Transcription
Terapro VTS (unreinforced)MaterialEstimating Guide
Substrate PreparationPro Paste: 5-kg canTypical Paste Coverage: 0.13 kg/sf(1.4 kg/m2) per 1 mm of thicknessPro Prep 1-gal or 5-gal canNumber of pails needed:Deck Area (sf):Number of pails needed:Flashing Area (sf):FLASHING SYSTEMarea to becovered (sf)s/f coverageper unit# of unitsneededwaste factor*Primer Layer (concrete substrate)Pro Primer W (10-kg pail)Consumption (min): 0.037 kg/sfCoverage (min): 270 sf/pail 270 Flashing Layer (Base & Top Coats)Terapro Flashing Resin (10-kg pail)Consumption (min): 0.31 kg/sfCoverage (min): 32 sf/pail 32 Reinforcing Fleece (Pro Fleece)12” x 164’ (164 sf) 164 Finish LayerPro Color Finish (10-kg pail)Consumption (min): 0.046 kg/sfCoverage (min): 215 sf/pail 215 total # of unitsPro Catalyst Liquid(cups)(see catalyst chart)PailsCupsPailsCupsRollsPailsn/aCups1
Terapro VTS Unreinforced - Unoccupied SpacePro Color FinishTerapro VTS QuartzTerapro VTS Resin/VTS Quartz FillerPro Primer TConcrete SubstrateFIELD MEMBRANEarea to becovered (sf)Primer Layer (concrete substrate)Pro Primer T (10 kg pail)Consumption (min): 0.037 kg/sfCoverage (min): 270 sf/pails/f coverageper unit# of unitsneededwaste factor* 270 71 total # of unitsPro Catalyst Liquid(cups)(see catalyst ng LayerTerapro VTS Resin (10 kg pail)Consumption (min): 0.14 kg/sfCoverage (min): 71 sf/pailTerapro VTS Quartz Filler (50 lbs bag)Coverage (min): 71 sf/pail 71 Surfacing AggregateVTS Quartz (50 lbs bag)Consumption (min): 1 lb/sfCoverage: 50 sf/bag 50 Color Finish LayerPro Color Finish (10 kg pail)Consumption (min): 0.07 kg/sfCoverage (min): 144 sf/pail 144 BagsPailsn/aCups2
CATALYST FOR FLASHING & FIELDtotal # ofcups abovecups percontainertotal # of unitsPro Catalyst Liquid 10 Containers2.5 kg container (10 cups)WASTE AND OVERAGE FACTORSRESIN TYPE4” COVER9”COVER18” COVERPro Primer/Pro Color0.1 kg0.55 kg1.1 kgTerapro Flashing and Base Resin0.1 kg0.75 kg1.5 kgLAP TREATMENT OVERAGE FACTORS (avg. overage per fleece roll width in %)PRODUCT12”41”Terapro Flashing and Base Resin12%3.5%Pro Fleece17%5%Coverage quantities are based upon minimum weight and coverage requirements. The above estimates do not include provisions for crack/joint treatment, detailing, rough absorbent surfaces, or waste (including material required for saturation of disposable roller covers and fleece overlaps).To Ensure that an adequate quantity of material is purchased for a project, a waste factor should be included in all estimates. The contractor is bestqualified to determine actual waste factors.Pro Catalyst Liquid Mixing ChartsPro Catalyst Liquid Mixing ChartPro Primer W and Pro Primer TResin QuantityAmbient Temperature77ºF to 95ºF (25ºC to 35ºC)Ambient Temperature41ºF to 77ºF (5ºC to 25ºC)Ambient Temperature32ºF to 41ºF (0ºC to 1 kg (1 liter)2n/a4n/a6n/a10 kg (10 liters)n/a1n/a2n/a3Substrate temperature range for application of Pro Primers is 32ºF to 95ºF (0ºC to 35ºC).Pro Catalyst Liquid Mixing ChartPro Color FinishResin QuantityAmbient Temperature59ºF to 95ºF (15ºC to 35ºC)Ambient Temperature41ºF to 59ºF (5ºC to 15ºC)Ambient Temperature32ºF to 41ºF (0ºC to 1 kg (1 liter)2n/a4n/a6n/a10 kg (10 liters)n/a1n/a2n/a3Substrate temperature range for application of Pro Color Finish is 32ºF to 95ºF (0ºC to 35ºC).3
Pro Catalyst Liquid Mixing ChartSummer GradeTerapro Base Resin and Terapro Flashing ResinAmbient Temperature68ºF to 104ºF (20ºC to 40ºC)Resin QuantityAmbient Temperature59ºF to 68ºF (15ºC to 20ºC)tablespoonscupstablespoonscups1 kg (0.72 liter)2n/a4n/a10 kg (7.2 liters)n/a1n/a2Substrate temperature range for application of Summer Grade Parapro and Terapro resins is59ºF to 122ºF (15ºC to 50ºC).Pro Catalyst Liquid Mixing ChartWinter GradeTerapro Base Resin and Terapro Flashing ResinResin QuantityAmbient Temperature59ºF to 68ºF (15ºC to 20ºC)Ambient Temperature41ºF to 59ºF (5ºC to 15ºC)Ambient Temperature23ºF to 41ºF (-5ºC to 1 kg (0.72 liter)2n/a4n/a6n/a10 kg (7.2 liters)n/a1n/a2n/a3Substrate temperature range for application of Winter Grade Parapro and Terapro resins is23ºF to 77ºF (-5ºC to 25ºC).Pro Catalyst Liquid Mixing ChartTerapro VTS Resin/Filler (full batch with 10 kg of VTS Resin and full bag of VTS Filler)Ambient Temperature77ºF to 95ºF (25ºC to 35ºC)Ambient Temperature41ºF to 77ºF (5ºC to 25ºC)Ambient Temperature32ºF to 41ºF (0ºC to 5ºC)1 cup2 cups3 cupsSubstrate temperature range for application of Terapro VTS Resin is 32ºF to 122ºF (0ºC to 50ºC).Pro Catalyst Liquid Mixing ChartPro Paste ResinResin Quantity1 kg (0.72 liter)Ambient Temperature77ºF to 95ºF (25ºC to 35ºC)Ambient Temperature41ºF to 77ºF (5ºC to 25ºC)Ambient Temperature32ºF to 41ºF (0ºC to 2n/a4n/a6n/aSubstrate temperature range for application of Pro Paste Resin is 32ºF to 122ºF (0ºC to 50ºC).4
SiplastCustomer Service in1000 Rochelle Blvd.North America:Irving, Texas 75062Toll Free 1-800-922-8800469-995-2200Facsimile: 469-995-2205www.siplast.comIn Canada:201 Bewicke Ave., Suite 208Vancouver, BC,Canada V7M 3M7604-929-7687For information on SiplastRoofing and WaterproofingSystems, scan our QR Code.April 20195
Substrate temperature range for application of Summer Grade Parapro and Terapro resins is 59ºF to 122ºF (15ºC to 50ºC). Pro Catalyst Liquid Mixing Chart Winter Grade Terapro Base Resin and Terapro Flashing Resin Resin Quantity Ambient Temperature 59ºF to 68ºF (15ºC to 20ºC) Ambient Temperature 41ºF to 59ºF (5ºC to 15ºC) Ambient .
