Transcription
NOTES:VERTICAL SECTIONSCALE: 3" 1'-0"SOUNDPROOF FIXED STUDIO WINDOWS ARE CUSTOMMANUFACTURED TO ACCOMMODATE ANY LANTED WINDOW ANGLE IS FULLY ADJUSTABLE. IT CANBE INSTALLED FROM -8 DEG. TO 8 DEG. (SLANTED UPOR DOWN). IT IS ATTACHED TO THE SIDES OF THE WALLOPENING TO THE DESIRED ANGLE DURING INSTALLATION.LEGEND:A. FRAME COMPONENT WITH MOUNTING FLANGE.B. FINLESS FRAME COMPONENT (TOP & BOTTOM ONLY).C. SOUND ISOLATED "FLOATING" SASH COMPONENTINTEGRATED INTO FRAME. NON-REMOVABLE ONEPIECE WINDOW ASSEMBLY.D. REMOVABLE SOUND ISOLATED SASH COMPONENTTYP.E. SOUNDPROOF CUSTOM 5/8" LAMINATED WINDOWGLAZING. (TYP. AT SOUND STUDIO SIDEINSTALLATION, OPTIONAL FOR CONTROL ROOMSIDE).F. 1/4" LAMINATED GLASS SHOWN. OFTEN 5/8" USED ONBOTH SIDES. WHEN 1/4" IS USED, IT IS TYPICALLY ONTHE CONTROL ROOM SIDE.SEE #03, #04 & #05 FOR MORE INFORMATIONASILLSILL10.5" WALL CONSTRUCTIONINSTALLATIONSLANTED STUDIO WINDOW8" 1.877.438.78431.877.226.4063 faxSTUDIO - 01
NOTES:HORIZONTAL SECTIONSCALE: 1:2SOUNDPROOF FIXED STUDIO WINDOWS ARECUSTOM MANUFACTURED TO ACCOMMODATE ANYWALL CONFIGURATION.ASLANTED WINDOW ANGLE IS FULLY ADJUSTABLE.IT CAN BE INSTALLED FROM -8 DEG. TO 8 DEG.(SLANTED UP OR DOWN). IT IS ATTACHED TO THESIDES OF THE WALL OPENING TO THE DESIREDANGLE DURING INSTALLATION.BCCEESIDEJAMBSIDEJAMBFFDA8" WALL CONSTRUCTIONINSTALLATIONDALEGEND:A. FRAME COMPONENT WITH MOUNTING FLANGE.B. STANDARD MOUNT FRAME COMPONENT EACHSIDE TYPICAL FOR "SLANTED WINDOW"INSTALLATION.C. SOUND ISOLATED "FLOATING" SASHCOMPONENT INTEGRATED INTO FRAME.NON-REMOVABLE ONE PIECE WINDOWASSEMBLY.D. REMOVABLE SOUND ISOLATED SASHCOMPONENT TYP.E. SOUNDPROOF CUSTOM 5/8" LAMINATEDWINDOW GLAZING. (TYP. AT SOUND STUDIOSIDE INSTALLATION, OPTIONAL FOR CONTROLROOM SIDE).F. 1/4" LAMINATED GLASS SHOWN. OFTEN 5/8" USED ONBOTH SIDES. WHEN 1/4" IS USED, IT IS TYPICALLY ONTHE CONTROL ROOM SIDE.SEE #03, #04 & #05 FOR MORE INFORMATION10.5" WALL CONSTRUCTIONINSTALLATIONSLANTED STUDIO 6.4063 faxSTUDIO - 02
SECTION DETAILSSCALE: FULL13 16"13 8"D13CSIDEJAMB16"SIDEJAMBE13 16"1313 8"16"HEADERBACBBSCALE: 1:1VERTICAL MOUNTED WINDOWINSTALLATION MOUNTING DETAILSADLEGEND:A.EB.SILLASIDE WALL DETAILC.D.E.SILL AND HEADER DETAILSCALE: 063 faxSTANDARD MOUNT FRAME COMPONENT WITH SASH BOOT, TYPICAL ATEACH SIDE.SOUND INSULATED SASH COMPONENT WITH GLAZING BOOT,TYPICAL.SOUNDPROOF WINDOWS CUSTOM 5/8" LAMINATED GLAZING.PROVIDE CONTINUOUS CAULK BEAD WHERE REQUIRED.1/8" THICK MOUNTING FOAM TAPE AS REQUIRED.SOUNDPROOF STUDIO WINDOWS ARE CUSTOM MANUFACTURED TOTHE EXISTING OR NEW CONDITIONS. MOUNTING SCREWS(SHOWN) ARE DEPENDENT UPON INSTALLATION CONDITIONS.STUDIO - 03
SECTION DETAILSSCALE: FULLHEADER13 16"13 8"16"EDFBSTUDIO13 13DB13 16"13E, F16"SIDE WALL DETAILSCALE: 1:1SLANT MOUNTED WINDOWINSTALLATION MOUNTING DETAILSCBLEGEND:A.B.C.D.E.F.E, FSILLSTANDARD MOUNT FRAME COMPONENT WITH SASH BOOT, TYPICAL AT EACH SIDE.FINLESS MOUNT FRAME COMPONENT WITH SASH BOOT, TYPICAL AT THE TOP AND BOTTOM.SOUND INSULATED SASH COMPONENT WITH GLAZING BOOT, TYPICAL.5/8" GLAZING TYPICAL.PROVIDE CONTINUOUS CAULK BEAD WHERE REQUIRED.1/8" THICK MOUNTING FOAM TAPE AS REQUIRED.SOUNDPROOF STUDIO WINDOWS ARE CUSTOM MANUFACTURED TO THE EXISTING OR NEWCONDITIONS. MOUNTING SCREWS (SHOWN) ARE DEPENDENT UPON INSTALLATION CONDITIONS.ASILL AND HEADER DETAILSCALE: 063 faxSLANTED WINDOW ANGLE IS FULLY ADJUSTABLE. IT CAN BE INSTALLED FROM -8 DEG. TO 8 DEG.(SLANTED UP OR DOWN). IT IS ATTACHED TO THE SIDES OF THE WALL OPENING TO THE DESIREDANGLE DURING INSTALLATION.STUDIO - 04
SECTION DETAILSSCALE: FULL13 16"EH13 16"AE111 16"1316"17 8"GCACBFBCSIDE WALL DETAILSCALE: 1:1REMOVABLE VERTICAL MOUNTED WINDOWINSTALLATION MOUNTING DETAILSALEGEND:DA.HGB.C.ASILL AND HEADER DETAILSCALE: 1:1D.E.F.G.H.SHOWN VERTICAL. REMOVABLE PANEL WINDOW CAN BE MOUNTEDVERTICALLY OR SLANTED (USING SLANTED FRAME DESIGN). BOTHWINDOWS IN WALL OPENING CAN BE VERTICAL OR SLANTED.FIXED FRAME COMPONENT.SOUND INSULATED REMOVABLE SASH COMPONENT WITH GLAZINGBOOT, TYP.SOLID INSERT WITH UHMWP TRACK.LEAF SPRING INSERT WITH UHMWP TRACK.1/4" GLAZING, 5/8" GLAZING OPTION AS NECESSARY, TYP.PROVIDE CONTINUOUS CAULK BEAD WHERE REQUIRED.1/8" THICK MOUNTING FOAM TAPE AS .226.4063 faxSOUNDPROOF STUDIO WINDOWS ARE CUSTOM MANUFACTURED TO THEEXISTING OR NEW CONDITIONS. MOUNTING SCREWS (SHOWN) AREDEPENDENT UPON INSTALLATION CONDITIONS.STUDIO - 05
b.finless frame component (top & bottom only). c.sound isolated "floating" sash component integrated into frame. non-removable one piece window assembly. d.removable sound isolated sash component typ. e.soundproof custom 5/8" laminated window glazing. (typ. at sound studio side installation
