Transcription
ReadMe for Cisco Unified CommunicationsManager Release 10.5(2)SU7Revision 1Updated April 23, 2018This ReadMe file discusses the following topics: Introduction, page 2 System Requirements, page 2 Version and Description, page 2 New to this Release, page 3 Firmware Upgrade Issues, page 4 Related Documentation, page 4 Before You Begin, page 4 Installation Instructions, page 5 Reverting to a Previous Version, page 6 Caveats, page 6 Obtaining Documentation and Submitting a Service Request, page 33NoteTo view the release notes for previous versions of Cisco Unified Communications Manager, choose theCisco Unified Communications Manager version from the following /ps556/prod release notes list.htmlNotePlease review all sections in this document pertaining to installation before you install this ServiceUpdate (SU). Failure to install this SU as described may result in inconsistent Cisco UnifiedCommunications Manager behavior.Before you install Cisco Unified Communications Manager, Cisco recommends that you review the“New to this Release” section on page 3 for information about issues that may affect your system.Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
IntroductionIntroductionThis 10.5(2)SU7 ReadMe file contains important information about installation procedures and resolvedcaveats for Cisco Unified Communications Manager release 10.5(2)SU7. This SU can be applied to CiscoUnified Communications Manager, Business Edition 6000, Session Management Edition, and Cisco UnityConnection.System RequirementsThe following sections comprise the system requirements for this release.Server SupportIn this release, you cannot install or run Cisco Unified Communications Manager on server hardware;you must run these applications on virtual machines. Please refer to the “Requirements and Limitations”section of the Upgrade and Migration Guide for Cisco Unified Communications Manager and IM andPresence Service, Release 10.5(x). for additional e ip comm/cucm/upgrade/10 5 1/cucm b upgrade-and-migration-guide-105/cucm b upgrade-and-migration-guide-105 chapter 01010.htmlUninterruptible Power SupplyEnsure that you connect each node to an uninterruptible power supply (UPS) to provide backup powerand protect your system.CautionFailure to connect the Cisco Unified Communication Manager nodes to a UPS may result in damage tophysical media and require a new installation of Cisco Unified CM.Version and DescriptionThis SU is a cumulative update that incorporates all of the fixes and changes from Cisco UnifiedCommunications Manager 10.5(2) through 10.5(2)SU6a along with additional changes that are specificto this SU.NoteYou can only install this SU on Cisco Unified Communications Manager Release 8.0(x), 8.5(1x), 8.6(x),9.0(x), 9.1(x), 10.0(1), 10.5(1), 10.5(2), 10.5(2)SU1, 10.5(2)SU2, 10.5(2)SU3x, 10.5(2)SU4x,10.5(2)SU5, 10.5(2)SU6x or any 10.5(2)ES from 10.5.2.11001-1 to 10.5.2.117143-1. Upgrades fromany earlier supported versions require a PCD migration. Upgrades from 6x through 9x need to berequested via PUT (www.cisco.com/upgrade) to obtain the necessary license. This SU should not beinstalled on a Business Edition 3000 server.See the Compatibility Matrix for further lReadMe for Cisco Unified Communications Manager Release 10.5(2)SU72
New to this ReleaseNew to this ReleaseThe following enhancements were introduced in 10.5(2)SU7: TLS 1.2 Support from Cisco Unified JTAPIWith Release 10.5(2)SU7, Cisco Unified JTAPI now supports TLS 1.2 and offers it as asupported protocol while establishing a TLS connection to Cisco Unified CommunicationsManager. So long as TLS 1.2 is configured in Cisco Unified Communications Manager, theconnection to JTAPI will be secured automatically with TLS 1.2.The following enhancements were introduced in 10.5(2)SU6: Mixed Mode requires an Encryption LicenseThis release requires that you have an encryption license installed in order to run Cisco UnifiedCommunications Manager in mixed mode. For additional details about this change, please referto the Upgrades with Mixed Mode Enabled Require an Encryption License chapter of theRelease Notes for Cisco Unified Communications Manager and IM and Presence Service,Release 11.5(1)SU3 at:https://www.cisco.com/c/en/us/td/docs/voice ip comm/cucm/rel notes/11 5 1/SU3/cucm b release-notes-cucm-imp-1151su3.html OpenJDK MigrationFor this release, Cisco has migrated to the Open Java Development Kit (OpenJDK) platformfrom Oracle JDK for Cisco Unified Communications Manager programming and applicationdevelopment.Important NotesSUs do not impact system compatibility unless specifically stated.Cisco provides the following guidance to help you successfully upgrade Cisco Unified CommunicationsManager software: To minimize call-processing interruptions during the upgrade process, register all devices to serversthat are running the same version of Cisco Unified Communications Manager software. Make surethat you register all devices to the backup Cisco Unified Communications Manager server or to theprimary Cisco Unified Communications Manager server, but not to both the backup and primaryservers.ReadMe for Cisco Unified Communications Manager Release 10.5(2)SU73
Firmware Upgrade IssuesWarning for Upgrades to 11.0(1) This SU adds support for future Cisco products. These products are not found in CUCM 11.0(1) asthat version was released prior to development of these products. Upgrades from this SU to any11.0(1) version will display a database migration failure as these new products are not included in11.0(1) Customers migrating from this SU should choose 11.5(1)SU2 or higher as their targetupgrade.Warning for Upgrades to 11.5(1) This SU adds support for future Cisco products. These products are not found in versions of CUCM11.5(1) prior to 11.5(1)SU2 as those versions were released prior to development of these products.Upgrades from this SU to any 11.5(1) version prior to 11.5(1)SU2 will display a database migrationfailure as these new products are not included in releases of 11.5(1) prior to 11.5(1)SU2. Customersmigrating from this SU should choose 11.5(1)SU2 or higher as their target upgrade.Firmware Upgrade IssuesFor all SCCP and SIP firmware upgrades from firmware release versions earlier than 8.3(3) to version8.5(2)SR1 or greater, you must first upgrade your firmware to version 8.5(2). Once you have upgradedto version 8.5(2), you can upgrade your IP Phone to version 8.5(2)SR1 or later. Refer to the FirmwareVersions in this Release section of this document to determine the firmware load provided in this SU.For additional details, Firmware Upgrade Instructions, and Firmware Download locations please see:SCCPhttp://www.cisco.com/en/US/docs/voice ip comm/cuipph/firmware/8 5 http://www.cisco.com/en/US/docs/voice ip comm/cuipph/firmware/8 5 lated DocumentationTo view documentation that supports Cisco Unified CM Release 10.5(x), go to:http://www.cisco.com/c/en/us/td/docs/voice ip comm/cucm/docguide/10 5 2/CUCM BK D6D433CE00 CUCM-documentation-guide-1052.htmlBefore You BeginBefore you upgrade the software version of Cisco Unified Communications Manager, verify yourcurrent software version.To do that, open Cisco Unified Communications Manager Administration. The following informationdisplays: Cisco Unified Communications Manager Administration System versionReadMe for Cisco Unified Communications Manager Release 10.5(2)SU74
Installation InstructionsInstallation InstructionsNoteApply this SU to all of your Cisco Unified Communications Manager servers, beginning with thepublisher server and TFTP server.Refer to the Upgrade and Migration Guide for Cisco Unified Communications Manager and IM andPresence Service, Release 10.5(x) for detailed information about doing this e ip comm/cucm/upgrade/10 5 1/cucm b upgrade-and-migration-guide-105.htmlNoteBecause the 10.5.2.17900-13 build is a non-bootable ISO, it proves useful only for upgrades. You cannot useit for new installations. You may however install with the base version 10.5.2.10000-5 and apply10.5.2.17900-13 as a patch during the installation.Release 10.5(2) is available in both restricted (which is the release type that has always been available fromCisco) and unrestricted versions of software to comply with import / export restrictions to various countries. The unrestricted version is available in limited markets. Please refer to the “Export Unrestricted” section in the Upgrade Planning chapter, of the Uprade Guide for Cisco Unified Communications Manager,Release 10.0(1) referenced above for a more detailed description.CautionFor both restricted and unrestricted upgrades from an 8.5(x) or earlier release to a 10.5(x) release, a patch(COP file) must be applied prior to initiating the upgrade. Before you upgrade from compatible versionsof Unified CUCM, install the COP file named ciscocm.refresh upgrade v1.5.cop.sgn. Please refer to the“Refresh Upgrades” section in the Upgrade overview chapter at the Uprade Guide for Cisco UnifiedCommunications Manager, Release 10.0(1) referenced earlier in this document for detailed installationinstructions and download location.The file names and hash values you will use for this upgrade are: UCSInstall UCOS 10.5.2.17900-13.sgn.isoThe MD5 for the Restricted combined download is: 9bcf1c7dad9fa4cef70a0f85bd6ab782The SHA-512 for the Restricted combined download 01694fdd6e41901d517b6f4b1dfb305NoteOnce installed, UNRST releases can never be converted or upgraded to releases which support fullencryption capabilitiesFor the Unrestricted version: UCSInstall UCOS UNRST 10.5.2.17900-13.sgn.isoThe MD5 for the Unrestricted combined download is: 69a572ac15842b74a886efd210ad22a5The SHA-512 for the Unestricted combined download d97fc75cd5ae8754d27e6dbcf2c912fReadMe for Cisco Unified Communications Manager Release 10.5(2)SU75
Reverting to a Previous VersionReverting to a Previous VersionNoteRevert the SU on all servers in the cluster in the same order in which you performed the installation.Refer to the “Switch to previous version” section in the Upgrade Tasks chapter at Uprade Guide forCisco Unified Communications Manager, Release 10.0(1) for detailed instructions on “Reverting to aPrevious ice ip comm/cucm/upgrade/10 0 1/CUCM BK U4214F9D00 upgrade-guide-cucm-100/CUCM BK U4214F9D 00 upgrade-guide-cucm-100 chapter 0100.html#CUCM TP RD8DD800 00CaveatsCaveats describe unexpected behavior on a Cisco Unified Communications server. The followingsections contain lists and descriptions of resolved and open caveats in this release.Resolved CaveatsResolved Caveats for Cisco Unified Communications Manager Release 10.5(2)SU7 describes possibleunexpected behaviors in previous Cisco Unified Communications Manager Release 10.5(2) releases.Resolved Caveats for Cisco Unified Communications Manager Release 10.5(2)SU7The following information comprises unexpected behavior that is addressed by this SU of Cisco UnifiedCommunications Manager.Resolved CUCM Caveats in 10.5(2)SU7CSCvh55176 : After reboot Server is not booting back console stuck with "Probing EDD (edd offCSCvh81363 : upgrade space calculation scripts are faulty.CSCvd67978 : Update logic for urlencoding to comply with CVE 2016 6816 in Tomcat 7.0.73 and lCSCvf02335 : BAT Unable to update Cisco Support field for PhonesCSCvf63462 : CUCM Fails To Get SSO StatusCSCvf69935 : getUser fails when end user has many controlled devicesCSCvf73537 : Call Manager sending unescaped # causing MRA Phones to UnregisterCSCvg56395 : Calls not presented to the phones in a line groupCSCvg75502 : MIB2 service is not in running state post upgradeCSCvg81698 : On CCM UI the Spark room kit registration status shows as NoneCSCvg94144 : DBL out of shared virtual memory when running BPS jobsCSCvh05469 : Domain name with multiple dots is not allowing to add the entryCSCvh83796 : CUCM Core when race condition hit during transfer operationCSCvh67638 : DST/TZ data upgrade with 2018cCSCuz05306 : MTPAIF receives farEnd RO/inactive answer doesn't check for peer capsCSCva31765 : UCM Memory Leak With SCCP and Annunciator When Phone Does Not Send OpeCSCvi12584 : SIP Trunk duration. Mismatch between Time In Full Service and Time Up/Down couReadMe for Cisco Unified Communications Manager Release 10.5(2)SU76
CaveatsCSCvf47039 : Password can be seen in plain text in log files when UI password is changed usingCSCvb48173 : SOAP Services keeps on rebootingCSCtj47847 : Thread synchronization issues in QBEHelper results in CEF coreCSCvf57448 : Unable to configure ILS if remote clusters are previously configured in ClusterCSCvg43550 : ARC application reporting OOS events for Cisco IP phone extentions; phones needCSCvg75966 : Thread synchronization issues in QBEHelper results in CEF coreCSCvh13881 : Recording fails intermittently once conference startsCSCvh92403 : TLS1.2 Support for JTAPI 10.5.2CSCvd24256 : Delay in registering routePoints in secure modeCSCvf63806 : After PCD Migration Incorrect File permissions impacts SFTP operationsCSCvh48571 : Failed to save device/cucm/RemoteDestination. Error, code 1CSCvf08417 : BIB Recording failed due to Software Based MTP OutOfResourceCSCvf71339 : IPVMS should preserve tx and rx for one way mediaCSCvg06692 : After PCD Migration Incorrect File permissions impacts trace collection, CDP andCSCvh17818 : Incorrect File Permissions for Prefs.xml File Following PCD MigrationCSCvh20757 : Incorrect File Permissions for Ipsec.xml File Following PCD MigrationCSCvh55509 : 8821 - Add default English US dictionary into CUCM for IP Phone 8821 for SR6CSCvf84642 : CUCM affected by Apache Tomcat vulnerabilitiesCSCvg74810 : Cisco Unified Communications Manager SQL Injection VulnerabilityCSCvd72245 : Evaluation of ciscocm for NTP March 2017CSCvh61049 : ISC BIND Remote Denial of Service VulnerabilityCSCvh62145 : CLI - utils create report platform should not download platformConfig.xmlCSCvh82993 : 10.5(2)su7 upgrade rules to prevent install over ineligible ES'sResolved Cisco Unity Connection Caveats in 10.5(2)SU7CSCvi33593 : Upgrade openJDK to 1.7.0 161CSCvh65775 : Unable to remove Connection location from the Digital NetworkingCSCvf80297 : UnityConnection Update Database Statistics task needs additional error handlingCSCvg21147 : Subject line "from" is missing from messages taken by Call/Interview Handlers afCSCvg82812 : CUC - "com.cisco.unity.networking.NetworkRemover" Alert on subscriber nodeResolved CUCM Caveats in 10.5(2.17143-1); base ES for 10.5(2)SU7CSCvf53884 : TVS thread handling re-architectureCSCuu57031 : sensitive info seen in URLCSCvh55099 : 11.0(3)SR6 SIP loads for 8821 WLAN IP PhonesCSCvh17135 : Gateway has been blocked and redirecting to the security.jspCSCvd54314 : CUCM does not properly handle SIP Update w/SDP and 183 W/SDP glareCSCvc12634 : SDP Contains m audio 4000 Instead of MTP Port Response Value during RedirectCSCvd08950 : DTMF not working after Transfer and Multicast MOH is presentCSCvb73070 : Call transfer across SME is failing for IP phone usersCSCvg87841 : 12.0(1) QED for Cisco ATA 191 deviceCSCvg87838 : 12.0(1) SIP load for Cisco ATA 191 deviceCSCvg38675 : CCM Cores in mutex lock OperationCSCvf02916 : IX5000 Telepresence endpoint - add enable for proximity from client appsCSCvg51264 : Cisco Unified Communications Manager Cross Site Scripting VulnerabilityCSCvg57582 : Unable to enable IGMP protocol for Rebroadcast External Multicast Source featureReadMe for Cisco Unified Communications Manager Release 10.5(2)SU77
CaveatsCSCvf56538 : CTI monitoring DevName must be upper caseCSCvg22923 : CUCM unauthorized access vulnerabilityCSCvf79346 : Cisco Unified Communications Manager Cross Site Scripting VulnerabilityCSCvg45484 : Check in firmware release 12-0-1SR1 for phone models 88xx/8845 65CSCvg29297 : Add device enablers for Cisco Spark Room 70 Dual and Cisco Spark Room 70 SinCSCva47682 : utils itl reset localkey with errorError in obtaining ITL fileCSCvf82688 : Export control functionality missing in license usage reportCSCvf36322 : CUCMOS Updates for Sudo, GlibC, Libtiff, Coreutils, GnuTLS, OpenSSH, BashCSCvf36286 : CUCMOS Updates for Bind, NSS, MySQL, JasperCSCve08600 : ISR4331 T1CAS - Product Specific Configuration Layout MissingCSCvd87648 : OpenJdk 1.7 32 bit Upgrade for ccmCSCvg10268 : Normalization Scrip to pass through header "x-att-loop" sent by AT&TCSCvf24628 : Error message thrown immediately after install of PLMCSCve13796 : Cisco Unified Communications Manager Directory Traversal VulnerabilityCSCvc21620 : Data Retrieval Via Search ManipulationCSCvc51278 : DirSync high CPU after LDAP search base is deletedCSCuv49817 : End User CAPF profile can be inserted via BAT on Unrestricted UCMCSCvc94740 : Evaluation of ciscocm for OpenSSL Jan 2017CSCvb86795 : Proxy TFTP Service Crashes after Network OutageCSCuy08778 : TFTP Cores When Large Number of Phones Attempt to RegisterCSCvc03554 : TFTP persistently depletes Max Serving Count under Delay between Client & TFTCSCvc62489 : WarningNo backup device is configured on Publisher after PCD MigrationCSCvf36682 : Cisco Unified Communications Manager SQL Injection VulnerabilityCSCvf94485 : phone firmware for 7832 12.0.1 releaseCSCvf94416 : Phone firmware for 8832/8832NR 12.0.1 releaseCSCvf89436 : 11.0(3)SR4 QED files for 8821 WLAN IP phonesCSCvf88162 : 11.0(3)SR4 SIP loads for 8821 WLAN IP PhonesCSCvf28386 : UCM Configuration files for 7832 12.0.1 releaseCSCvf28360 : UCM Configuration files for 8832/8832NR 12.0.1 releaseCSCvd18917 : CUCM sending UPDATE after 180 RingingCSCvc83712 : Cisco Unified Communications Manager Cross Site Scripting VulnerabilityCSCvc35120 : Platform dependent QED change for adding new Service Modules to ISR4kCSCvc21306 : Syslog Messages are having incorrect time format.CSCvb61698 : CUCM arbitrary file write in Cisco Unified ReportingCSCvf87066 : Check in firmware release 12-0-1-11 for phone models 78xx/88xx/8845 65CSCvf69143 : incoming calls from MGCP gateway do not match the most specific patternCSCvf51739 : Wallpaper files replacement for 88xx phonesCSCvf39052 : CTI messages carry \ escape character when the hunt pilot member is configured aCSCve67923 : Add configuration item "Customer Support Use" for 7800 series phoneCSCve67807 : Add configuration item "Customer Support Use" for 8800 series phoneCSCve48879 : 88xx phone can show Latin font when configure default EN-US localeCSCvd77762 : QED checkin for CP-8800-A-KEM and CP-8800-V-KEMCSCuz58167 : " " is missed by cucm when dial from personal access book on 78xx/88xxCSCuw56115 : Issue accesing personal address book serviceCSCvc66562 : SCCP TCP handle in use by multiple devicesCSCvf16362 : Out of Virtual Shared Memory during BAT export of line groups.CSCve27331 : Cisco Unified Communications Manager Horizontal Privilege EscalationCSCvd12396 : Phone disconnects call while call is either put on hold or being redirected, leaReadMe for Cisco Unified Communications Manager Release 10.5(2)SU78
CaveatsCSCvc23572 : Evaluation of ciscocm for NTP November 2016CSCve45417 : CCM core due to no response from SIP endpoint to action restart NOTIFYCSCvd91688 : IM&P Performance BAD HTTP REQUEST issue with oauth login & Decrypt ErrorCSCuz55210 : CCM Core due to no response from SIP end point.CSCve13786 : Cisco Unified Communications Manager SQL Injection VulnerabilityCSCuu61288 : selinux blocking the logging in of remote accountCSCus51633 : Calling party pi not applied when "Caller ID For Calls From This Phone"CSCve16870 : Add device enablers for Cisco Spark Room Kit 55CSCvb32513 : PCD Migration will regenerate certificates when migrating to 10.5.2SU3 or 11.xCSCuz18994 : CTI Manager restart is needed after CallManager cert regenerationCSCve64910 : BAT Export of Regions is failing with "cannot open database" errorCSCve08528 : Service param "LRG for redirected calls" is overridden for redirected call whenCSCvd13175 : CUCM core sipSPISendByeCSCuo31473 : We get a error msg when we Maximize the CDR CMR DUMP window in ChromeCSCvc91499 : UnSol notify DTMF failure after hold-resumeCSCvc46039 : Error parsing XML for 88XX phonesCSCvb28438 : CCM Core - New mobile registration ip;port does not remove prior oneCSCve46567 : Min TLS Support for RTMT(Backward Compatibility)CSCvd52056 : Call Drop when Call Pickup is pressed on 2 phones simultaneouslyCSCvc01007 : Unable to select BRI Protocol in 4431 routerCSCve33543 : No TerminalConnections in a Connection after call is forwarded to same DN with dCSCvd61606 : CPU Spiking Due To Certificate Change Notification ServiceCSCvd45794 : Verint Start Recording/hold/resume/Start Recording causes audio cap 0. Call faiCSCuv93731 : Multiple Codec Negotiation Causes Call to failCSCvd42948 : DST/TZ data upgrade with 2017bCSCvd56342 : Block upgrades to CUCM 11.0(1) and 11.5(1) releases prior to 11.5(1)su2CSCvb98055 : QED changes for adding new service moduleCSCve08143 : TFTP Service crash in SME in 10.5CSCuo05704 : Could not resolve user name with special characters.CSCvc65519 : CUCMUnable to Transfer Call From UCCX Finesse ApplicationCSCvd78861 : Issue with vendorConfigHelp for Fallback feature configuration and EMCC featureCSCvd53768 : Access to the requested resource has been denied seen in a scenarioCSCvc79347 : UCMSudo Arbitrary Command Execution VulnerabilityCSCvc79337 : UCMLibgcrypt PRNG VulnerabilityCSCvc74291 : Cisco Unified Communications Manager SQL Injection VulnerabilityCSCvc30999 : CUCMReflected XSS is possible on vendorConfigHelp.do pageCSCvc21945 : CUCMNSS and NSS-Util VulnerabilitiesCSCvc20679 : HTTP GET method is allowed in login requestCSCvc12386 : Password stored in plain textCSCvc06608 : Cisco Unified Communications Manager Cross Site Scripting VulnerabilityCSCvb70033 : XSS, firewall bypass, and DoS via /ucmuser/serviceProfile proxy functionalityCSCvd67687 : IPMA service gets unstable after some timeCSCvd51937 : Recording failure due to wrong NodeID provided to CTI when transfer between nodCSCvc90657 : CTI connection dropped due to junk value in CtiLineGetForwardInfoRes to GenesyCSCvc80169 : Upgrade JDK for January 2017 Critical Patch UpdatesCSCvc74573 : CUCM OVAs do not install with ESXi 6.5CSCvb67807 : VMware Tools 10.0 update fails due to SELinux denialsCSCvb03393 : CUCM backup looping, completed three time in an hourReadMe for Cisco Unified Communications Manager Release 10.5(2)SU79
CaveatsCSCva24658 : not able to upload 2 intermidiate certs without CN in DNCSCvd42284 : ServerDown alert does not work for different network segment nodesCSCvc99698 : BAT update doesn't work for "secureserviceurl" for device profilesCSCvc83768 : Missing ipsec trust store on node-2 during 11.5 fresh installCSCvc79350 : UCMVIM Privilege Escalation VulnerabilityCSCvc49348 : Cross-Site Scripting - Non-PersistentCSCvc37554 : Secure Calls with Video Enabled Not Showing The Lock Icon with unsecure audioCSCvc25859 : CURT broken on Fresh Installation and UpgradeCSCvb97237 : CUCMDo Not Echo Malicious Characters in Banner Acknowledgement FormCSCvb61689 : CUCM arbitrary XML file reads in Cisco Unified ReportingCSCus68268 : Certificate verificatin failed while establishing secure connectionCSCvc86757 : No response for SUBSCRIBE and a retry to the next destination in the list on truCSCvd63310 : Error while installing the DST file on the CUCM that already has previous DST COCSCvd56512 : 8821Include 8821 IP-Phone loads version 11.0(3)SR1 into the CUCM DevPacksCSCvd39551 : Media send Term Capabilities Set with 0 caps, instead of allocating xcoder and sCSCvd34176 : Webdialer setting for 'Do not display call confirmation dialog' does not apply uCSCvd56923 : One file is corrupted in the cmterm-69xx-SCCP.9-4-1-3SR3.k3.copCSCvd54375 : Commit 11.7(1) IP Phone FW in CUCM DBCSCvd22846 : Fixup consistency of model number in rules fileCSCvd22836 : Add support for provisioning auto wake up detection setting on DX/SX/MX and CisCSCvd22818 : Add device enablers for Cisco Spark Room Kit and Cisco Spark Room Kit PlusCSCvd01097 : CUCM is not sending the 200 ok to a re-invite, so the call is disconnected withCSCvb85328 : CUCM IPVMS MTP incorreclty detects tone when marker bit is not setCSCvd35756 : Update the image 9.4(2)SR3 for 7900 seriesCSCvc83631 : High CPU utilization because of LBM ServiceCSCvc80950 : SIP stack does not respond to 200 OK without SDPCSCvc07334 : Calls are hung after 503 service unavailable is seen as normal call clearingCSCuu79357 : PMR 40305 - AXL authenticate fails due to database long transactionCSCvc10862 : CUCM fails to pass DTMF digits via SIP notify after call connectsCSCuw84283 : Un-necessary ipaddress change detection in inter-cluster callCSCus20387 : CUCM responding to SIP 200 message with different CSEQ numberCSCvb86555 : Blind Conferences with recording, JTAPI handling CallConferenceChangedEventCSCus44723 : IP Addr Mode for a device with no Common Device ConfigCSCvd16496 : "Mobility" softkey should work for line2 on the phone as well. (Part 2)CSCvc92264 : RemoteDestinationProfile is set for this destination so not Forwarding the callCSCvc70110 : MTP Resource leak during SDLLinkOOS stateCSCvc15253 : Increase in hash limit for Multicast Source Port NumberCSCva03814 : SELinux blocks switch back to old partition after RU failureCSCvb59936 : MTP leak caused by inactive 200 OK for a INVITE to connect sip-323 after redirecCSCvc61500 : 9.4(1)SR3 SCCP/SIP firmware files for 6921/41/61/45 IP PhonesCSCvb48691 : Evaluation of ciscocm for Openssl September 2016CSCuz71983 : Server Time Displayed in UTC Format in several pagesCSCur53532 : "Mobility" softkey should work for line2 on the phone as well.CSCvc42728 : CUCM Upgrade failed from 10.5(2) to 11.0(1x)CSCvb99066 : IPMA stops routing calls after some timeCSCvb89860 : CUCMBind DoS VulnerabilitiesCSCvb37121 : Insufficient XSS protection in ccmivr pageCSCuy67794 : CLI command 'utils update dst' does not update databaseReadMe for Cisco Unified Communications Manager Release 10.5(2)SU710
CaveatsCSCvc10807 : InstallWizard uses unsafe temporary file for password encryptionCSCuu88269 : SelfcareMissing icon for 8865 and 8845 phonesCSCvc40853 : CUCM - SNMP Master agent service cored twice at random timesCSCvc37627 : Call recording failures on transferred calls, while updating BIB enabled valueCSCvc26581 : Fix up mistake in description fields on DX80 and DX70 default value on DX80CSCvc22501 : Unable to access Enterprise Parameter and Service Parameter pagesCSCvc11159 : Exceptions During LDAP Sync Result in Inactive UsersCSCvc21883 : Call to user with CTIRD not routing to RD due to "stale" call on CTIRDCSCvb64641 : CUCMReflected XSS attack is possible on ccmadmin pageCSCvb92459 : Webdialer setting is not saved sometimesCSCvb02508 : DST/TZ data upgrade with 2016g & Leap Second updateCSCuu06649 : SIP Message. Subscription-State. Expires contains a negative value.CSCvc05878 : CUCM10.5.2 Personal Directory values are garbled after the loginCSCvb95805 : CUCM LDAP Directory Sync - Improve Error Reporting When Sync CompletedCSCvc08992 : CUCM IPMA shows error "Unable to update. Please contact System Administrator"CSCva13076 : Recording Tone is always played for Extend and Connect RD phonesCSCuz91655 : Exception while performing sync using secure port in LDAP directory pageCSCus91721 : No audio on call through SIP trunk to CUBE due to MTP hangingCSCvc05651 : 8821Include 8821 IP-Phone loads version 11.0(2)SR2 into the CUCM DevPaksCSCvb97582 : Product specific config changes for CE8.3 releaseCSCvb93599 : Phone firmware for 78xx/88xx 11.5.1SR1 releaseCSCva69297 : call leak happens over shared line MRA jabber clients.CSCux74884 : Platform CLI file get command ssh client Ciphers needs to be updatedCSCvb57716 : CUCM 10.5.2 Unable to update primary extension of end user via AXLCSCvb97805 : CUCM 10.5(2)SU4 ILS Authentication configuration options are missingCSCvb82789 : CTI reports device to be OutOfService although it is registered for EM controlleCSCvb39142 : SparkRD should support end to end dtmfCSCvb23366 : One way audio in redirected call over EO with DTMF mismatchCSCvb22671 : Timer based stale Directed Call Park instance clean up in case any errorCSCva82068 : locale changes on Self-care portal are not automatically pushed to phoneCSCva58795 : Blind Xfer w/Early Media Uses an MTP UnnecessarilyCSCva04753 : dtmf test failing in few EO-EO scenarios of F4125 SIP DTMF Suite in 11.5CSCuz79366 : SNMP port 161 was not added to iptable rulesCSCuz68432 : SIP MXTimeout due to MediaExchange stuck in waitInterfacesCapabilitiesCSCuv07653 : F3388 - Call Preservation Duration ManagementCSCut78334 : Unable to get list of Backups from Restore pageCSCus78120 : TAR file not getting listed after Pub is rebuilt in UCM IMP ClusterCSCus28201 : MA fails to respond in rebuilt cluster when Sub is not up/not installed.CSCuz72455 : Cisco Unified Communications Manager Denial of Service VulnerabilityCSCut30685 : Increase swap space on VOS based productsCSCva88701 : Evaluation of ciscocm for TCP August 2016CSCvb65237 : CUCM L2 Upgrade to 10.5.2 SU4 Fails At Licensing ComponentCSCvb22603 : Record-route header corrupted, ccm cores while deleting memoryCSCva74508 : BAT export TURN (ICE) Password in clear textCSCva63426 : Call forward fails through secure MGCP GW with non-secure phone profileCSCva55016 : Upgrade JDK for July 2016 Critical Patch UpdatesCSCuz11051 : Spark Licensing
6 ReadMe for Cisco Unified Communications Manager Release 10.5(2)SU7 Reverting to a Previous Version Reverting to a Previous Version Note Revert the SU on all servers in the cluster in the same order in which you performed the installation. Refer to the "Switch to previous version" section in the Upgrade Tasks chapter at Uprade Guide for Cisco Unified Communications Manager, Release 10.0(1 .
