Transcription
MOUNTS & ACCESSORIES
Cisco Webex MountsCisco Webex Board Mounting KitThe Cisco Webex Board Mounting Kit is designed specifically for the 55-inch,70-inch or 85-inch Webex Board. The mounting kit makes it easy to installthe Webex Board on the wall, or the mounting kit for the 55-inch and 70-inchWebex Board may replace the universal display mount on any AVTEQ mobilecart, stand or credenzas.In addition, Webex Mounting Kit for the 55-inch and 70-inch Webex Board isintegrated with select products and is available on AVTEQ’s height adjustableDynamiQTM 400 mount.PART NUMBERSWEBEX BOARDDIMENSIONSCSB-MOUNT55-inch28″H x 48″W x 1″DCSB-MOUNT-7070-inch28″H x 62″W x 1″DCSB-MOUNT-8585-inch43.31″H x 73.86″W x 8.35″DCSB-MOUNTCSB-MOUNT-70CSB-MOUNT-85Cisco Webex Room Kit MountsRoom Kit Mounts are designed to install any Cisco Webex Room Kit unit aboveor below a display on AVTEQ’s display mounts, mobile stands and wall-mountedstands.Available as a standalone bracket, or bundled with the AVTEQ UM-1 universaldisplay mount for a single display up to 90″.PART NUMBERSWEBEX ROOM KITPOSITIONCRK-ABVRoom Kit /PlusAboveCRK-BLWRoom Kit /PlusBelowCRK-MINIRoom Kit MiniAbove/belowCRK-ABV-BUNDLEIncludes UM-1 display mountAboveCRK-BLW-BUNDLEIncludes UM-1 display mountBelowCRK-MINI-BUNDLEIncludes UM-1 display mountAbove or belowCisco Webex DX80 Mount AdapterThe DX80-ADAPTER provides an easy mounting system for the Cisco WebexDX80 on AVTEQ’s VESA mount, or it can bolt to any 100 100 or 75 75 VESAmount. The DX80-ADAPTER offers a secure mounting solution for the 23″ touchpanel display, allowing the Webex DX80 to be installed on mobile carts, such asour TMP-200.PART NUMBERSDIMENSIONSDX80-ADAPTER4.44″H x 11″W x 1.07″D2CRK-ABVCRK-MINICRK-BLW-BUNDLE
Cisco Wall MountsCisco Touch 10 Panel In-Wall MountThe C10-WMP wall mount is designed specifically for the Cisco Touch 10 controlpanel. The in-wall box allows for a flush mounting of the Cisco unit for post orpre-construction.PART NUMBERDIMENSIONSC10-WMP15.25″W x 12″ H x 1.8″DCisco TelePresence SX20 Wall MountThe SX20-WM is a mounting kit for Cisco’s TelePresence SX20. It has a sleekglossy black powder coat finish, three-sided venting and cable managementcover.PART NUMBERDIMENSIONSSX20-WM12″W x 7.25″ H x 1.62″DPoly Wall MountsPolycom RealPresence Touch Interface Panel Wall MountThe P10-WMP wall mount is specifically designed for the Poly RealPresenceTouch Interface panel. The in-wall box allows for a flush mounting of the Polyunit for post or pre-construction. The P10-WMP unit is available in glossy whitefinish.PART NUMBERDIMENSIONS WALL BOXDIMENSIONS FRONT PLATEP10-WMP11.179″W x 9.75″H x 2.125″D3.25″W x 10.25″H x 1″DPolycom Group Series 300/500 Wall MountThe GROUP-WM wall mounting kit is specifically designed for Poly’s GroupSeries 300/500. It has a sleek glossy black powder coat finish, three-sidedventing and cable management cover.PART NUMBERDIMENSIONSGROUP-WM11″W x 5″ H x 1.4″D3
Cisco , Poly & LifeSize AccessoriesCamera ShelvesThe optional Camera Shelves support the Polycom Eagle Eye, Cisco PrecisionHD or LifeSize HD videoconferencing cameras. Mounts to a single gang or dual gang wall box or straight to wall5 degree tilt on camera platformGloss black finishPART NUMBERSWALL BOXCAMERA TYPECS-1G-TBPLCMSingle gangCisco Precision HD orCS-2G-TBPLCMDual gangPolycom Eagle Eye camerasCS-1G-LSSingle gangCS-2G-LSDual gangLifesize cameraWMS-EEDCS-1G-LSWMS-EEDPolycom Eagle Eye DirectorCodec Rack ShelfOur Custom Rack Sheves for LifeSize and Poly codecs are compatible withthe RPS-1000SE, RPS-1000LE, RPS-800L/S and the GMP series.PART NUMBERSCODECCRS-PLCM-G500Polycom Group 300/500CRS-LS-TEAMLifesize Team 220/200CRS-LS-ROOMLifesize Room 220/200CRS-LS-ICONLifesize Icon 600CRS-PLCM-G500CRS-LS-TEAMCRS-LS-ROOMPolycom Studio Mount BracketThe POLY-STUDIO-BRK is designed to install the Polycom Studio USB video barabove or below a display on AVTEQ’s display mounts, mobile stands and wallmounted stands.PART NUMBERSDIMENSIONSPOLY-STUDIO-BRK14.93″H x 6″W x 0.60″DLifesize Icon 300TM Mount BracketThe LS-ICON300-BRK is designed to install the Lifesize Icon 300TM videocamera above or below a display on AVTEQ’s display mounts, mobile standsand wall-mounted stands.PART NUMBERSDIMENSIONSLS-ICON300-BRK9.85″H x 6″W x 0.60″D4
Display MountsUniversal Display MountThe adjustable Universal Display Mount is a low-profile wall mount designedfor a single display up to 90” or dual 70” displays. The low-profile designsecurely mounts the display(s) 2” from the wall andoffers a 15 degree titling option.PART NUMBERSDISPLAY SIZEUM-1Single display up to 90″UM-1TUM-2Single display up to 70”400 x 400 VESA maxTILTDIMENSIONS15-degree27″W x 9″H x 1″DUM-1UM-1TDual displays up to 70″UM-2Wall Display MountsPS-100 display mount is designed to mount video conferencing equipmentand either a single or dual flat screens to the wall. The PS-100 includes topor adjustable centered camera shelf and a bottom codec shelf.PART NUMBERSCODECPS-100S90” single displayPS-100L80” dual displaysPS-100-CTR80” dual displays, adjustable center camera shelfPS-100SPS-100LPS-100L-CTRLow-Profile Wall Display MountThe LED-1 is a low-profile wall mount LED single displays from 40″ to 70″.Mounting system includes a bubble level for best installation results.Mounting hardware included.PART NUMBERDIMENSIONSLED-136″W x 8″H x 0.5″DDisplay Mount AccessorySecurely mount a single display up to 65” or dual 55” displays on an AVTEQcart or an existing piece of furniture without using the screen manufacturer’sstand. Includes an integrated adjustable height camera shelf and two singlegang knockouts on sides.PART NUMBERDIMENSIONSTT-127.5″H x 32″W x 10″DTT-227.5″H x 78″W x 10″DTT-1TT-25
Height Adjustable Display MountsDynamiQ 400The DynamiQ 400 is a spring-weighted, height adjustable mount that allowsthe display to easily glide up and down with an effortless touch. This displaysuports a single display up to 198 lbs. The DynamiQ 400 also supports boththe 55″ and 70″ Cisco Webex Board.PART NUMBERSDISPLAYAVT-BB400-40Up to 83.6 lbsAVT-BB400-7083.6 - 145 lbsAVT-BB400-90145.2 - 198 lbsAVT-BB-CSB5555” Cisco Webex BoardAVT-BB-CSB7070” Cisco Webex BoardDIMENSIONS22″W x 23.6″ H x 2.9″DDynamiQ 400HThe DynamiQ 400H is the best height adjustable mount for large interactivewhiteboards. Move your whiteboard, as well as the projector, up and down inan effortless way.The DynamiQ 400H has a weight capacity up to 175 lbs and is suitable forextra large whiteboards up to 120 inch. The mount gives you great comfort:simply move the board by hand to the required position. The product is verysuitable for the educational market.PART NUMBERSWHITEBOARD WEIGHTAVT-BB400-40HUp to 42.9 lbsAVT-BB400-70H38.5 - 102.3 lbsAVT-BB400-90H93.5 - 157.3 lbsDIMENSIONS22″W x 41″ H x 2.9″DDynamiQ 650The DynamiQ 650 is the perfect height adjustable mount to move your largeinteractive touch screen displays up and down. This mechanical wall lift has aweight capacity up to 362 lbs in a compact design that will be hidden behindthe screen. Interface brackets for all screen sizes, a floor support and a mobileframe are available as accessories.6PART NUMBERSDISPLAY WEIGHTAVT-BB650-8075-154.3 lbsVT-BB650-130147.7-280 lbsAVT-BB650-180207.2-372.6 lbsDIMENSIONS36.4″W x 41.6″ H x 6.25″D
Mobile Cart AccessoriesCamera ShelfThe PS-50 video conferencing camera shelf is designed is be positioned verticallybetween dual displays on AVTEQ’s carts and wall mounts to achieve an eye-to-eyeperspective. Camera shelf may be positioned below displays on RPS and GMP seriescarts mounted with a 50″ or smaller displays or will work on wall mounted displays.PART NUMBERPS-50Standard Accessory ShelfThe optional 12.5″ deep accessory shelf is compatible with AVTEQ’s RPS-1000S/L, RPS800S/L, the GMP series, GM series and TMP series mobile carts and credenzas.PART NUMBERUS-1Accessory Shelf for RPS-200The optional 19″ accessory shelf is compatible with AVTEQ’s RPS-200 mobile cart.PART NUMBERRPS-AS2Accessory Shelf for RPS-200 & RPS-400The optional 14″ accessory shelf is compatible with AVTEQ’s RPS-200 and RPS-400mobile carts.PART NUMBERRPS-AS4Accessory Shelf for RPS-500The optional 19″ accessory shelf is compatible with AVTEQ’s RPS-500 mobile carts.PART NUMBERRPS-AS5AmpliVox Power Speaker ModuleThe PSM-200 ApliVox power speaker module can be installed on select AVTEQ mobilecarts and floor stands. The unit is pre-installed if included with the original order.PART NUMBERPSM-2007
6” Heavy Duty CastersSet of four 6″ heavy duty, single wheel casters, two locking. Casters are compatiblewith the following AVTEQ mobile carts: RPS-500, RPS-400, RPS-800, RPS-1000, RPX,plus the GM, GMP and TMP series.PART NUMBERHDC-6Furniture AccessoriesSliding, Rotating RackThe SR-12 additional sliding rotating rack is designed specifically for our 2-Bay and3-Bay technology credenzas.PART NUMBERPSM-200Credenza Fan KitRack-mounted fan kit for 2-Bay and 3-Bay Credenzas. Kit comes preinstalled whenordering the credenza and includes thermal cord with in-line thermostat. Auto-onfeature when ambient temp is 86 and off when 72 .PART NUMBERRACK FAN KITRack Mount BracketThe optional 2RU Rack Mount Bracket installs under a desk or table.PART NUMBERRMBRack Mounted Surge ProtectorRack mounted 9-port surge protector with 12-ft power cord.PART NUMBERRCK-PWR8
Call 800.285.8315 or visit AVTEQ.net 2019 AVTEQ Inc. All rights reserved. All specifications subject to change without notice. Trademarks used herein are the property of AVTEQ Inc. or of their respective owners.#MA092019
CRS-LS-TEAM Lifesize Team 220/200: CRS-LS-ROOM Lifesize Room 220/200: CR
