Transcription
HALODESCRIPTIONTypeCatalog #The Halo Surface LED Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire withthe performance and look of a traditional downlight. SLD6 is designedfor installation in many standard and fire-rated 3-1/2” and 4” square,octagon or round junction boxes. And may also retrofit in 5” and 6” ICand Non-IC recessed housings.* Suitable for residential or commercialinstallations. Ideal for closets, storage areas, attics and basements.Compliant with NFPA 70, NEC Section 410.16 (A)(3) and 410.16 (C)(5).ProjectDateCommentsPrepared bySPECIFICATION K3500KRefer to ENERGY STAR Certified Products List.4000KCan be used to comply with California Title 24 Non-ResidentialLighting Controls requirements4000K as a LED Luminaire.2700K90CRI3000KLED3500K4000KRefer to ENERGY STAR Certified Products List.Can be used to comply with California Title 24 High Efficacy requirements.Certified to California Title 20 Appliance Efficiency Database.4000K4000K90CRI4000K2700K, 3000K, 3500K,and 4000Knominal6” Surface LEDDownlightSuitable forceiling or wallelectrical junction boxesSuitable for5” & 6” recessedhousing retrofit(IC, Non-IC & AIR-TITE )E N E R G Y CRI80CRI2700K, 3000K, 3500K,and 4000K90 4000K90 2700Knominal CCTnominal CCTCRI3000K90 3500KCRI802700KCRI4000K3500K3000KnominalCRI90 3500K nominal CCTnominal CCT2700K2700K3000KCRI2700K90 2700KCRI80 4000K4000K3500KCRI3000K80 3500KSLD 600 SeriesSLD6068xxWH80 4000KELECTRICAL CONNECTIONSJ u n c t i o n B oxnominal Compatible with 3-1/2” x 2” and4” x 1-1/2” deep round, squareand octagon boxes (2-1/8” deepboxes recommended) Supply Wire Adapter with LEDquick connector includedRecessed Housings LED connector is compatible withHalo 5”H550 Series and 6” H750nominalSeries LED Housings LED Connector meets CaliforniaTitle-24 high-efficacy luminairestandard as a non-screw base The included E26 Edisonscrew-base adapter providescapability for retrofitnominal LED connector is a nonscrewbase luminaire disconnectfor tool-less installation3000K4000K3500KCRIELECTRICAL JUNCTION BOXMOUNTING SLD may be used in compatibleelectrical junction boxes in directcontact with insulation includingnominalLEDspray foam insulation Trilateral linear LED assembly is Suitable for installation in manyintegrated in trim perimeterstandard and fire-rated 3-1/2” and Color Temperature: 2700K, 3000K,4” square, octagon, and round3500K, 4000Kelectrical junction boxes CRI options: 80 and 90Note: Driver consumes 3 cubic- 90 CRI can be used forinches of junction boxCalifornia Title 24 compliance/ Surface mounting in a fire-ratedcertified to Title 20nominalelectrical box offersa cost- 80 CRI can be used to complyeffective alternative to fire-ratedwith California Title 24 Nonrecessed housingsResidential Lighting ControlsNote: Fire-rating is per listing ofas a LED luminaire.the junction90CRIbox, not the SLD. L70 at 50,000 hours projectedLED Installer must ensurein accordance with TM-21compatibility of fit, wiringandRefer to ENERGY STAR Certified Products List.be used to comply with California Title 24 High Efficacy requirements.proper mounting in theCannominalelectrical junction box. CertifiedThis to California Title 20 Appliance Efficiency Database.includes all applicable nationaland local electrical and buildingcodes4000K3500K3000K2700KnominalLED CHROMATICITY A tight chromaticity specificationensures LED color uniformity,sustainable Color RenderingIndex (CRI) and CorrelatedColor Temperature (CCT) overthe useful life of the LED LED chromaticity of 3 SDCMexceeds ENERGY STAR color standards per ANSI. 90 CRI model features high colorperformance with R9 greater than50 Every Halo LED is quality tested,measured, and serialized in apermanent record to registerlumens, wattage, CRI and CCT. Halo LED serialized testing andnominalmeasurementensures colorand lumen consistency on aper-unit basis, and validateslong-term product consistencyover time80 3500K2700K2700K3000KCRI2700K80 2700KRECESSED HOUSING MOUNTING May be installed in IC recessedhousings in direct contact withinsulation* Note: Not for use in recessedhousings in direct contact withspray foam insulation. Refer toNEMA LSD 57-2013To r s i o n S p ri n g 5 ” & 6 ” Optional precision formed torsionspring bracket kit is included The torsion springs adjust on theframe to fit 5” or 6” compatiblehousingsF ri c t i o n B l a d e 5 ” & 6 ” Optional precision formed frictionblades included For retrofit in 5” and 6” housingswithout torsion spring mountingtabs Friction blade design allows theSLD to be installed in any positionwithin the housing aperture (360degrees)3000KDESIGNER TRIMSAccessories (sold separately)SLD designer trims are accessoryrings that attach to the SLD for apermanent finish. Refer to SLDaccessories specification sheet fordetails. White (Paintable) nominal Satin Nickel Tuscan BronzeWARRANTYCooper Lighting provides a fiveyear limited warranty on the SLDLED2700KOPTICS WaveStream technologyprovides uniform luminancefrom a low profile flat lens AccuAim optics providedirectional control for the“cone-of-light” beam distributionof a traditional downlight. Precision molded lens featureshigh transmission polymer withUV stabilized protecting film Proprietary Slot-N-Lock quickinstallation system for junctionbox installation T-bracket with Slot-N-Lockmounting tabs included2700KCONSTRUCTION Die cast aluminum trim ring, anddie formed aluminum frameLumens(4000K models)Input VoltageFrequency80 CRI90 CRI800780120V120V50/60 Hz50/60 HzInput Current0.10 A0.11 AInput Power12.2 W13.2 W66 lm/W59 lm/WEfficiency(4000K models)THD 20%Power Factor 0.90T Ambient-30 - 40 CSound RatingClass ANOMENCLATURES L D 606 8 30 WH606 6” SLD 600 Series8 80 CRI30 3000KWH Matte WhiteADV142256May 7, 2015 3:27 PM
SLD6068xxWHSLD6069xxWHCOMPLIANCE cULus Listed ceiling and wall cULus Damp Location listedceiling and wall cULus Wet Location Listed, ceilingonly (shower rated) Suitable for use in closets,compliant with NFPA 70, NEC Section 410.16 (A)(3) and 410.16(C)(5) SLD may be used in compatibleelectrical junction boxes in directcontact with insulation includingDIMMINGspray foam insulation Designed for continuous dimming May be installed in IC recessedcapability to nominally 5% withhousings in direct contact withmany 120V Leading Edge (LE)insulation (Not for use in recessedand Trailing Edge (TE) phasehousings in direct contact withcontrol dimmers. Dimming to 5%spray foam insulation. Refer tois best assured using dimmersNEMA LSD 57-2013)with low end trim adjustment. UL Classified when used inConsult dimmer manufacturer forretrofit with listed housingscompatibility and conditions of(See Housing Compatibility)use. (Note some dimmers require EMI/RFI: meets FCC 47CFR Part 15a neutral in the wallbox.)Class B limits, and is suitable foruse in residential and commercialinstallationsLED DRIVER Driver is a 120V input, highefficiency, dimmable electronicpower supply providing DCpower to the LED array Driver features high powerfactor, low THD, and has integralthermal protection in the eventof over temperature or internalfailure Driver is replaceable if it shouldbe required Airtight certified per ASTM E283(not exceeding 2.0 CFM under 57Pascals pressure difference) 90 CRI: Can be used to complywith California Title 24 HighEfficacy requirements. Certifiedto California Title 20 ApplianceEfficiency Database. 80 CRI: Can be used to complywith California Title 24 NonResidential Lighting Controlsrequirements as a LED luminaire. Can be used for InternationalEnergy Conservation Code (IECC)and Washington State EnergyCode high efficiency luminairecompliance ENERGY STAR certifiedluminaire - consult ENERGYSTAR Certified Product List Contains no mercury or lead andRoHS compliant. Photometric testing in accordancewith IES LM-79 Lumen maintenance projectionsin accordance with IES LM-80 andTM-21SLD 600 SeriesSLD6068xxWH80CRI2700K, 3000K, 3500K,and 4000KSLD6069xxWH90CRI2700K, 3000K, 3500K,and 4000K6” Surface LEDDownlightDIMENSIONSSuitable forceiling or wallelectrical junction boxes7.79”[197.87mm].8”[21.46mm]Suitable for5” & 6” recessedhousing retrofit(IC, Non-IC & AIR-TITE )7.79”[197.87mm].7”[17.28mm]OR DE R ING INFORMAT I O NSAMPLE NUMBER: SLD606927WH SLD6TRMSNJunction Box Installation: Order junction box separately, as supplied by others, to complete installation.Recessed Installation: Order Halo recessed housing separately to complete installation.ModelsColor Rendering IndexColor Temperature (CCT)FinishAccessoriesSLD606 6” Surface LED Downlight, 120V600 Series8 80 CRI9 90 CRI27 2700K30 3000K35 3500K40 4000KWH WhiteDesigner TrimsFit over the SLD for a designer finishSLD6TRMSN 6” SLD Satin NickelSLD6TRMTBZ 6” SLD Tuscan BronzeSLD6TRMWH 6” SLD White (paintable)J-Box Spacer Extension RingAdd 15/16” depth when SLD driver cannot fit into installed junctionboxSLD6EXT 6” Surface LED J-Box Extender, 9.5” O.D.RAD AdaptersWhen junction box is mounted flat on a ceiling or beam surface(not recessed in ceiling)SLD6RAD 6” SLD Round Surface J-Box Adapter, 7.92” O.D.(for 4-inch round or octagon junction boxes.)SLD6SADPLT 6” SLD Square Surface J-Box Adapter Plate(For 4-inch square junction boxes, use with SLD6RAD.)Spare PartsSLD6ACCKIT 6” Accessory Parts Replacement Kit(Screwbase adapter, torsion springs, friction blades)SLD6BRKT 6” Junction Box Bracket & ScrewsRefer to SLD Accessories specification sheet for further information.
SLD6068xxWHSLD6069xxWHHOUSING COMPATIBILITYThe SLD6 is UL Listed in Halo and All-Pro recessed housings, and is UL Classified for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with aninternal volume that exceeds 107.9 in³ in addition to those noted below.Note: Some other’s housings require installation with included friction clips.Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant)HALOLEDRecessed Can Size Catalog Number5"6"H550ICAT, H550RICATH750ICAT, H750RICAT, H750T, H750RINTD010, H750TCP, H2750ICATHalo LED Retrofit EnclosuresHALO6"ML7BXRFK, ML7E26RFKCompatible Halo Incandescent E26 Screwbase HousingsHALO5"6"H5ICAT, H5RICAT, H5T, H5RT, H5TM, H25ICATH7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICT, H7UICAT, H27ICAT, H27RICAT,H27ICT, H27RICT, H27T, H27RTCompatible All-Pro Incandescent E26 Screwbase HousingsALL-PRO5"6"EI500AT, EI500RAT, ET500, ET500REI700AT, EI700RAT, EI700, EI700R, EI700ATNB, EI700NB, EI700U, EI700UAT, ET700, ET700R, EI2700AT, EI2700,EI2700R, ET2700, ET2700R
SLD6068xxWHSLD6069xxWHCOMPATIBLE WITH EATON’S CROUSE-HINDS STANDARD / FIRE-RATED JUNCTION BOXESTP316for non-metallic cable4” x 4” x 2-1/8”(102mm x 102mm x 54mm)TP317for metal clad cable4” x 4” x 2-1/8”(102mm x 102mm x 54mm) TP316 - for non-metallic cable TP317 - for metal clad cable UL Listed Two-hour fire-rated ANSI/UL 263 Refer to www.crouse-hinds.comCOMPATIBLE WITH MANY OTHER STANDARD AND FIRE-RATED JUNCTION BOXES*4" octagon light fixture/fansteel box4" x 4" x 2-1/8"(102mm x 102mm x 54mm)4" octagon steel box4" x 4" x 1-1/2"(102mm x 102mm x 38mm)4" round new worknon-metallic light fixture/fan box4" diameter x 2-3/16"(102mm x 56mm)3-1/2" round new worknon-metallic ceiling box3-1/2" diameter x 2-3/4"(89mm x 70mm)4" square deep steel box4" x 4" x 2-1/8"(102mm x 102mm x 54mm)3-1/2" round old worknon-metallic box4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8”(108mm O.D., 89mm I.D. x 67mm)4" square standardsteel box4" x 4" x 1-1/2"(102mm x 102mm x 38mm)4” round surface mount box4" diameter x 1-1/2”(102mm x 38mm)Requires SLD6RAD adapter4" round new work non-metallic boxwith hanger bar assembly4" diameter x 2-3/16" (102mm x 56mm)*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products isfrom published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Eaton makes no specificrecommendation on product selection and there are no warranties of performance or compatibility implied. Installer must determine that site conditionsare suitable to allow proper installation of the SLD mounting bracket in the box.
SLD6068xxWHSLD6069xxWHPRODUCT DATACat No.CRICCTLumensPower 2400078013.259Performance values are presented as typical for the model(s) indicated. Field results may vary.LIGHTING FACTS SLD606827WH - 80 CRISLD606830WH - 80 CRISLD606835WH - 80 CRISLD606840WH - 80 CRISLD606927WH - 90 CRISLD606930WH - 90 CRISLD606935WH - 90 CRISLD606940WH - 90 CRIEaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.comEaton’s Cooper Lighting Business1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.comSpecifications anddimensions subject tochange without notice.
California Title 24 compliance/ certified to Title 20 - 80 CRI can be used to comply with California Title 24 Non- Residential Lighting Controls as a LED luminaire. L70 at 50,000 hours projected Input Voltage in accordance with TM-21 WARRANTY Cooper Lighting provides a f
