Kgs-1060 Kgs-1060-hp

Transcription

KGS-1060KGS-1060-HPConsole & TelnetManagement Interface,User s ManualSoftware Rev.1.05 or upDOC.150608

(C) 2014-2015 KTI Networks Inc. All rights reserved. No part of this documentation may bereproduced in any form or by any means or used to make any directive work (such as translation ortransformation) without permission from KTI Networks Inc.KTI Networks Inc. reserves the right to revise this documentation and to make changes in contentfrom time to time without obligation on the part of KTI Networks Inc. to provide notification of suchrevision or change.For more information, contact:United StatesKTI Networks Inc.P.O. BOX 631008Houston, Texas 77263-1008Phone:713-2663891Fax:713-2663893E-mail: om/Fax:886-2-26983873E-mail: kti@ktinet.com.twURL:http://www.ktinet.com.tw/

The information contained in this document is subject to change without prior notice. Copyright (C)All Rights Reserved.TRADEMARKSEthernet is a registered trademark of Xerox Corp.Vitesse Switch Software. Copyright (c) 2002-2013Vitesse Semiconductor Corporation "Vitesse". All Rights Reserved.Unpublished rights reserved under the copyright laws of the United States of America, othercountries and international treaties. Permission to use, copy, store and modify, the software and itssource code is granted. Permission to integrate into other products, disclose, transmit and distributethe software in an absolute machine readable format (e.g. HEX file) is also granted. The softwaremay only be used in products utilizing the Vitesse switch products.

Table of Contents1. General. 181.1 Start your hyperterminal. 181.2 General Commands . 181.3 Command Groups. 182. System (System settings and reset options) . 202.1 Configuration. 202.2 Log Configuration. 212.3 Timezone Configuration . 212.4 Version . 212.5 Log Server Mode. 212.6 Name. 212.7 Timezone Offset. 222.8 Contact. 222.9 Log Server Address . 222.10 Timezone Acronym . 232.11 DST Configuration. 232.12 Location. 232.13 Log Level. 232.14 DST Mode . 242.15 DST start . 242.16 Log Lookup . 252.17 DST end . 252.18 Log Clear. 252.19 Reboot. 262.20 DST Offset . 262.21 Restore Default . 262.22 Load . 263. IP . 273.1 Configuration. 273.2 DHCP . 273.3 Setup. 28

3.4 Ping . 283.5 DNS. 283.6 DNS Proxy . 293.7 IPv6 AUTOCONFIG . 293.8 IPv6 Setup. 293.9 IPv6 State. 303.10 IPv6 Ping6. 303.11 NTP Configuration. 313.12 NTP Mode . 313.13 NTP Server Add . 323.14 NTP Server Ipv6 Add . 323.15 NTP Server Delete . 324. Port . 344.1 Configuration. 344.2 Mode . 344.3 Flow Control . 354.4 State. 354.5 MaxFrame . 354.6 Power . 364.7 Excessive . 364.8 Statistics. 364.9 VeriPHY . 374.10 SFPDDM . 375. MAC . 385.1 Configuration. 385.2 Add. 385.3 Delete. 385.4 Lookup . 395.5 Agetime . 395.6 Learning . 395.7 Dump. 405.8 Statistics. 405.9 Flush . 406. VLAN . 42

6.1 Configuration. 426.2 PVID. 426.3 FrameType. 436.4 IngressFilter . 436.5 tx tag . 436.6 PortType. 446.7 EtypeCustomSport . 446.8 Add. 446.9 Forbidden Add. 456.10 Delete. 456.11 Forbidden Delete. 456.12 Forbidden Lookup . 456.13 Lookup . 466.14 Name Add . 466.15 Name Delete . 476.16 Name Lookup. 476.17 Status . 477. PVLAN . 487.1 Configuration. 487.2 Add. 487.3 Delete. 497.4 Lookup . 497.5 Isolate. 498. Security . 518.1 Switch. 518.1.1 Users. 518.1.1.1 Configuration. 518.1.1.2 Add. 518.1.1.3 Delete. 528.1.2 Privilege . 528.1.2.1 Level Configuration . 528.1.2.2 Level Group. 528.1.2.3 Level Current. 538.1.3 Auth. 53

8.1.3.1 Configuration. 538.1.3.2 Method . 538.1.4 SSH. 548.1.4.1 Configuration. 548.1.4.2 Mode . 548.1.5 HTTPS . 558.1.5.1 Configuration. 558.1.5.2 Mode . 558.1.5.3 Redirect. 558.1.6 Access. 568.1.6.1 Configuration. 568.1.6.2 Mode . 568.1.6.3 Add. 568.1.6.4 Ipv6 Add . 578.1.6.5 Delete. 588.1.6.6 Lookup . 588.1.6.7 Clear. 588.1.6.8 Statistics. 588.1.7 SNMP. 598.1.7.1 Configuration. 608.1.7.2 Mode . 608.1.7.3 Version . 608.1.7.4 Read Community . 608.1.7.5 Write Community. 618.1.7.6 Trap. 618.1.7.6.1 Mode . 628.1.7.6.2 Version . 628.1.7.6.3 Community . 628.1.7.6.4 Destination . 638.1.7.6.5 IPv6 Destination . 638.1.7.6.6 Authentication Failure . 638.1.7.6.7 Link-up . 648.1.7.6.8 Inform Mode . 648.1.7.6.9 Inform Timeout . 64

8.1.7.6.10 Inform Retry Times. 648.1.7.6.11 Probe Security Engine ID. 658.1.7.6.12 Security Engine ID . 658.1.7.6.13 Security Name. 658.1.7.7 Engine ID . 668.1.7.8 Community . 668.1.7.8.1 Add. 668.1.7.8.2 Delete. 678.1.7.8.3 Lookup . 678.1.7.9 User. 678.1.7.9.1 Add. 678.1.7.9.2 Delete. 688.1.7.9.3 Changekey . 688.1.7.9.4 Lookup . 698.1.7.10 Group . 698.1.7.10.1 Add. 698.1.7.10.2 Delete. 708.1.7.10.3 Lookup . 708.1.7.11 View . 708.1.7.11.1 Add. 708.1.7.11.2 Delete. 718.1.7.11.3 Lookup . 718.1.7.12 Access. 718.1.7.12.1 Add. 728.1.7.12.2 Delete. 728.1.7.12.3 Lookup . 738.1.8 RMON . 738.1.8.1 Statistics Add . 738.1.8.2 Statistics Delete . 748.1.8.3 Statistics Lookup . 748.1.8.4 History Add. 748.1.8.5 History Delete. 758.1.8.6 History Lookup . 758.1.8.7 Alarm Add . 75

8.1.8.8 Alarm Delete . 768.1.8.9 Alarm Lookup . 778.1.8.10 Event Add. 778.1.8.11 Event Delete. 778.1.8.12 Event Lookup . 788.2 Network . 788.2.1 Psec . 788.2.1.1 Switch. 788.2.1.2 Port. 798.2.2 Limit. 798.2.2.1 Configuration. 798.2.2.2 Mode . 798.2.2.3 Aging . 808.2.2.4 Agetime . 808.2.2.5 Port. 808.2.2.6 Limit. 818.2.2.7 Action . 818.2.2.8 Reopen. 828.2.3 NAS. 828.2.3.1 Configuration. 828.2.3.2 Mode . 838.2.3.3 State. 838.2.3.4 Reauthentication . 838.2.3.5 ReauthPeriod . 848.2.3.6 EapolTimeout . 848.2.3.7 Agetime . 848.2.3.8 Holdtime . 848.2.3.9 RADIUS QoS . 858.2.3.10 RADIUS VLAN . 858.2.3.11 Guest VLAN . 868.2.3.12 Authenticate . 878.2.3.13 Statistics. 878.2.4 ACL . 878.2.4.1 Configuration. 88

8.2.4.2 Action . 888.2.4.3 Rate. 898.2.4.4 Add. 898.2.4.5 Delete. 918.2.4.6 Lookup . 918.2.4.7 Clear. 918.2.4.8 Status . 928.2.4.9 Port State . 928.2.5 DHCP . 928.2.5.1 DHCP Relay. 938.2.5.1.1 Configuration. 938.2.5.1.2 Mode . 938.2.5.1.3 Server. 938.2.5.1.4 Information Mode . 948.2.5.1.5 Information Policy. 948.2.5.1.6 Statistics. 948.2.5.2 DHCP Snooping. 958.2.5.2.1 Configuration. 958.2.5.2.2 Mode . 958.2.5.2.3 Port Mode. 958.2.5.2.4 Statistics. 968.2.6 IP Source Guard . 968.2.6.1 Configuration. 968.2.6.2 Mode . 978.2.6.3 Port Mode. 978.2.6.4 Entry. 978.2.6.5 Status . 988.2.6.6 Translation . 988.2.7 AR

Security Switch SNMP Trap Link-up [enable disable] Parameters: enable : Enable SNMP trap link-up and link-down . disable : Disable SNMP trap link-up and link-down (default: Show SNMP trap link-up and link-down mode) 8.1.7.6.8 Inform Mode . Description: Set or show the SNMP trap inform mode. Syntax: