this scenario, which two statements are correct? (Choose two.)Options:A. Direct connection to the nodes from the hosts with FC is not supported.https://www.certification-questions.com
Network Appliance NS0-520B. Direct connection to the nodes from the hosts with iSCSI is not supported.C. Direct connection to the nodes from the hosts with iSCSI is supported.D. Direct connection to the nodes from the hosts with FC is supported.Answer: B, DQuestion 8Click the Exhibit button.In an NVMe/FC environment, the host cannot discover the namespace on the AFF system.Referring to the exhibit, what is the problem?Options:A. The NQN is not correct.B. The host MPIO drivers are not installed.C. NVMe is not supported on the FC adapter.D. The NVMe service is not running on the SVM.Answer: 684.pdfQuestion 9You are designing a new 4-node AFF A400 SAN cluster with 20 iSCSI hosts. Each AFF A400 node willhave four data LIFs. Each iSCSI host needs to access every LUN over two LIFs per node on every SANnode.https://www.certification-questions.com
Network Appliance NS0-520In this scenario, which NetApp SAN feature enables this connectivity?Options:A. selective LUN mappingB. port setsC. HBA queue depthD. asymmetric namespaceAnswer: a/10379-tr4515.pdfQuestion 10You are planning on implementing a new SAN on AFF A400 controllers. The data set consists of unique 1KB files that will be encrypted before being written to the SAN.In this scenario, which ONTAP inline storage efficiency will provide 4:1 savings for this workload?Options:A. autogrowB. deduplicationC. compressionD. compactionAnswer: Bhttps://www.certification-questions.com
Network Appliance com/netapp-deduplication-compressionWould you like to see more? Don't miss our NS0-520 PDFfile cation-questions.com
Question 2 Click the Exhibit button. Network Appliance NS0-520 https://www.certification-questions.com
