Transcription
ASME Boiler andPressure Vessel CodeAn International Code2015MATERI ALSFer rou s M aterial Sp eci fi cat i o ns(Beg in n in g to SA -4 50)This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SECTION IIPa r t ACopyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).ASME B PVC.I I .A-2015No fu
2015 ASME Boiler &Pressure Vessel Code2015 EditionJuly 1, 2015IIPart AFerrous MaterialSpecifications(Beginning to SA-450)ASME Boiler and Pressure Vessel Committeeon MaterialsTwo Park Avenue New York, NY 10016 USAThis copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.MATERIALSCopyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).AN INTERNATIONAL CODENo fu
This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard. The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, andthe public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard areexpressly advised that determination of the validity of any such patent rights, and the risk of infringement of suchrights, is entirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document (if any) are part of this American National Standard.ASME collective membership markCertification Mark“ASME” is the trademark of The American Society of Mechanical Engineers.The Specifications published and copyrighted by the American Society for Testing and Materialsare reproduced with the Society’s permission.No part of this document may be reproduced in any form, in an electronicretrieval system or otherwise, without the prior written permission of thepublisher.Library of Congress Catalog Card Number: 56-3934Printed in the United States of AmericaAdopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015.The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2015 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedThis copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.The above ASME symbol is registered in the U.S. Patent Office.Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).Date of Issuance: July 1, 2015No fu
291295299303307This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising . . . . . . . . . .Statement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . .Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . .Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASTM Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specifications Listed by Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . .SA-6/SA-6MSpecification for General Requirements for Rolled Structural Steel Bars,Plates, Shapes, and Sheet Piling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-20/SA-20MSpecification for General Requirements for Steel Plates for Pressure VesselsSA-29/SA-29MSpecification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-31Specification for Steel Rivets and Bars for Rivets, Pressure Vessels . . . . . . .SA-36/SA-36MSpecification for Carbon Structural Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-47/SA-47MSpecification for Ferritic Malleable Iron Castings . . . . . . . . . . . . . . . . . . . . . .SA-53/SA-53MSpecification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded andSeamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-105/SA-105MSpecification for Carbon Steel Forgings, for Piping Applications . . . . . . . . . .SA-106/SA-106MSpecification for Seamless Carbon Steel Pipe for High-Temperature ServiceSA-134Specification for Pipe, Steel, Electric-Fusion (ARC)-Welded (Sizes NPS 16 andOver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-135Specification for Electric-Resistance-Welded Steel Pipe . . . . . . . . . . . . . . . . .SA-178/SA-178MSpecification for Electric-Resistance-Welded Carbon Steel and CarbonManganese Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . .SA-179/SA-179MSpecification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-181/SA-181MSpecification for Carbon Steel Forgings, for General-Purpose Piping . . . . . .SA-182/SA-182MSpecification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges,Forged Fittings, and Valves and Parts for High-Temperature Service . . .SA-192/SA-192MSpecification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-193/SA-193MSpecification for Alloy-Steel and Stainless Steel Bolting for High-Temperatureor High Pressure Service and Other Special Purpose Applications . . . . . .SA-194/SA-194MSpecification for Carbon and Alloy Steel Nuts for Bolts for High Pressure orHigh Temperature Service, or Both . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-202/SA-202MSpecification for Pressure Vessel Plates, Alloy Steel, Chromium-ManganeseSilicon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-203/SA-203MSpecification for Pressure Vessel Plates, Alloy Steel, Nickel . . . . . . . . . . . . .SA-204/SA-204MSpecification for Pressure Vessel Plates, Alloy Steel, Molybdenum . . . . . . . .SA-209/SA-209MSpecification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-210/SA-210MSpecification for Seamless Medium-Carbon Steel Boiler and SuperheaterTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).TABLE OF CONTENTSNo fu
93501511523535551561573This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-283/SA-283MSA-285/SA-285MSpecification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Carbon, Suitable for Fusion Welding forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Martensitic Stainless and Alloy, forPressure-Containing Parts, Suitable for High-Temperature Service . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-VanadiumNickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Spring Wire . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireSpecification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forModerate and High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,and Strip for Pressure Vessels and for General Applications . . . . . . . . . . .Specification for Welded Austenitic Steel Boiler, Superheater,Heat-Exchanger, and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium Steel-Clad Plate . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium-Nickel Steel-Clad Plate . . . . . . . . . . . .Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate . . . . . . . . . .Specification for Carbon Steel Forgings for Pressure Vessel Components . .Specification for Seamless and Welded Ferritic and Martensitic Stainless SteelTubing for General Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Steel Bars and Shapes . . . . . . . . . . . . . . . . . . . . . .Specification for Gray Iron Castings for Pressure Containing Parts for Temperatures up to 650 F (350 C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesSpecification for Pressure Vessel Plates, Carbon Steel, Low- andIntermediate-Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenumand Manganese-Molybdenum-Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthSpecification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject toMechanical Property Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless, Welded, and Heavily Cold Worked AusteniticStainless Steel Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy-Steel and Stainless Steel Bolting for Low-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi MinimumTensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Steel Pipe for Low-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Carbon and Alloy-Steel Tubes forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Ferritic Alloy-Steel Pipe for High-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy Steel Forgings for Pressure and High-TemperatureParts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon and Low-Alloy Steel Forgings, Requiring NotchToughness Testing for Piping Components . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), forPressure-Containing Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).SA-213/SA-213MNo fu
13817825835863877883895921This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-449Specification for Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized andTempered 9% Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and OtherExternally Threaded Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications .Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Test Methods and Definitions for Mechanical Testing of Steel Products . . .Specification for Carbon and Alloy Steel Forgings for Thin-Walled PressureVessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Austenitic Steel Pipe for High-TemperatureCentral-Station Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, ChromiumMolybdenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use atElevated Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Wrought Austenitic Stainless Steel Piping Fittings . . . . . . .Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosiveor High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel, Sheet, Carbon, for Pressure Vessels . . . . . . . . . . . . . .Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes . . . .Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Straight-Beam Ultrasonic Examination of Steel Plates . . . .Specification for Stainless and Alloy-Steel Turbine-Type Bolting SpeciallyHeat Treated for High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . .Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,120/105/90 ksi Minimum Tensile Strength, General Use . . . . . . . . . . . . .Specification for General Requirements for Carbon and Low Alloy SteelTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Centrifugally Cast Austenitic Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for High-Temperature Bolting, With Expansion CoefficientsComparable to Austenitic Stainless Steels . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Ductile Iron Castings for Paper Mill Dryer Rolls . . . . . . . .Specification for Stainless Steel Bars and Shapes for Use in Boilers and OtherPressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for General Requirements for Flat-Rolled Stainless andHeat-Resisting Steel Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . .Specification for General Requirements for Stainless Steel Bars, Billets, andForgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings Suitable for Pressure Service . . . . . . . . . . . .Specification for Quenched and Tempered Vacuum-Treated Carbon and AlloySteel Forgings for Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- andHigher-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).SA-352/SA-352MNo fu
145115111571163This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-563SA-564/SA-564MSpecification for Pressure Vessel Plates, Carbon Steel, for Moderate- andLower-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenchedand Tempered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service . . . . . . . . . . . . . . . .Specification for Seamless Carbon Steel Pipe for Atmospheric and LowerTemperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for General Requirements for Specialized Carbon and AlloySteel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,Manganese-Molybdenum and Manganese-Molybdenum-Nickel . . . . . . . .Specification for Pressure Vessel Plates, Heat-Treated, Carbon-ManganeseSilicon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy-Steel Bolting for Special Applications . . . . . . . . . . . .Specification for Quenched and Tempered Carbon and Alloy Steel Forgingsfor Pressure Vessel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Quenchedand-Tempered, Chromium-Molybdenum and Chromium-MolybdenumVanadium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,Nickel-Chromium-Molybdenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered8 and 9% Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Cold-Drawn Carbon Steel Feedwater HeaterTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Carbon Steel Feedwater HeaterTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titaniumfor Glass or Diffused Metallic Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon and Alloy Steel Nuts . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless SteelBars and Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel, Sheet, Carbon, Structural, and High-Strength, LowAlloy, Hot-Rolled and Cold-Rolled, General Requirements for . . . . . . . . . .Specification for High-Strength Low-Alloy Columbium-Vanadium StructuralSteel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy Steel Socket-Head Cap Screws . . . . . . . . . . . . . . . . . .Specification for Ultrasonic Angle-Beam Examination of Steel Plates . . . . .Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Platesfor Special Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for theChemical Industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for High-Strength Quenched and Tempered Low-Alloy SteelForged Fittings and Parts for Pressure Vessels . . . . . . . . . . . . . . . . . . . . . .Specification for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel,Ultrasonic Examination Thereof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, High Strength, forModerate and Lower Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, 5% and 51/2% Nickel Alloy Steels,Specially Heat Treated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Forged Steel Rolls, Used for Corrugating Paper MachinerySpecification for Hot-Rolled Structural Steel, High-Strength Low-Alloy PlateWith Improved Formability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).SA-516/SA-516MNo fu
51363137313791399This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-731/SA-731MSpecification for Centrifugally Cast Carbon Steel Pipe for High-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, forModerate and Lower Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet,Strip, Plate, and Flat Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron)Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric andLower Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Serviceat Moderate Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, MechanicalProperties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Austenitic Stainless Steel FeedwaterHeater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded forHigh-Pressure Service at High Temperatures . . . . . . . . . . . . . . . . . . . . . . .Specification for Precipitation-Hardening Stainless and Heat-Resisting SteelPlate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, SpecialQuality, for Pressure Piping Components . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, General Requirements, for PressureContaining Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Age-Hardening Stainless Steel Forgings . . . . . . . . . . . . . . .Specification for Alloy Steel Forgings for High-Strength Pressure ComponentApplication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel,Quenched and Tempered, for Welded Pressure Vessels . . . . . . . . . . . . . . .Specification for Carbon Steel Forgings for Piping Components with InherentNotch Toughness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless, Welded Ferritic, and Martensitic Stainless SteelPipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening NickelCooper-Chromium-Molybdenum-Columbium Alloy Steel . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, High-Strength Low-Alloy Steel . . .Specification for Pressure Vessel Plates, Heat-Treated, Carbon-ManganeseSilicon Steel, for Moderate and Lower Temperature Service . . . . . . . . . . .Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature orPressure-Containing Parts, or Both . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Practice for Ultrasonic Examination of Austenitic Steel Forgings . . . . . . . . .Specification for Steel Castings, Stainless, Precipitation Hard
Part A Ferrous Material Specifications (Beginning to SA-450) SECTION II MATERIALS ASME BPVC.II.A-2015 2015A
