WIXLIB

TJX CompaniesclientSign/Branding Programpresentation01/02/13date created:Design, concept and image development createdand produced by Signs & Services Company.All copy and content copyright of Signs & ServicesCompany. No part of this design or concept maybe copied or reproduced in any form without thewritten permission of Signs & Services Company.CLIENT APPROVALAPPROVEDAPPROVED AS NOTEDREVISE AND 6942SHEET #

Paint Molding T/MBM #2087-10 Neon RedNew Wall-Sconce Downlight-Column-Fixtures(See Specs Details)6.0ColumnSigns6.1Fabrication SpecificationsNon-IlluminatedProjecting Column SignsMinimum 8’-0” To GradeNew Radius Non-IlluminatedAluminum Column Sign withFCO Acrylic Plastic Applied LetteringTJX CompaniesclientSign/Branding ProgramNOTE: Column Signs Purchased & InstalledBy TJX Contractor.presentation01/02/13Radius Non-Illuminated Column Sign Concept (White on Red)Option 1: 36" ColumnDesign, concept and image development createdand produced by Signs & Services Company.DIMENSIONSAttach Radius Panel Sign In Two (2)Pieces To Existing Column (Min 8’-0”To Grade From Bottom Of Sign) UsingAngle Aluminum Clips Painted 2 ToneTo Match Sign Cabinet & Column ColorsWith #10 Lag Screws With Plastic Shields(Minimum Six (6) Per Sign Panel Typical)15 25/32"(400 mm)8 1/8"(206 mm)CLIENT APPROVALAPPROVEDAPPROVED AS NOTEDREVISE AND RESUBMITCOOPER LightingENVUE # ENV-C02-LED-EI-BL3-GM36” Overall Column Width (May Vary)6”Always Extend Sign 6” TypicalBeyond Column-Edges. (ColumnsMay Vary. Even In Same Location)(NOTE: Verify EACH COLUMN’sWidth Prior To ANY Fabrication)7.25” Letters14” Panel Ht6”All copy and content copyright of Signs & ServicesCompany. No part of this design or concept maybe copied or reproduced in any form without thewritten permission of Signs & Services Company.7 3/4"(196 mm)1” Square Aluminum Tube Sub-Frame With.080” To .125” Thick Aluminum Skin PaintedT/M Matthews Paint PMS #186 C Red Enamel Paint(Satin Finish)date created:Signature:Minimum 8’-0”Radius Panel Sign ElevationScale: 1/2” 1’-0”6”6”.080” To .125” Aluminum Skin PaintedT/M Matthews Paint PMS #186 C RedEnamel Paint (Satin Finish)Attached To Radius Sign Bracket UsingAngle Aluminum Clips Painted To MatchSign Exterior (Satin Finish) Attach UsingCounter-Sunk Screws Into Bracket-BoxAttach Face To Clips Using Lord’s Glue6”36” Overall Column Width (May Vary)1/2” Thick Clear Frosted Flat-Cut-OutAcrylic Plastic Letters Faced With#02 High Performance OpaqueFace-Applied Vinyl Film MaterialAttach Letters Using Silicone CementAnd Double-Sided VHB Tape (NOTE:Letters Are Only On Front Side Of Sign)4.4”Attach Face To ClipsUsing Lord’s Glue &Counter-Sunkl Screws48” Overall Panel Width (Depending Upon Column Width)Into Bracket Box. PaintAngle Clips To MatchSign Exterior. Paint ClipsThat Attach To ColumnsThe Color Of The Column(Verify @ Each Location)24” Overall Mounting Bracket Width48” Overall Radius Sign Panel WidthRadius Panel Sign Plan ViewScale: 1/2” 1’-0”Attach Sign Face with LettersUsing Angle Aluminum ClipsHeld By Counter-Sunk ScrewsEvenly Spaced @ Sign SidesPainted To Match Matthews PaintPMS #186 C Red Enamel Paint(Satin Finish)Sign Face Radius 46.75”signsandservicesco.com1.800.743.6942SHEET #

Paint Molding T/MBM #2087-10 Neon RedNew Wall-Sconce Downlight-Column-Fixtures(See Specs Details)6.0ColumnSigns6.1Fabrication SpecificationsNon-IlluminatedProjecting Column SignsMinimum 8’-0” To GradeNew Radius Non-IlluminatedAluminum Column Sign withFCO Acrylic Plastic Applied LetteringTJX CompaniesclientSign/Branding ProgramNOTE: Column Signs Purchased & InstalledBy TJX Contractor.presentation01/02/13Radius Non-Illuminated Column Sign Concept (White on Red)Option 2: 60" ColumnDesign, concept and image development createdand produced by Signs & Services Company.DIMENSIONSAll copy and content copyright of Signs & ServicesCompany. No part of this design or concept maybe copied or reproduced in any form without thewritten permission of Signs & Services Company.7 3/4"(196 mm)1” Square Aluminum Tube Sub-Frame With.080” To .125” Thick Aluminum Skin PaintedT/M Matthews Paint PMS #186 C Red Enamel Paint(Satin Finish)15 25/32"(400 mm)8 1/8"(206 mm)CLIENT APPROVALAPPROVEDAPPROVED AS NOTEDREVISE AND RESUBMITEQ7.25” Letters14” Panel HtEQAttach Radius Panel Sign In Two (2)Pieces To Existing Column (Min 8’-0”To Grade From Bottom Of Sign) UsingAngle Aluminum Clips Painted 2 ToneTo Match Sign Cabinet & Column ColorsWith #10 Lag Screws With Plastic Shields(Minimum Six (6) Per Sign Panel Typical)date created:COOPER LightingENVUE # ENV-C02-LED-EI-BL3-GM60” Overall Column Width (May Vary)Signature:NOTE: Verify EACH COLUMN’sWidth Prior To ANY FabricationMinimum 8’-0”60” Overall Column Width (May Vary)Radius Panel Sign ElevationScale: 1/2” 1’-0”1/2” Thick Clear Frosted Flat-Cut-OutAcrylic Plastic Letters Faced With#02 High Performance OpaqueFace-Applied Vinyl Film MaterialAttach Letters Using Silicone CementAnd Double-Sided VHB Tape (NOTE:Letters Are Only On Front Side Of Sign)EQEQ3/8” Gap.080” To .125” Aluminum Skin PaintedT/M Matthews Paint PMS #186 C RedEnamel Paint (Satin Finish)Attached To Radius Sign Bracket UsingAngle Aluminum Clips Painted To MatchSign Exterior (Satin Finish) Attach UsingCounter-Sunk Screws Into Bracket-BoxAttach Face To Clips Using Lord’s Glue3/8” Gap24” Overall Mounting Bracket Width48” Overall Radius Sign Panel WidthRadius Panel Sign Plan ViewScale: 1/2” 1’-0”7”Attach Face To ClipsUsing Lord’s Glue &48” Overall Panel Width (Depending Upon Column Width)Counter-Sunkl ScrewsInto Bracket Box. PaintAngle Clips To MatchSign Exterior. Paint ClipsThat Attach To ColumnsThe Color Of The Column(Verify @ Each Location)Attach Sign Face with LettersUsing Angle Aluminum ClipsHeld By Counter-Sunk ScrewsEvenly Spaced @ Sign SidesPainted To Match Matthews PaintPMS #186 C Red Enamel Paint(Satin Finish)Sign Face Radius 46.75”signsandservicesco.com1.800.743.6942SHEET #

INVUE DESCRIPTIONEntri LED features a classic and stylish design with the added benefits ofsolid state lighting technology, offering outstanding uniformity andenergy savings. Using Cooper Lighting’s proprietary LED LightBAR technology and AccuLED optical systems, Entri LED offers designers vastversatility in system design, function and performance. Use Entri LED forwall mount architectural lighting applications and egress lightingrequirements. UL and cUL listed for use in wet locations.Catalog #TypeProjectCommentsDatePrepared byS P E C I F I C AT I O N F E AT U R E SConstructionOpticsMountingHOUSING: Heavy wall, one-piece,die-cast aluminum construction forprecise tolerance control andrepeatability in manufacturing.Integral extruded aluminum heatsink provides superior thermal heattransfer in 40 C ambientenvironments. Housing and heatsink are designed to offer variousoptions for down lighting, uplighting or a combination of bothup and down. FACEPLATE / DOOR:One-piece die-cast aluminumconstruction. Captive, side hingedfaceplate swings open via releaseof one (1) flush mount die-castaluminum latch on housing sidepanel. Door closure and seal isensured through a robust andpositive retention bale latch whichupon closing can be heard throughdistinct sound. GASKET: One-piecemolded silicone gasket matesperfectly between the door andhousing for repeatable seal.Silicone wire way plug on housingback wall seals incoming electricalleads to prevent moisture and dustentry. LENS: Uplight lens is impactresistant, 5/32" thick temperedfrosted glass sealed to housingwith continuous bead siliconegasket. Downlight lens is LEDboard integrated acrylic overoptics, each individually sealed forIP66 rating. HARDWARE: Stainlesssteel mounting screws and latchhardware allow access to electricalcomponents for installation andservicing.DISTRIBUTION: Primary downlightdistribution offers a choice of six(6) high efficiency AccuLED opticalsystems, featuring patenteddesigns that maximize lightcollection and directionaldistribution onto the applicationregion. Each optical lens isprecision manufactured viainjection molding then preciselyarranged and sealed on the boardmedia. Optional uplight LEDdistribution features a diffuse softglow for enhancing architecturalscenes or accentuating structuralfeatures. LEDs: High output LEDs,50,000 hours life at 70% lumenmaintenance, offered standard in4000K ( /- 275K) CCT and nominal70 CRI.JUNCTION BOX: Standard withzinc plated quick-mount junctionbox plate that mounts directly to 4"J-Box. LightBARS mount facingdownward. Fixture slides overmounting plate and is secured withtwo (2) stainless steel fasteners.Mounting plate features a onepiece EPDM gasket on back side ofplate to firmly seal fixture to wallsurface, forbidding entry ofmoisture and particulates. Optionalmounting arrangements utilize adie-cast mounting adaptor box toallow for LED battery pack, surfaceconduit and through branch wiring.Entri LED is approved for mountingon combustible surfaces.DIMENSIONSSolid State LEDARCHITECTURAL WALLLUMINAIRETMWarrantyEntri LED features a 5 year limitedwarranty.C E R T I F I C AT I O N D ATA40 C Ambient Temperature RatingU.L. and cUL ListedISO 9001IP66 LightBARSARRA CompliantLM79 / LM80 CompliantC O N D U I T M O U N T / B ATT E RY B AC K B OX7 3/4"[196 mm]15 25/32"[400 mm]1 - 2 LightBARS8 1/8"[206 mm]11"[279mm]E N E R G Y D ATAElectronic LED Driver 0.9 Power Factor 20% Total Harmonic Distortion120-277V/50 & 60hz, 347V/60hz,480V/60hz-30 C Minimum TemperatureS H I P P I N G D ATAApproximate Net Weight:16 lbs. (7.3 kgs.)CERTEMSYSDDRIVER: LED drivers are pottedand heat sunk for optimalperformance and prolonged life.Standard drivers feature electronicuniversal voltage (120-277V/5060hz), greater than 0.9 powerfactor, less than 20% harmonicdistortion and feature ambienttemperature range of 40 C(104 F) down to minimum startingtemperature of -30 C (-22 F).Shipped standard with CooperLighting proprietary circuit moduledesigned to withstand 10kV oftransient line surge. Options tocontrol light levels, energy savingsand egress capabilities (batterypack and separate circuit) areavailable. All LED LightBARS anddrivers are mounted to a primarymounting plate and are easilyreplaced by use of quickdisconnects for ease of wiring.Housing is finished in 5 stage superpremium TGIC polyester powdercoat paint, 2.5 mil nominalthickness for superior protectionagainst fade and wear. LightBAR cover plates are standard whiteand may be specified to matchfinish of luminaire housing.Standard colors include black,bronze, grey, white, dark platinumand graphite metallic. RAL andcustom color matches available.Consult Outdoor ArchitecturalColors brochure for a DREVEALSTIFIEAVU092078 pc2011-07-11 10:01:17