Transcription
VFC-6000 LCDORDERING INFORMATIONTemperature Data Logger with LCDVFC5000 TPFEATURESStandard Data LoggerVFC 5000 TPReplacement BatteryBAT 3V6 ½AA(Data Logger, 1m ThermistorProbe, Software on CD andBattery) -35 to 80 C (-31 to 176 F)measurementrange LoggerTemperatureProbeData USB interface for set-up and data download User-programmablealarm USBthresholdsInterfacewith optionalwithLCD andLED indicator delay(1 Required) Delayed Alarm Settings: - select number of consecutivereadings in an alarm condition before it is indicated bythe LED’s.FEATURES Status indication via red, green and orange LEDs High contrast LCD, with two and a half digit temperature -40displayto 125 C(-40 to 257 F) probe measurement rangefunction HighcontrastLCDwithandtemperaturedisplayImmediate, delayedpush-to-startlogging USBinterfaceforset-upanddatadownloadSupplied with replaceable internal lithium battery and User-programmablealarm thresholdsWindows control software Push button reset of Min/Max readingsstandalonedatameasuresand stores up to 16,378 temperature readings over a -35 to 80 C (-31 to 176 F) range. The user ThisStatusindicationvialoggerred andgreen LEDscaneasilysetuptheloggingrateandstart-time, Immediate, delayed and push-to-start logging and download the stored data by plugging the data logger into a PC’s USB port and runningpurposedesignedunder WindowsXP, Vista, and 7. Data can then be graphed, printed and exported to other applications. theSuppliedwith10 foot,softwarehigh accuracysensor probehighcontrastcan showa varietyof antemperatureAt the touch of a button, the user can cycle between the current, TheProbelengthcanLCDbe m and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically allow Supplied complete with replaceable lithium battery andWindows control software 2 PT (freezer & fridge) NIST Certification of Calibration,ISO 17025.2005 compliantMinimumTypicalMaximumUnitThisstandalone rangedata logger measures and stores up to 32,510 temperatureprobe which is attachedMeasurement-35 (-31)readings from the supplied thermistor 80 ( 176) C ( F)viaInternalthe socketat the base of the unit. The user can easily set up the logging rate and start-time,and download the stored data by pluggingresolution0.5 (1) C ( F)theAccuracydata loggerintoerror)a PC’s USB port and running the purpose designed software under WindowsXP, Vista, 7 or 1.58. Datagraphed,(overall 0.5 ( 1)( 3) can then be C( F)printedandexported to other applications.LoggingrateOperating temperature rangeevery 10severy 12hr--35 (-31) 80 ( 176) C ( F)1*YearThe VFC 5000 TP features an LCD and push-button which allows the user to cycle through the most recent, highest and lowest stored1/2AA 3.6V Lithium Battery lifetemperature readings. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 6* At 25 C and 1 minute logging ratemonths.EL-WIN-USB (CONTROL ntrolSolution’s EasyLog USB control software is suppliedfree of charge with eachdata logger. Easyto install and use, the controlsoftwareWindowsrangeXP, Vista & 7. The software-40is ) to set-up the data logger as well as 125( 257)graph and export C ( F)data to Excel.Operating temperature range *-10 ( 14) 40 ( 104) C ( F)Display resolution0.5 (0.5) C ( F) LoggingLoggerresolutionname0.1 (0.1) C ( F) Accuracy C, F (logger error) LoggingLoggingraterate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) 1/2AAHigh andalarmswith Lifeoptional LED indicator delay3.6VlowLithiumBattery 0.25 ( 0.4)every 1 s C ( F)every 12 hr6** Immediate, delayed and push-to-start loggingMonth* Operating temperature applies to the data logger unit only. Display off, on for 30 seconds after button press, or permanently on** Depending on sample rate, ambient temperature and use of LCD. Data rollover (allows unlimited logging periods by overwriting the oldestdata when the memory is full)The latest version of the control software may be downloaded free of charge from l Solutions, Inc. 35851 Industrial Way, Suite D, St. Helens, OR 97051888 311-0636888-311-0636AppliesAppliesto VFC-6000LCD TPto VFC 5000PagePage1 of 41 of 5
VFC-6000 LCDTemperatureData Logger with LCDVFC 5000 TPTemperature Probe Data Logger with LCD and USB InterfaceFEATURES -35 to 80 C (-31 to 176 F) measurement range USB interface for set-up and data download User-programmable alarm thresholds with optionalLED indicator delayWINDOWSCONTROL SOFTWARE Delayed Alarm Settings: - select number of consecutiveVfcdataloggers’sUSB controlsoftwareis suppliedfree ofbycharge with each data logger. Easy to install and use, the control software runsreadings in an alarmconditionbeforeit is indicatedunderWindows XP, Vista, 7 or 8. The software is used to set-up the data logger as well as download, graph and export data to Excel.the LED’s. Status indication via red, green and orange LEDsThe software allows the following parameters to be configured: High contrast LCD, with two and a half digit temperature displayLoggerfunctionname C, F Immediate,delayed and push-to-start loggingLogging withrate (1s,10s, 30s,internal1m, 5m,lithium30m, 1hr,6hr, and12hr) Suppliedreplaceablebattery WindowsHigh andcontrollow alarmssoftware Immediate, delayed and push-to-start loggingThis standalone data logger measures and stores up to 16,378 temperature readings over a -35 to 80 C (-31 to 176 F) range. The user Display off, on for 30 seconds after button press, orcan easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and runningpermanently onthe purpose designed software under Windows XP, Vista, and 7. Data can then be graphed, printed and exported to other applications. Data rollover (Allows unlimited logging periods byThe high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current,overwriting the oldest data when the memory is full)maximum and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically allowThe latest version of the control software may be downloaded free of charge from www.vfcdataloggers.comMinimumMeasurement rangeTypical-35 (-31)Internal resolutionMaximumUnit 80 ( 176) C ( F)0.5 (1)Accuracy (overall error)Logging rateDISPLAY AND STATUS FUNCTIONSOperating temperature range C ( F) 1.5 ( 3) C ( F)every 10s 0.5 ( 1)every 12hr--35 (-31) 80 ( 176) C ( F)Temperature scale symbols1/2AA3.6V5000Lithiumlifea high contrast LCD and two LEDs. The LCD showsThe VFCTPBatteryfeatures1*Yearlogged* At25 C temperatureand 1 minute valuesloggingusingrate seven segment numbers, along with symbols.The LCD can also show information regarding the logging status - see LCDINDICATION below.EL-WIN-USB(CONTROL SOFTWARE)Control Solution’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the controlThree different functions are available on the display – most recent loggedsoftware runs under Windows XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and exporttemperature, maximum logged temperature and minimum logged temperature.data to Excel.ReadingMaximum/MinimumThe push button is used to cycle through the functions and reset Minimum/logged value symbolMaximum readings. In addition, logging and alarm status are shown using twohigh intensity Loggername LEDs. C, F Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) High and low alarms with optional LED indicator delay Immediate, delayed and push-to-start logging Display off, on for 30 seconds after button press, or permanently on Data rollover (allows unlimited logging periods by overwriting the oldestdata when the memory is full)The latest version of the control software may be downloaded free of charge from l Solutions, Inc. 35851 Industrial Way, Suite D, St. Helens, OR 97051888 311-0636888-311-0636Appliesto VFC 5000Appliesto VFC-6000LCD TPPagePage1 of2 4of 5
VFC-6000 LCDTemperatureVFC5000 TPData Logger with LCDTemperatureProbe Data Logger with LCD and USB InterfaceFEATURES -35 to 80 C (-31 to 176 F) measurement range USB interface for set-up and data downloadLCDINDICATION User-programmable alarm thresholds with optionalLED indicator delayLogger Status Delayed Alarm Settings: - Displayselect number of consecutivereadings in an alarm condition before it is indicated byDelayed Startthe LED’s.ExplanationThis is shown when the logger is set tostart at a specific data and time* Status indication via red, green and orange LEDs High contrast LCD, with two and a half digit temperaturePush to Startdisplay function Immediate, delayed and push-to-start logging Supplied with replaceable internal lithium battery andWindows control softwareLoggingThis standalone data logger measures and stores upcan easily set up the logging rate and start-time, andThis is shown when the logger is setupfor “Push to start” loggingThis is shown when the logger is runningin “LCD off” mode, and the button isto 16,378 temperature readingsa -35 to 80 Cpressed.overThe displayclearsagain(-31afterto 176 F) range. The userthreesecondsthe data logger into a PC’s USB port and runningdownload the stored data bypluggingthe purpose designed software under Windows XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.StoppedIf the logger has not been set to log andThe high contrast LCD can show a variety of temperature information. At the toucha button,the threeuser dashescan cyclethe ofbuttonis pressed,are between the current,displayedthree secondsmaximum and minimum stored temperatures. The data logger is supplied completewithfora long-lifelithium battery, which can typically allowProbe has been disconnectedMinimumMeasurement range-35 (-31)The flashing message ‘Prob’, followedby a number, or letter, will be displayedif the logger is logging and the probeTypical The numberMaximumbecomes disconnected.confirms the type of probe that should 80 ( 176)be connectedInternal resolution C ( F)0.5 (1)Accuracy (overall error)Logging rateUnit C ( F) 0.5 ( 1) 1.5 ( 3)* If the logger is set to “LCD off” or “LCD on for 30 seconds” mode, then this will only be shown after the button isevery 10severypressed. Otherwise the display will remain blank.Operating temperature range-35 (-31) C ( F)-12hr 80 ( 176) C ( F)1*Year1/2AA 3.6V Lithium Battery life* At 25 C and 1 minute logging rateEL-WIN-USB (CONTROL SOFTWARE)Control Solution’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the controlsoftware runs under Windows XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and exportdata to Excel. Logger name C, F Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) High and low alarms with optional LED indicator delay Immediate, delayed and push-to-start logging Display off, on for 30 seconds after button press, or permanently on Data rollover (allows unlimited logging periods by overwriting the oldestdata when the memory is full)The latest version of the control software may be downloaded free of charge from l Solutions, Inc. 35851 Industrial Way, Suite D, St. Helens, OR 97051888 311-0636888-311-0636Appliesto VFC 5000Appliesto VFC-6000LCD TPPagePage1 of 34 of 5
VFC-6000 LCDTemperatureData Logger with LCDVFC 5000 TPTemperature Probe Data Logger with LCD and USB InterfaceFEATURES -35 to 80 C (-31 to 176 F) measurement rangeFLASHINGMODES LEDUSB interfacefor set-upand data download User-programmablethresholdswith optionalVFC 5000 TP featuresalarmtwo LEDsthat indicatethe logging, battery and alarm status:LED indicator delay DelayedSettings:selectnumberof consecutiveThe firstAlarmLED flashesred- toindicatethat theVFC 5000 TP is in an alarm condition. It will flash when the logged temperature hasreadings in an alarm condition before it is indicated byexceeded a Low or High alarm level.the LED’s. The second LED flashes green to indicate that the VFC 5000 TP is not in an alarm condition. Status indication via red, green and orange LEDs HoldHigh iscontrastwith twoandforcesa halfthedigittemperatureenabledLCD,by default,whichloggerto continue flashing the red LED after an alarm, even when the temperature hasdisplay functionreturnedto normal. This feature ensures that the user is notified that an alarm level has been exceeded, without the need to download theImmediate,and push-to-start loggingdata fromdelayedthe logger. Supplied with replaceable internal lithium battery andWindowscontrolHoldcan beturnedsoftwareoff via the control software. The red LED will then only flash whilst the logger is in an alarm condition. When thetemperatureto normal,the greenLED willThisstandalonereturnsdata loggermeasuresand storesupflash.to 16,378 temperature readings over a -35 to 80 C (-31 to 176 F) range. The usercan easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and runningLED modesare explainedbelow: XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.theAdditionalpurpose designedsoftwareunder WindowsThe high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current,maximum and minimum stored temperatures.The data logger is supplied complete with a long-life lithium battery, which can typically allowGreen single flash (10 seconds)The data logger is currently logging. No alarm.Green single flash (20 seconds)The data logger is currently logging.No alarm. However,Typicalthe battery is low andMaximumshould be replaced beforeMinimumlogging important data.Measurement rangeInternal resolutionAccuracy (overall error)Logging rateOperating temperature range1/2AA 3.6V Lithium Battery life* At 25 C and 1 minute logging rate-35 (-31) 80 ( 176) C ( F)Green single flash (30 seconds)0.5 (1)The data logger is not currently logging, but is primed to start at a later date and time (delayed start). 0.5 ( 1)Green double flash (20 seconds)every 10sThe data logger is full and has stopped logging. No alarm.-35 (-31)Unit C ( F) 1.5 ( 3) C ( F)every 12hr- 80 ( 176) C ( F)1*YearRed single flash (10 seconds)The data logger is currently logging. Low alarm.Red single flash (20 seconds)The data logger is currently logging. Low alarm. However, the battery is low and should be replaced beforeEL-WIN-USB (CONTROL SOFTWARE)logging important data.Control Solution’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the controldoubleflash (10seconds)software runs under Windows XP, Vista & 7.RedThesoftwareis usedto set-up the data logger as well as download, graph and exportLEDdata toGreenExcel.Red LEDThe data logger is currently logging. High alarm.Red double flash (20 seconds)The data logger is currently logging. High alarm. However, the battery is low and should be replaced beforelogging important data. Logger name C, FRed/Green single flash (20 seconds)The data logger is full and has stopped logging. Alarm (high, low or both). Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) High and low alarms with optional LED indicator delayNo LEDs flash Immediate, delayed and push-to-start loggingThe data logger is stopped, the battery is empty or there is no battery fitted. Display off, on for 30 seconds after buttonpress, or permanently on Data rollover (allows unlimited logging periodsby overwritingthe oldestRed tripleflash (10 seconds)data when the memory is full)The data logger is currently logging, but the probe has been disconnected.The latest version of the control software may be downloaded free of charge from l Solutions, Inc. 35851 Industrial Way, Suite D, St. Helens, OR 97051888 311-0636888-311-0636Appliesto VFC 5000Appliesto VFC-6000LCD TPPagePage1 of 44 of 5
VFC-6000 LCDTemperatureVFC5000 TPData Logger with LCDTemperatureProbe Data Logger with LCD and USB InterfaceFEATURES -35 to 80 C (-31 to 176 F) measurement range USB interface for set-up and data downloadDIMENSIONS21.2 (0.83) User-programmable alarm thresholds with optionalAll dimensions in mm (inches)LED indicator delay Delayed Alarm Settings: - select number of consecutivereadings in an alarm condition before it is indicated bythe LED’s. Status indication via red, green and orange LEDs High contrast LCD, with two and a half digit temperaturedisplay function Immediate, delayed and push-to-start logging Supplied with replaceable internal lithium battery and134.5 (5.29)Windows control software23.9 (0.94)This standalone data logger measures and stores up to 16,378 temperature readings over a -35 to 80 C (-31 to 176 F) range. The usercan easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and runningthe purpose designed software under Windows XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.The high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current,maximum and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically cal-35 (-31)MaximumUnit 80 ( 176) C ( F)resolutionWeInternalrecommendthat you replace the battery every 6 months, or prior to logging critical data.0.5 (1)Accuracy (overall error) C ( F) 0.5 ( 1) 1.5 ( 3) C ( F)TheLoggingVFC 5000dischargedor when the battery is replaced;however, the data rate TP does not lose its stored readings when the battery isevery10severy sbeen down- C ( F)Operating temperature range-35 (-31) 80 ( 176)loadeda PC.LithiumThe Softwareand LED’s will notify user when battery is low1/2AAto3.6VBattery life1*Year* At 25 C and 1 minute logging rateNote:EL-WIN-USB (CONTROL SOFTWARE)Leaving the VFC 5000 TP plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.Control Solution’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the controlsoftware runs under Windows XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and exportWARNINGdata to Excel.Handle lithium batteries carefully, observe warnings on battery casing. Dispose of in accordance with local regulations. Logger name C, F Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) High and low alarms with optional LED indicator delay Immediate, delayed and push-to-start logging Display off, on for 30 seconds after button press, or permanently on Data rollover (allows unlimited logging periods by overwriting the oldestdata when the memory is full)The latest version of the control software may be downloaded free of charge from l Solutions, Inc. 35851 Industrial Way, Suite D, St. Helens, OR 97051888 311-0636888-311-0636Appliesto VFC-6000LCD TPAppliesto VFC 5000PagePage1 of 54 of 5
temperature readings. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 6 months. VFC 5000 TP Temperature Probe Data Logger with LCD and USB Interface FEATURES -40 to 125 C (-40 to 257 F) probe measurement range High contrast LCD with temperature display
