Transcription
Ø 2.75Smaller and Stronger.
JD ICON ULTRA.SSMALLER AND STRONGERØ 2.75JDIcon Ultra S is a two-piece implant with 2.75mm diameter andinternal conical connection.It is the smallest implant withinternal connection evermanufactured.Despite its small diameterJDIcon Ultra.S provides a highimplant strength due to itsinnovative fixture design and itstight conical connection.The results of fatigue strength tests conducted on JDIcon Ultra Simplant indicate that it is even stronger than implants withlarger diameter. (see table below)IMPLANT CONCEPT AND STRENGTH TESTSJDIcon Ultra.S is ideal for areas with limited spaces, such as missing lateral incisors.It is intended for use for single-tooth restoration and in implant fixed partial dentures (implant bridges) in incisors and canine areas.In the premolar area, it is intended for use in implant fixed partial dentures (implant bridges) in patients with no parafunctional habits. Incase of narrow ridge dimensions, a simplified surgical protocol in combination with the conservative dimensions of this dental implantfacilitate the resolution of dental implant cases which would have otherwise required the use of bone augmentation and highertreatment costs.MAXIMUM FATIGUE STRENGTH (N)250JDICON ULTRA.S (250 N)*220Straumann Narrow Neck CrossFit , 3.3 mmRoxolid Material**Straumann Bone Level NC, 3.3 mmRoxolid Material**190160Nobel Active 3.0***130Astra Tech 3.0S***100Fatigue strength is the maximum force an implant / abutment structurecan survive for at least five million cycles. JDIcon Ultra.S has been testedaccording to ISO 14801 that is accepted by many regulatory agenciesincluding FDA and Notified Bodies (CE).*All tests on JDICon Ultra S were conductedby Politecnico di Milano University.** Values declared by Straumann*** Values declared by Nobel Biocare
JD ICON ULTRA.SIMPLANT MEASURES AND LENGTHSIMPLANTDIAMETERThe JDICON ULTRA.S dental implant is available in the lengths shown in this chart:Ø 2,75Ø 2,0Ø 2,3Ø 2,7581011,51315IMPLANT LENGTH PLATFORMDIAMETERABUTMENTINTERFACENote: All dimensions are expressed in millimeters.TIPDIAMETERDRILLING SEQUENCEIt is recommended to adhere to the indications of the following drilling sequence to ensure optimal primary stability of the implant.Ø 2,751,52,02,02,42,02,42,8** Until the first laser markNote: All dimensions are expressed in millimeters.Important:JDIcon Ultra S Implant is designed to withstand a maximuminsertion torque of 60 Ncm.The JDIcon Ultra S prosthetic screw is developed for amaximum insertion torque of 20 Ncm.
JD ICON ULTRA.SPRODUCT CATALOGUEImplantsØ 2,75IC27080IC27100IC27115IC27130IC27150JDIcon JDIcon JDIcon JDIcon JDIcon .752.752.752.75LLLLL81011.51315Cover ScrewISCSCover screw JDIcon Ultra.SHealing AbutmentISHA323ISHA325ISHA327Healing Abutment Ø 3.2 H 3.0 JDIcon Ultra.SHealing Abutment Ø 3.2 H 5.0 JDIcon Ultra.SHealing Abutment Ø 3.2 H 7.0 JDIcon Ultra.SISHA403ISHA405ISHA407Healing Abutment Ø 4.0 H 3.0 JDIcon Ultra.SHealing Abutment Ø 4.0 H 5.0 JDIcon Ultra.SHealing Abutment Ø 4.0 H 7.0 JDIcon Ultra.SImpression CopingsOPEN TRAYISICOT32CISICOT40CImpression coping open tray Ø 3.2 JDIcon Ultra.SImpression coping open tray Ø 4.0 JDIcon Ultra.SCLOSED TRAYISICCT32CISICCT40CImpression coping closed tray Ø 3.2 JDIcon Ultra.SImpression coping closed tray Ø 4.0 JDIcon Ultra.SProsthetic ScrewISSISSAAbutment screw JDIcon Ultra.SAbutment screw angulated JDIcon Ultra.STorque recommended 20 NcmTemporary AbutmentISTAECTemporary abutment engaging JDIcon Ultra.SGP AbutmentISGP32CISGP40CGP abutment Ø 3.2 JDIcon Ultra.SGP abutment Ø 4.0 JDIcon Ultra.STorque recommended 25 Ncm
Wax up Abutment:ISWAECWax up abutment engaging JDIcon Ultra.STorque recommended 20 NcmStraight Abutment:ISSA4020CISSA4040CStraight abutment Ø 4.0 H 2.0 JDIcon Ultra.SStraight abutment Ø 4.0 H 4.0 JDIcon Ultra.STorque recommended 20 NcmAngulated Abutment;IS15GPA40CAngulated abutment 15 Ø 4.0 JDIcon Ultra.STorque recommended 20 NcmTiBase, JDScanBody and Implant Replica CAD CAM:ISSBCECJDScanBody for JDIcon Ultra.SISTIBCTiBase engaging JDIcon Ultra.SEVSCBOWScanBody for TiBaseTorque recommended 20 NcmJDIcon ISANCImplant Replica CAD CAM forUltra.SISPMNCJD Pre-milled blanks and abutment screw JDIcon Ultra.SBall Abutment:ISBA15ISBA30ISBA50Ball abutment H 1.5 JDIcon Ultra.SBall abutment H 3.0 JDIcon Ultra.SBall abutment H 5.0 JDIcon Ultra.STorque recommended 20 NcmImplant Replica:ISANImplant replica JDIcon Ultra.SImplant and Prosthetic Drivers:ISIDImplant Driver JDIcon Ultra.SISIDLImplant Driver Long JDIcon Ultra.SEVSDPF20Screwdriver for torque wrench L20EVSDPF25Screwdriver for torque wrench L25EVSDP20Screwdriver machine prosthetic L20EVSDP25Screwdriver machine prosthetic L25EVSDP30Screwdriver machine prosthetic L30EVSDPF25AScrewdriver screw angulated for torque wrench L25EVSDPF30AScrewdriver screw angulated for torque wrench L30
JDICON.ULTRAS.ENRev. 07 of 01/04/19
Implant Replica: ISAN Implant replica JDIcon Ultra.S TiBase, JDScanBody and Implant Replica CAD CAM: Ball Abutment: ISBA15 ISBA30 ISBA50 Ball abutment H 1.5 JDIcon Ultra.S Ball abutment H 3.0 JDIcon Ultra.S Ball abutment H 5.0 JDIcon Ultra.S Implant and Prosthetic Drivers: ISID ISIDL EVSDPF20 EVSDPF25 EVSDP20 EVSDP25 EVSDP30 EVSDPF25A .
