Transcription
window systems quiet electronic drives
Lutron Sivoia QEDTM(quiet electronic drives)Sivoia QEDnatural light controlLutron has been the world’s leadingmanufacturer of lighting control systems formore than 40 years. Now, Lutron hasopened up a new world of possibilities byseamlessly integrating electric and naturallight control systems with a focus oninnovation, world-class engineering, andcustomer service. Lutron blendstechnology with design and environmentalsensitivity to provide the ideal solution forany specification.ApplicationsResidentialA Sivoia QED system allows ahomeowner to have convenientcontrol of sunlight at the touch ofa button. Enhance any room inyour home with Sivoia QEDultra-silent operation.HospitalityCreating a memorableexperience in a restaurant is asmuch about atmosphere as it isabout cuisine. Sivoia QED, alongwith Lutron lighting controls, areintegral to setting the mood withappropriate light levels. SivoiaQED ultra-quiet operation makestransitions subtle so they do notinterfere with the ambience oractivities in hospitality spaces.CorporateThe control of natural light iscritical for productivity, comfortand energy savings inapplications such as corporateboardrooms, training areas,conference rooms and executiveoffices. Today’s dynamic businessenvironments require the flexibilityto transition a well-lit boardroommeeting into a theatre-styleaudio/video presentation at thetouch of a button.
Innovations innatural light controlQuality and performanceThe Sivoia QED family of quiet electronic drives offersconvenience at the touch of a button. Lutron’s quietelectronic drive technology provides near-silentperformance, operating smoothly and in perfect alignment.Ultra-quiet electronic driveThe Sivoia QED drive operates roller blinds and curtains ata near-silent level rated at 44 dBA at 1m.Intelligent controlThe Sivoia QED electronic drive unit (EDU) optimises blindand curtain adjustment by offering programmable presets.Save and recall preset blind levels from an intuitive keypad.Additionally, blinds will move smoothly, in unison, and withexact alignment.Simplified installationThe system can be configured and reprogrammed at thepoint of control without any rewiring, without access to theEDU, and without the use of a group controller. The SivoiaQED mounting brackets allow an installer to adjust theblind’s level, projection, and side-to-side position, all afterthe blind has been installed.Integration of natural and electric lightLutron lighting control systems work together withSivoia QED controllable window systems to offercomplete control of all the light in any space. Blindsadjust as lights dim or brighten to generate light levelsfor any mood or activity.table of contentsSivoia QED overview 2-5residential integration 4-5commercial integration 6-7specification overview 8features & benefits 9accessories 10-16system maps 17roller blind details 18-25curtain track details 26-31Lutron 1
Lutron Sivoia QEDTMQuiet Electronic Drive technologyfor natural light control 2 LutronTypical systemElectronic Drive Unit (EDU)Intuitive keypad with programmable presetsCommon communication linkConfigurable brackets and mounting hardwareLow voltage AC power supplyOptionsInfrared transmitter and receiver for wireless controlAutomatic control via timeclocks or daylight sensorsContact closure inputs to integrate with other home andbuilding control systemsComplete integration of Lutron lighting control systems, suchas Grafik EyeTM or HomeWorksTM systems
System mapCurtain trackEDURoller blind electronicdrive unit (EDU)BBBAAA24 VACpower supplyEach powersone EDUseeTouchTM keypadControl one or a group of EDUs To next keypad orcontact closureinterface or EDUInfrared transmitter Contact ClosureInterfaceCommunicate withexternal systemsACommunications link4 conductorsBPower wires3 conductors System maximums96 devices (includesEDUs, keypads andcontact closure inputinterfaces)Optional infraredremote controlGroups are createdelectronically and donot require the use ofan external groupcontrollerUse Lutron lightingcontrol systems to linkmultiple Sivoia QEDsystems for control ofmore than 96 devicesLutron 3
integration 4 Lutron residential lighting control
Elegant, intuitive controlSeamlessly integrate blinds and curtains with Lutron lighting controlsystems throughout the home. Control both electric and natural lightwith keypads that have a consistent design aesthetic. Entire roomLutron’s Grafik EyeTM lighting control system offers scene-based controlof the lights in any area of the home. One button can adjust lighting andblinds with subtle or dramatic transitions.Home cinemaBedroomLoungeWhole homeExpand one-touch control to the entire home with Lutron’sHomeWorksTM lighting control system. Integrate with AV, security andother home systems. Simplify daily routines and enhance security, all atthe touch of a button.Any size homeWireless keypadsAutomatic control via astronomic timeclockLutron 5
integration 6 Lutron commercial lighting control
Ease of useMake a space as productive as possible with one-touch control of bothnatural and electric light. Ultra-quiet operation allows for subtle transitionsthat do not interfere with the atmosphere or activities in the space. Entire roomBring integrated control of lighting, window systems, and projectionscreens to presentations and classrooms. Lutron’s Grafik EyeTMtransforms the well-lit boardroom to an ideal environment for an AVpresentation.Conference room/boardroomClassroomExecutive officeWhole buildingControl lighting and motorised window systems in any space orthroughout the entire building with Lutron’s Grafik SystemsTM. Reduceglare and eye fatigue, maximise HVAC efficiency, and increase productivitywith automated adjustment of blinds and lighting.Restaurants and hotelsGalleriesCorporate officesLutron 7
Sivoia QED Communications circuitEstablishes the unique andversatile system architecturethat enables completeflexibility in programming,integration, andinterconnectivityAddresses, programs, andreconfigures the system fromany system component: theEDU mounted in the ceiling,keypad installed in the wall ora handheld remote controlEliminates the need forexternal “group controllers,”simplifying programming andfuture changes to the systemTM specification overviewHall effect sensors Measures motor position toensure blinds move inperfect unison and in exactalignmentDigitally sets and storeslimits and does not rely ontraditional analoguemechanics for status andfeedbackProtection againstelectrostatic dischargeProvides safe, controllabledischarge of potentiallydamaging static created byblind fabricRubberisedmotor couplerCustom fit todampen vibrationbetween motorand blind tubeGear-motor Features precision helical gearingdesign to ensure ultra-quiet operationCombines time proven gear-motortechnology with Lutron’s controlexpertise to provide superior lifetimeand performanceElectronic drive unit (EDU)Electronic drivecircuit Back of circuit board Variable-speed motordrive provides efficientpower delivery to theEDU and ensuressilent, accurate controlOperates atfrequencies inaudibleto the human earMicroprocessor Uses a feedback control loop to provide smooth,consistent blind movement. Blinds move at constantRPM, ensuring hembars are aligned and track togetherPatented acceleration profile algorithm graduallyincreases and decreases EDU speed to provide elegantmovement and eliminate audible starts and stopsStores unique, user-defined preset levels for eachkeypad accurate within 2mm that are programmableat any point along the travel of the blindProvides LED feedback for system status and ease ofprogramming 8 Lutron10-year power failure memoryRecords motor movements to ensurethat position and movement areaccurately saved even if the EDU isactive when power is interrupted
feature benefitsFeatureUltra silent functionalityBenefits The Sivoia QED (quiet electronic drive) system operates at a near-silent level(rated at 44 dBA at 1m) Sivoia QED ultra-quiet operation makes transitions subtle and starts and stops silent The Sivoia QED system has typical light gaps of less than 20mm per side These are symmetrical on each side of the blind ensuring a clean aesthetic in the space Lutron controls are designed to match the high-end look and feel of today’s premiereliving and working spaces SeeTouchTM keypad design offers backlit, ergonomic buttons with customisable engraving. Available in a range of colours and metal finishes, Lutron window system keypadsintegrate seamlessly with Lutron lighting keypads The Sivoia QED system can be reconfigured and presets can be reprogrammed at thepoint of control without rewiring and without access to the electronic drive unit mountedin the window Each electronic drive unit (EDU) stores multiple presets positioned anywhere along thesystem travel and a full open and a full close limit The Sivoia QED system uses 24 VAC low voltage and does not require any groupcontrollers, relays, or line-voltage wiring between electronic drive units Highly configurable mounting brackets allow an installer to adjust a blind’s level, projection,and side-to-side position, all after the blind is installed Preset positions on the Sivoia QED system are electronically, precision-set and lockedinto a 10-year power-failure memory These presets as well as the top and bottom limits will never slip or get lost regardlessof age, electrostatic discharge (ESD), or power failure The Sivoia QED system’s electronic components are tested to withstand a 15,000 voltelectrostatic discharge without damage or loss of memoryPrecise movement All blinds in a Sivoia QED system will start, stop and move in unison and in precisealignment at all times for the life of the systemSystem integration Lutron lighting controls, such as HomeWorksTM and GRAFIK EyeTM, seamlessly integratewith Lutron’s Sivoia QED window systems, offering single-button control of both lightingand blind presets for your projectHigh performance electronics Sivoia QED uses robust components that operate at least 20 C below their ratedtemperature to ensure years of dependable operation.Technical support Lutron Electronics has been the world leader in the lighting control industry and thedesigner’s choice for over 40 years Lutron’s Sivoia QED system comes with an 8-year limited warranty Lutron has in-house field service engineers throughout the world to provideworld-class service and technical supportMaximum window coverageAesthetic design optionsEase of programmingEase of installationPower failure memoryLutron 9
Lutron keypadsSQE-RLNShown actual size.See below for details.DESCRIPTION Offers raise and lower or full-open/full-closeafter a 4 second maintained press Controls either a single EDU or a group ofEDUs operating together Mounts in a standard European backboxSQE-2NTwo button keypad Offers full-open and full-close Offers "stop if moving" tap from any buttonProduct dimensionsW: 86mm (3.39”)H: 86mm (3.39”)D: 21mm (0.83”) Controls either a single EDU or a group ofEDUs operating together Mounts in a standard European backboxSQE-RLNTwo button keypadProduct dimensionsW: 86mm (3.39”)H: 86mm (3.39”)D: 21mm (0.83”) 10 LutronFUNCTIONS
DESCRIPTIONSQE-3ENThree button keypadwith raise/lower andinfrared receptionProduct dimensionsW: 86mm (3.39”)H: 86mm (3.39”)D: 21mm (0.83”)SQE-3DNSix button keypadfor dual mount or twogroup applicationsProduct dimensionsW: 86mm (3.39”)H: 86mm (3.39”)D: 21mm (0.83”)SQE-33NSix button keypadfor three groupapplicationsProduct dimensionsW: 86mm (3.39”)H: 86mm (3.39”)D: 21mm (0.83”)FUNCTIONS Offers full-open, full-close, raise/lower, infraredreception and one programmable preset Offers "stop if moving" tap from any button Infrared receiver controls all, or a subset of theEDUs assigned to keypad Controls either a single EDU or a group ofEDUs operating together Mounts in a standard European backbox Offers full-open and full-close and oneprogrammable preset Offers "stop if moving" tap from any button Controls either two single EDUs or two groupsof EDUs operating together Mounts in a standard European backbox Offers full-open and full-close and oneprogrammable preset Offers "stop if moving" tap from any button Controls either three single EDUs or threegroups of EDUs operating together Mounts in a standard European backboxMatt finishesWhite WHBlack BLMetal finishesSatin Brass SBBright Brass BBBright Chrome BCAntique Brass QBAntique Bronze QZ Satin Chrome SCSatin Nickel SNBright Nickel BNClear Anod.Aluminium CLABlack Anod.Aluminium BLABrass Anod.Aluminium BRALutron 11
Lutron accessoriesDESCRIPTIONSQA-2Two button keypadFUNCTIONS Offers full-open and full-close Controls either a single EDU or a group ofEDUs operating together Offers full-open, full-close, and oneprogrammable preset position Controls either a single EDU or a group ofEDUs operating together Offers full-open, full-close, and raise/lower Controls either a single EDU or a group ofEDUs operating together Offers full-open, full-close, raise/lower andone programmable preset position Controls either a single EDU or a group ofEDUs operating togetherProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)SQA-3Three button keypadProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)SQA-2RTwo button keypadwith raise/lowerProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)SQA-3RThree button keypadwith raise/lowerProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)Matt finishesWhite WHBeige BEIvory IVGray GRBrown BRBlack BLMetal finishes 12 LutronSatin Brass SBBright Brass BBBright Chrome BCAntique Brass QBAntique Bronze QZ Satin Chrome SCSatin Nickel SNBright Nickel BNGold Plated AUClear Anod.Aluminium CLABlack Anod.Aluminium BLABrass Anod.Aluminium BRA
DESCRIPTIONSQA-4EFour button keypadwith raise/lower andinfrared receptionFUNCTIONS Offers full-open, full-close, raise/lower,infrared reception and two programmablepreset positions Controls either a single EDU or a group ofEDUs operating together Infrared receiver controls all, or a subset ofthe EDUs assigned to keypad Offers full-open, full-close, raise/lower andthree programmable preset positions Controls either a single EDU or a group ofEDUs operating togetherSQA-2DFour button keypadfor dual-mount or twogroup applications Offers full-open and full-close for twoseparate groups Controls either two single EDUs or twogroups of EDUs operating togetherProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”) Counts as one device on thecommunications linkSQA-3DSix button keypad fordual-mount or twogroup applications Offers full-open, full-close, and oneprogrammable preset position for twoseparate groups of EDUs Control either two single EDUs or twogroups of EDUs operating together Counts as one device on thecommunications linkSVQ-CCI-8Sivoia QEDTM keypadaccessory Offers full-open, full-close, and oneprogrammable preset position for twoseparate groups of EDUs.W: 13.34mm (5.25”)or 14.61mm (5.75”)with coverH: 26.04mm (10.25”)or 27.31mm (10.75”)with coverD:5.08mm (2.00”) Controls 1, 2 or 4 EDUs individually or1, 2 or 4 groups of EDUs Counts as one device on thecommunications linkProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)SQA-5RFive button keypadwith raise/lowerProduct dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)Product dimensionsW: 70mm (2.75”)H: 118mm (4.625”)D: 29mm (1.13”)FootnoteAll the above keypads are available in insert (I) and non-insert (N) styleand mount in Lutron -supplied backboxes.Lutron 13
Lutron handheld infrared remote controlsDESCRIPTIONSV-OCITOpen/closehandheld IRtransmitter Offers open/close and fine tuneraise/lower control Can control one EDU or a group of EDUsacting togetherProduct dimensionsW: 38mm (1.50”)H: 117.5mm (4.625”)D: 14.3mm (.5625”) Use with either the remote IR Eye (SV-IR-XX)or a keypad with an integral IR receiverSV-3PITThree presethandheld IRtransmitter Offers full-open, full-close, three programmablepresets and fine-tune raise/lower Can control one EDU or a group of EDUsacting togetherProduct dimensionsW: 38mm (1.50”)H: 168.3mm (6.625”)D: 22.3mm (0.875”) Can be used to program presets Use with either the remote IR Eye (SV-IR-XX)or a keypad with an integral IR receiverSV-4GD-OCITMulti-functionhandheld infraredtransmitter Designed specifically to offer both individualand group controls of blinds. Ideal for dualmount blinds to control both light filtering andblackout blinds on the same window Control up to four window groupings Use with either the remote IR Eye (SV-IR-XX)or a keypad with an integral IR receiver Controls both window treatments andlighting groups Ideal for home theatre and conferenceroom applications Access up to four lighting presets as well asturning lighting completely off Use with either the remote IR Eye (SV-IR-XX)or a keypad with an integral IR receiverSV-IR-XXRemote infrared eyefor Sivoia QEDTM Receives remote IR signal from any Sivoia QEDhandheld infrared remote controls Available in White (WH) and Royal Plum (RP)Product dimensionsW: 38mm (1.50”)H: 168.3mm (6.625”)D: 22.3mm (0.875”) Optional 3m extension cable available Use only one IR receiver per roomProduct dimensionsW: 38mm (1.50”)H: 168.3mm (6.625”)D: 22.3mm (0.875”)SV-4S2G-ITMulti-function lightsand window treatmenthandheld infraredtransmitterProduct dimensionsW: 38mm (1.50”)H: 168.3mm (6.625”)D: 22.3mm (0.875”) 14 LutronFUNCTIONS
Lutron integration accessoriesDESCRIPTIONHWI-Q96HWI-Q96interface forSivoia QED andHomeWorksTMFUNCTIONS Provides two-way communication betweenHomeWorks and Sivoia QED systems Compatible with 4 series and 8 seriesHomeWorks processors A low-voltage component that can placed inany HomeWorks HWI-LV17, HWI-LV24, orHWI-LV32 enclosures Operate all EDUs, groups of EDUs, or singleEDUs from HomeWorks keypads or RS-232port on HWI processor Provides two-way communicationbetween GRAFIK EyeTM 3000 or GRAFIK Eye4000 Sivoia QED system Allow one zone on the Grafik Eye main unitfor each SG-SVC Does not occupy a Grafik Eye main unitaddress or accessory control address Operates all Sivoia QED EDUs on thecommunication link Uses one of the eight blind control addressesSO-SVCGRAFIK Systemscontrol forSivoia QED Provides two-way communicationbetween GRAFIK 5000TM, GRAFIK 6000TM orGRAFIK 7000TM Sivoia QED system Occupies one address on wallstation linkProduct DimensionsW: 73mm (2.875”)H: 117.5mm (4.625”)D: 28.7mm (1.13”) Operates all Sivoia QED EDUs on thecommunication linkProduct dimensionsW: 79.4mm (3.125”)H: 142.2mm (5.60”)D: 50.8mm (2.00”)SG-SVCGRAFIK SystemsTMcontrol forSivoia QED1Product dimensionsW: 73mm (2.875”)H: 117.5mm (4.625”)D: 28.7mm (1.13”)1FootnoteAvailable in insert (I) and non-insert (N) style and mountin Lutron-supplied backboxes.1Lutron 15
Lutron Sivoia QEDTMpower panelLine voltagewiring terminalSivoia QED power panelSVQ-10-PNL-230Provides power and communication wiring for upto 10 Sivoia QED drives. Utilise a custom sevenconductor combination communication/powercable (SVQ-CBL-250) or specify separate powerand communication wiring. See the Sivoia QEDtechnical reference guide (p/n 367-592/EA).Power andcommunicationterminals for upto 10 EDUsTwo additionalcommunicationterminalsPanel shown with cover removedDimensionsA. 241.3mm (9.50")B. 261.6mm (10.30")C. 444.5mm (17.50")D. 99mm (3.90")ADBC 16 Lutron
Lutron wiring overviewSystem utilising Sivoia QED Power Panel Croller blindscontainingelectronicdrive units infrared remote(optional) AkeypadsPower/communicationspanel (optional)Communicates seamlesslywith Lutron lightingcontrol systemsEach panel provides powerfor up to 10 Sivoia QEDelectronic drive units (EDUs)Sivoia QED blinds mayalso be powered byindividual transformersLink up to 96 total devices(including EDUs, keypadsand CCIs)CCI (contact closure input)panels are available toconnect to outsidesystems such as BMS ortouchscreen systems.System utilising individual transformersElectronic drive unit (EDU)BBBAAA24 VACpower supplyEach powersone EDUseeTouchTM keypadControl one or a group of EDUs To next keypad orcontact closureinterface or EDUInfrared transmitterContact closure interfaceCommunicate with external systemsACommunications link4 conductorsBPower wires3 conductorsCSVQ-CBL-2507 conductorsLutron 17
Sivoia QED roller 64The Sivoia QED roller 64 system installsin a space 89mm (3.5") deep by 89mm(3.5") high. The maximum projection ofroll width from the wall is 84mm (3.3").This would represent a full 5.59 sq. m(64 square feet) of 0.94mm (.037")thick fabric.TM system dimensionsSivoia QED roller 64 systems can alsobe ceiling-mounted using the same,simple bracket system (see below).Lutron offers a 89mm x 89mm(3.5" x 3.5") head box.The Sivoia QED roller 64 system usesone simple set of brackets for anyinstallation (jamb, wall and ceiling).During installation, each side of theblind can be adjusted both horizontallyand vertically as well as in its projectionoff the wall (using spacers provided). 18 Lutron
Sivoia QED roller 64TMSpecify a curved fascia and top/backcover for jamb, wall, or ceilinginstallations and minimal presence inthe window frame. finishing accessoriesSimple, elegant end caps are availablefor the roller blind system for installationswhere the roller is visible.Square end caps are also available forblinds where head boxes are used andthe system is still visible.Install both a sheer and a blackout blind inone window using this dual mounted bracketsystem for Sivoia QED roller 64 blinds.When selecting the curved fascia(above, left), choose a finishingcurved end cap.Lutron 19
roller 100TM system dimensionsSystem dimensions roller 100The Sivoia QEDTM system requires minimal space andinstalls in one of four variations: ceiling mount, wallmount, jamb mount or dual mount.fabric edge19mm(0.75”)The roller 100 system utilises a 63.5mm (2.5”) rollertube to operate up to 10m2 (100 square feet) of fabric.systemedgefabric edgeindicatorSymmetrical light gaps 16mm (0.625”) minimum,19mm (0.75”) typical.Wall bracket detailsystem width19mm(0.75”)51mm (2.0”)fabric width76mm (3.0”)19mm (0.75”)51mm (2.0”)19mm(0.75”)76mm (3.0”)19mm (0.75”)Blind centring and levellingSivoia QED brackets employ a two-piece designto maximise ease and flexibility of installation.The bracket laterally adjusts the roller blind afterinstallation to ensure a centred installation.Roller blinds can also be levelled easily withoutre-mounting the bracket.Projection adjustmentThe Sivoia QED bracket allows for projection adjustmentof the roller tube during and after installation.Up to 13mm (0.50”) projection adjustmentprojectionadjustment 13mm (1/2”)adjust rollertube laterally tocentre blind 9.5mm (3/8”) 20 Lutronlevelling adjustment screw 9.5mm (3/8”)
roller 100 mounting bracketsBracket design benefits Proprietary bracket designs for various applications include:Wall mount (outside window frame)Jamb mount (inside window frame)Ceiling mount (inside window frame or in a pocket)Dual mount (two fabrics in one window)Ceiling mountDual mountA common roller blind application is the use of twofabrics on one window, typically a sheer and ablackout. Fabric unrolls closest to the glass.Wall mountJamb mountLutron 21
roller blind evaluate installationStep 1Access window opening:How will blind be installed External Internalwindow depthwindowheightStep 2frame widthIf external, recommended blind measurementSpecify system dimensionsMeasure widthMeasure heightBlind102mm ��)blindheightfabric widthWidthNote:Final measurements must be confirmed byinstaller at the job site before fabrication of rollerblinds. See technical reference guide for moreinformation (P/N 367-592/EA).Step 3Drive locationSpecify drive location for pre-wiringand roll of fabricDrive location detail Left Right To be determinedFabric roll detail Regular Reverse To be determinedLeft 22 LutronRight
External installation –above the windowA shallow window depthA narrow or non-existentwindow sashA valance, cornice or othertop treatmentSoffit, or other architecturaldetail to recess blind Internal installation –within the windowA window depth withat least 114mm (4.5”)A sash width of at least25mm (1.0”)If internal, recommended blind measurementMeasure heightMeasure widthbracket-to-bracketat roller tube locationFabric rollwindowRegularwindowReverseLutron 23
roller blind select productmaximum84mm (3.3”)Step 4Select operator andmounting conditionSivoia QED roller 64TM(windows up to2.44m wide x 2.44m high)Operator roller 64 roller 100Mounting condition Wall Ceiling Jamb DualWall mountSivoia QED roller 100TM(windows up to3.05m wide x 3.05m high)109mm(4.3”)127mm(5.0”)fabric projection adjustablefrom 30-43mm (1.2”-1.7”)note: shown as regular rollWall mountStep 5Select control optionsKeypadIR transmitterIR receiverSivoia QEDTM can be controlled by a wide range ofelegant keypads, hand-held remotes or by Lutron lighting controls for seamless integration to controlall the light in any space.See pg 10-15 for a full selection of Sivoia QED wallcontrols and interfaces for Lutron lighting control systemsIntegration HomeWorksTM GRAFIK EyeTM GRAFIK SystemsTMStep 6Work with your local fabricator to determine what otherspecifications are required including: fabric selection,weight capacity and compatibility, lineals or sidechannels for black-out installations, fascia, pockets, etc.All measurements must be confirmed by yourlocal fabricator. 24 Lutron
maximum76mm (3.0”)maximum84mm (3.3”)127mm (5.0”)178mm(7.0”)Jamb mountCeiling mount102mm (4.0”)84mm(3.31”)Dualmount178mm(7.0”)130mm (5.125”)4.2mm (0.165”)113mm )box notprovided119mm(4.69”)flap andhangerglass25mm (1.0”)Ceiling mountSQA-3RJamb mountSQE-3ENSV-OCITDual mountGRX-350XFor more information,please contact your localLutron fabricator.Lutron 25
curtain track system dimensionsStraight track mounting optionsSpecify left draw, right draw or centre draw curtain track systems.system width (application dependant)5.5m (18’ 0”) maximumLeft draw system212.7mm(8.375”)102mm (4.0”)Right draw systemCentre draw system 26 Lutron
curtain track capacityStraight track capacity – curtain sizeUse this chart to determine the maximum fabric size the Sivoia QEDTM curtain system can operate,based upon height and weight.Typical sheer curtainTypical blackout curtain with liningHeavy specialityfabricsHeight136g/m2 (4oz/yd2)Total fabric weight406g/m2 (12oz/yd2)Total fabric weight542g/m2 (16oz/yd2)Total fabric weight813g/m2 (24oz/yd2)Total fabric weight1.83m (72”)Up to 5.5m (18’) wUp to 5.5m (18’) wUp to 4.5m (15’) wUp to 3.6m (12’) w2.44m (96”)Up to 5.5m (18’) wUp to 5.5m (18’) wUp to 4.5m (15’) wUp to 2.1m (7’) w3.65m (144”)Up to 5.5m (18’) wUp to 4.2m (14’) wUp to 2.7m (9’) wN/AStraight track capacity – curtain weightUse this chart to determine the maximum fabric weight the Sivoia QED curtain system can operate,based upon system width.Single electronic drive systemWidth0.9-2.7m (3’-9’)3-3.9m (10’-13’)4.2-5.5m (14’-18’)Weight36.3 kg (80 lbs)31.8 kg (70 lbs)27.2 kg (60 lbs)Width1.8-5.5m (6’-18’)5.8-7.9m (19’-26’)8.2-11m (27’-36’)Weight for both panels72.6 kg (160 lbs)63.5 kg (140 lbs)54.4 kg (120 lbs)Split tandem systemLutron 27
curtain track system installationASingleDD139.7mm (5.5”)B 88.9mm (3.5”)C 50.8mm (2.0”)D 25.4mm (1.0”)ACBDualED50.8mm (2.0”)D 25.4mm (1.0”)E 235.0mm (9.25”)F 184.2mm (7.25”)CCFTandemSame dimensions assingle track systemCornerSame dimensions assingle track system 28 LutronD
curtain track installation and fabric assemblyWall mountCeiling mountSivoia QEDTM curtain track systems can be mounted to the wall or to the ceiling.Curtain hook assemblyFor best performance, a curtain hook setting of12.7mm (0.5”) should be used. This allows thesystem to operate with minimal noise.Lutron 29
curtain track systems how to specifyStep 1Specify curtain drawLeft draw Left draw Right draw Centre drawStep 2Specify track type Single Dual Tandem Dual/tandemSingleDualStep 3Specify drive locationLeftDrive location Left Right Left and rightStep 4Specify system dimensions and colourSystem widthSystem widthEstimated opening sizeApproximate stack backTrack colourBronzeClear anodisedWhiteNote:Final measurements must be confirmed at the job site beforefabrication of curtain track. See technical reference guide for moreinformation (P/N 367-592/EA).Step 5Select controlKeypadIR transmitterIR receiverStep 6 30 LutronIntegration HomeWorksTM GRAFIK EyeTM GRAFIK SystemsTMSivoia QEDTM can be controlled by a wide range ofelegant seeTouchTM keypads, hand-held remotes or byLutron lighting controls for seamless integration tocontrol all the light in any space.See pg 10-15 for a full selection of Sivoia QED wallcontrols and interfaces for Lutron lighting control systemsWork with your local fabricator to determine what other specificationsare required including: fabric selection, weight capacity and compatibility,lineals or side channels for black-out installations, fascia, pockets, etc.All measurements must be confirmed by your local fabricator.
Centre drawRight drawTandemDual / tandemRightSystem widthStack backLeft and rightSystem widthStack backOne way draw(left or right stack available)SQA-3RSQE-3ENSV-OCITStack backSplit drawGRX-350XFor more information,please contact yourlocal Lutron fabricator.Lutron 31
Worldwide headquartersLutron Electronics Co., Inc.7200 Suter RoadCoopersburg, PA 18036USATEL: 1-610-282-3800FAX: 1-610-282-1243intsales@lutron.comInternational officesBrazilLutron BZ do Brasil Ltda.AV. Brasil, 239Jardim AméricaSão Paulo - SPCEP: 01431-001BrazilTEL: 55-11-3885-5152China, BeijingLutron GL Ltd. BeijingRepresentative Office5th Floor, China Life BuildingNo. 16 Chaowai St.Chaoyang Distric
Precise movement All blinds in a Sivoia QED system will start, stop and move in unison and in precise alignment at all times for the life of the system System integration Lutron lighting controls, such as HomeWorks TM and GRAFIK Eye TM, seamlessly integrate with Lutron’s Sivoia QED window system
