Transcription
ANSI/AWWA C600-17(Revision of ANSI/AWWA C600-10) AWWA StandardInstallation of DuctileIron Mains and TheirAppurtenancesEffective date: July 1, 2017.First edition approved by AWWA Board of Directors May 8, 1977.This edition approved Jan. 14, 2017.Approved by American National Standards Institute Feb. 14, 2017.SMCopyright 2017 American Water Works Association. All Rights Reserved.
Committee PersonnelThe AWWA A21 Subcommittee on the Installation of Ductile-Iron Pipe, which reviewed andapproved this standard, had the following personnel at the time of approval:J. Hal Eddings, ChairGeneral Interest MembersS.M. Passarelli,* Standards Engineer Liaison, AWWA, Denver, Colo.J.R. Plattsmier, HDR Engineering Inc., Denver, Colo.P.A. Selig, Consultant, Birmingham, Ala.J.M. Vellano, Vellano Brothers Inc., Latham, N.Y.(AWWA)(AWWA)(AWWA)(AWWA)Producer MembersL.R. Dunn, U.S. Pipe & Foundry Company, Birmingham, Ala.J.H. Eddings, McWane Ductile, Phillipsburg, N.J.J.A. Fancher II,† American Cast Iron Pipe Company, Birmingham, Ala.M.D. Gaston, American Cast Iron Pipe Company, Birmingham, Ala.L.G. Horn, Ductile Iron Pipe Research Association, Birmingham, Ala.H. Kennedy Jr., Harold Kennedy & Associates, Fuquay Varina, N.C.(AWWA)(AWWA)(AWWA)(AWWA)(DIPRA)(AWWA)User MembersD.T. Bradley, Oak Lodge Water District, Portland, Ore.J.L. Doane, Tualatin Valley Water District, Beaverton, Ore.R.Y. Matsui, Honolulu, HawaiiD.D. Montgomery, Independence Water Department, Independence, Mo.C.J. Patla, Connecticut Water Service Inc., Clinton, Conn.T.J. Roode, Denver Water, Denver, Colo.R.L. Worden, COMCD, Norman, Okla.* Liaison, nonvoting† AlternateiiiCopyright 2017 American Water Works Association. All Rights )
The AWWA Standards Committee on Ductile-Iron Pipe and Fittings, which reviewed andapproved this standard, had the following personnel at the time of approval:John R. Plattsmier, ChairGeneral Interest MembersJ. Hebenstreit, Underwriters Laboratories Inc., Northbrook, Ill.M.B. Horsley, Horsley Engineering LLC, Overland Park, Kan.D.H. Kroon, Corrpro Companies Inc., Houston, TexasD.D. Lary,* Wright-Pierce, Topsham, MaineP.J. Mourt, Mott MacDonald, Philadelphia, Pa.S.M. Passarelli,† Standards Engineer Liaison, AWWA, Denver, Colo.J.R. Plattsmier, HDR Engineering Inc., Denver, Colo.S. Pool,* HDR Engineering Inc., Denver, Colo.T.M. Stinson, Kleinfelder, Cambridge, Mass.L.C. Yates, McGoodwin, Williams & Yates, Fayetteville, WA)(NEWWA)(AWWA)Producer MembersL.R. Dunn, U.S. Pipe & Foundry Company, Birmingham, Ala.J.H. Eddings, McWane Ductile, Phillipsburg, N.J.J.A. Fancher II,* American Cast Iron Pipe Company, Birmingham, Ala.M.D. Gaston, American Cast Iron Pipe Company, Birmingham, Ala.L.G. Horn, Ductile Iron Pipe Research Association, Birmingham, Ala.M. Horton,* U.S. Pipe & Foundry Company, Birmingham, Ala.J.C. Jones, S&B Technical Products, Fort Worth, TexasH. Kennedy Jr., Harold Kennedy & Associates, Fuquay Varina, N.C.T.J. Muntz, National Association of Pipe Fabricators, Stillwater, Minn.M.D. Wooten, Griffin Pipe Products Company, Downers Grove, WA)(AWWA)(AWWA)User MembersD.T. Bradley, Oak Lodge Water District, Portland, Ore.M.J. Britch, Tualatin Valley Water District, Portland, Ore.A.J. DeBoy,* Indiana American Water, Greenwood, Ind.* Alternate† Liaison, nonvotingivCopyright 2017 American Water Works Association. All Rights Reserved.(AWWA)(AWWA)(AWWA)
W.C. Duke, Bureau of Reclamation, Denver, Colo.M.W. Griffin, American Water Company, Saint Louis, Mo.J.M. Kennedy, Tampa Bay Water, Clearwater, Fla.D.D. Montgomery, Independence Water Department, Independence, Mo.K.C Morgan,* Standards Council Liaison, City of Phoenix Water Services,Phoenix, Ariz.G.M. Page, Cobb County–Marietta Water Authority, Marietta, Ga.C.J. Patla, Connecticut Water Service Inc., Clinton, Conn.T.J. Roode, Denver Water, Denver, Colo.A. Shively, City of Kansas City, Kansas City, Mo.R.L. Worden, COMCD, Norman, Okla.* Liaison, nonvotingvCopyright 2017 American Water Works Association. All Rights )(AWWA)(AWWA)(AWWA)
ContentsAll AWWA standards follow the general format indicated subsequently. Some variations from thisformat may be found in a particular standard.SEC.PAGESEC.PAGEForewordIIntroduction. ix4.5Highway and RailroadCrossings. 21I.ABackground. ix4.6Trenchless Applications. 21I.BHistory. ix4.7Subaqueous Crossings. 22I.CAcceptance. x4.8Service Taps. 23IISpecial Issues. xi5VerificationII.A Use as Reference. xiII.B Chlorine and ChloramineDegradation of Elastomers. xii5.1Inspection. 255.2Hydrostatic Testing. 25III6Delivery6.1Handling, Unloading, andStorage. 306.2Affidavit of Compliance. 32Use of This Standard. xiiIII.A Purchaser Options andAlternatives. xiiIII.B Modification to Standard. xiiIVMajor Revisions. xiiVComments. xiiiFigures1Laying Conditions forDuctile-Iron Pipe. 10Standard1General1.1Scope. 11.2Purpose. 21.3Application. 22References. 23Definitions. 34Requirements4.1Permeation. 44.2Materials. 44.3Installing Ductile-Iron Mains. 44.4Disinfection. 212Push-on–Joint Assembly. 113Mechanical-Joint Assembly. 124Pipeline Curve Geometry. 155Preferred Method for MakingDirect Service Taps onPolyethylene-EncasedIron Pipe. 24Tables1Mechanical-Joint Bolt Torque. 132Maximum Joint Deflection FullLength Pipe—Push-on–TypeJoint Pipe. 14viiCopyright 2017 American Water Works Association. All Rights Reserved.
SEC.PAGESEC.PAGE3Maximum Joint DeflectionFull-Length Pipe—Mechanical-Joint Pipe. 155BHydrostatic Testing Allowanceper 300 m of Pipeline—L/hr. 284Maximum RecommendedDirect Tap Size. 246Maximum Stacking Heights—Ductile-Iron Pipe. 315AHydrostatic Testing Allowanceper 1,000 ft of Pipeline—gph. 27viiiCopyright 2017 American Water Works Association. All Rights Reserved.
The AWWA A21 Subcommittee on the Installation of Ductile-Iron Pipe, which reviewed and approved this standard, had the following personnel at the time of approval: J. Hal Eddings, ChairFile Size: 1020KBPage Count: 6
