Transcription
Chimney Lining Systems
Z-VENT Z-FLEX Aluminum Liner Kits and ConnectorsAluminum Chimney Gas Liner Kits GAS APPLICATIONSZ-FLEX Aluminum Chimney Liner Kits come complete with everything needed to quickly andeasily install a professional venting system.Z-FLEX liner is manufactured using a dead soft aluminum strip which is spirally wound andmechanically joined together forming an air-tight and leakproof Triple Lock seam.Z-FLEX ’s specially designed corrugations provide excellent flexibility whilemaintaining superior crush strength. The result is a clearly superior productoffering incredible longevity.Aluminum Liner Kit Includes:2-Ply Aluminum LinerChimney FlashingRain CapMortar Collar3 ScrewsPart No.: 2GACKITDia.: Lgth.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”Lengths: 15’ - 50’Gas Fireplace Kit Includes:2-Ply Aluminum LinerChimney FlashingRain CapFireplace Adapter (Single Appliance)3 ScrewsPart No.: 2GAFKXXDia.: Lgth.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”Lengths: 15’ - 50’ Patented Triple Lock design for strength Right sized packaging to lower shipping costs Best available materials/alloysPage 1 40 years of manufacturing experience “Immediate” availability (24–72 hour lead time) Listed by Underwriters Laboratories
Z-FLEX Chimney Liner SystemsZ-FLEX Insul-liner Pre-Insulated Chimney Liner for Category 1 Gas Heating Equipment & Gas Fireplacesis another “simple solution” from Z-FLEX . The National Fuel Gas Code (NFPA 54, ANSI Z223.1)recommends that liners be insulated in certain situations. A good rule of thumb is to use an insulated liner in exterior chimneys or when a brick chimney has no clay liner atall. The insulation will keep the flue gases warm to prevent condensation. Also refer to the equipment manufacturer’sinstructions for their recommendations. Insul-Liner replaces B-Vent when relining a masonry chimney. Insul-Liner is insulated at the factory and protected with an outer aluminum jacket. This eliminates the time neededto insulate on the job site and prevents damage to the insulation during installation. Simply remove from the box and Insul-Liner install.Insul-liner Kit Includes:Insulated Aluminum LinerChimney FlashingRain CapMortar Collar3 ScrewsPart No.: 2GIAKXXDia.: Lgth.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”Lengths: 15’Insul-liner Gas FireplaceKit Includes:Insulated Aluminum LinerChimney FlashingRain CapFireplace Connector3 ScrewsPart No.: 2GIAFKXDia.: Lgth.:Dia.: 4”, 5”, 6” Lengths: 15’Fireplace ConnectorGas Fireplace Kits only.Part No.: 2ZSCPRPDia.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”Nose ConePart No.: 2NCXXXXDia.:Dia.: 3”, 4”, 5”, 6”, 7”,8”, 10”Galvanized YPart No.: 2GAYXXXDia.: Lgth.:Dia.: 3”, 4”, 5”, 6”,7”, 8”Connects two vent connectors tocommon vent.Liner CouplingPart No.: 2CNNTRGDia.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”Custom sizes available. Used toattach two lengths of vent.Universal B-VentConnectorPart No.: 2CNNBFCDia.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”Connects any B-Vent to Z-FLEX liner.AdditionalLength Aluminum2-Ply LinerPart No.: 2GAXXXXDia.: Lgth.:Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”Available in multiples of 5’ to 50’.Page 2
Z-VENT Z-FLEX Features and BenefitsZ-Flex Triple Lock - Manufactured from 316Ti,titanium stabilized, nickel, chromium, molybdenumstainless steel. Excellent resistance to the corrosive effectsof flue gases. Suitable for extended periods at elevatedtemperatures without compromising corrosion resistance. Asuperior 29-4C grade stainless steel option is also availablefor conditions requiring greater resistance to acidic attack.Construction - Triple Lock Joint System; acknowledgedto be the best available for strength and longevity. Stainlesssteel strip is spirally wound and mechanically joined togetherforming an air tight and leakproof Triple Lock seam.Patple ente-LdAiocrtkCon ightstructionTriThe corrugated outer wall provides crush protection duringinstallation. The thin walled corrugated construction conductsheat quickly, aiding draft and discouraging the buildup ofsoot and other potentially corrosive residue.Dimensions - Available in a range of sizes suiting allapplications, from 2” to 24” diameter. Supplied in standardlengths up to 50 ft.Triple Lock Smoothcore Construction - Twin Strip (2ply) construction. The corrugated outer wall provides crushresistance during installation. The inner wall is smooth,permitting the smooth flow of flue gasses and impeding thebuild up of soot and other potentially corrosive residue. Theinner and outer walls are joined by a Triple Lock JointSystem; acknowledged to be the best available for strengthand longevity.Approval - Z-Flex Triple Lock Chimney LinerSystems are listed and labelled by Underwriters Laboratoriesto UL1777 and ULC S635, Chimney Lining Systems forexisting Masonry and Factory Built Chimneys.Warranty - Lifetime Limited Warranty.When to Z-FLEX a ChimneyWhen a masonry chimney has no liner at all When damage to existing chimney lining is evident When retrofit appliance has fan-assisted combustionand is vented alone Page 3When additional or replacement equipment is installedor an appliance is converted to gas from another fuel When the existing chimney is oversized relative toheating requirement
Z-FLEX Chimney Liner SystemsSmoothcore Triple Lock Liner eliminates turbulence inherent with corrugatedliners, improving draft. Resists corrosive attack by not impeding the flow of condensate downthe liner. Less opportunity for soot to accumulate.Z-Max Rain Cap andTop Support FlashingTriple Lock LinerZ-Lok TeePage 4
Z-VENT Z-FLEX Stainless Steel Chimney KitsEverything you need to get the job done rightTriple Lock Stainless Steel ALL FUEL APPLICATIONS Z-FLEX Stainless Steel Chimney Liner Kits come complete with everything youPellet Woodneed to quickly and easily install a professional venting system.Gas Patented Airtight Triple Lock ConstructionIdeal for use with gas, oil, pellets and wood. (For use with coal, see warranty). Thepatented Triple Lock construction is tested and listed by U.L. Triple Lock is acceptedby industry as the strongest joint system available. Manufactured from special high temperature and acid 316Ti resistant stainless. Z-FLEX ’s specially designed corrugations provide excellent flexibility whilemaintaining superior crush strength. The result is a clearly superior product offeringincredible longevity.Oil & Gas KitIncludes:All Fuel KitIncludes:All Fuel InsertKit Includes:SmoothcoreKit Includes:Stainless SteelLinerChimney FlashingRain CapMortar CollarPart No.: 2OILKTXDia.: Lgth.:Dia.: 3”-24” Lengths: 50’Stainless Steel LinerChimney FlashingRain CapInsert ConnectorPart No.:2OILKTX IDia.: Lgth.:Dia.: 3”-24” Lengths: 50’Page 5Stainless SteelLinerChimney FlashingRain CapZ-Lok TeePart No.: 2ZFLKITDia.: Lgth.:Dia.: 3”-24” Lengths: 50’Smoothcore Stainless Steel LinerChimney FlashingRain CapZ-Lok TeePart No.: 2ZFSCKITDia.: Lgth.:Dia.: 5”-8” Lengths: 50’Pellet KitIncludes:Stainless SteelLinerChimney FlashingRain CapPellet TeePart No.: 2ZFLKIT PDia.: Lgth.:Dia.: 3”-4” Lengths: 50’UniversalAll Fuel KitIncludes:Stainless SteelLinerChimney FlashingRain CapDripless ConnectorRigid Stacking TeePart No.:2ZFLKTODia.: Lgth.:Dia.: 3”-24” Lengths: 50’Oil
Z-FLEX Chimney Liner SystemsTriple Lock Stainless Steel Flex Liner & AccessoriesALL FUEL APPLICATIONS2” Fresh Air Kit for Pellet Stoves4” Fresh Air Kit for Pellet StovesKit includes:1 - 2” x 5’ Aluminum 1 ply duct1 - 2” intake hood w/screen2 - 2” gear clampsPart No.: 2FAKIT0205Kit includes:1 - 4” x 5’ Aluminum 1 ply duct1 - 4” intake hood w/screen2 - 4” gear clampsPart No.: 2FAKIT0405Triple Lock Stainless SteelFlex LinerTriple Lock Smoothcore FlexLinerLock N’Go TeeZ-Lok TeePart No.: 2ZLSSXXDia.: Lgth.:Part No.: 2ZL294CDia.: Lgth.:Dia.: 2” – 24”Lengths: Up to 50’ or multiples of 5’.Part No.: 2ZFTCBDia.:Dia.: 3” – 24”Flex Ready Tee with GearClamp AssemblyOffset Adaptor 30 Part No.: 2ZOA30Dia.:Dia.: 3” – 10”Part No.: 2ZLSCXXDia.: Lgth.:Dia.: 5” – 8”Lengths: 5’ to 20 ft.Part No.: 2ZFTJDia.:Dia.: 3” – 24”Flex ready tool-lessconnection.Offset Adaptor 45 Part No.: 2ZOA45Dia.:Dia.: 3” – 10”Heavy WallFlex LinerPart No.:2ZLMHLXXDia.:Lgth.:Dia.: 3” – 8”Lengths: Up to 50’ or multiples of 5’.4” Flex Ready PelletTee with 3” BranchPart No.: 2ZPT43Connects Z-Flex to solid fuelinserts where space is minimal.Apply the right liner every time withLine Finder from Z-FLEX . Gas andOil Liner Finders make it fast and easyto match the right Z-FLEX productand size to the liner application.The convenient “slide rule” design issimple to use, portable, and foolproof.Page 6
Z-VENT Triple Lock Stainless Steel Flex Liner & AccessoriesALL FUEL APPLICATIONSZ-Max Deluxe Rain Cap & FlashingRain Cap: 2ZMRCSFlashing: 2AFCSDia.:Dia.: 3” – 10”Z-Max Rain Cap prevents moisture and debris entering thechimney. Pre-stressed base plate provides greater strengthunder snow load conditions. For use with flexible liner.Spark arrester meets California code.Extension for Z-MaxRaincapPart No.: 2ZMEXTDia.: 4” – 8”12” or 18” extensionInsulating Blanketw/ProtectiveCloth Wrap & Gear ClampsPart No.: 2INSKITDia.:Sold in 5,10, 25 ft kits.1, 2, 3, 4 ft lengths. Includes 2 gearclamps per 5’ section. 1/4”, 8lb. ceramic fiberinsulation with high temperature protective clothwrap. Resists damage during installation.Dripless Type “C”ConnectorInsert ConnectorNose ConeStainlessSteel OffsetBoxPart No.: 2CNNTRCDia.:Dia.: 3” – 24”Used to mate Z-FLEX Liner tostove-pipe or when connecting to afireplace insert.Part No.: 2NCXXXXDia.:Dia.: 3” – 24”To attach to liner, attachrope to cone and pullrope down chimney.Part No.: 2CNNIDia.:Dia.: 3” – 10”Used to connect flexible liner toinsert. Supplied with three tabsfor ease connection to insertfrom inside firebox.Part No.: 2ZFOFFSET6” onlyUsed to connect flex liner toinsert. One piece design. 6”center to center offset.All products are warranted to be free from all defects in material and workmanship. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore thebuyer and/or end users’ responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without priornotice. It is the buyer and/or end users’ responsibility to review our complete Terms and Conditions of Sale located on our web sites at: www.novaflex.com / www.z-flex.com / www.flexmaster.com.Page 7
Z-FLEX Chimney Liner SystemsRigid Liner & Accessories ALL FUEL APPLICATIONSRigid Stacking TeeStainless Steel RigidLinerPart No.: 2ZRBTXXDia.:Dia.: 3”-24”Tees haveremovable clean-out caps andremovable long nose spout.NOTE: 3” and 10”-24” nosespouts are not removable.Part No.: 2ZR321FDia.: Lgth.:Dia.: 5” – 24”Fusions welded seams.Close tolerance fit.1ft, 2ft, 3ft, 4ft lengths.Rain CapPart No.: 2RNCAPSDia.:Dia.: 5” – 24”For use with rigid linerSpark arrester meets California codeReducer/IncreaserReducer Part No:2RD R XIncreaser Part No.2IN R XNote flow direction.Stainless SteelSelf-DrillingScrewsPart No.: 2SSSCREW90 Adjustable ElbowPart No.: 2RE90XXDia.:Dia.: 5” – 24”Stainless SteelChimneyFlashing Starter Collar16” x 16” BasePart No.: 2ZSCSXXDia.:Dia.: 3” – 24”Used to cover chimney top opening.45 AdjustableElbowPart No.: 2RE45XXDia.: Lgth.:Dia.: 5” – 24”Top SupportPart No.: 2ZTSXXXDia.:Dia.: 3” – 24”For use with flex liner andflashing.Female AdapterRigidPart No.: 2ZRBTADia.:Dia.: 4” – 8”Adapts male tee banchto male smoke pipe.Page 8
Z-VENT Aerocowl Flue StabilizerAerocowl Flue Stabilizer is aerodynamicallydesigned so that when fitted to structurallysound chimneys and flues, completelyeliminates down-draft. Aerocowl preventstroublesome smoke and toxic fumes fromcirculating within the home.Aerocowl built-in bleeding system reducesexcessive fuel burning for all types of heatingappliances whether solid fuel, oil, gas orwood-burning, resulting in significant savingsin energy consumption.AerocowlUniversal BaseStainless Steel AerocowlRound BasePart No.: 2ARCOUBStainless SteelAerocowlPart No.: 2ARCORBDia.:Dia.: 4”, 5”, 6”, 7”, 8”,10”Part No.: 2ARCOWL BDia.: 12”, 18”Saves Fuel - SavesMoneyAfter fitting an Aerocowl, testing found a minimum saving of 12% and in some cases upto 30% .Easily InstalledSimple installation. Just locate on to chimney, and secure. Available in three sizes to fit alldomestic chimneys and flues.Doubles as a Rain CapPrevents rain, snow or sleet entering the chimney or flue.Reduces CondensationAerocowl improves ventilation and reduces condensation.Aesthetic DesignAerodynamic design; blends in naturally with surroundings.Long Service LifeComprehensive Accelerated Corrosion Testing rates an average life expectancy of 12 RIBLEEDSYSTEMBLEEDSYSTEMEXHAUST GASESPage OILVENTURIBLEEDSYSTEMEXHAUST GASESEXHAUST GASES
Z-FLEX Chimney Liner SystemsOval Liner System All Fuel ApplicationsStainless Steel Oval KitKit includes:1- 25 ft Oval SectionOval RaincapOval FlashingOval Dripless ConnectorOval Base TeePart No.: 2OVKIT 255 ft and 10 ft oval sections available. Driplessconnector required to join oval sections.FlexibleS/S OvalTo RoundPart No.: 2ZLSSORDia.: Lgth.:Dia.: 6”, 7”, 8”, 10”5 ft to 10 ft available. Ovalaccessories availableStainless SteelDripless Type “A”Oval ConnectorRound to OvalAdapterOval Raincapwith Spark ArrestorFlat Flashing Oval 6”Part No.:(2ZMRCOV )Dia.:Dia.: 6”, 7”, 8”, 10”5”6”7”8”Part No.: 2CNNTRAOV: Dia.:Dia.: 6”, 7”, 8”, 10”Used to join Z-FLEX Oval Liner toOval T-Section and Oval to Oval Lineror when going through a fireplaceadapter.Oval To RoundAdapterPart No.: 2ZRORAXDia.:Dia.: 6”, 7”, 8”, 10”Z-Flex Stainless Steel LinerOval Dimensions (Approximate)Round Size Oval Size O.D.Part No.: 2ZRROAXDia.:Dia.: 6”, 7”, 8”, 10”4 1/4” x 7 3/4”4 1/2” x 8 3/8”4 3/4” x 9 1/2”5” x 11”Stainless SteelSingle Oval Base/TeePart No.: 2ZRBTOXDia.:Dia.: 6”, 7”, 8”, 10”Flexible S/SFull OvalPart No.:2ZLSSOXDia.: Lgth.:Dia.: 6”, 7”, 8”, 10”Note: Oval accessories available.Part No.: (2ZSCO1806)18 X 18Dia.:Dia.: 6”, 7”, 8”, 10”Page 10
Z-VENT DIRECT VENT SystemA Completely Sealed System that does not Compromise Indoor Air QualityDesigned for use when converting existingwood-burning fireplaces into gas fireplacesIn terms of safety, efficiency and versatility, DirectVent fireplaces have several advantages overtraditional fireplaces.Using indoor air for combustion can de-pressurizethe living space and potentially pull harmful fluegases back into the home. Direct Vent Systems useoutdoor air instead of indoor air for combustion.Outside air is drawn in for combustion while fluegas is exhausted outside. The natural flow of heatcreates a convection loop; as hot air exits the pipe,cooler, denser air is pulled back to the burner.Direct Vent Insert Kits include: Two Triple Lock Gas Liners for flue exhaust and outside combustionair, and either an extreme weather or decorative co-linear termination.Decorative KitDirect Vent Co-Linear FlexibleLiner Kit with Decorative Cap/Flashingincludes: Chimney Liners (Exhaust and Intake) Decorative Cap/Flashing High Temperature RTV Sealant Self-Tapping ScrewsPage 11Extreme Weather KitDirect Vent Co-Linear FlexibleLiner Kit with Extreme WeatherCap/Flashingincludes: Chimney Liners (Exhaust and Intake) Extreme Weather Cap/Flashing High Temperature RTV Sealant Self-tapping Screws
Z-FLEX Chimney Liner SystemsDIRECT VENT SystemSafety - Direct Vent Systems exhaust all products ofQuality - Z-Flex Triple Lock , regarded as the strongestcombustion outside maintaining higher indoor air quality.When fuel burns, releasing poisonous carbon monoxidebecoming dangerous when exposed to it for too long and inhigh concentrations. Direct Vent flue Systems are completelysealed from the interior of the building, therefore no harmfulflue gases are released into the living space.flexible duct construction method in the industry; providespiece of mind that flue gases are being safely ventedoutside the living space through continuous length flexiblegas vent. In addition, computer added design andconstruction methods help produce aesthetically pleasingand efficient system components.Efficiency - Direct Vent Fireplace Systems burn natural gasVersatility - Direct Vent Systems are easy to install.Continuous length Triple Lock Flexible Gas Vent providesonly two connection points; Insert and Termination. TheFlexible Venting is quickly and easily routed through straightor offset existing masonry chimneys. Extreme Weather andDecorative Terminations are available for any installation.or propane, unlike tradition fireplaces, converting most ofthe fuel to usable heat. They are completely sealed off fromthe interior rooms by a glass door, which prevents significantheat loss.Z-Flex Direct Vent SystemsPart IDDescriptionExhaust sizeIntake size2DVI335DDV Co-Linear 3/3 Decorative Kit X 35 Ft3 in.3 in.2DVI335XDV Co-Linear 3/3 Extreme Weather Kit X 35 Ft3 in.3 in.2DVI435DDV Co-Linear 4/3 Decorative Kit X 35 Ft4 in.3 in.2DVI435XDV Co-Linear 4/3 Extreme Weather Kit X 35 Ft4 in.3 in.Safety IssuesSince the federal government required modern heatingequipment to achieve higher efficiencies in 1992, safelyventing them has become more of a challenge. Today’s moreefficient equipment produces lower flue gas temperatures thanpre-1992 equipment. The low temperature flue gas provideslittle natural draft in chimneys and is more likely to condenseinto an acidic, and corrosive, solution. The result can causeproperty damage, personal injury, or death. The natural lawsof physics that control this phenomenon pertain to all gas andoil fired equipment.Our three major product lines; chimney liners, special gasvent (AL29-4C * stainless steel), and flexible vent connectorsare all designed to prevent flue gas condensation or protectagainst its corrosive effects. Most of the products Z-FLEX has developed are now recommended or required by thefollowing national codes and testing agencies:1992 National Fuel Gas CodeVenting Tables for sizing Chimney Liners and Vent Connectorswhen adding or replacing equipment. Insulated Connectorsrequired in attics and other “cold” spaces.1997 NFPA 31“Installation of Oil Burning Equipment” Venting Tables forsizing Chimney Liners.International Approval Services (Formerly AGA) June, 1996– IAS requires all Category III gas boilers and furnaces to usea UL 1738 approved vent system (as Z-VENT ). July, 1998 –IAS requires all Category III gas residential unit heaters to usea UL 1738 approved vent system(as Z-VENT ).Page 12
Z-VENT Coaxial FLEXIBLE Direct Vent Kits Z-Flex DVK Kits are designed to ease gas burning fireplace or insert installationsAllows for a completely sealed system that does not compromise indoor air qualityKit includes two TRIPLE LOCK flexible vents, one for flue exhaust, the other for combustion airAvailable in coaxial vertical extreme weather, horizontal round or square termination optionsVerticalModel DVK-VXCoaxial Flexible Direct Vent Kit withVertical Extreme Weather TerminationKit also includes:Coaxial Flexible VentSpacers & SupportsFire Stop/Insulation ShieldInsulation CollarRigid Pipe with Roof SupportFlashing for 0 to 30 Pitched RoofStorm Collar/SupportHigh Temperature SealantSelf-Drilling ScrewsHorizontalModel DVK-HRCoaxial Flexible Direct Vent Kitwith Horizontal ROUNDTerminationKit also includes:Coaxial Flexible VentSpacers & SupportsHigh Temperature SealantSelf-Drilling ScrewsModel DVK-HTCoaxial Flexible Direct Vent Kitwith Horizontal SQUARE TerminationKit also includes:Coaxial Flexible VentSpacers & SupportsHigh Temperature SealantSelf-Drilling ScrewsZ-Flex Coaxial FLEXIBLE Direct Vent KitsPart ID2DVK(305, 406, 407, 508, 811) (05,10,20,40)VX2DVK(305, 406, 407, 508, 811) (05,10,20,40)HR2DVK(305, 406, 407, 508, 811) (05,10,20,40)HTDescriptionDirect Vent Kit Vertical Extreme Weather TerminationDirect Vent Kit Horizontal ROUND TerminationDirect Vent Horizontal SQUARE Termination*Select appropriate coaxial vent diameters in inches; (305,406,407,508,811) and length in feet;(05,10,20,40)when ordering, additional lengths available upon requestPage 13
Z-FLEX Chimney Liner SystemsCoaxial FLEXIBLE Direct Vent KitsDVK KitsAccessory KitsCoaxial Flexible Extension KitP/N’s: 2DVK (305, 406, 407, 508, 811) 20XCoaxial Flexible Coupling20 Ft. Coaxial Flexible VentSpacers & SupportsSealant & Self-drilling ScrewsCoaxial Flexible Coupling Kit P/N’s:2DVK (305, 406, 407, 508, 811)CCoaxial Flexible CouplingSealant & Self-drilling ScrewsCoaxial Flexible Spacer Kit (10/kit)P/N’s: 2DVK (35, 46, 47, 58, 81)SAdaptor DV 4/6.625 to Flex 4/7 Kit P/N: 2DVK407A orAdaptor DV 5/8 to Flex 5/8 Kit P/N: 2DVK508AAdaptorSealant & Self-drilling ScrewsCoaxial Flexible Support Kit (5/kit)P/N’s: 2DVK (05, 06, 07, 08, 11)SUPWall Thimble (for 4” to 7” thick walls)P/N’s: 2DVK (05, 06, 07, 08, 11)WTWall Thimble Extended (for 6” to 11” thick walls)P/N’s 2DVK (05, 06, 07, 08, 11) WTESiding Standoff P/N’s: 2DVK (05, 06, 07, 08, 11)SSTypical Vertical Installation: 2DVK-VXFire Stop P/N’s: 2DVK (05, 06, 07, 08, 11)FSFire stop sealant is field suppliedFire Stop/Insulation Shield & Insulation Collar KitP/N’s: 2DVK (05, 06, 07, 08, 11)FSISFire stop sealant is field suppliedFlashing 30 to 45 Degree Pitched RoofsP/N’s: 2DVK (05, 06, 07, 08, 11)FTypical Horizontal Installation: 2DVK-HRRigid Extension Pipe Kit P/N’s: 2DVKRE(35, 46, 47, 58, 811)30” Long Rigid Exterior & Flexible Inner Pipe with Male ConnectorGuy BandSealant & Self-drilling ScrewsSealant P/N: 2DVKSPage 14
Z-FLEX The Flexible VentingSolutions SpecialistZ-FLEX , part of the Novaflex Group of companies, is the leadingmanufacturer of specialty venting systems for furnaces, boilers,water heaters, oil heaters, fireplaces, and more.Z-FLEX has been providing flexible answers to gas oil, pellet andwood venting applications since 1979. We have pioneered flexible chimneyliner solutions and special gas vent (AL 29-4C ).* A variety of innovationsin materials and construction have led to products that deliver: Superior performance and increased efficiency Easier handling and faster, simpler installation Greater reliability, safety and increased service lifeTo that, we add responsive customer service and expert technical support.The NovaFlex Group is a privately held company committed to continuous advancement inventing, HVAC, hose and connector solutions. NovaFlex has one of the broadest product rangesavailable in the hose and ducting marketplace as well as in the HVAC, Industrial Venting and HoseIndustries and in Commercial Exhaust Venting Systems.*AL 29-4C is a registered trademark of Allegheny Ludlum Corp. U.S.A. CANADA20 Commerce Park North452 Attwell DriveBedford, New Hampshire 03110-6911Etobicoke, ON M9W 5C3tel: 603.669.5136 fax: 888.889.3539tel: 416.679.0045 fax: 416.679.0051www.z-flex.com email sales@z-flex.comVer: 05.2018
Z-E Page 1 Aluminum Chimney Gas Liner Kits GAS APPLICATIONS Z-FLEX Aluminum Liner Kits and Connectors Z-FLEX Aluminum Chimney Liner Kits come complete with everything needed to quickly and easily install a professional venting system. Z-FLEX liner is manufactured using a dead soft aluminum strip which is spirally wound and mechanically joined together forming an air-tight and .
