WIXLIB

SLD seriesSurface LEDdownlightluminaire

A patented optical coupling process maximizes the amountof light injected into the WaveStream panel, dramaticallyimproving efficiency. Laser precise, patented AccuAimTMoptics arranged in exacting patterns provide unrivaledbrightness control while delivering optimal distributionstailored to each fixture and application.SLD SeriesSurface LED DownlightLuminaireHalo SLD Series Surface LED Downlight luminaires incorporateWaveStream LED technology to create an ultra-low profile,surface-mounting luminaire with the performance and look oftraditional downlights. The SLD Series 4" and 6" luminaires aredesigned for installation in many standard and fire-rated 3-1/2"and 4" electrical junction boxes, and may be retrofit in 4", 5", or6" aperture IC and Non-IC recessed housings. A dedicated LEDwiring connector meets high-efficacy code requirements inrecessed downlight housings and prevents substitution of lowerefficacy sources. Perfect for residential or commercial installationsand ideal for closets, storage areas, attics and basements. Forclosets, compliant with NFPA 70, NEC Section 410.16 (A)(3) and410.16 (C)(5). The SLD Series offers unparalleled design freedomwith mainstream value.

Patented AccuAimTM opticsHighly efficientluminous panelPreciselycontrolledlight outputOptimal LEDcouplingFeatures 4" and 6" ultra-low profile surface mountingWaveStream LED Technology- Downlight cone-of-light performance- AccuAim optics for directional controlUp to 800 lumens for both 4" SLD4 and 6" SLD62700K, 3000K, 3500K, and 4000K CCT80 CRI and 90 CRI optionsWattage: 12.0 W - 13.2 W, 120VDimmable to 5% with many 120V leading-edge and trailing-edgephase control dimmersInstalls in many 3-1/2" and 4" standard or fire-rated ceilingjunction boxesRetrofits 4", 5", or 6" recessed downlight housingscULus Listed for Halo housingsUL Classified for other housingsDamp Location Listed for wallsWet Location Listed for showers and outdoor protected ceilingsPlug-in LED connector for easy installation- Supply wire adapter connection, for junction box wiring*- Screwbase adapter for recessed housing retrofit**screwbase adapterwith LED connectorsupply wire adapterwith LED connector*LED connector on SLD meets CA Title 24** Retrofit only - not for CA Title 24Compliances90 CRI80 CRICan be used to comply with CaliforniaTitle 24 High Efficacy requirements.Certified to California Title 20Appliance Efficiency Database.Can be used to comply withCalifornia Title 24 Non-ResidentialLighting Controls requirementsas a LED Luminaire.Refer to ENERGY STAR Certified Products List.3

SLD4 4" LED Surface Downlight LuminaireSLD4 Designer Trims (Order Separately)SLD4TRMSNSatin NickelSLD4TRMTBZTuscan BronzeSLD4TRMWHWhite .7”[17.42mm]SLD4 Energy Data80 CRI90 CRILumens (4000K)800710Input Voltage120V120V50/60 Hz50/60 HzInput Current0.10 A0.10 AInput Power12.2 W12 W66 lm/W59 lm/WTHD 20% 20%Power Factor 0.90 0.90-30 - 40 C-30 - 40 CClass AClass AInput FrequencyEfficiency (4000K)T AmbientSound RatingOVER 460 SAVINGS* Based on average six hours use per day.Savings are over the life of the Halo SLD4 luminaire.Energy savings: 367 Replacement lamp savings: 95 Savings based on 0.155 per kilowatt hour, a verage six hours use per day, 50,000 hours of lamp usage, and 60W PAR16 Halogen lamp l umen equivalent. 4

SLD6 6" LED Surface Downlight LuminaireSLD6 Designer Trims (Order Separately)SLD6TRMSNSatin NickelSLD6TRMTBZTuscan BronzeSLD6TRMWHWhite 197.87mm].7”[17.28mm]SLD6 Energy Data80 CRI90 CRILumens (4000K)800780Input Voltage120V120V50/60 Hz50/60 HzInput FrequencyInput Current0.10 A0.11 AInput Power12.2 W13.2 W66 lm/W59 lm/WTHD 20% 20%Power Factor 0.90 0.90-30 - 40 C-30 - 40 CClass AClass AEfficiency (4000K)T AmbientSound RatingOVER 475**SAVINGS* Based on average six hours use per day.** Savings are over the life of the Halo SLD6 luminaire.Energy savings: 406 Replacement lamp savings: 77 Savings based on 0.155 per kilowatt hour, average six hours use per day,50,000 hours of lamp usage, and 65W BR30 lamp lumen equivalent.5

SLD Designer Trim RingsSLD trims provide the ultimate indesign freedom to match décorand interior fittings in a spacewith an offering of satinnickel and tuscan bronzeplated trims, plus awhite trim that maybe field painted priorto installation toan alternate colorchoice.White(Paintable)Satin NickelTuscanBronzeThe versatile SLD trims areoptional accessories that snapover the SLD. Note that use ofthe pre-installed thin film tapeon the back side of the trim isrequired to secure the trim andprevent rotation when installingthe SLD unit.6

Junction Box AccessoriesSpacer Extension RingThe spacer extension ring adds 15/16" depth when the SLD driver cannotfit into a junction box due to excess wire fill or other obstruction. Thespacer extension ring is also a problem solver for installations with shallowpancake boxes or plaster rings.ABCDSLD4EXT4" Surface LED Space T9.5”0.925”3.88”8”Standard J-boxStandard J-box with plaster ringSLD6EXT6" Surface LED Spacer RingShallow J-box (pancake)Surface Box AdapterThe surface box adapter allows the user to install the SLD to a junctionbox that is mounted flat on a ceiling or beam surface (not recessed in theceiling).SLD4RAD4" SLD Round Surface J-box AdapterFor 4" round and octagon junctionboxes.SLD6RAD6" SLD Round Surface J-box AdapterFor 4" round, octagon, and squarejunction boxes.(*use SLD6SADPLT for square J-box)*SLD6SADPLT6" SLD Square SurfaceJ-box Adapter Plate(use with SLD6RAD)7

Mounting ApplicationsBoxApplications - JunctionJunctionBoxConcreteFire-ratedShallow plenum?No problem.0.8"0.7"Halo SLD8

Insulation - batting or spray foamFramingJunction box mounting applications are generalized for illustrativeconcept only. These are not for construction or specification. Referto appropriate professional and code authority for specific box andinstallation requirements.The perfect solution where there is noplenum space for a recessed downlight.1-1/2"2-1/8"junction boxes3-1/2"2x49

Junction Box Mounting Ceiling or WallCompatible JunctionBox (by others)SLD6 JunctionBox InstallationJunction Box BracketSupply WireAdapterSLD6 with junction box bracket installed.Junction Box Mounting Summary1. Install junction box bracket.2. Unplug supply wire adapter from SLD. Connect black and whitewires from the supply wire adapter to house wiring (black to blackand white to white).3. Locate the supply wire adapter behind the junctionbox bracket.4. Plug matching orange LED connector from supply wire adapterto SLD.5. Align two bracket tabs with slots on back of SLD fixture.6. Turn clockwise to lock in place.Note that this is only a summary. Read and follow the instructionsincluded with the product for full details.10

Compatible JunctionBox (by others)SLD4 JunctionBox InstallationJunction Box BracketSupply WireAdapterSLD4 with junction box bracket installed.Slot-N-Lock Halo SLD proprietary Slot-N-Lock quickinstallation system with mountingbracket.11

Compatible Junction BoxesSLD6RADadapterSLD4RADadapterSLD6SLD4Standard and fire-ratedjunction boxes.*Octagon - steel light fixture/ fan box4" x 4" x 2-1/8"4" x 4" x 1-1/2"Square - steel deep box4" x 4" x 2-1/8"4" x 4" x 1-1/2"Round - new workfixture box (plastic)4" diameter x 2-3/16"3-1/2" diameter x 2-3/4"Round - old workfixture box (plastic)4-1/4" flange x 2-5/8",3-1/2" I.D.Round - new work fixturebox (plastic) with bar hanger4" diameter x 2-3/16"Round surface mount4" diameter x 1-1/2"TP316 - Eaton's Crouse-Hinds standard, fire-rated junction boxfor non-metallic cable4" x 4” x 2-1/8"TP317 - Eaton's Crouse-Hinds standard, fire-rated junction boxfor metal clad cable4" x 4" x 2-1/8"when used with SLD4RAD (SLD4) or SLD6RAD (SLD6)*This is a representative list of compatible junction boxes only. Information containedin this literature about other manufacturers’ products is from published informationmade available by the manufacturer and is deemed to be reliable, but has not beenverified. Eaton makes no specific recommendation on product selection and there areno warranties of performance or compatibility implied. Installer must determine thatsite conditions are suitable to allow proper installation of the SLD mounting bracketin the box.12

Recessed Housing MountingRetrofits 4", 5", or 6" recessed housings.1. Install screwbase adapter to fixture socket. (LED housingsskip Step 1)2. Attach torsion springs or friction clips to SLD following theinstructions included with the SLD.3. Install SLD into recessed can.Note that this is only a summary. Read the instructions includedwith the product for full details.ScrewbaseAdapterSLD4 Series Friction Clip Installation4-inch friction clipSLD6 Series Friction Clip Installation6-inch frictionclip position5-inch frictionclip positionSLD6 Series Torsion Spring Installation6-inch torsionspring position5-inch torsionspring position13

Ordering InformationSample Number: SLD405927WH SLD4TRMSNJunction Box Installation: Order junction box separately, as supplied by others, tocomplete installation.Recessed Installation: Order Halo recessed housing separately to complete installation.StandardModelsColorRenderingIndex (CRI)SLD405 4" Surface LED 8 80 CRIDownlight, 120V with9 90 CRIrecessed retrofit andjunction box hardware kitsColorRenderingIndex (CRI)"JB"ModelsSLD405 4" Surface LEDDownlight, 120V withjunction box hardwarekit only8 80 CRI9 90 CRIColorTemperature(CCT)27 2700K30 3000K35 3500K40 4000KFinishWH WhiteColorTemperature(CCT)27 2700K30 3000K35 3500K40 4000KFinishWH WhiteJBJB JunctionBox KitAccessories (Order Separately)Designer Trims: fit over the SLD4 for a designer finish, 6" O.D.SLD4TRMSN 4" SLD Satin Nickel Trim RingSLD4TRMTBZ 4" SLD Tuscan Bronze Trim RingSLD4TRMWH 4" SLD White Paintable Trim RingJ-box Spacer Extension Ring: add 15/16" depth when SLD driver cannot fit into installedjunction box, 7.75" O.D.SLD4EXT 4" Surface LED J-box ExtenderRAD Adapters: when junction box is mounted flat on a ceiling or beam surfaceSLD4RAD 4" SLD Round Surface J-box Adapter (compatible with 4" round and octagonjunction boxes)Spare PartsSLD4ACCKIT 4" Accessory Parts Replacement Kit (screwbase adapter, and friction blades)SLD4BRKT 4" Junction Box Bracket and ScrewsHousings - Halo and All-Pro UL Listed CompatibilityRecessed Can SizeCatalog NumberCompatible Halo LED Housings with LED Luminaire High-efficacyCompliant Connector (Meets CA Title 24 requirements)4"H995ICAT, H995RICATCompatible Halo Incandescent E26 Screwbase Housings4"H99ICAT, H99TAT, H99RTATCompatible All-Pro Incandescent E26 Screwbase Housings4"EI400ATSB, ET400ATSB, ET400RATSBThe SLD Series surface LED downlight luminaire is cULus Listed or UL Classified foruse with any 4” (SLD4) or 5”/6” (SLD6) diameter recessed housings constructed ofsteel or aluminum with an internal volume that exceeds 62.3 in3 (SLD4) or 107.9 in3(SLD6) in addition to those noted above.14