WIXLIB

WorksaverCompact Grapple RakeDesigned for compact tractors up to 50 horsepower that are equipped with a front loader.This 60-inch wide grapple allows the acreageowner unsurpassed versatility in clearing brush,piling limbs or orchard maintenance. Ideal forloading limbs, orchard prunings, piling brushand other hard to handle materials. Unique upper grapple design of 3/8” steelprovides clamping force to hold materialsecurely. Design allows brush and other materials tobe picked up while leaving the dirt. Size compatible with the lift capacity of mostsmall loader tractors. Lower tines of 5/8” steel feature weld-on tinepoints, for easy, clean debris pick-up. Simple efficient design with few movingparts for long life. Pivot points have lubrication capabilities. Tractor front loader model allows use ofstandard pin-on bracket or select interfacingquick attach brackets for John Deere, AGCO,CNH, Kubota and other brands.Sub-Compact Tractor Mini GrappleSmall size, big versatility the CTMG 48-inch grapple forsub-compact / compact tractors up to 35-hp handles limbs,prunings, debris and so much more. Single upper grapple of 3/8”steel is 31” wide with CNC cut gripping notches cut into the tinesto help retain brush and other loose materials. 48-inch lower rakeis made from 1/2 “steel also featuring gripping notches to helpretain loose materials. Heavy-wall tubing runs through the lowertines with gussets placed at each point of contact for addedstrength. Two models are available, CTMG-48S for those loaderswith the skid steer type mount, and CTMG-48JD for those loadersthat use the John Deere hook & pin type quick attach mount(200X, 200CX, D120, D160, H120, H130, H160). Both unitsfeature standard parking stand for easy storage & parkingof the unit on a hard flat surface. Sized to allow use on sub-compact / compact tractorsup to 35-hp. Upper grapple, lower tines have gripping notchesto help retain loose materials. Greaseable pivot points for long service life. Shipped less hoses & fittings, allowing the dealer tocorrectly match the hose length to the tractor / loader.8

Compact Grapple Rake Specifications – Designed for tractors up to 50 HP onlyFLGR-4062FLGR-4062SOverall Width (in/mm)60 / 152460 / 1524Overall Depth (in/mm)23 / 584.223 / 584.238.77 / 984.7538.77 / 984.75Grapple Opening (in/mm)Overall Height Closed (in/mm)27 / 685.827 / 685.8Upper Grapple Widths (in/mm)34 / 836.634 / 836.615 / 38115 / 38155YesYesTine Spacing (in/mm)Number of Lower TinesReinforcing Tubes Between Lower TinesNumber of Hydraulic CylindersCylinder Bore (in/mm)Cylinder Stroke (in/mm)Cylinder Rod Diameter (in/mm)Cylinder Pressure Rating (psi/bar)Mounting for Tractor Loader (FLGR)Weight FLGR Model (lbs/kg)Product No. FLGR Models (loader)112 / 50.82 / 50.88 / 203.28 / 203.21.125 / 28.571.125 / 28.573000 / 2073000 / 207Mgt. Brt. Available *“Universal” Skid Steer359 / 180.98364 / 180.98811460811480*Optional interfacing quick attach brackets available for most popular loaders.WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Sub-Compact Tractor Mini Grapple Specifications – Designed for tractors up to 35 HP onlyCTMG-48SOverall Width (in/mm)CTMG-48JD48 / 12248 / 122Mount TypeSkid SteerJD Quick-change CarrierOverall Height Closed (in/mm)32.75 / 83232.75 / 832Grapple Opening (in/mm)33 / 83833 / 838Upper Grapple Widths (in/mm)31 / 78731 / 787Lower Grapple Width (in/mm)48 / 121948 / 1219Tine Spacing (in/mm)7.5 / 1917.5 / 191Number of Tines/Grapples (lower/upper)7/47/4Reinforcing Tubes Between Lower TinesYesYes11Number of Hydraulic CylindersCylinder SizeWeight (lbs/kg)Product No.2” x 8”2” x 8”320 / 145310 / 140811850811855WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.9

WorksaverSARGTM Sweep ActionRock GrappleHandles rocks and so much more, this isnot just another grapple. it is the bestgrapple you will ever own. Revolutionizingthe way rock grapples work, the SARGTM(Sweep Action Rock Grapple) fromWorksaver makes life easier. With itspatent pending design, the SARG allows theoperator to sort large or small rocks andhandle almost all kinds of debris, resultingin low cost of ownership.The front hydraulically controlled grappleswith its spring and hinge design operates ina sweeping action to pull rocks and debrisinto the unit. The springs hold the frontsweep grapples open to allow material intothe bucket, the hydraulic cylinders then pullthe sweep grapples closed. Grapple designretains the rocks or debris, allowing theoperator to rock the attachment to sift dirtout of the material. Through the tube hoserouting provides protection for the hoses,and connect under pressure flat-facecouplers make hook up a breeze. Rocks,brush, logs, stumps, debris or scrap, theSARG handles them all.See it in action!10

The SARG with its 66 degrees of sweepallows the operator to move rocks ofvarying sizes into the bucket. The sweepclamp operates like fingers movingmaterial into and retaining it in the bucket.(Right) Bolt-on side plates hold smallerrocks in the bucket. They can beremoved from the bucket to allow theSARG to handle logs and stumps.SARG-72SARG-84Overall Width (in/mm)72 / 182984 / 2134Bucket Depth (in/mm)34 / 86434 / 864Upper Grapple Width (in/mm)34 / 86440 / 1016Length of Sweep Clamp (in/mm)21 / 53321 / 5336666Degrees of Sweep45 / 114345 / 1143Cylinder Size (in/mm)Grapple Opening (in/mm)2 x 14 / 51 x 3562 x 14 / 51 x 356Tine Diameter (in/mm)1.25 / 31.751.25 / 31.75N/AN/AStandardStandardN/AN/A“Universal Skid Steer”“Universal Skid Steer”1194 / 5421375 / 610812120812160Solid BottomRemoveable End PlatesBolt On Cutting EdgeMount TypeWeight (lbs/kg)Product No.WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Choose Worksaver For All Your Material HandlingWorksaver is taking a differentapproach to material handling needs.11

WorksaverSARGTM Sweep Action RockGrapple – for Mini Skid SteerRocks are no problem the 42-inch SweepAction Rock Grapple with it’s 39-inch wideupper grapple sweeps rocks into the tinebucket and retains them there. The bucketfeatures tines of solid 1” material spaced on3” centers to retain rocks while allowing thedirt to be sifted out. Universal mini skid steer mount – fits ToroDingo, Boxer, Ditch Witch, Ramrod , Vermeerand others, does not fit Bobcat, Gehl orKanga Kid. Single sweep action grapple to pull rocks &debris into the bucket. Hoses and connect under pressure couplersare standard equipment. Bolt-on side plates are standard to helpretain smaller rocks if needed. Optional bolt-in solid bottom available toretain smaller materials.Mini Skid Steer/CompactTool Carrier GrappleThis tool consistently delivers high performance whileoffering the owner a great return on investment. ModelMGU-48 is designed to fit any unit with the “UniversalMini Mount” (Toro-Dingo, Boxer, Ditch Witch, Ramrod,etc.). Model MGB/G-48 is designed to fit the BobcatMT-Series as well as the Gehl 1640E. Overall unit width is48”. Offers great versatility in clearing brush, piling limbs,orchard prunings or other hard to handle materials. Single upper grapple provides clamping force to holdmaterial securely. Mainframe design allows brush and other materials tobe picked up while leaving the dirt. Good forward visibility for easy control in close quartersfor increased productivity. Hoses and couplers are standard equipment.12

SARG-42 SpecificationsSARG-42SARG-42B/GOverall Width (in/mm)42 / 106742 / 1067Bucket Depth26 / 66026 / 660Upper Grapple Width(in/mm)39 / 99139 / 991Degrees of Sweep6666Grapple Opening(in/mm)21 / 53321 / 5332 x 8 / 51 x 2032 x 8 / 51 x 203Cylinder Size (in/mm)Tine Diameter (in/mm)1 / 25.41 / 25.4Removable End PlateStandardStandardUniversal Mini SkidBobcat MT-Series433 / 196453 / 205Product No.812230812230Optional Bolt-in BottomProduct No.812265TBAMount typeWeight (lbs/kg)WARNING: Read and understand the operator’s manual beforeoperation. Be sure tractor/skid steer is properly counterbalanced.Damage to equipment or personal injury could occur.Optional bolt-in bottom of 10-gauge steel item#812265 is available. (Side plates shown installed)Mini Skid Steer/Compact Tool Carrier Grapple SpecificationsMGU-48Overall Width (in/mm)MGB/G-4848 / 12248 / 122Overall Height Closed (in/mm)32.75 / 83232.75 / 832Upper Grapple Width (in/mm)31 / 78731 / 787Tine Spacing (in/mm)7.5 / 1917.5 / 191YesYes11Mounting Type“Universal Mini Skid”Bobcat MT-SeriesWeight (lbs./kg)290 / 132310 / 141811730811740Reinforcing Tubes Between Lower TinesNumber of Hydraulic CylindersProduct No.WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.13

WorksaverManure / Silage Forks Designed for picking up manure,silage, matted straw or otherloose materials. Produces cleaner stalls with lessphysical effort. Excellent for handling silage, uppergrapple helps secures load duringtransport improving productivity. All units feature forged crankedtines for extended service life. Units with upper grapple and skidsteer mount are supplied with hosesand connect under pressure couplersfor ease of installation. Models with upper grapple havegreaseable pivot points for long life. Cylinder pivot points utilizereplaceable harden bushing toreduce wear. Models with upper grapples can beused for picking up tree limbs andbrush increasing their versatility. Mount types: John Deere, “Universal”Skid Steer, and models to acceptbolt-on front loader brackets.14

Manure / Silage / Debris Forks Designed for use on Skid Steers and Tractor Front LoadersModels interface with loaders that use the “universal” skid steer mount erall Width (in/mm)59.5 / 151166 / 167671.5 / 181659.5 / 151171.5 / 1816Overall Depth (in/mm)31 / 78731 / 78731 / 78731 / 78731 / 787Overall Height (in/mm)21.5 / 54621.5 / 54621.5 / 54623.5 / 59723.5 / 597Upper Grapple (in/mm)NoNoNoYesYesUpper Grapple Width (in/mm)N/AN/AN/A34 / 86434 / 864Useable Tine Length (in/mm)27 / 68627 / 68627 / 68627 / 68627 / 686Number of Tines8910810Forged Tine TypeCrankedCrankedCrankedCrankedCrankedTine Spacing (in/mm)7.5 / 1907.5 / 1907.5 / 1907.5 / 1907.5 / 190Mounting TypeSkid SteerSkid SteerSkid SteerSkid SteerSkid SteerWeight (lbs/kg)225 / 102240 / 109270 / 122375 / 170450 / 204812305812400812315812310812320Product No.Manure / Silage / Debris Forks Designed for use on Tractor Front LoadersModels interface with John Deere Series 0JDM/SG-72JDOverall Width (in/mm)50 / 127059.5 / 151166 / 167671.5 / 181659.5 / 151171.5 / 1816Overall Depth (in/mm)31 / 78731 / 78731 / 78731 / 78731 / 78731 / 787Overall Height (in/mm)21.5 / 54621.5 / 54621.5 / 54621.5 / 54623.5 / 59723.5 / 597Upper Grapple (in/mm)NoNoNoNoYesYesUpper Grapple Width (in/mm)N/AN/AN/AN/A34 / 86434 / 864Useable Tine Length (in/mm)27 / 68627 / 68627 / 68627 / 68627 / 68627 / 686Number of Tines78910810Forged Tine TypeCrankedCrankedCrankedCrankedCrankedCrankedTine Spacing (in/mm)7.5 / 1907.5 / 1907.5 / 1907.5 / 1907.5 / 1907.5 / 190Mounting TypeJD 200 / 300JD 400 / 500JD 400 / 500JD 400 / 500JD 400 / 500JD 400 / 500Weight (lbs/kg)185 / 84220 / 100245 / 111268 / 122365 / 166445 / 202Product No.812300812335812410812345812340812350Adaptable Manure / Silage / Debris Forks for Tractor Front LoadersDesigned to be used with our optional bolt-on brackets, available for most loadersModelM/S-60UM/S-72UM/SG-60UM/SG-72UOverall Width (in/mm)60 / 152472 / 182960 / 152472 / 1829Overall Depth (in/mm)31 / 78731 / 78731 / 78731 / 787Overall Height (in/mm)28 / 71128 / 71130 / 76230 / 762Upper Grapple (in/mm)NoNoYesYesUpper Grapple Width (in/mm)N/AN/A34 / 86434 / 864Useable Tine Length (in/mm)27 / 68627 / 68627 / 68627 / 686Number of Tines810810Forged Tine TypeCrankedCrankedCrankedCranked7.5 / 1907.5 / 1907.5 / 1907.5 / 190Mounting TypeTine Spacing (in/mm)Brackets RequiredBrackets RequiredBrackets RequiredBrackets RequiredWeight (lbs/kg)285 / 129330 / 150475 / 215550 / 249812385812390812395812398Product No.Choose Worksaver For All Your Material HandlingManure Forks SpecificationsWARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.15

WorksaverPallet ForksDesigned for skid steer or tractorfront loaders, our standard palletforks have rated capacities from4,000 lbs. to 5,500 lbs. All modelsfeature solid steel alloy forks for longlife, with spring loaded latches foreasy adjustment spacing. Skid steer pallet forks (4,000 lbs.)are offered with a one piecebackstop or a step through designfor easy cab access and excellentvisibility. Skid steer models mount withthe “Universal” quick-attachmounting system. Premium forks include springloaded latches for easyadjustment spacing. Models available with integratedbrackets for skid steers, John Deere400/500/600/700 series loaders,and loaders with euro/globalattaching method. Pallet Forks for John DeereH480 loader with Global Series IItool carrier. Optional interfacing quick-attachbrackets are available for themodel PF-448 for most popularloader models. Machined rails allow ease of forkspacing adjustment.16

Pallet Fork SpecificationsFor TractorLoadersFor Skid Steer & Tractor Front Loaderswith the “Universal” Quick Attach SystemModelEquipment Used OnSSPF-442SSPF-448SSPF-5548SSPF-3748PF-448Skid Steer LoaderSkid Steer LoaderSkid Steer LoaderSkid Steer LoaderTractor LoaderCapacity (lbs/kg)4,000 / 1,8144,000 / 1,8145,500 / 2,4954,000 / 1,8144,000 / 1,814Frame ConstructionWelded SteelWelded SteelWelded SteelWelded SteelWelded ingle PieceBolt-onMounting“Universal” Skid Steer“Universal” Skid Steer“Universal” Skid Steer“Universal” Skid SteerMgt. Brt. Available*Fork Spacing (in/mm)6–40 / 152–10166–40 / 152–10166–40 / 152–10166–40 / 152–10166–40 / 152–1016Fork CarrierBeveled Notched RailBeveled Notched RailBeveled Notched RailBeveled Notched RailBeveled Notched RailForks1.375” x 4” w/Latch 1.375” x 4” w/Latch 1.57” x 4” w/Latch 1.375” x 4” w/Latch 1.375” x 4” w/LatchFork Length (in/mm)42 / 106748 / 121948 / 121948 / 121948 / 1219Weight (lbs/kg)345 / 157359 / 163410 / 186315 / 143438 / 199832400832415832495831370831830Product No.John Deere Integrated Frame Pallet ForksModelEquipment Used 0JD Front LoaderJD Front LoaderJD Front LoaderJD Front LoaderJD Front LoaderCapacity (lbs/kg)4,000 / 1,8144,000 / 1,8145,500 / 2,4957,500 / 3,4027,500 / 3,402Frame ConstructionWelded SteelWelded SteelWelded SteelWelded SteelWelded SteelMounting400 / 500 Series JD 400 / 500 Series JD600 / 700 Series JD Global Series IIGlobal Series IIFork Spacing (in/mm)6–40 / 152–10166–40 / 152–10166–40 / 152–1016 6–56 / 152–1422Fork CarrierBeveled Notched RailBeveled Notched RailBeveled Notched Rail Beveled Notched Rail Beveled Notched RailForks1.375” x 4” w/Latch 1.375” x 4” w/Latch6–56 / 152–14221.57” x 4” w/Latch1.75” x 4.75”1.75” x 4.75”Fork Length (in/mm)42 / 106748 / 121948 / 121948 / 121960 / 1524Weight (lbs/kg)345 / 157359 / 163373 / 169785 / 356845 / 383832420832435832440834130834140Product No.Global (Euro Hook Style) Integrated Frame Pallet ForksModelEquipment Used OnCapacity (lbs/kg)Frame ConstructionMountingFork SpacingGLPF-442GLPF-448GLPF-5548Tractor Front LoaderTractor Front LoaderTractor Front Loader4,000 / 1,8144,000 / 1,8145,500 / 2,495Welded SteelWelded SteelWelded SteelEuro / Global CarrierEuro / Global CarrierEuro / Global Carrier6” to 40”6” to 40”6” to 40”Beveled Notched RailBeveled Notched RailBeveled Notched Rail1.375” x 4” w/Latch1.375” x 4” w/Latch1.57” x 4” w/LatchFork Length (in/mm)42 / 106748 / 121948 / 1219Weight (lbs/kg)335 / 152350 / 159393 / 178832452832458832460Fork CarrierForksProduct No.*Optional interfacing quick attach brackets available for most popular loaders.Note: Rated lift capacity is based on a pair of forks with no more than ½ - load per fork and load no more than halfway out on each fork.WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.17

WorksaverCompact Pallet ForksDon’t let their small size fool you. These palletforks are designed for compact tractors up to50 horsepower equipped with a front loader.Excellent for moving bulky, bagged or palletizedmaterials quickly and easily, saving time andeffort. Pallet forks are rated at 2,400 lbs. Models available with integrated brackets forJohn Deere 200/300 series loaders, as well as loaders utilizing the universalskid steer system. Fits other loaders with our FLPF model & bolt-on interfacing quick attachbrackets available for most major compact loader models.Sub-Compact Pallet ForksValue performance best describes these sub-compact pallet forks.Designed for loaders with skid steer quick attach on Sub-Compact tractors up to 35 hp. Rated at 1,250 lbs. Class I solid alloy steel forks, 36-inches in length. Skid Steer “Universal” style mount. Spring loaded latches for easy adjustment spacing.Mini Skid Steer Pallet ForksPallet Forks designed for Mini Skid Steers / Compact Tool Carriers. Rated at either 1,200 lbs. or 2,000 lbs. All models utilizes Class I solid steel alloy forks. Fits Toro-Dingo, Ramrod, Boxer, Ditch Witch and others with“Universal” mounting system. Model available for Bobcat MT-series (MT-50, MT-52, MT-55).Clamp-On Bucket ForksThese Clamp-On Bucket Forks are built to meet the demands of today’sacreage owner. Easy on/off design offers the utmost in conveniencewhen moving palletized materials. Designed for handling palletized material only. Useable fork length of 35 or 42 inches, depending on model. Forks extend 14.5 Inches under bucket, 8 in. inside bucket. Completely independent – allows fork adjustment to any pallet width. Mounts to most loader buckets without the use of tools – easy on/off design. Rated from 1,000 to 4,000 lbs. Lift is limited by fork capacity or loader capacity, whichever is less. Each fork has a built-in stake pocket for a 2 x 4 to be installed as an upright backstop (recommended).18

Equipment Used OnFLPF-2000*SSPF-242JDPF-2000Loaders* 50 hpLoaders 50 hpJD 200 / 300 Series2,400 / 1,0892,400 / 1,0892,400 / 1,089Weight Capacity (lbs/kg)Frame ConstructionFork Spacing (in/mm)Fork CarrierForksWelded SteelWelded SteelWelded Steel6 – 40 / 152 – 10166 – 40 / 152 – 10166 – 40 / 152 – 1016Beveled Notched RailBeveled Notched RailBeveled Notched Rail1.18” x 3” w/Latch1.18” x 3” w/Latch1.18” x 3” w/LatchFork Length (in/mm)42 / 106742 / 106742 / 1067Weight (lbs/kg )270 / 123290 /

Material Handling Equipment www.worksaver.com Engineered, Designed and Manufactured in the USA. Worksaver 2 3 . ETG Series Tine Grapple Specifications For All Your Material Handling ETG-26 Series Tine Grapple Specifications ETG-26 ETG-26-JD ETG-26-G Overall Width (in/mm) 71.75 / 1822 71.75 / 1822 71.75 / 1822 .