WIXLIB

W a t e r l e s s Tr a p S e a l f o r F l o o r D r a i n sAll Trap Primers FailChoose the AlternativeWATER FLOWS DOWN, BUGS, ODORS, & SEWER GASES STAY OUTPlumbing installations including a trap primer can be expensive to install initially and often requiremaintenance due to failure. When a trap primer fails, sewer gas, bugs, and unpleasant odors canenter the building through the drain. Green Drains’ patented, easy to install design solves thesecommon issues as water can freely pass down through the Green Drain, but gases, bugs, andodors are blocked by the one way seal. The Green Drain is an eco-friendly solution comparedto the expense and hassles associated with trap primers.Scan the QR code to view ourGreen Drain demo videoPMG 1312Available in 2”, 3”, 3-1/2” & 4”

GREEN DRAIN Waterless Trap Seal for Floor DrainsPR O DU C T FE AT U RES Easy to install and easy toremove - No pliers needed. Requires no caulk orexpensive installation tool. Saves a significant amount oftime, water, costs and energy. The 3-½” fits in the barrel ofmost commercial cast irondrains for an easy retrofit intoexisting drains Sewer odors often produce a foul smell in buildings from floordrains. The Green Drain’s one-way valve eliminates those odors,and prevents the spread of dangerous bacterias that can causepotential health hazards while keeping the drain fully functional. Traditional floor drains could quickly become a doorway for pestssuch as flies, cockroaches and rodents. However, the Green Drainhas a silicone skirt attached, preventing pests from getting in. Traditional drain trap primers need to be replaced often and are apain to replace. The Green Drain takes mere seconds to install andalso acts as a barrier trap protection device. Traditional drains require consistent chemical treatments as partof their maintenance. The Green Drain eliminates the need forchemical applications, making it better on the enviroment.PRODUCTDESCRIPTIONMODELCA S E Q T Y690202” Waterless Trap SealGD10224690303” Waterless Trap SealGD10324690353-1/2” Waterless Trap SealGD103524690404” Waterless Trap SealGD10424These products are covered by one or more U.S. and foreign patents, including U.S. Patent No. 7900288 and 9027172Traditional drains allow accessfor gases, bugs and odor if notregularly maintenanced.Simply insert the proper size GreenDrain into the existing floor drain. GreenDrains can be used in most commercialfloor drains or directly into 2”, 3”, 3.5”,or 4” pipeWith the Green Drain installed, waterflows down while bugs, odors, andsewer gases stay out.500 Distribution Parkway, Collierville, TN 38017PH: (800) 888-8312 FX: (901) 853-5008plumbing@ipscorp.com ipscorp.com/greendrains.comABA015 R ev B 102016

D103GD1035--"A"Pipe SizeInch (mm)2" (51)3" (76)3 1/2" (89)--"B"HeightInch (mm)2" (51)2" (51)2" (51)Flow RateGPML/M12.034.051.045.4128.7193.0

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or acombination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of thesupplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth inthe characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the productacceptance by Authorities Having Jurisdiction.The most updated information on this Certificate of Listing is available online at pld.iapmo.orgEffective Date:July 2016Void After: July 2017Product:Floor Drain Trap Seal Protection DevicesIssued To:Green Drain Inc335 N. Puente,Unit FBrea, CA 92821Identification:Each device shall be permanently and legibly marked with the manufacturer'sFile No. 9301name or trademark and the application designation (per Table 2 of ASSE1072-2007).Product shall also bear the UPC certification mark.Packagingshall bear the manufacturer's name or trademark, model number or descriptionof the device, rating for type of floor, rated for grease-laden waste (ifapplicable), and the floor drain size.Characteristics:Barrier type floor drain trap seal protection devices.Installationinstructions shall not state or imply that the device may be used in lieu ofa trap primer.Product to be installed with other IAPMO R&T listed fittings,in accordance with the manufacturer's instructions, and the requirements ofthe latest edition of the Uniform Plumbing Code.Products listed on this certificate have been tested by an IAPMO R&Trecognized laboratory. This recognition has been granted based upon thelaboratory's compliance to the applicable requirements of ISO/IEC 17025.This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence ofnon-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

Page 2Void After: July 2017Product:Floor Drain Trap Seal Protection DevicesIssued To:Green Drain IncProducts are in compliance with the following standard(s):ASSE 1072-2007File No. 9301

Page 3Void After: July 2017Product:Floor Drain Trap Seal Protection DevicesIssued To:Green Drain IncModels:Model No.GD-2GD-3GD-3.5GD-4Description2" Drain3" Drain3.5" Drain4" DrainFile No. 9301

Page 4Void After: July 2017Product:Floor Drain Trap Seal Protection DevicesIssued To:Green Drain IncADDITIONAL COMPANY INFO:Liquid Breaker, LLCModel No.GD-102GD-103GD-1035GD-104Description2" Drain3" Drain3.5" Drain4" DrainFile No. 9301

ICC-ES ReportPMG-1312Reissued 02/2016This report is subject to renewal 02/2017EVALUATION SUBJECT:FLOOR DRAIN TRAP SEALPROTECTION DEVICESDIVISION:22 00 00—PLUMBINGSECTION:22 13 16—SANITARY WASTE AND VENT PIPINGReport Holder:GREEN DRAIN, INC.335 N. PUENTE STREETBREA, CA 92821

PMG-1312ICC-ES PMG ListingEffective Date: February 2016This listing is subject to re-examination in one year.www.icc-es-pmg.org (800) 423-6587 (562) 699-0543CSI:A Subsidiary of the International Code Council DIVISION: 22 00 00—PLUMBINGSection: 22 13 16—Sanitary Waste and Vent PipingProduct certification system:The ICC-ES product certification system includes testing samples taken from the market or supplier’sstock, or a combination of both, to verify compliance with applicable codes and standards. Thesystem also involves factory inspections, and assessment and surveillance of the supplier’s qualitysystem.Product:Floor Drain Trap Seal Protection DevicesListee:Green Drain Inc.335 N. Puente StreetBrea, CA 92821www.greendrains.comCompliance with the following codes:2015, 2012, 2009 and 2006 International Plumbing Code (IPC)2015, 2012, 2009 and 2006 International Residential Code (IRC)2015, 2012, 2009 and 2006 Uniform Plumbing Code (UPC)*2010 and 2005 National Plumbing Code of Canada ***Uniform Plumbing Code is a copyrighted publication of the International Association of Plumbing and Mechanical Officials**National Plumbing Code of Canada is a copyrighted publication of National Research Council CanadaCompliance with the following standards:ASSE 1072-2007, Performance Requirements for Barrier Type Floor Drain Trap Seal ProtectionDevices, American Society of Sanitary EngineeringCSA B79-2008 (R13), Floor, Area and Shower Drains, and Cleanouts for Residential ConstructionICC-ES LC1015, PMG Listing Criteria for Elastomeric, Normally Closed, Floor Drain EvaporationResistant Sealing System (Oct 2010)Identification:The product and/or package must bear the manufacturer’s name, the model number and the ICC-ESPMG listing mark.Installation:The Green Drain Inc. trap primer alternates are to be installed in accordance with the manufacturer'sinstructions and the applicable code.Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as anendorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as toany finding or other matter in this listing, or as to any product covered by the listing.Copyright 2016 ICC Evaluation Service, LLC. All rights reserved.Page 1 of 2

PMG-1312 Most Widely Accepted and TrustedPage 2 of 2Models:Device SIZEFLOW RATEMODELInchesmm 4.051.073.045.4128.7193.0276.3Conditions of listing:1.2.3.4.The Green Drain Inc.devices, recognized by this listing, are intended to serve as alternates tothe code- required trap primer. They must serve a functioning trap.The plumbing systems must be installed in accordance with the applicable codes.The “Device” must be accessible.The Green Drain Inc.trap primer alternates are manufactured in Xiamen, China under a qualitycontrol program with annual surveillance inspections.

2015, 2012, 2009 and 2006 International Residential Code (IRC) 2015, 2012, 2009 and 2006 Uniform Plumbing Code (UPC)* 2010 and 2005 National Plumbing Code of Canada ** *Uniform Plumbing Code is a copyrighted publication of the International Association of Plumbing and Mechanical Officials **National Plumbing Code of Canada is a .