Transcription
Section 2Series SSStainless Steel CylindersSeries SS 1-1/2" thru 8" Cylinder Features .ACT-2-2Ultra Cushion & Soft Touch Bumper Seal .ACT-2-3Technical Information.ACT-2-4Cylinder with 01 (MX0) Basic.ACT-2-6Cylinder with 02 (MS4) Bottom Tap .ACT-2-8Cylinder with 04 (MF1) Front Flange .ACT-2-10Cylinder with 05 (MF2) Rear Flange .ACT-2-12Cylinder with 06 (MP1) Cap Fixed Clevis .ACT-2-148" Cylinder with 10 (ME3) Head Square & 11 (ME4) Cap Square .ACT-2-16Cylinder with 15 (MT1) Head Trunnion .ACT-2-18Cylinder with 16 (MT2) Cap Trunnion.ACT-2-20Double Rod End Cylinder with 01 (MX0) Basic .ACT-2-221-1/2" thru 8" Cylinder Accessories .ACT-2-24Optional Features & Custom Cylinders.ACT-2-251-1/2" thru 8" Order Information.ACT-2-26Series SS 1-1/8" Cylinder Features .ACT-2-271-1/8" Cylinder with 01 (MX0) Basic, 03 (MS8) Bolt Thru,04 (MF7) Front Flange, 05 (MF2) Rear Flange .ACT-2-281-1/8" Cylinder with 17 (MP3) Fixed Eye, 22 (MS9) Side Tap,30 (MR1) Head Face .ACT-2-301-1/8" Double Rod End Cylinder with 01 (MX0) Basic .ACT-2-301-1/8" Cylinder Accessories & Optional Features.ACT-2-321-1/8" Order Information .ACT-2-33Switch Information .ACT-2-34ACT-2-6 –ACT-2-8 –ACT-2-10 –ACT-2-12 –ACT-2-14 –ACT-2-16 –Cylinder with01 (MX0)BasicCylinder with02 (MS4)Bottom TapCylinder with04 (MF1)Front FlangeCylinder with05 (MF2)Rear FlangeCylinder with06 (MP1)Cap Fixed Clevis8" Cylinder with10 (ME3)Head SquareACT-2-16 –ACT-2-18 –ACT-2-20 –ACT-2-22 –ACT-2-28 –ACT-2-28 –8" Cylinder with11 (ME4)Cap SquareCylinder with15 (MT1)Head TrunnionCylinder with16 (MT2)Cap TrunnionDouble Rod EndCylinder with01 (MX0) Basic1-1/8" Cylinderwith 01 (MX0)Basic1-1/8" Cylinderwith 03 (MS8)Bolt ThruACT-2-28 –ACT-2-28 –ACT-2-30 –ACT-2-30 –ACT-2-30 –ACT-2-30 –1-1/8" Cylinderwith 04 (MF7)Front Flange1-1/8" Cylinderwith 05 (MF2)Rear Flange1-1/8" Cylinderwith 17 (MP3)Fixed Eye1-1/8" Cylinderwith 22 (MS9)Side Tap1-1/8" Cylinderwith 30 (MR1)Head Face1-1/8" Double RodEnd Cylinder with01 (MX0) BasicBrookville, OH USAPhone 937-833-4033www.norgren.comACT-2-1
Series SS ActuatorsThe finest materials for each component!1 Piston Seals: Lip-type nitrile seals2 Piston: Solid aluminum alloy,are pressure energized and wearcompensating. Their excellent lubricationretention characteristics lower seal frictionand ensure long life.6 Piston Rod: 303 stainless steel,3 Head/Cap: Precision machined40,000 PSI minimum yield, hard chromeplated, ground and polished.from solid corrosion-resistant 304stainless steel bar.835 Rod Seals: Rounded lip-type urethane ispressure energized and wear compensating.light-weight for low inertia, yet strong.4 Rod Wiper: Lip-type urethaneaggressively wipes foreign material frompiston rod and enhances rod seal life.11235467910117131287 Ultra Cushion : State-of-the-artdesign features a unique, one-piece, nitrilecompound seal, captured within a precisionmachined groove. Linear and radial “float”of cushion seal eliminates misalignment.Ultra Cushions provide exceptionally fast“out of cushion” stroke reversal. (Head andCap Cushions are optional.)8 Adjustable Captive CushionNeedleAllows for safe and precise adjustmentunder pressure.9 Wear Strip: Teflon and graphitecomposition for minimum friction,maximum wear and side load resistance.(Magnetic band under wear strip optional.)1412 Retainer: Stainless steel snap ringsecurely retains bushing in head.13 Rod Bearings: Machined from 30410 Tube: Corrosion-resistant 304stainless steel.stainless steel, with a Teflon compositewear band insert that eliminates metal-tometal contact.11 Tie Rods: High-strength 303stainless steel maintains compressionon tube end seals.14 Acorn Nut: Tie rod threads arecovered by stainless steel acorn nuts whicheliminate another bacteria hiding place.Series DSeries D cylinders are designed for extremely smooth stroke performance on applications requiring very slow extensionand/or retraction speeds. They are identical to the Series SS in design, function and dimensions, but have “ELF” carboxylatednitrile piston seals, rod seals, and rod wipers.“ELF” carboxylated nitrile is a blend of Teflon and other low friction additives that are molded into the substrate of the base seal material.Incorporating this compound in the dynamic seals of the cylinder results in diminished friction, lower breakaway and superior stroke performance.Features: Extra smooth performance throughout the entire stroke of the cylinder. Available in standard SS series bore sizes.ACT-2-2Brookville, OH USAPhone 937-833-4033 NFPA interchangeable. Cylinders rated to 250 PSI air.www.norgren.com
Series SS ActuatorsUltra Cushion A Major Design and Performance Breakthrough in Air Cylinder Cushioning Systems!Norgren’s state-of-the-art cushion design features a unique,one-piece, nitrile compound seal that is captured within aprecision machined groove. This allows both linear andradial “float” of the cushion seal which virtually eliminatesproblems associated with misalignment. Integral flow pathsmolded in the periphery of the seal provide exceptionallyfast “out of cushion” stroke reversal without the use ofball checks.Figure 1Figure 2 shows spearexiting cushion seal.Soft Touch Bumper SealThe solution for noise pollution!Norgren’s Low Friction Soft Touch Bumper Seal, in conjunction with our state-of-the-artcushion design, decelerates and reduces end-of-stroke noise.Figure 1: Cylinder deceleration starts when the cushionspear enters the cushion seal, creating a chamber ofcompressed air metered by an optional AdjustableCushion Needle or Fixed Cushion (orifice).Figure 2: The final inertia load is absorbed by theBumper, providing that final end-of-stroke “Soft Touch”.11/2" 5" boreFigure 2Figure 1Note: 11/8" bore configuration.Operating PSI will control the reduction of total cylinder stroke.The chart shows the approximate average (new cylinder) strokereductions in inches based on PSI.Stroke length will vary based on PSI.Not recommended for applications that require 100% repeatablestroke increment.Bore0 PSI20 PSI40 PSI60 PSI80 PSI100 PSI1 1/8 ".12.08.06.03.0201 1/2 ".12.04.03.02.0102".12.10.06.03.0202 1/2 ".16.10.08.04.0203 06.020Available on 1-1/8" thru 5" bores.(Not available in 1-1/2" bore with 1" diameter rod.)Can be incorporated into cylinders with no cushions,fixed cushions or adjustable cushions.See ACT-2-26 for complete instructions on how to order cylinders.Brookville, OH USAPhone 937-833-4033www.norgren.comACT-2-3
Series SS ActuatorsAll Dimensions in Inches (mm)Operating Temperatures:Lubrication:Side Loading:Series SSNone requiredNorgren Air Cylinders are rated for “no lube added”service. All internal components are lubricated at timeof assembly with a Teflon based grease.Cylinders are specifically designed to push and pull.Side loading of the piston rod should be avoided toensure maximum operating performance and life.Care should be taken during installation toproperly align the load to be moved with the centerline of the cylinder. The use of a rod alignment coupler(see ACT-2-24) is strongly recommended wheneverpossible.Series Dwith Viton Seals-40 F to 200 F(-40 C to 93 C)-20 F to 250 F(-29 C to 121 C)-20 F to 400 F(-29 C to 204 C)Materials:Head and End Caps: 304 stainless steelTube: 304 stainless steelPiston Rod: hard chrome plated 303 stainless steelPiston: 2011-T451 aluminum with Teflon composite wearbandRod Bearings: 304 stainless steel with Teflon composite wearbandSeals: urethane rod seal and wiper, nitrile piston sealsTie Rods: 303 stainless steelOperating Pressure:250 PSIG Air (17.2 Bar)400 PSIG Hydraulic (27.6 Bar)Bore Sizes: 1-1/8", 1-1/2", 2", 2-1/2", 3-1/4",4", 5", 6", 8"Supply:Filtered compressed air to 250 PSIPetroleum based hydraulic fluid to 400 PSICylinder WeightsIn pounds (kilograms)Mounting CodeBoreRod01, 02, 03, 10, 11, 22 & 4 & 05*06 & 1715 & 91.0(41.27)83.2(37.73)2.3(1.04)*Weight includes pivot pinBreakaway Pressures in PSIListed are the average breakaway pressuresin PSI for all Series SS and Series D cylinderbore sizes.If your application requires a lowerbreakaway pressure than indicated for aparticular bore size, consult the factory.ACT-2-4Add Per Inchof StrokeBoreSS SeriesD SeriesExtendRetractExtend11/8"673Retract411/2", 2", 21/2"563431/4", 4"45235", 6", 8"3412Note: Breakaway pressures were established with the cylinders mounted horizontallyand no load on the piston rod.Brookville, OH USAPhone 937-833-4033www.norgren.com
Series SS ActuatorsAll Dimensions in Inches (mm)Piston Rod Diameter Selection:Applications requiring long extend (push) strokes may require oversize piston rod diameters to prevent buckling. To determine the correct rod diameter for yourapplication follow these simple steps:1. Select the thrust from the Cylinder Force and Volume Chart that is required for your application.Thrust Piston Surface Area x Operating Pressure2. From the Cylinder Mounting Diagrams select the mounting style being used.3. With the piston rod fully extended, calculate the value of D (in inches) using the formula shown or the cylinder mounting diagram selected in step #2.4. Locate the value of D (in inches) at the bottom of the Selection Chart. Enter the chart at this point and move vertically upward until intersecting with the horizontalline representing the required thrust which was selected in step #1. The band within which these lines intersect represents the minimum recommendedpiston rod diameter.Stop Tube Selection:Stop tubes enhance the transverse load carrying capability of a long stroke cylinder by increasing the distance between the piston and rod bearing at full extension. Whenthe value of D (calculated from the piston rod diameter selection instructions above) is less than 40", a stop tube is not required. However, if D is 40" or more, 1" of stoptube is recommended for every 10" (or fraction thereof) over 40".Cylinder Mounting DiagramsFirmly Guided Rod EndHead TrunnionUnsupported Rod EndSDSSD 4SD DD 1/2SSupported Rod EndD SdSupported Rod EndFirmly Guided Rod EndUnsupported Rod EndSSD 1/2SD SCap Clevis or Cap TrunnionSDD 4SD DdSelection ChartCylinder Force and Volume ChartsExtend Forces in pounds (newtons)Bore5000040000150 (10)149 (664)200 (14)200 (890)VolumeCu Ft (cm3)DisplacementPer Inch(16).00057177 (786)266 (1179)353 (1570).00102(29)314 (1398)471 (2097)628 (2793).00182(52)737 (3277)982 (4368).00284(80)1245 (5538)1659 (7379).00480(136)11/8"PistonArea.99 (6.41)PSI (bar)80 (6)100 (7)80 (354)99 (442)4040(3)(177)60 (4)60 (265)11/2"1.77 (11.40)71(315)106 (472)142 (629)2"3.14 (20.27) 126(559)189 (839)251 (1119)21/2"4.91 (31.67) 196(874)295 (1311)393 (1748)491 (2185)31/4"8.30 (53.32) 332(1477)498 (2215)664 (2953)830 (3692)4"12.57 (81.07) 503(2237)754 (3355)1005 (4473)1257 (5592)1886 (8388)2513 (11178).00727(206)5"19.64 (126.71) 785(3491) 1178 (5240)1571 (6988)1964 (8736)2946 (13104)3928 (17472).01137(322)6"28.27 (182.39) 1130(5026) 1696 (7544)2262 (10061) 2827 (12574) 4240 (18860)5654 (25149).01837(520)8"50.26 (324.26) 2010(8940) 3015 (13411) 4020 (17881) 5026 (22356) 7539 (33533) 10052 00020001000Deduct these Forces for Retract StrokesRod(.72)405(3)(20)60 (4)7 (30)PSI (bar)80 (6)100 (7)9 (40)11 (50).196 (1.26)8(35)12 (52)16 (70)20 (87).307 (1.98)12(53)18 (80)25 (111)31 (138).785 (5.06)31(138)47 (209)63 (280)70 (351)13/8"1.485 (9.58)59(262)89 (396)119 (529)149 (663)13/4"2.404 (15.51)95(423)144 (641)192 (854)240 (1068)3/ "81/ "25/ "81"RodArea.112800150 (10)17 (75)200 (14)22 (100)30 (131)VolumeCu Ft (cm3)DisplacementPer Inch(2).000076005004003001-3/4"20039 (174).00011(3)46 (205)61 (271).00018(5)118 (525)157 (698).00045(13)100222 (997)297 (1321).00086(24)360 (1601)480 ialthrustin lbsValue of D in inchesBrookville, OH USAPhone 937-833-4033www.norgren.comACT-2-5
Series SS ActuatorsActuator with 01 (MX0) Basic NFPA (MX0) 01 Basic Mountavailable in 1-1/2" thru 8" bore sizes. Precision machined 300 Seriesstainless steel components. Cylinders rated to 250 PSI air,400 PSI hydraulic (non-shock). Designed for non-lube service. Switches available on all bore sizes.(See pages ACT-2-34/35 for ordering information.)Cylinder Order Information 1SD234– 0 1567–8 910 11 12 13Series SSSeries DBore11/2"2"21/2"31/4"4"5"6"8"No Options00MagneticPiston Only**90Special 98**See ACT-2-34/35. For any cylinder modifications notlisted use “98” and please specify.Single Rod EndCDEFGLJMOptional SealsNo OptionViton SealsAir/Oil SealMetallic Rod ScraperSoft TouchSpecialFull Inches in Strokes000" Stroke011" Stroke022" Stroke033" Stroke044" Stroke055" Stroke066" Stroke.99xx99" StrokeSpecialFractional Increments of 7/16"TXSpecialRod Size & StyleStandardA Male KKB Male CC*C Full Dia. Thd.D Female XXE StuddedX SpecialCushionsNeedle PositionNo CushionsHead OnlyCap OnlyHead and "15/16"2†BGNCHM2BG3CHBrookville, OH USA10111516XX(As viewed fromrod end)Phone 937-833-4033DJPEKR4DJXHead Square (ME3)*Cap Square (ME4)*Head Trunnion (MT1)Cap Trunnion (MT2)Special1423See ACT-2-26 for complete instructions on how to order cylinders.ACT-2-64UXPort and CushionNeedle Positions*On 11/2", 2" & 21/2" Bore Sizes with5/8" Rod, CC 7/16 - 20 (NFPA)3AStandard al†Standard position*NFPAMounting Options01 Basic (MX0)02 Bottom Tap (MS4)04 Front Flange (MF1)05 Rear Flange (MF2)06 Cap Fixed Clevis (MP1)*8" Bores OnlyOversizedHMale KKJMale CCKFull Dia. Thd.M Female XXNStudded1A1356Xwww.norgren.com
Series SS ActuatorsAll Dimensions in Inches (mm)EE NPT (2) B BushingYYP Stroke MMKKThds.AStandard& Optional Rod EndsKK Thds.DAcrossFlats BZB Stroke BCCThds.KLB StrokeVFREESq. BJGCDAcross Flats BXXThds.FFThds.XXThds. BA DeepAACVF(Small Male)CVFStyle #1AACCVFStyle #2(Optional Male)CVFVFStyle #3Style #4(Small Female)(Optional Full Diameter Threads)Style #5(Optional Studded)Dimension11/2" Bore (38.10)2" Bore (50.80)21/2" Bore (63.50)31/4" Bore (82.55)4" Bore (101.60)5" Bore (127.00)6" Bore (152.40)8" Bore (203.20)ø Rod Std.(MM) 53).375(12.70).5007/16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(11.91).4691/2 – 203/4 – 22.23).8757/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.094 (129.39)5.469 16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(13.49).5311/2 – 203/4 – 22.23).8757/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.156 (130.96)5.531 16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(13.49).5311/2 – 203/4 – 22.23).8757/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.281 (134.14)5.656 57/8 –1411/4 – .70).5001 –1413/8 – 12(44.45)1.750(31.75)1.250(15.88).6253/4 – 161 – 144.250 1.0003/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 57/8 –1411/4 – 12(20.62).812(28.58)1.1254.500 (114.30)(9.53).375(12.70).5001 –1413/8 – 12(44.45)1.750(31.75)1.250(15.88).6253/4 – 161 – 144.250 1.0003/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 57/8 –1411/4 – 12(20.62).812(28.58)1.1255.500 (139.70)(9.53).375(12.70).5001 –1413/8 – 12(44.45)1.750(38.10)1.500(21.08).8303/4 – 161 – 144.500 (114.30)(73.03)2.8754.100 (104.14)(22.23).875(25.40)1.0003/4 – 161 – 14(61.90)2.437(68.25)2.6876.705 (170.31)6.955 .75011/4 – 1211/2 – 12(28.58)1.125(38.10)1.5006.500 (165.10)(12.70).500(19.05).75013/8 – 1213/4 – 12(50.80)2.000(38.10)1.500(21.08).8301 – 1411/4 – 125.000 (127.00)(76.20)3.0004.880 (123.95)(25.40)1.000(28.58)1.1251 – 1411/4 – 12(73.03)2.875(79.38)3.1257.455 (189.36)7.705 .75011/4 – 1211/2 – 12(28.58)1.125(38.10)1.5008.500 (215.90)(12.70).500(19.05).75013/8 – 1213/4 – 12(50.80)2.000(38.1)1.500(25.40)1.0001 – 1411/4 – 125.125 (130.18)(79.38)3.1256.435 (163.45)(25.40)1.000(28.58)1.1251 – 1411/4 – 12(73.03)2.875(79.38)3.1257.750 (196.85)8.000 (203.20)Brookville, OH USAPhone 937-833-4033www.norgren.comACT-2-7
Series SS ActuatorsActuator with 02 (MS4) Bottom Tap NFPA (MS4) 02 Bottom Tap Mountavailable in 1-1/2" thru 8" bore sizes. Precision machined 300 Seriesstainless steel components. Cylinders rated to 250 PSI air,400 PSI hydraulic (non-shock). Designed for non-lube service. Switches available on all bore sizes.(See pages ACT-2-34/35 for ordering information.)Cylinder Order Information 1SD234– 0 2567–8 910 11 12 13Series SSSeries DBore11/2"2"21/2"31/4"4"5"6"8"No Options00MagneticPiston Only**90Special 98**See ACT-2-34/35. For any cylinder modifications notlisted use “98” and please specify.Single Rod EndCDEFGLJMOptional SealsNo OptionViton SealsAir/Oil SealMetallic Rod ScraperSoft TouchSpecialFull Inches in Strokes000" Stroke011" Stroke022" Stroke033" Stroke044" Stroke055" Stroke066" Stroke.99xx99" StrokeSpecialFractional Increments of 7/16"TXSpecialRod Size & StyleStandardA Male KKB Male CC*C Full Dia. Thd.D Female XXE StuddedX Special11/2",CushionsNeedle PositionNo CushionsHead OnlyCap OnlyHead and CapFixedSpecial12†34DJPEKRABGNCHMUX†Standard rd position*NFPAMounting Options01 Basic (MX0)02 Bottom Tap (MS4)04 Front Flange (MF1)05 Rear Flange (MF2)06 Cap Fixed Clevis (MP1)*8" Bores OnlyOversizedHMale KKJMale CCKFull Dia. Thd.M Female XXNStudded2BG3CH10111516XX(As viewed fromrod end)21/2"Head Square (ME3)*Cap Square (ME4)*Head Trunnion (MT1)Cap Trunnion (MT2)Special14Phone 937-833-403323See ACT-2-26 for complete instructions on how to order cylinders.Brookville, OH USA4DJXPort and CushionNeedle Positions*On2" &Bore Sizes with5/8" Rod, CC 7/16 - 20 (NFPA)ACT-2-8A1356Xwww.norgren.com
Series SS ActuatorsAll Dimensions in Inches (mm)EE NPT (2) B BushingYP Stroke MMKKThds.ESq.AD(Flats)Standard &Optional Rod EndsKK Thds.DAcrossFlatsTNREJGCNT TapTK DeepKSN StrokeXTLB StrokeVFZB Stroke B B BCCThds. BXXThds.FFThds.XXThds. BA DeepAACVFStyle #1(Small Male)AACCVFCVFStyle #2(Optional Male)CVFVFStyle #3Style #4(Small Female)(Optional Full Diameter Threads)Style #5(Optional Studded)Dimension11/2" Bore (38.10)2" Bore (50.80)21/2" Bore (63.50)31/4" Bore (82.55)4" Bore (101.60)5" Bore (127.00)6" Bore (152.40)8" Bore (203.20)ø Rod Std.(MM) 125(38.10)1.500(9.53).375(12.70).5007/16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(11.91).4691/2 – 203/4 – 16(92.08)3.6251/4 – 2.3127/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.094 (129.39)5.469 16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(13.49).5311/2 – 203/4 – 16(92.08)3.6255/16 – )2.3127/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.156 (130.96)5.531 16 – 207/8 9.53).3755/8 –181 –14(38.10)1.500(25.40)1.000(13.49).5311/2 – 203/4 – 16(95.25)3.7503/8 – 2)2.3127/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.281 (134.14)5.656 57/8 –1411/4 – .70).5001 –1413/8 – 12(44.45)1.750(31.75)1.250(15.88).6253/4 – 161 – 144.250 (107.95)1/2 – 25)2.6873/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 57/8 –1411/4 – 12(20.62).812(28.58)1.1254.500 (114.30)(9.53).375(12.70).5001 –1413/8 – 12(44.45)1.750(31.75)1.250(15.88).6253/4 – 161 – 144.250 (107.95)1/2 – 25)2.6873/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 57/8 –1411/4 – 12(20.62).812(28.58)1.1255.500 (139.70)(9.53).375(12.70).5001 –1413/8 – 12(44.45)1.750(38.10)1.500(21.08).8303/4 – 161 – 144.500 (114.30)5/8 – 11(73.03)2.8754.100 ).875(25.40)1.000(61.90)2.437(68.25)2.6873/4 – 161 – 14(61.90)2.437(68.25)2.6876.705 (170.31)6.955 .75011/4 – 1211/2 – 12(28.58)1.125(38.10)1.5006.500 (165.10)(12.70).500(19.05).75013/8 – 1213/4 – 12(50.80)2.000(38.10)1.500(21.08).8301 – 1411/4 – 125.000 (127.00)3/4 – 10(76.20)3.0004.880 )1.000(28.58)1.125(71.42)2.812(77.77)3.0621 – 1411/4 – 12(73.03)2.875(79.38)3.1257.455 (189.36)7.705 .75011/4 – 1211/2 – 12(28.58)1.125(38.10)1.5008.500 (215.90)(12.70).500(19.05).75013/8 – 1213/4 – 12(50.80)2.000(38.1)1.500(25.40)1.0001 – 1411/4 – 125.125 (130.18)3/4 – 10(79.38)3.1256.435 (163.45)(82.55)3.250(28.58)1.1254.500 )3.0621 – 1411/4 – 12(73.03)2.875(79.38)3.1257.750 (196.85)8.000 (203.20)Brookville, OH USAPhone 937-833-4033www.norgren.comACT-2-9
Series SS ActuatorsActuator with 04 (MF1) Front Flange NFPA (MF1) 04 Front Flange Mountavailable in 1-1/2" thru 6" bore sizes. Precision machined 300 Seriesstainless steel components. Cylinders rated to 250 PSI air,400 PSI hydraulic (non-shock). Designed for non-lube service. Switches available on all bore sizes.(See pages ACT-2-34/35 for ordering information.)Cylinder Order Information 1SD234– 0 4567–8 910 11 12 13Series SSSeries DBore11/2"2"21/2"31/4"4"5"6"8"No Options00MagneticPiston Only**90Special 98**See ACT-2-34/35. For any cylinder modifications notlisted use “98” and please specify.Single Rod EndCDEFGLJ**See ACT-2-16/17for ME3 mountOptional SealsNo OptionViton SealsAir/Oil SealMetallic Rod ScraperSoft TouchSpecialFull Inches in Strokes000" Stroke011" Stroke022" Stroke033" Stroke044" Stroke055" Stroke066" Stroke.99xx99" StrokeSpecialFractional Increments of 7/16"TXSpecialRod Size & StyleStandardA Male KKB Male CC*C Full Dia. Thd.D Female XXE StuddedX SpecialCushionsNeedle PositionNo CushionsHead OnlyCap OnlyHead and CapFixedSpecial12†34DJPEKRABGNCHMUX†Standard rd position*NFPAMounting Options01 Basic (MX0)02 Bottom Tap (MS4)04 Front Flange (MF1)05 Rear Flange (MF2)06 Cap Fixed Clevis (MP1)*8" Bores OnlyOversizedHMale KKJMale CCKFull Dia. Thd.M Female XXNStudded2BG3CH10111516XXHead Square (ME3)*Cap Square (ME4)*Head Trunnion (MT1)Cap Trunnion (MT2)Special(As viewed fromrod end)14Phone 937-833-403323See ACT-2-26 for complete instructions on how to order cylinders.Brookville, OH USA4DJXPort and CushionNeedle Positions*On 11/2", 2" & 21/2" Bore Sizes with5/8" Rod, CC 7/16 - 20 (NFPA)ACT-2-10A1356Xwww.norgren.com
Series SS ActuatorsAll Dimensions in Inches (mm)FBEE NPT (2) B BushingYP Stroke MMKKThds.ERADAcross FlatsTFStandard &Optional Rod EndsKK Thds.DAcrossFlatsJKVFLB StrokeWUFFH B BGCZB Stroke BCCThds. BXXThds.FFThds.XXThds. BA DeepAACVFCVFStyle #1(Small Male)AACCVFStyle #2(Optional Male)CVFVFStyle #3Style #4(Small Female)(Optional Full Diameter Threads)Style #5(Optional Studded)Dimension11/2" Bore (38.10)2" Bore (50.80)21/2" Bore (63.50)31/4" Bore (82.55)4" Bore (101.60)5" Bore (127.00)6" Bore (152.40)8" Bore (203.20)ø Rod Std.(MM) 5(38.10)1.500(9.53).375(12.70).5007/16 – 207/8 9.53).375(7.92).3125/8 –181 1/2 – 203/4 – 0)1.0007/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.094 (129.39)5.469 16 – 207/8 9.53).375(9.53).3755/8 –181 1/2 – 203/4 – 4.125 0007/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.156 (130.96)5.531 16 – 207/8 9.53).375(9.53).3755/8 –181 1/2 – 203/4 – 4.625 0007/16 – 203/4 – 16(50.80)2.000(60.33)2.3755.281 (134.14)5.656 57/8 –1411/4 – .70).500(11.10).4371 –1413/8 – 4 – 161 – 144.250 (107.95)(66.68)2.625(70.10)2.7604.687 (119.08)5.500 .0003/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 57/8 –1411/4 – 12(20.62).812(28.58)1.1254.500 (114.30)(9.53).375(12.70).500(11.10).4371 –1413/8 – 4 – 161 – 144.250 (107.95)(66.68)2.625(84.33)3.3205.437 (138.10)6.250 .0003/4 – 161 – 14(61.90)2.437(68.25)2.6876.250 (158.75)6.500 1.625(38.10)1.50
ACT-2-2 Brookville, OH USA Phone 937-833-4033 www.norgren.com Series SS Actuators Tube: Corrosion-resistant 304 stainless steel. 10 The finest materials for each component! Piston: Solid aluminum alloy, light-weight for low inertia, yet strong. Head/Cap: Precision machined from solid corrosion-resistant 304 stainless steel bar.
