Department: Calibration Laboratory ISO/IEC 17025 2017 Accreditation No. 035

Transcription

Department:Calibration LaboratoryName and Address:Organization NameAddressPhoneFaxE-MailISO/IEC 17025:2017035Accreditation No.Calibration Laboratory – Magnus Engineering and Maintenance Ltd.Faran 4, , Yavne 8122503, Israel 972-8-6599000 972-8-942-0858Lab@magnus-eng.comThe certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח Date of issue17.2.2019Version No. 4Page No.1of:6

Department:Calibration LaboratoryISO/IEC 17025:2017Accreditation No. 035Schedule of AccreditationItemScopeTypeSiteMeasurand Instrument, GaugeRange[Including margins](Does not include margins)CMC Expressed as an ExpandedUncertainty (95%)AP. מסת נוזלים מדי מסת נוזל Liquid Mass.Liquid Mass Meters2AP. מסת נוזלים , מיכלים שקולים מדי מסת נוזל Liquid Mass.Weighing Tanks, LiquidMass Meters3AT. מסת נוזלים , מיכלים שקולים מדי מסת נוזל Weighing Tanks, LiquidMass Meters4AP;TLiquid Volume.Liquid Tanks,Liquid Volume Meters]1 kg to 1600 kg]0.04 % O.R.Internal CalibrationProcedure 9Internal Procedure]1600 kg to 195000 kg]0.13 % O.R.Calibration ProcedureCalibration by means ofCoriolis flow meterAt flow rate ofCI-060.12 kg/min to 1300 kg/minLiquid Mass.Remarks כיול – כיול מכשירים ווֹלּומֶ ְט ִריים – נפחים גדולים Calibration - Large Volume Volumetric Instruments1Reference DocumentsISO 10790[1 kg to 195000 kg]0.13 % O.R.Calibration ProcedureAt flow rate ofCI-060.12 kg/min to 1300 kg/min. נפח נוזלים , מיכלים למדידת נפח נוזלים מדי נפח נוזלים Calibration by means ofCoriolis flow meterISO 10790[1 L to 195000 L]0.14 % O.R.Calibration ProcedureAt flow rate ofCI-060.12 L/min to 1300 L/minCalibration by means ofCoriolis flow and densitymeter.ISO 10790Site: P or T or M , P-Permanent, T-Temporary, M-MobileType of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory'sapproved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.Date of issue17.2.2019Version No. 4Page No.2of:6The certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח

Department:Calibration LaboratoryISO/IEC 17025:2017Accreditation No. 035Schedule of AccreditationItemScopeTypeSiteMeasurand Instrument, GaugeRange[Including margins](Does not include margins)CMC Expressed as an ExpandedUncertainty (95%)Reference Documents נוזל ואויר , זרימה - גדלים פיזיקליים - כיול Calibration - Physical Quantities - Liquid and Air Flow5APLiquid Mass Flow rate,6AP7APLiquid Mass Flow rateMeter8AP9AP;TLiquid Mass Flow rate,10AP;TLiquid Mass Flow rateMeter11AP;T12AP13Liquid Volume Flow rate,Liquid Volume Flow rateMeter14AP15AP16AP;TLiquid Volume Flow rate,17AP;T18AP;TLiquid Volume Flow rateMeter19AP;TGas Mass Flow rate,20AP;TGas Mass Flow rate Meter21AP;T22AT23AP;T, ספיקת נוזלים מסתית מד ספיקה מסתית לנוזלים , ספיקת נוזלים מסתית מד ספיקה מסתית לנוזלים , ספיקת נוזלים נפחית מד ספיקה נפחית לנוזלים , ספיקת נוזלים נפחית מד ספיקה נפחית לנוזלים Gas Volume Flow rate,Gas Volume Flow rateMeter, ספיקת גזים מסתית מד ספיקת גזים מסתי , ספיקת גזים נפחית מד ספיקת גזים נפחי Remarks[3.6 g/min to 30 g/min]0.09 % ORCalibration Procedure[0.03 kg/min to 60 kg/min]0.03 % ORCI-02, CI-05)60 kg/min to 300 kg/min]0.04 % ORISO 10790)300 kg/min to 1300 kg/min]0.05 % OR(3.6 g/min to 30 g/min)0.40 % OR(30 g/min to 120 g/min)0.14 % ORCI-03, CI-04[0.12 kg/min to 1300 kg/min]0.11 % ORISO 10790[3.6 mL/min to 30mL/min]0.10 % ORCalibration Procedure[0.03 L/min to 60 L/min]0.04 % ORCI-02, CI-05ISO 10790(60 L/min to 300 L/min]0.05 % OR(300 L/min to 1300 L/min]0.06 % ORCalibration Procedure(3.6 mL/min to 30 mL/min)0.40 % ORCalibration Procedure(30 mL/min to 120 mL/min]0.15 % ORCI-03, CI-04[0.12 L/min to 1300 L/min]0.12 % ORISO 10790(6 mg/min to 12 mg/min)0.70 % ORCalibration Procedure(0.06 g/min to 3.6 g/min)0.65 % ORCI-07(3.6 g/min to 960 g/min)0.60 % OR(3.6 g/min to 900 kg/min)0.60 % OR(5 to 5000) mL/min0.50 % ORCalibration ProcedureCI-07Calibration by means ofweighingCalibration by means ofCoriolis flow meterCalibration by means ofweighing and densitycalibrationCalibration by means ofCoriolis flow meterFlow rates values may beconverted to other units bytaking into account relevantreference conditions.Calibration by means ofPiston proverFlow rates values may beconverted to other units bytaking into account relevantreference conditions.Site: P or T or M , P-Permanent, T-Temporary, M-MobileType of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory'sapproved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.Date of issue17.2.2019Version No. 4Page No.3of:6The certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח

Department:Calibration LaboratoryISO/IEC 17025:2017Accreditation No. 035Schedule of AccreditationItemScopeTypeSiteMeasurand Instrument, GaugeRange[Including margins](Does not include margins)CMC Expressed as an ExpandedUncertainty (95%)Reference Documents לחץ - גדלים פיזיקליים - כיול Calibration - Physical Quantities - Pressure24AP;TPressure,Hydraulic , GaugePressure meters andtransmittersRemarks, לחץ לחץ יחסי הידראולי מדי לחץ משדרי לחץ [0.7 MPa to 35 MPa]1.2 Pa/kPaCalibration Procedure(35 MPa to 70 MPa]1.4 Pa/kPaCI-11Pressure Calibrator Druckbased onEURAMET cg-17OIML R 1012526AAP;TP;TPressure,Pneumatic, AbsolutePressure meters andtransmitters, לחץ לחץ אבסולוטי פניאומטי מדי לחץ משדרי לחץ [5 kPa to 2 MPa]0.7 Pa/kPaCalibration ProcedurePressure Calibrator DruckCI-11(2MPa to 10 MPa]based on1.1 Pa/kPaEURAMET cg-17OIML R 10127AP;T28AP;T29A3031Pressure,Pneumatic, Gauge Pressuremeters and transmitters, לחץ לחץ יחסי פניאומטי מדי לחץ משדרי לחץ [-95 kPa to -20 kPa)0.7 Pa/kPa[-20 kPa to 20 kPa]15 PaP;T(20 kPa to 2 MPa]0.7 Pa/kPaAP;T(2 MPa to 10 MPa]1.1 Pa/kPaAP;T(10 MPa to 15 MPa]1.2 Pa/kPaCalibration ProcedurePressure Calibrator DruckCI-11based onEURAMET cg-17OIML R 101Site: P or T or M , P-Permanent, T-Temporary, M-MobileType of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory'sapproved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.Date of issue17.2.2019Version No. 4Page No.4of:6The certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח

Department:Calibration LaboratoryISO/IEC 17025:2017Accreditation No. 035Schedule of AccreditationItemScopeTypeSiteMeasurand Instrument, GaugeRange[Including margins](Does not include margins)CMC Expressed as an ExpandedUncertainty (95%)Reference Documents טמפרטורה - גדלים פיזיקליים - כיול Calibration - Physical Quantities - Temperature32AP;TTemperature,Temperature indicators forresistance sensorsRemarks, טמפרטורה מדידי טמפרטורה לגששי התנגדות [-200 C to 650 C]0.25 CCalibration ProcedureCI-22Calibration by electricalsimulationbased onASTM E 1137/1137M33AP;TTemperature,Temperature resistance sensors, טמפרטורה מדי טמפרטורה התנגדות [-30 C to 120 C]0.11 CCalibration ProcedureCI-21Comparison to PRT in liquidbathbased onASTM E 1137/1137MSite: P or T or M , P-Permanent, T-Temporary, M-MobileType of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory'sapproved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.Date of issue17.2.2019Version No. 4Page No.5of:6The certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח

Department:Calibration LaboratoryISO/IEC 17025:2017Accreditation No. 035Schedule of AccreditationItemScopeTypeSiteMeasurand Instrument, GaugeRange[Including margins](Does not include margins)CMC Expressed as an ExpandedUncertainty (95%)Reference Documents גדלים מכניים – מדי תאוצה - כיול Calibration - Mechanical Quantities - Accelerometers34AP [ מד תאוצה פייזואלקטרי 5 m/s² to 200 m/s²]Acceleration PiezoelectricType accelerometerCalibration Procedure[5 Hz to 10 Hz]1.6% O.R.CI-10(10 Hz to 3.5 kHz]1.2 % O.R.based onISO 16063-2135APAcceleration Piezoresistive [ מד תאוצה פייזורזיסטיבי 5 m/s² to 200 m/s²]Type accelerometerCalibration Procedure[5Hz to 10 Hz]1.6 % O.R.CI-10(10 Hz to 3.5 kHz]1.2 % O.R.based onISO 16063-2136APVibration TransducerType Velocity TransducerRemarks [ מד מהירות 5 m/s² to 200 m/s²]Calibration Procedure[45 Hz to 3.5 kHz]1.2% O.R.CI-10based onISO 16063-21Back to back calibrationversus standardaccelerometerDUT Sensitivity range0.1 pC/g to 999 pC/gg 9.80655 m/s2DUT mass up to 200 gOR –of readingBack to back calibrationversus standardaccelerometerDUT Sensitivity range0.1 mV/g to 999 mV/gg 9.80655 m/s2DUT mass up to 200 gOR –of readingBack to back calibrationversus standardaccelerometerDUT Sensitivity range0.1 mV/IPS to 999 mV/IPSg 9.80655 m/s2DUT mass up to 200 gOR –of readingSite: P or T or M , P-Permanent, T-Temporary, M-MobileType of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory'sapproved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.Date of issue17.2.2019Version No. 4Page No.6of:6The certificate attached is an integral part of the schedule and is numbered identically התעודה המצורפת לנספח זה מהווה חלק בלתי נפרד ממנו ומספרה זהה למספר הנספח

0.14 % O.R. Calibration Procedure CI-06 ISO 10790 Calibration by means of Coriolis flow and density meter. Department: Calibration Laboratory ISO/IEC 17025:2017 Accreditation No. 035 Schedule of Accreditation Site: P or T or M , P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix .