WIXLIB

DATA COMMUNICATION SOLUTIONSZ-SERVER19"SERVER CABINETSDESCRIPTIONCABINETS FOR USE IN DATA CENTERSSTURDY DESIGN- Strong bolted frame made of steel closed profiles.- Acceptable static load: 1500 kg.MULTIPURPOSE- Smooth tool-free adjustment of 19" mounting profiles.- Mounting profiles are U-marked to simplify installation.- The width can be changed from 19" to 21" with no needto use additional mounting elemens (in 800 mm widecabinets).- Door opening angle up to 270 degrees, adjustable direction of opening.- Easy installation thanks to split side panels.- Optional mounting of partitions between cabinets at anytime of their operation.- Tool-free mounting of the top plate of cabinet.- The frame includes holes for mounting accessories.SAFETY- Multi-point cabinet locking system:3-point locking system in single-leaf doors,3-point locking system in double-leaf doors.- Locks with access control are available.PERFORMANCE- Doors with optimum perforation clearance of 80%.- Up to 86% of the door area is perforated to provideadequate cooling for the installed devices.- To optimise the flow of cold air we provide the followingcomponents to isolate cold and hot areas at the cabinetand Z-SERVER BOX server room.Z-SERVER SYSTEMThe new Z-SERVER cabinet system represents innovativequality solutions for data-processing centres.Scalable functionality and easy adaptation enabled by theavailable additional equipment:-010 ZPASREFERENCE CHARTWidthW [mm]600800DepthD [mm]1000120010001200Usable heightHU [U 44.45 mm]Frame height H [mm]Reference 801247601047601247801047801242 U45 U47 U200021002200SCOPE OF DELIVERYStandard cabinet configuration:- bolted frame,- perforated single-leaf front door,- perforated single-leaf or double-leaf rear door,- top plate with ventilation perforation and knock-outblanking plates,- two pairs of 19" mounting profiles, type PREMIUM,- earthing cables for, top plate and mounting profiles,- levelling feet.Accessories available separately:- side panels and other Z-SERVER accessories (pages 13-19),plinth (page 50),- shelves (pages 55-58), lighting kit (page 65), 19" blankingplates (page 68).TECHNICAL DATAMaterialSheet steel.Protection degreeIP 20 in accordance with EN 60529(does not apply to brush cable entries).Surface finishingSide panels, doors, top plate - powder paint, light grey(RAL 7035) or black (RAL 9005).Mounting profiles and other metal parts - galvanized.Z-SERVER BOX cold aisle installation,air flow guiding elements within a single cabinet,logical cabling arrangement elements,power supply system mounting elements.Z-SERVER cabinetsDATA COMMUNICATION SOLUTIONSFLOOR-STANDING CABINETS AND OPEN RACKS

DATA COMMUNICATION SOLUTIONSSERVER CABINETSZ-SERVER19"CONFIGURATORCATALOGUE NUMBER OF Z-SERVER CABINETW Z- Z S E RV E R -XXXXXX- 1 X 0 0 - 2 -XXXReference numberspecifies the cabinet’s overall dimensions (see reference chart).Rear door type:1 - perforated single-leaf door2 - perforated double-leaf doorCabinet's colour:011 - RAL 7035 (light grey)161 - RAL 9005 (black)FLOOR-STANDING CABINETS AND OPEN RACKSZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSZPAS 011

DATA COMMUNICATION SOLUTIONSZ-SERVER19"SERVER CABINETSDESIGNA-A sectionB-B section1(1200 mm deep cabinet)DESIGNTop plates(1200 mm deep cabinet)for 1200 mm deep cabinets1. Cabinet’s frame2. Top plate3. Upper supportfor mounting profiles4. Lower supportfor mounting profiles5. 19" mounting profiletype PREMIUMfor Z-SERVER cabinets6. Adjustable feet7. Knock-out blanking plate380 x 380 mm8. Knock-out blanking plate380 x 210 mm9. Knock-out blanking platefor cable entry10. Cable entry 20 x 84 mm(only in 600 mm widecabinets)22101133551A-A sectionB-B section(1000 mm deep cabinet)Top plates(1000 mm deep cabinet)for 1000 mm deep cabinets87Accessories:11. Central mounting profiletype PREMIUMfor Z-SERVER cabinets998Note:The cabinet in the drawingis shown without any panelsor doors.9Front view1(600 mm wide cabinet)Front view1Side view1(800 mm wide cabinet)Side view3(1000 mm deep cabinet)(1200 mm deep cabinet)351155ABAB11HHU555CDD44D-D section(1000 mm deep cabinet)12.7D 100031.75(1000 mm deep cabinet)D 1200D-D section1(1200 mm deep cabinet)51212120211014482D 12001119" mounting profiletype PREMIUMfor Z-SERVER cabinets2110525465012 ZPASCentral mounting profiletype PREMIUMfor Z-SERVER cabinets21C-C section(1200 mm deep cabinet)DUmax 1100D 10006.35C-C sectionDUmax 900n x 44.4525-35W 80044.456W 60082C1Z-SERVER cabinetsDATA COMMUNICATION SOLUTIONS46528.52FLOOR-STANDING CABINETS AND OPEN RACKS

DATA COMMUNICATION SOLUTIONSSERVER CABINETSZ-SERVER19"ACCESSORIESSplit side panelsAvailable in two types differing in depth.Side panels type A (shallow):- allow to open the door up to 270 degrees;- increase the cabinet width by 3 mm on each side.Side panels type B (deep):- provides sufficient mounting space in 600 mm wide cabinets; enables the installationof a power strip between the side panel and the 19" mounting profile;- increase the cabinet width by 11 mm on each side.For cabinetheightdepthCatalogue numberSide panelstypeRAL 7035RAL -06-161WZ-8477-09-06-161100042 U1200100045 U1200100047 U1200MaterialSheet steel powder paint,light grey (RAL 7035)or black (RAL 9005).Scope of deliverySide panel split horizontally,consisting of upper andlower part, together withfixing accessories. The lowerpart is equipped with twosliding locks.Package: 1 set (1 split side panel)Partition panelDesigned for mounting between bayed cabinets.It contains four 150 x 45 mm cable entries closed with knock-out blanking plates and four cutouts for cabinet frame connectors. The front and bottom edges of the partition panel, bent atan angle of 90 degrees, facilitate its installation between the frames of adjacent cabinets. Thedistance between the cabinets needed to install the partition panel is only 2 mm.The partition panel is available in two types differing in height:- partition panel type A for cabinets with feet;- partition panel type B for cabinets without feet.For cabinetheightdepth100042 U1200100045 U1200100047 U1200PartitionpaneltypeCatalogue numberRAL 7035RAL -06-161WZ-8477-35-12-161MaterialSheet steel powder paint,light grey (RAL 7035)or black (RAL 9005).Scope of deliveryPartition panel with fixingaccessories.Note: Cabinet frameconnectors are orderedseparately - see page 17.Package: 1 pc.FLOOR-STANDING CABINETS AND OPEN RACKSZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSZPAS 013

DATA COMMUNICATION SOLUTIONSZ-SERVER19"SERVER CABINETSACCESSORIESVertical masking panelsUpperhorizontalmasking panelVerticalmasking panelFor sealing the area between the 19" space and the cabinetside panel. The panels prevent the recirculation of hot air tothe front area of the cabinet, and increase the efficiency of airconditioning systems.In case of 800 mm wide cabinets the panels include openingsfor cable clamps mounting and 19" x 1U brush cable entries,to which, if necessary, 19" equipment can be installed insteadof brush.Vertical masking panels are mounted on 19" mounting profileswithout the use of tool.MaterialSheet steel powder paint, light grey (RAL 7035) or black(RAL 9005).Scope of deliverySet of two vertical masking panels with fixing accessories.19" x 1U opening for cable entryor 19" device assembly, factorycovered with a brush.Only available in masking panelsfor 800 mm wide cabinets.Openings for mounting cableclamps.Only available in masking panelsfor 800 mm wide cabinets.For cabinetheightCatalogue numberwidthRAL 7035600WZ-8477-36-01-01142 U800WZ-8477-36-04-011600WZ-8477-36-02-01145 U800WZ-8477-36-05-011600WZ-8477-36-03-01147 U800WZ-8477-36-06-011Package: 1 set (right and left masking panels)RAL 06-161Horizontal masking panelsVerticalmasking panelFor sealing the area between the 19" space and the top andbottom plate of the cabine. The panels prevent the recirculationof hot air to the front area of the cabinet, and increase theefficiency of air conditioning systems.Horizontal masking panels are attached to the vertical maskingpanels.Bottomhorizontalmasking panelMaterialSheet steel powder paint, light grey (RAL 7035) or black(RAL 9005).Scope of deliverySet of two horizontal masking panels with fixing accessories.For cabinetheightVertical and horizontal masking panels for 800 mm wide cabinets014 ZPASZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSCatalogue numberwidthRAL 8477-37-02-01145 U800WZ-8477-37-05-011600WZ-8477-37-03-01147 U800WZ-8477-37-06-011Package: 1 set (upper and lower masking panels)42 UFLOOR-STANDING CABINETS AND OPEN RACKSRAL 06-161

DATA COMMUNICATION SOLUTIONSSERVER CABINETSZ-SERVER19"ACCESSORIESBrush strip for the top plateBrush strip for attachment to a lateral edge of the upper plate after removingthe knock-out blanking plate (see drawings of the upper plates on page 12).MaterialBlack plastic.Scope of deliveryBrush strip.For cabinet depthCatalogue ckage: 1 pc.Z-SERVER cabinet top plate 800 x 1200 mmwith brush stripsVertical cable combFor 600 mm and 800 mm wide cabinets. To arrange cabling in the verticaldirection. Mounted on a 19" mounting profile without the use of tool.MaterialBlack plastic; sheet steel powder paint, light grey (RAL 7035) or black (RAL 9005).Scope of deliveryVertical cable comb with fixing accessories.For cabinet height42 U45 U47 UPackage: 1 pc.Catalogue numberRAL 7035RAL 03-161Vertical cable tray with coverFor 800 mm wide cabinets. For arranging high-density cabling in the verticaldirection. Mounted on a 19" mounting profile without the use of tools.MaterialBlack plastic; sheet steel powder paint, light grey (RAL 7035) or black (RAL 9005).Scope of deliveryVertical cable tray with cover and fixing accessories.For cabinet height42 U45 U47 UPackage: 1 pc.Catalogue numberRAL 7035RAL 03-161FLOOR-STANDING CABINETS AND OPEN RACKSVerticalcable combVertical cable traywith coverZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSZPAS 015

DATA COMMUNICATION SOLUTIONSZ-SERVER19"SERVER CABINETSACCESSORIES19" cable traysMounted between 19" mounting profiles.Available in 1U and 2U heighs.For a detailed description see page 72.T-SO-900-614MaterialBlack plastic.Scope of deliveryCable tray without fixing accessories.HeightCatalogue number1U2U1 U -618Package: 1 pc.T-SO-900-618Vertical and horizontal organizersIntended for:- arrangement of logical cabling,- arrangement of power supply cables,- mounting of power distribution strip and other accessories.The organizers are mounted on the cabinet frame.MaterialAl-Zn coated sheet steel.Scope of deliveryVertical or horizontal organizer with fixing accessories.Vertical organizerFor cabinetwidthheight80042 U45 U47 UCatalogue -03-000Package: 1 pc.Horizontal organizerFor cabinetwidthdepth600 or 80010001200Package: 1 pc.016 ZPASZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSFLOOR-STANDING CABINETS AND OPEN RACKSCatalogue numberWZ-8477-41-01-000WZ-8477-41-02-000

DATA COMMUNICATION SOLUTIONSSERVER CABINETSZ-SERVER19"ACCESSORIESCentral mounting profile type PREMIUMfor Z-SERVER cabinetsMounted to the upper and lower of mounting profiles withoutthe use of tool (see drawing on page 12).MaterialAl-Zn coated sheet steel.Scope of deliveryCentral mounting profile with fixing accessories.HeightCatalogue number42 U45 U47 00Package: 1 pc.Power strip bracketsIntended for vertical mounting ZPAS power strips (see page 90)onto mounting profiles or vertical arrangement pieces.Tool-free mounting.MaterialAl-Zn coated sheet steel.Scope of deliveryBottom and top bracket with fixing accessories.PackageCatalogue number1 setWZ-8477-48-00-000Cabinet connection setFor baying Z-SERVER cabinets in row.One set is intended for baying two cabinets.MaterialAl-Zn coated sheet steel.Scope of delivery4 cabinet frame connectors with fixing accessories.PackageCatalogue number1 setWZ-8477-51-01-000FLOOR-STANDING CABINETS AND OPEN RACKSZ-SERVER cabinetsDATA COMMUNICATION SOLUTIONSZPAS 017