Transcription
Dal-Seal Sheet Membranes& Shower Products CatalogSheet MembranesShower Pan LinersShower Niches & BenchesShower DrainsAdhesives & Sealants
CONTENTSSheet MembranesChloraloy .5Dal-Pan.5Dal-Seal TS.6Dal-Seal CIS.6Dal-Sound.7ValueSeal .7Dal-Deck.8Noble Curbs 8Noble Niches.9Noble Benches & Shelf Bench.9Noble DrainsFreeStyle Linear Drains .10Clamping Ring Drains.11Thin-Bed Shower Drains.112Pre-Slopes & Shower BasesPRO-SLOPE .12ProBase .12Adhesives & SealantsNobleBond EXT.13Dal-Bond 21.13Dal-Sealant 150 .13NobleWeld 100.13Dal-Pan Seam Cement.13Installation ProductsPositive Weep Protector .14NobleFlex Drain Flashing.14Inside Corners.15Outside/Dam Corners.15
Dal-Seal. the most successful sheet membranes in Dal-Tile history.For over 20 years, Dal-Seal membranes have successfully served the waterproofing, crack isolation,and sound reduction needs of the tile industry. At the heart of all Dal-Seal sheet membranes is acore layer of Chlorinated Polyethylene (CPE), an inherently flexible elastomeric sheet that will notrot, crack, or deteriorate due to microorganisms. Sheet membranes are available for waterproofing,crack isolation, joint bridging, and sound reduction.Dal-Seal sheets save time and money. Millions of square feet of Dal-Seal sheet membranes havebeen specified and installed in the world’s most prestigious projects (like City Center in Las Vegasand The Burj Dubai/Khalifa). For over 2 decades, Dal-Seal has earned a reputation for dependableperformance.CONTRACTOR TRAINING PROGRAMSDAL-TILE STOCKING PROGRAMDal-Tile offers contractor training programs focusing on installationmethods used with Dal-Seal products in commercial and residentialapplications.Look for the stocking item icon which designates that this product isavailable through Dal-Tile RDC’s.J Stocking ItemThe programs are specifically designed to help tile contractors: Avoid costly callbacksImprove installation efficiency; optimize time, energy,and moneyMaximize shower salesThese hands-on trainings are being held in various locationsthroughout the United States and Canada. For more information andto see when a training will be held in your area, please consult yourDal-Tile Representative or branch Manager.INSTRUCTIONAL VIDEOSFree online and DVD instructional videos are available thatdemonstrate installation techniques of full mortar bed and thin-setmethods for showers, as well as an overview of the FreeStyle LinearDrain systems.DVD’s with these helpful videos can be found at your Dal-Tile branch.Visit www.noblecompany.com/dal-tile for more in-depth instructions, diagrams, and how-to videos on all featured products.3
Dal Sheet Membrane Usage GuideMembraneWaterproofingCrack IsolationJoint BridgingChloraloy Dal-Seal TS Dal-Seal CIS Dal-Sound Dal-Deck ValueSeal Dal-Pan Sound Reduction Exterior Applications Features & Benefits of Dal-Seal Sheet MembranesVersatilityUse over common substrates, including: Primed gypsum underlayments Radiant heating systems Most impervious substrates Many wood subfloors Use for new construction or renovation in residential orcommercial applicationsDurability of Membranes Made from CPE Made from CPE, won’t rot or crack Guaranteed for the life of the original tile installation Excellent resistance to chemicals Unaffected by a wide range of temperatures & conditionsInstallation Uniform thickness ensures quality installations by reducingworkmanship variables Simple installation processesCrack Isolation Isolates tile from the substrate to prevent telegraphingsubstrate defects Highest level of protection and performance:- Rated “High Performance” in System Crack Resistanceportion of ANSI A118.12- Rated “Extra Heavy” by Robinson Floor TestWaterproofing Impervious: protects against water and vapor transmission Suitable for shower and steam room waterproofingQUICK & EASY INSTALLATIONUnlike fluid-applied products, our sheet membranes do not requirecuring, so work can progress as soon as sheets are installed.Sheets also minimize variables in workmanship. Large sections canbe created by seaming sheets together.1. Applybondingagent42. Embedsheet3. InstalltileVisit www.noblecompany.com/dal-tile for more in-depth instructions, diagrams, and how-to videos on all featured products.
Made from PVC1TCNAExposure COMClassification: 2-4RES2-4ggggALL WET AREASHotelsCondominiumsSingle/Multi-Unit HomesMade from CPE1TCNAExposure COMClassification: 2-6RES2-6DAL-PANChloraloy PVC SHOWER PANCPE SHOWER PANFEATURES & BENEFITSThe waterproofing membrane for loose-laid shower pans. Dal-Panis designed for use under full mortar bed installations of ceramic orstone tile and terrazzo. Great for use as a shower pan liner. Barrier to water and vapor Sheet membrane: Ensures uniform quality, thickness, andminimizes variables in workmanship Made from flexible Polyvinyl Chloride (PVC) 5-YEAR PRODUCT WARRANTYDIMENSIONSNominal Thickness: 0.040” (1.0mm)Roll Sizes:J Part #420022: 5’ x 50’ 250 sq. ft. (1.5m x 15.2m 22.8m2)J Part #420023: 6’ x 50’ 300 sq. ft. (1.8m x 15.2m 27.4m2)Nominal Thickness: 0.030” (0.8mm)Roll Sizes:J Part #420025: 5’ x 50’ 250 sq. ft. (1.5m x 15.2m 22.8m2)J Part #420026: 6’ x 50’ 300 sq. ft. (1.8m x 15.2m 27.4m2)LISTINGS & APPROVALSALL WET AREASFood CourtsHotelsCondominiumsSingle/Multi-Unit HomesHealth ClubsHealthcare FacilitiesMalls and PlazasDormitory/MilitaryFEATURES & BENEFITSThe original CPE waterproofing sheet membrane that setsthe standard for loose-laid shower pans. A record of provenperformance with over 50 years of successful installations.Chloraloy is designed for use under full mortar bed installations ofceramic or stone tile and terrazzo. Excellent for use as a showerpan liner or to waterproof roman tubs, steam rooms, bathrooms,and hydrotherapy rooms. Unsurpassed barrier to water and vapor Proven performance – more than 50 years Easy to fabricate and form – holds a crease so corners and foldsare tight Sheet membrane: Ensures uniform quality, thickness, andminimizes variables in workmanship Made from high-grade Chlorinated Polyethylene (CPE) LIFETIME WARRANTYDIMENSIONSNominal Thickness: 0.040” (1.0mm)Roll Sizes:J Part #420505: 4’ x 50’ 200 sq. ft. (1.2m x 15.2m 18.6m2)J Part #420506: 5’ x 40’ 200 sq. ft. (1.5m x 12.2m 18.6m2)J Part #420512: 6’ x 33.3’ 200 sq. ft. (1.8m x 10.1m 18.6m2)LISTINGS & APPROVALS ASTM D4551FILE #3577ggggggggg ASTM D4068 ASTM E96 Procedure A 0.07 PermsFILE #30461Exposure Classifications (See TCNA Handbook): The end user significantly affects the amount of water and vapor an installation will be exposed to. Examples provided [below] and the classificationsassigned to the individual methods are guidelines only and are not meant to be all inclusive. Base installation method selection on actual exposure levels, and consult with product manufacturers andtheir specifications. In methods where inclusion of a waterproof membrane is optional, the design professional must clearly specify that a membrane is desired. Optional membranes are not includedunless clearly specified. - Excerpt from TCNA HandbookVisit www.noblecompany.com/dal-tile for more in-depth instructions, diagrams, and how-to videos on all featured products.5
Made from CPE1TCNAExposure COMClassification: 1-5RES1-5gggggggggALL WET AREASFood CourtsHotelsCondominiumsSingle/Multi-Unit HomesHealth ClubsHealthcare FacilitiesMalls and PlazasDormitory/MilitaryMade from CPE1TCNAExposure COMClassification: 1-5RES1-5Dal-Seal TSDal-Seal CISWATERPROOFINGCRACK ISOLATIONFEATURES & BENEFITSThe membrane that sets the industry standard for bonded thin-bedwaterproofing and crack isolation. Use in wet areas includingshowers and continuous use steam showers and other interiorapplications. Dal-Seal TS has superior permeation characteristics.With more than 30 years of proven industry performance, Dal-SealTS is installed in some of the world’s most prestigious projects. Unsurpassed quality and performance Suitable for steam showers – Impervious to water and vapor(0.15 perms) Highest performing crack isolation membrane available:Bridges more than 1/8” movement Sheet membrane: Ensures uniform quality, thickness, andminimizes variables in workmanship Lightweight and easy to fold and crease Durable and resistant to chemical compounds Made from Chlorinated Polyethylene (CPE) For best results, install with NobleBond EXT as bonding agent LIFETIME WARRANTYDIMENSIONSLISTINGS & APPROVALSFILE #43396High-Rise BuildingsDepartment StoresAirportsRadiant HeatingHotelsCondominiumsSingle/Multi-Unit HomesMalls and PlazasDormitory/MilitaryFEATURES & BENEFITSBridges more than 1/8” movement. For use over commonsubstrates including concrete, cured mortar beds, primed gypsumunderlayments, many wood subfloors, and radiant heat. Asuperior membrane with the highest ANSI Standard performancerating for crack isolation. With more than 25 years of provenindustry performance, Dal-Seal CIS is installed in some of theworld’s most prestigious projects. Superior performance for residential and commercialcrack protection Impervious to water and vapor (0.15 perms) Sheet membrane: Ensures uniform quality, thickness, andminimizes variables in overall workmanship Lightweight and easy to fold and crease Made from Chlorinated Polyethylene (CPE) Great solution for OSB and lightweight gypsum underlayments Fully compatible with a variety of multi-purposethin-set bonding agents that meet ANSI A118.4 For best results, bond with Dal-Bond or NobleBond adhesives LIFETIME PRODUCT WARRANTY 10-YEAR CRACK-FREE PERFORMANCE WARRANTYDIMENSIONSNominal Thickness: 0.030” (0.8mm)Roll Sizes:J Part #420100: 5’ x 100’ 500 sq. ft. (1.5m x 30.5m 46.5m2)PMG-1059ggggggggg Meets ANSI A118.10 WaterproofingASTM E96 Procedure E 0.15 PermsASTM C627 “Extra Heavy”ANSI A118.12 (Jig Test)“High Performance”Nominal Thickness: 0.030” (0.8mm)Roll Sizes:J Part #420182: 2’ x 50’ 100 sq. ft. (0.6m x 15.2m 9.3m2)Part #638122: 3’ x 50’ 150 sq. ft. (0.9m x 15.2m 13.9m2)Part #638121: 4’ x 50’ 200 sq. ft. (1.2m x 15.2m 18.6m2)Part #420011: 6’ x 50’ 300 sq. ft. (1.8m x 15.2m 27.9m2)LISTINGS & APPROVALSPMG-1059 ASTM C627 “Extra Heavy” ANSI A118.12 (Jig Test)“High Performance” Meets ANSI A118.10 WaterproofingFILE #4339Visit www.noblecompany.com/dal-tile for more in-depth instructions, diagrams, and how-to videos on all featured products.
Made from CPE1TCNAExposure COMClassification: 1-3RES1-3ggggggggHigh-Rise BuildingsLibrariesApartment BuildingsHotelsCondominiumsSingle/Multi-Unit HomesHealthcare FacilitiesDormitory/MilitaryMade from POLYETHYLENE1TCNAExposure COMClassification: 2-4RES2-4Dal-SoundValueSeal SOUND REDUCTIONWATERPROOFINGFEATURES & BENEFITSThe superior sound reduction membrane for use under hardsurface floors including ceramic and stone tile and hardwoodflooring. Use over common substrates such as concrete, curedmortar beds, tile backer boards, many plywood subfloors, radiantheat, and primed gypsum underlayments. Dal-Sound is theonly membrane that offers sound reduction, crack isolation, andwaterproofing all in one thin sheet. Effective impact sound reductionAlso provides waterproofing and crack isolationMore than 20 years of proven industry performanceExcellent for renovationsThe thin profile of Dal-Sound minimizes elevation, door-jamb,and cabinet height issuesSheet membrane: Ensures uniform quality, thickness, andminimizes variables in overall workmanshipMade from Chlorinated Polyethylene (CPE)For best results, bond with Dal-Bond or NobleBond adhesivesLIFETIME WARRANTYDIMENSIONSLISTINGS & APPROVALSFILE #4339ALL WET AREASFood CourtsHotelsCondominiumsSingle/Multi-Unit HomesHealth ClubsHealthcare FacilitiesApartment BuildingsDormitory/MilitaryFEATURES & BENEFITSValueSeal is an ultra-thin, cost-effective sheet membrane forinterior waterproofing of floors and walls. Designed for bondedwaterproofing applications in both residential and commercialconstruction. ValueSeal has superior characteristics and moreseaming options than other thin waterproofing sheet membraneson the market. Thin, lightweight, flexibleHolds a creaseCrack isolationFor commercial and residential useAvailable in 3’ and 6’ widthsCan be bonded with latex modified thin-set or NobleBond EXTTranslucent, easily see coverage of bonding agentMade from Polyethylene10-YEAR PRODUCT WARRANTYDIMENSIONSNominal Thickness: 0.050” (1.25mm)Roll Sizes:J Part #614298: 6’ x 33.3’ 200 sq. ft. (1.8m x 10.2m 18.6m2)PMG-1059ggggggggg ASTM E492; ASTM E90:ICC 62; STC 59 ASTM E2179: Δ 12 Meets ANSI A118.13 Sound Reduction Meets ANSI A118.10 Waterproofing ASTM C627 Crack Isolation “Extra Heavy” ANSI A118.12 (Jig Test)“High Performance”Nominal Thickness: 0.016” (0.4mm)Roll Sizes:J Part #566323: 3’ x 33.3’ 100 sq. ft. (0.9m x 10.15m 9.3m2)J Part #566324: 3’ x 100’ 300 sq. ft (0.9m x 30.48m 27.9m2)J Part #566325: 6’ x 66.67’ 400 sq ft. (1.8m x 20.32m 36.6m2)J Part #566326: 5” x 30’ Cap StripLISTINGS & APPROVALSPMG-1059 Meets ANSI A118.10 Waterproofing ASTM E96 Procedure E Less than0.5 Perms ASTM C627 Crack Isolation “Heavy” Meets ANSI A118.12 (Jig Test) wheninstalled with NobleBond EXTFILE #4339Visit www.noblecompany.com/dal-tile for more in-depth instructions, diagrams, and how-to videos on all featured products.7
Made from CPE1TCNAExposure COMClassification: 2-6RES2-6gggggDecksPlazasBalconiesWalkwaysPool DecksDal-DeckNoble CurbsEXTERIOR WATERPROOFINGCURB OVERLAYS & SOLID CURBSFEATURES & BENEFITSThe most effective sheet membrane for thin-bed waterproofing andcrack isolation of exterior tile installations. For new constructionand renovation of concrete decks, plazas, balconies, walkways,etc. High performing crack isolation membrane: Bridges more than1/8” movement No need for additional waterproofing Sheet membrane: Ensures uniform quality, thickness, andminimizes variables in overall workmanship More than 15 years of proven performance Suitable over some plywood decks that are covered with backerboard or a reinforced mortar bed No curing – Install tile immediately For best results, bond with NobleBond EXT Made from Chlorinated Polyethylene (CPE) 10-YEAR PRODUCT WARRANTYFEATURES & BENEFITSCreates a tileable surface over the dam. Made from ExpandedPolystyrene (EPS) and coated with acrylic polymer finish for thinset installation of ceramic or stone tile. Easy to install, eliminatesunnecessary penetrations of the shower pan liner inside or on topof the dam. Lightweight, durable, and easily cut to size. Customsizes are also available with minimum quantity orders.SIZESSolid Curb Sizes:*Part #495800: 3’ longPart #493008: 4’ longPart #495801: 5’ longCurb Overlay Sizes:*Part #548893: 3’ longPart #548894: 4’ longPart #548895: 5’ long*8’ length available by special order.DIMENSIONSNominal Thickness: 0.040” (1.0mm)Roll Sizes:J Part #566021: 6’ x 50’ 300 sq. ft. (1.8m x 15.2m 27.9m2)LISTINGS & APPROVALSPMG-1059FILE #43398 Meets ANSI A118.10 Thin-BedWaterproofing ASTM C627 Crack Isolation“Extra Heavy” ANSI A118.12 (Jig Test)“High Performance”
Noble NichesNoble BenchesSHOWER RECESSESSHOWER BENCHESFEATURES & BENEFITSFEATURES & BENEFITSPreformed, waterproof, and ready to tile, these shower nichesfrom Noble Company put the finishing touch to any custom project.Made from durable, lightweight materials, and install in minuteswithout penetration of the Niche. No outside edges to feather.Available in custom shapes and sizes with minimum quantityorders.SIZES*J Rectangular14-1/4” W x 22-1/2” HPart #544176Preformed, waterproof, and ready to tile, Noble Benches area convenient addition to any custom shower. Can be cut andcombined to create custom seating in any shower or wet area. Madefrom durable, lightweight materials, they are easy to install. Availablein custom shapes and sizes with minimum quantity orders.*Shelf Bench seat is made from Extruded Polystyrene (XPS),coated with acrylic polymer finish for thin-set installation of ceramicor stone tile and supported with a high-quality aluminum frame.SIZESJPeakedWide Combo14-1/4” W x 22-1/2” H 14-1/4” W x 22-1/2” HPart #493014Part #493005Wide Combo Arch14-1/4” W x 22-1/2” HPart #497357SMALL TRIANGULAR22” W x 20” H x 15 ½” DLARGE TRIANGULAR32 ½” W x 20” H x 23” DCURVED15 ½” R x 20” HSQUARE11 ½” W x 20” H x 11 ½” DLARGE RECTANGULAR36” W x 20” H x 15 ½” DSMALL RECTANGULAR36” W x 20” H x 11 ½” DPart #547231Spice Rack14-1/2” W x 16-1/4” HPart #548897Part #547233J Square14-1/2” W x 14-1/2” HPart #493003J Narrow Combo8-1/4” W x 22-1/2” HPart #493006Narrow Combo Arch8-1/4” W x 22-1/2” HPart #497358Part #547232Part #54723031.5” Tall14-1/4” W x 31-1/2”Part #545445Part #54889948” TallPart #54889814-1/4” W x 48” HPart #545446SHELF BENCH22 7/8” D x 32 5/16” W x 4” HPart #547737*No custom sizes available for Shelf BenchSoapFour-Shelf Corner Two-Shelf Corner12-3/4” W x 96” HPart #54849712-3/4” W x 96” HPart #5484988-1/4” W x 8-1/4” HPart #493007*Sizes represent Rough-In DimensionsDouble SquareU.S. Patent No. 8,225,435Canadian Patent No. 264945014-1/4” W x 27-3/4” HPart #5666419
VIEW MORE PRODUCTDETAILS, VIDEOS,AND DIAGRAMS ONLINENOBLE DRAINSFreeStyle Linear Drains U.S. Patent No. 8,474,068Canadian Patent No. 2,690,794Patent Pending: EP Publication No. 2354339FEATURES & BENEFITSSTRAINERSContemporary styling with a selection of seven drain lengthsand brushed stainless steel or tile top strainers. FreeStyle LinearDrains allow the use of larger tiles for greater design flexibility.A clamping collar assures a watertight connection between thedrain and the waterproofing sheet membrane. Low profile andhigh-capacity drainage (36 GPM) make the FreeStyle Linear Drainideal for use in barrier-free/ADA showers. Customize and combinethese for a unique design with standard or large format tiles. Theremovable internal pre-strainer makes maintenance a breeze.FULL MORTAR BED ADAPTER KIT AND CONNECTOR KITALSO AVAILABLE.SIZES*24” Drain: 24”L x 4-1/2”W x 1-1/4”D32” Drain: 32”L x 4-1/2”W x 1-3/8”D36” Drain: 36”L x 4-1/2”W x 1-3/8”D40” Drain: 40”L x 4-1/2”W x 1-7/16”D48” Drain: 48”L x 4-1/2”W x 1-1/2”D54” Drain: 54”L x 4-1/2”W x 1-9/16”D60” Drain: 60”L x 4-1/2”W x 1-5/8”D*All sizes available in PVC or ABSStyle: Slotted1Style: WaveFinish: Stainless SteelFinish: Stainless SteelStyle: Cross-Hatch Finish: Stainless SteelStyle: Tile Top1 Finish: Insert your tilePMG-1065FILE #7249Approved bythe State ofMassachusetts10Style: Pyramid1 Finish: Stainless Steel1Complies with ADA guidelines for handicap accessible showers.
Clamping Ring DrainsThin-Bed DrainsHIGH QUALITY SHOWER DRAINSTOP MOUNTED CLAMPING COLLARFEATURES & BENEFITSFEATURES & BENEFITSThree-part shower drains that provide a mechanical attachment ofthe waterproofing sheet membrane to ensure waterproof integrity,and quality construction helps ensure durable performance.The weep slots and holes on both sides of the collar maximizedrainage. With over 2” of height adjustment available, this drainis built with brass inserts in the collar and the tail-piece preventsdamage from over-tightening.SIZESSIZESSee the Clamping Ring Drain Product Description CAD drawing fordimensions.STRAINERSPolished Stainless#545487 PVCOil Rubbed Bronze#544529 PVCMatte Silver#564560 PVCStainless steel floor flange and clamping collar with PVC body thatcan be tied directly into a sheet membrane waterproofing system.This Thin-Bed Drain is designed for surface applied, bondedwaterproofing membranes. With the clamping collar flush withthe strainer, water is able to flow directly into the drain. No weepholes are required. The Thin-Bed Drain adjusts from flush to ¾”to accommodate various tile depths. Low profile makes it ideal forbarrier free showers.See the Thin-Bed Drain Product Description CAD drawing fordimensions.STRAINERSPolished Stainless#545488 PVCOil Rubbed Bronze#544530 PVC#566652 ABSMatte Silver#564561 PVC#566653 ABSBrushed Golden Nickel#542167 PVC#545121 ABSChrome #545449Chrome #545452Stainless Steel #545448Stainless Steel #545451Brushed Golden Nickel #545447Brushed Golden Nickel #545450Chrome Plated#560672 PVC#565615 ABSChrome Plated#542166 PVC#546275 ABSFILE #4065FILE #406511
PRE-SLOPES &SHOWER BASESVIEW MORE PRODUCTDETAILS, VIDEOS,AND DIAGRAMS ONLINEPRO-SLOPE ProBase CODE REQUIRED PRESLOPEPREFORMED SHOWER BASEFEATURES & BENEFITSPatented preformed composite made from Expanded Polystyrene(EPS) with a reinforced cutting template that creates a coderequired slope under the waterproofing sheet membrane in a fullmortar bed application. Durable and strong, rated at 500 lbs./sq ft.,PRO-SLOPE is lightweight and easy to cut. An ideal accessory forany shower installation.SIZESPart #505203: 40” x 40” PRO-SLOPE KitPart #543350: 60” x 60” PRO-SLOPE KitPart #560674: 40” x 80” Tub Replacement KitPart #547253: 20” x 40” Tapered ExtensionPart #484653: 20” x 40” Flat ExtensionPart #547251: 30” x 60” Tapered ExtensionPart #547252: 30” x 60” Flat Extension12U.S. Patent No. 8,230,535Canadian Patent No. 2,689,796Patent Pending: EP Publication No. 10150233.4FILE #4339 PMG-1059FEATURES & BENEFITSOne-piece, waterproof, sloped shower base that is ready to tile.Made from high-strength polypropylene honeycomb with a DalSeal Sheet Membrane laminated to the top side. Cut to size with astandard utility knife. Installs in minutes.SIZESPart #560213: 48” x 48” ProBase with center drainPart #560212: 32” x 60” ProBase with center drainPart #560792: 32” x 60” ProBase with end drainCustom sizes available with minimum quantity order.
ADHESIVES & SEALANTSVIEW MORE PRODUCTDETAILS, VIDEOS,AND DIAGRAMS ONLINENobleBond EXTDal-Bond 21SHEET MEMBRANE BONDINGSHEET MEMBRANE BONDINGFEATURES & BENEFITSWet-set adhesive for bonding Dal-Seal and Dal-Deck sheetmembranes in interior and exterior applications, including showers.NobleBond EXT is a high-strength, water resistant adhesivewith a fast cure time making it ideal for horizontal and verticalsurfaces. Contains antimicrobial protection, which inhibits thegrowth of mildew and bacteria. Can be used over cured concrete,cementitious backer boards, plywood that has not been chemicallytreated, terrazzo substrates, and more. NobleBond EXT can alsobe used with radiant heating systems.SIZESPart #560671: 1 gallon pailPart #544177: 4 gallon pailCoverage: approximately 80-100 sq. ft. / gallonDal-Sealant 150SHEET MEMBRANE SEAMING & SEALINGFEATURES & BENEFITSPolymeric waterproof sealant for seaming sheet membranestogether. Can be used as a concealed terminal edge sealant.Also used to spot bond sheets to vertical or horizontal surfaces orpreformed corners to membranes, studs, etc.SIZESJ Part #614299: 10.3 oz tubeCoverage: approximately 40 linear feet / tube (3/16” bead)FEATURES & BENEFITSPressure sensitive, ready-to-use, latex-based adhesive forhorizontal, interior dry applications. Use to bond Dal-Sealsheet membranes for crack isolation/joint bridging and soundreduction on floors. Not suitable for vertical, exterior, or wet areaapplications. Dal-Bond 21 can be used over cured concrete, primedgypsum underlayments, plywood that has not been chemicallytreated, terrazzo substrates, and more. Dal-Bond 21 can also beused with radiant heating systems. Low odor - zero VOCs.SIZESJ Part #420495: 1 gallon pailPart #614300: 4 gallon pailCoverage: approximately 150 sq. ft. / gallonNobleWeld 100SOLVENT SEAMING FOR CPE SHEET MEMBRANESSIZESPart #420482: 1 pint containerPart #420483: 1 quart containerCoverage: approximately 50 linear feet / pintDal-Pan Seam CementSOLVENT SEAMING FOR PVC SHEET MEMBRANESSIZESPart #420024: 1 pint containerCoverage: approximately 50 linear feet / pint13
INSTALLATION PRODUCTSVIEW MORE PRODUCTDETAILS, VIDEOS,AND DIAGRAMS ONLINEPositive Weep Protector NobleFlex DRAINAGE SOLUTIONDRAIN FLASHINGU.S. Patent No. 7,632,401FEATURES & BENEFITSKeeps weep holes in clamping ring open to facilitate drainage andhelps prevent mortar bed saturation. The Positive Weep Protectorfrom Noble Company is an easy to install, permanent solutionto any full mortar bed installation and is included in every PROSLOPE kit. Also sold individually.SIZEPart #484647: One size fits allFILE #4339FEATURES & BENEFITSProvides smooth transition of thin-set waterproofing sheetmembrane to a clamping ring drain. Enables the use of Noblebonded membranes (ANSI A118.10) with traditional clamping ringdrains. Facilitates membrane to drain transition when the drain isset too low. Provides an alternative to “integrated bonding flange”drains.SIZESPart #543656: 3/4” DeepPart #566654: 1-1/8” DeepPart #543657: 1-1/2” DeepPart #567043: 1-3/4” DeepPart #567044: 2” DeepCustom sizes available with minimum quantity order.14PMG-1059
Inside CornersOutside/Dam CornersPREFORMED SHOWER CORNERSPREFORMED SHOWER CORNERSFEATURES & BENEFITSSeals lap corners to protect against leaks. Made from ChlorinatedPolyethylene (CPE), they will not rot, crack, or deteriorate due tomicroorganisms.SIZESPart #5457153-1/4” high x 3-1/4” deep x 4-3/4” wideCustom sizes available with minimum quantity order.FEATURES & BENEFITSProtects against leaks at outside corners and dams. Provides aquicker, watertight installation. Available in CPE and PVC.SIZESPart #420502: CPE Outside CornerPart #405999: PVC Outside Corner3-1/8” high x 5-3/4” diameterCustom sizes available with minimum quantity order.15
Dal-Tile Corporation 800.933.TILE 214.398.1411 2016 Dal-Tile Corporation. All rights reserved. Printed in USA. The Dal-Tile logo is a Registered Trademark of Dal-Tile Corporation, Dallas, TX Registered Trademark of Noble Company, Grand Haven, MI.TMTrademark of Noble Company, Grand Haven, MI.File #DT102016-14 11/16 Supersedes DT032016-57
Dal-Tile offers contractor training programs focusing on installation methods used with Dal-Seal products in commercial and residential applications. The programs are specifically designed to help tile contractors: Avoid costly callbacks Improve installation efficiency; optimize time, energy, and money Maximize shower sales
