Transcription
STANLEY DOOR CLOSERSPRODUCT INTRODUCTIONDistributed ByDH Pace National Key Service om/BestSolutions
TABLE OF CONTENTS & DOOR CLOSER INTRODUCTIONTABLE OF CONTENTSPagePageD-1650/D-1651 General Information .6D-1650/D-1651 Applications.6D-4550/D-4551 How to Order .7D-3550/D-3551 How to Order .7D-1650/D-1651 How to Order .7Door Closer Introduction .2Door Closer Features .3D-4550/D-4551 General Information .4D-4550/D-4551 Applications.4D-3550/D-3551 General Information .5D-3550/D-3551 Applications.5DOOR CLOSER INTRODUCTIOND-4550/D-4551 Stanley Door CloserThe model D4550 Series is Stanley’s best performing Heavy Duty Closer. The cylinder body is manufactured using R-14 SiliconAluminum Alloy providing superior strength and durability on institutional applications. Available in a variety of standard andheavy-duty arm configurations accommodating a broader range of today’s growing architectural application requirements.(1)(2)(3)(4)(5)opening swing, no checkingbackcheckgeneral speedlatch speedadvanced variable backcheckD-3550/D-3551 Stanley Door CloserThe model D3550 Series is Stanley’s most versatile Door Closer. The reduced body profile provides ease of installation on a varietyof applications. In addition the R-14 Silicon Aluminum construction provides dependable performance under heavy loads associatedwith high use institutional applications. The D3550 Closer accommodates a variety of standard and heavy-duty arm applications.(1) opening swing, no checking(2) backcheck(3) general speed(4) latch speedD-1650/D-1651 Stanley Door CloserThe D-1650 Series is Stanley’s economical grade closer accommodating the standard aluminum storefront installation footprint. TheD-1650 is packaged with a tri-pack arm arrangement providing universal mounting capablities.(1) opening swing, no checking(2) backcheck(3) general speed(4) latch speedDelayed Action - OptionalThe D-4550DA / D-4551DA and D-3550DA / D-3551DA Series Door Closers are equiped with a seperate hydraulic valve adjustment todelay the closing speed from 180 to 70 degrees of door opening range.DADelayRange2SweepAngleDOORCLOSER
Fully Hydraulic CheckingControls the door through the entire opening and closing cycles by providing adjustable backcheck upon opening and adjustinggeneral and latch speeds through the closing cycle.Adjustable Spring PowerThe D-4550/D-4551 Series Door Closers are designed to have the widest range of spring power adjustment available to meet thebroadest range of aplication requirements.The D-3550 Series Door Closers are adjustable from size 2 through 6 with 15% adjustment over size 6. The D-3551 Series DoorClosers are adjustable from size 1 through 4. The D-3551 Series Door Closers are designed to meet entrance accessibilityrequirements of 5 LBF opening force or less.The D-1650 Series Door Closers are adjustable from size 2 through 5 (3 lbf – 11 lbf closing force measured at 30” from the doorpivot). The D-1651 Series Door Closers are adjustable from size 1 through 4 (2 lbf – 8 lbf closing force measured at 30" from thedoor pivot). The D-1651 Series Door Closers are designed to meet entrance accessibility requirements of 5 lbf force or less.Non-HandedDOOR CLOSER FEATURESDOOR CLOSER FEATURESCan be used on both RH and LH doors for both push side and pull side mounting.All Season FluidAll season fluid eliminates the need for seasonal adjustment. All series.Non-Critical RegulationThe separate adjustments for backcheck, general and latch speeds are equipped with non-critical “V-Slot” regulating valves whichallow for fine tuning the closing and latching speeds as well as the backcheck intensity. All series.Maintenance FreeDoor Closers mounted in accordance with the provided installation instructions are maintenance free from periodic inspection andadjustment. All series.Special High Silicon Aluminum Alloy HousingAll D-4550/D-4551 & D-3550/D-3551 Series Door Closers are constructed of STANLEY’S R14 HIGH SILICON ALUMINUM ALLOY.Forged ArmsHeavy duty forged arms are interchangeable between the D-4550 and D-3550 Series Door Closers only.High Impact CoverAll D-4550 / D-4551 and D-3550/D-3551 Series Door Closers are shipped with a high impact self-extinguishing decorative cover.Optional - High impact self-extinguishing decorative cover is available on all Stanley D-1650 / D-1651Series Door Closer.Metal Cover - optionalAn optional stainless steel, brushed finish metal cover is available.D-4550/D-4551 series only.Special Rust Inhibitor (SRI) - optionalFor installations where a higher level of corrosive resistance is required. D-4550/D-4551 & D-3550/D-3551 series only.Advanced Variable Backcheck (AVB) - optionalCylinder starts backcheck at approximately 45º instead of the normal 75º. Add suffix “AVB” to selected cylinder. When combinedwith Delayed Action consult factory for special template. (Heavy Duty Arm applications). D-4550/D-4551 series only.HandingPULL SIDEPULL SIDEPUSH SIDEPUSH SIDELEFT HAND DOORRIGHT HAND DOORINTRODUCTION3
D-4550/D-4551 GENERAL INFORMATIOND-4550/D-4551 APPLICATIONSD-4550/D-4551 GENERAL INFORMATIONClosing Power AdjustmentD-4550* – Size 2 – 6 with 50% with springpower adjustment over size 6.* Meets ADA 5lb opening forcerequirements on all applicationsexcept Pull-Side Regular Arm Mount.The D-4550 Series is adjusted to size 3before leaving the factory.D-4551** – Size 1 – 5 with 35% springpower adjustment over size 5.**Meets ADA 5lb opening forcerequirements.PackingAll D-4550 / D-4551 Series Door Closers withstandard arm sets are packed for mounting onstandard, parallel arm or top jamb applications. Allcloser assemblies are packed 4 per carton. Tracksfor track mounted closers are packed separately.Through Bolts and Sex NutsSpring Adjusting NutLess PowerMore PowerANSI and U.L. SpecificationsThe D-4551 Series is adjusted to size 2before leaving the factory.Latching Power AdjustmentThe D-4550 / D-4551 Series DoorClosers have the provision to adjustthe leverage of the arms by changingthe pivot position of the arm in theshoe. The shoe itself does not haveto be removed from the door or jamb.Delayed ActionA delayed action feature is availablewith this series for all applicationsand arms. The feature permits thedoor to close very slowly through thedelayed action cycle range. To orderadd suffix DA to closer number.When through bolting is ordered, factory willfurnish sex nuts for use with the machine screwsfurnished with the closer. Nuts are sized to accommodate 1-3/8" or 1-3/4" thick doors.The D-4550/D-4551 SeriesDoor Closers have beenCertified to the requirementsof the ANSI/BHMA Standard A156.4-2000 Grade 1.Standard PositionBackcheck ValveDelayedAction ValveGeneralSpeed ValveUL listed with Underwriters’ Laboratories, Inc. andUnderwriters’ Laboratories of Canada for “SelfClosing Doors Without Hold-Open Feature”.(File number 7525R).UL10C – UBC 7.2D-4550/D-4550 closers have been tested andcertified to meet the positive pressure criterrion ofUL10C & UBC 7.2 (1997)Latch Speed ValveD-4550/D-4551 APPLICATIONSD-4550 REGD-4550H REGRegular ArmD-4550 TD-4550HTD-4550 TJD-4550H TJTop JambD-4550 TCSTrackD-4550 PAD-4550H PHParallel ArmD-4550 EDAD-4550H EDAHeavy Duty ArmDOORFor detail information please refer to Stanley Door Closer D-4550/D-4551 catalog.4D-4550 SD-4550H HSHeavy DutyArm & StopD-4550 CSD-4550H HCSHeavy Duty Arm& CompressionStopCLOSER
PackingD-3550 – Size 2 – 6 with 15% adjustmentover size 6. The D-3550 Series isadjusted to size 3 before leaving thefactory.D-3551 – Size 1 – 4 with 15% adjustmentover size 4. The D-3551 Series DoorCloser is specially designed for doorswhere the door opening forces shall be5 LBS or less through 90 . The D-3551Door Closer is adjustable up to a size 4.The D-3551 Series is adjusted to size 2before leaving the factory.Latching Power AdjustmentThe D-3550 / D-3551 Series DoorClosers have the provision to adjust theleverage of the arms by changing thepivot position of the arm in the shoe.The shoe itself does not have to beremoved from the door or jamb.Delayed ActionA delayed action feature is availablewith this series for all applications andarms. The feature permits the door toclose very slowly through the delayedaction cycle range. To order add suffixDA to closer number.All D-3550 / D-3551 Series Door Closers withstandard arm sets are packed for mounting onstandard, parallel arm or top jamb applications. Allcloser assemblies are packed 4 per carton. Tracksfor track mounted closers are packed separately.Spring Adjusting NutLess PowerMore PowerThrough Bolts and Sex NutsWhen through bolting is ordered, factory will furnishsex nuts for use with the machine screws furnishedwith the closer. Nuts are sized to accommodate1-3/8" or 1-3/4" thick doors.ANSI and U.L. SpecificationsThe D-3550/D-3551 SeriesDoor Closers have beenCertified to the requirements ofthe ANSI/BHMA Standard A156.4 - 2000 Grade 1.Standard PositionGeneral Speed ValveListed with Underwriters’ Laboratories, Inc. andUnderwriters’ Laboratories of Canada. “For SelfClosing Doors Without Hold-Open Feature” eck ValveD-3550 / D-3551 Series Door Closers have beencertified by UL to be in compliance with UL 10 Cand UBC 7.2 (1997).D-3550/D-3551 APPLICATIONSD-3550 REGD-3550H REGRegular ArmD-3550 TD-3550HTD-3550 TJD-3550H TJTop JambD-3550 TCSTrackD-3550 PAD-3550H PHParallel ArmD-3550 EDAD-3550H EDAHeavy Duty ArmINTRODUCTIONFor detail information please refer to Stanley Door Closer D-3550/D-3551 catalog.D-3550 SD-3550H HSHeavy DutyArm & StopD-3550/D-3551 GENERAL INFORMATIONClosing Power AdjustmentD-3550/D-3551 APPLICATIONSD-3550/D-3551 GENERAL INFORMATIOND-3550 CSD-3550H HCSHeavy Duty Arm& CompressionStop5
D-1650/D-1651 GENERAL INFO.D-1650/D-1651 GENERAL INFORMATIONClosing Power AdjustmentPackingAll D-1650 / D-1651 Series Door Closers withstandard arm sets are packed for mounting onstandard, parallel arm or top jamb applications.All closer assemblies are packed 10 per carton.Tracks for track mounted closers are packedseparately.The D-1650 / D-1651 Series DoorClosers have the provision to adjustthe leverage of the arms by changingthe pivot position of the arm in the foot;thus the closing force at the latch canbe increased or decreased.Spring Adjusting NutThrough Bolts and Sex NutsLess PowerMore PowerWhen through bolting is ordered, factory willfurnish sex nuts for use with the machine screwsfurnished with the closer. Nuts are sized to accommodate 1-3/8" or 1-3/4" thick doors.ANSI and U.L. SpecificationsThe D-1650/D-1651 SeriesDoor Closers have beenCertified to the requirements ofthe ANSI/BHMA Standard A156.4 - 2000 Grade 1.Standard PositionGeneral Speed ValveListed with Underwriters’ Laboratories, Inc. andUnderwriters’ Laboratories of Canada. “For SelfClosing Doors Without Hold-Open Feature” onR7525(R).LatchSpeedValveD-1650/D-1651 APPLICATIONSBackCheck ValveD-1650/D-1651 APPLICATIONSD-1650 REGD-1650H REGRegular ArmD-1650FC Optional Full CoverD-1650 TD-1650HTD-1650 TJD-1650H TJTop JambD-1650 TCSTrackDOORFor detail information please refer to Stanley Door Closer D-1650/D-1651 catalog.6D-1650 PAD-1650H PHParallel ArmCLOSER
DAModel No.SizeOptionsD-455EDAArmType0– See Closing AVB – advancedL– Long Rod Forearm (TJ only)Powervariable backcheck H – Standard Hold OpenPH – Parallel Hold OpenAdjustment(optional)page 4DA – Delayed Action EDA – Heavy Duty ArmH-EDA – Heavy Duty Arm w/ Hold1– See Closing(optional)OpenPowerMC – Metal CoverS – Heavy Duty Arm w/ StopAdjustment(optional)CS – Heavy Duty Arm w/page 4Compression StopHS – Heavy Duty Arm w/ HoldOpen & StopHCS – Heavy Duty Arm w/ HoldOpen & Comp. StopT – Track MountHT – Track Mount w/ Hold OpenTCS– Track Compression Stop689SNFinishesFasteners689690691693695696SN – Sex Nuts &Bolts Wood &Machine Screwsfurnished standardSEC – SecurityScrewsHOW TO ORDER D–3550/D–3551D-3550DAEDA689SNModel No.SizeOptionsArmTypeL– Long Rod Forearm (TJ only)H – Standard Hold OpenPH – Parallel Hold OpenEDA – Heavy Duty ArmH-EDA – Heavy Duty Arm w/ HoldOpenS – Heavy Duty Arm w/ StopCS – Heavy Duty Arm w/Compression StopHS – Heavy Duty Arm w/ HoldOpen & StopHCS – Heavy Duty Arm w/ HoldOpen & Comp. StopT – Track MountHT – Track Mount w/ Hold OpenTCS– Track Compression StopFinishesFasteners689690691693695696SN – Sex Nuts &Bolts Wood &Machine Screwsfurnished standardSEC – SecurityScrewsD-3550– See Closing DA – Delayed ActionPower(optional)Adjustmentpage 51– See ClosingPowerAdjustmentpage 5HOW TO ORDER D–1650/D–1651D-1650Model No.SizeD-1650– size 2-51– size 1-4PHArmTypeL– Long Rod Forearm (TJ only)H – Standard Hold OpenPH – Parallel Hold OpenT – Track MountHT – Track Mount w/ Hold 695696SN – Sex Nuts &Bolts Wood &Machine Screwsfurnished standardSEC – 50/D-1651HOW TO ORDER D–4550/D–45517
STANLEY DOOR CLOSERSProduct information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. Errors ormistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which maybe subject to changes or modifications by the manufacturer without notice and without obligation. Therefore, no guarantee can be made or should beassumed or implied with regards to product information contained in this catalog.Product Warranty – Stanley Security Solutions warrants that all of its products sold under its trade name "Stanley" are free of defects in materials,workmanship and operation, normal wear and tear excepted, for a period of ten years from the date of sale to the original purchaser.Concerning Proper Installation: Installation instructions for any Stanley product should be carefully followed for proper operation of the installed product. Ifimproperly installed, malfunction of the product may result.Stanley Security Solutions, Inc.6161 E. 75th Street Indianapolis, Indiana 46250www.stanleysecuritysolutions.com 2007 Stanley Security Solutions, Inc. and Stanley Logistics, Inc.10M 207FPSDC011 Litho USA
ABLE OF CONTENTS & DOOR CLOSER INTRODUCTION D-4550/D-4551 Stanley Door Closer The model D4550 Series is Stanley's best performing Heavy Duty Closer. The cylinder body is manufactured using R-14 Silicon Aluminum Alloy providing superior strength and durability on institutional applications. Available in a variety of standard and
