Transcription
SRI SAIRAM ENGINEERING COLLEGEDEPARTMENT OF CIVIL ENGINEERINGDr. K. RAVISANKARName & PhotoDesignationPROFESSORQualificationB.E., M.E, Ph. DArea Of SpecializationSTRUCTURAL ENGINEERINGTeaching:UG: 2 YEARSExperiencePG:NILIndustry: 37 YEARSNumber Of Workshops/Conferences/ nal- 47PublicationInternational-53Conference:National & International- inReviewed many research/technical paperssubmitted to National/International Journalsand National/International Conferences
LISTOFPUBLICATIONSPapers published in International Journals:53Papers published in National Journals:47:113Papers published in Proceedings of International/National Conferences/SymposiaList of Papers published in International Journals:1. K.Kesavan, Ravisankar, K., R.Senthil, B.Arunsundaram and S.Parivallal, “FBG sensortechnology to interfacial strain measurement in CFRP strengthened concrete beam”,Experimental Techniques, Vol. 39, Issue 5, September/October 2015 pp 21-29 (IF 0.545)2.Parivallal, S., Ravisankar, K., Nagamani, K. and,Kesavan, K., ‘In situ Stress Assessment inConcrete Structures Under Bi-axial Condition by Trepanning Technique’, ExperimentalTechniques, Vol. 39, Issue 4, July/August 2015 pp 57-63 (IF 0.545)3. Ambily, P.S., Umarani, C., Ravisankar, K., Prabhat Ranjan Prem, Bharatkumar, B.H. andNagesh R.Iyer, ‘Studies on ultra-high-performance concrete incorporating copper slag as fineaggregate’, Construction and Building Materials, Vol.77, 2015, pp.233-240 (IF 2.265)4. Ambily, P.S., Ravisankar, K., Umarani, C. and Sundar Kumar, S., ‘Influence of micronizedbiomass silica on workability and strength of alkali activated slag concrete’, Journal ofScientific and Industrial Research, Vol.74, 2015, pp.98-101 (IF 0.759)5. Srinivas, V., Saptarshi Sasmal, Ramanjaneyulu, K. and Ravisankar, K., “Performanceevaluation of a stone masonry arch railway bridge under increased axle loads”, Internationaljournal of performance of constructed facilities, vol. 28, 2014, pp 363-375 (IF 0.576)6.Kesavan, K., Ravisankar, K., Senthil, R., Arun Sundaram, B. and Parivallal, S., ‘Studies onapparent strain using FBG strain sensors for different structural materials’, ExperimentalTechniques ,Vol.38, 2014, pp. 31-38 (IF 0.583)7. Kamatchi, P., Balaji Rao, K., Dhayalini, B., Saibabu, S., Privallal, S., Ravisankar, K., andNagesh R. Iyer, ‘Long-term prestress loss and camber of box-girder bridge’ ACI StructuralJournal, Vol.111, 2014, pp. 1297-1306 (IF 1.415)8. Aditya Kaushik, Arun Sundaram, B., Farvaze Ahmed, A.K., Parivallal, and Ravisankar, K.,‘Numerical Studies on damage loading vector approach for damage detection using staticload data’, Procedia engineering, Vol. 86, 2014, pp. 693-7009.Vimal Mohan, Parivallal, S., Kesavan, K., Arun Sundaram, B., Farvaze Ahmed, A.K., andRavisankar, K., ‘Studied on damage detection using frequency change correlation approachfor health assessment’, Procedia Engineering, Vol. 86, 2014, pp. 503-51010. Sharon Ann Mathew, Saravanakumar, P., Parivallal, S., Kesavan, k., and Ravisankar, K.,‘Elemental model strain energy for damage identification of a space frame: A numerical
approach’ Intl. Journal of Applied Engineering Research, Vol. 9, 2014, pp. 3723-373111. Kesavan, K., Ravisankar, K., Senthil, R., and Parivallal, S., ‘Fiber Bragg Grating sensors formonitoring corrosion of reinforcement in concrete structures’, ChemXpress- An Intl. Journal,Vol.5,2014, pp.75-8212. Jansher Sadik, Farvaze Ahmed, A.K., Ravisankar, K., Parivallal, S., and Shanthi, S., ‘Studyon stress field of a plan and RC slab with a slot by finite element approach’, Intl. Journal ofEmerging Technology and Advanced Engineering, VOL.4, 2014, PP.94-10113. Kesavan, K., Ravisankar, K., Senthil, R., and Farvaze Ahmed, A.K., “Experimental studieson performance of reinforced concrete beam strengthened with CFRP under cyclic loadingusing FBG array”, Measurement, An International Journal, Vol.46,Issue10, 2013, pp. 3855–3862. [IF: 1.130]14. Ambily, P.S., Ravisankar, K., Umarani, C., Dattatreya, J.K. and Nagesh R.Iyer, ‘Developmentof ultra-high-performance geopolymer concrete’, Magazine of Concrete Research, Vol.66,2013, pp.82-89 [IF 0.563]15. Kesavan, K., Ravisankar, K., Senthil, R., Arunsundaram, B. and Parivallal, S., “Studies onapparent strain using FBG strain sensors for different structural materials”, Journal ofExperimental Techniques, USA, Available online. [IF: 0.378]16. Kesavan, K., Ravisankar, K., Senthil, R., Arunsundaram, B., and Parivallal, S., “FBG sensortechnology to interfacial strain measurement in CFRP strengthened concrete beam”, Journalof Experimental Techniques, USA, Available online.[IF: 0.378]17. Parivallal, S., Ravisankar, K., Nagamani, K. and Kesavan, K., “In situ Stress Assessment inConcrete Structures Under Bi-axial Condition by Trepanning Technique”, Journal ofExperimental Techniques, USA, Available online. [IF: 0.378]18. Srinivas, V., Sasmal, S., Ramanjaneyulu, K., and Ravisankar, K., “Performance Evaluation ofStone Masonry Arch Railway Bridge under Increased Axle Loads”, ASCE Journal ofperformance of constructed facilities, USA, 2013. [IF: 0.576]19. Devandiran, P., Kamatchi, P., Balaji Rao, K., Ravisankar, K., and Nagesh R. Iyer,“Probabilistic analysis of spectral displacement by NSA and NDA”, Earthquakes andStructures, An International Journal, Vol. 5, No. 4, 2013, pp 439-459. [IF:1.381]20. Arunsundaram, B., Parivallal, S., Farvaze Ahmed, A.K., Kesavan, K., Ravisankar, K. andSenthil, R., “Structural health monitoring using wireless sensor networks”, InternationalJournal of Scientific and Engineering Research, Vol. 4, Issue 8,August 2013. [IF: 1.4]21. Farvaze Ahmed, A.K., Ravisankar, K., Arunsundaram, B., Parivallal, S. and Kesavan, K.,“Studies on calibration factor of flat-jack for measuring in-situ stress on concrete members”,International Journal of Scientific and Engineering Research, Vol. 4, Issue 8, August 2013.[IF: 1.4]22. Balaji Rao, K., Anoop, M.B., Kesavan, K., Balasubramanian, S.R., Ravisankar, K. and NageshR. Iyer, “Modelling of strains in reinforced concrete flexural members using alpha-stable
distribution”, Computers and Concrete, Vol. 11, No. 5, May 2013, pp 411-440. [IF: 1.015]23. Ravisankar, K., Kesavan, K., Parivallal, S., ArunSundaram, B. and Ahmed, A.K.F. “Fibreoptic sensors as a non-destructive tool for structural monitoring”, International Journal ofForensic Engineering, Vol. 1, Nos. 3/4, 2013, pp. 260–276.24. Srinivasan, P., Ravisankar, K. and Thirugnanasambandam “Forensic evaluation of a largereinforced concrete specimen using radar and ultrasonic pulse echo”, International Journalof Forensic Engineering, Vol. 1, Nos. 3/4, 2013, pp. 198-208.25. Srinivas, V., Ramanjaneyulu, K., Saravana Kumar, K., Parivallal, S., Kesavan, K.,Ravisankar, K., Lakshmanan, N. and Nagesh R. Iyer “Evaluation of Longitudinal Force on aRailway Bridge Based on Strain Measurements”, Journal of Experimental Techniques,Society of Experimental Mechanics, USA, Vol. 37, No.1, Jan.-Feb. 2013, pp. 55-67. [IF: 0.378]26. Deshraj Trivedi, Koravangatt Devi, Ilya Buynevich, Srinivasan, P., Ravisankar, K., VipulSilwal, Sengupta, D., Rajesh R. Nair, “Interpretation of dune genesis from sedimentogicaldata and ground penetrating radar (GPR) signatures: A case study from Ashirmata dunefield, Mandvi beach, Gujarat, India”, International Journal of Geosciences, Vol.3, 2012, pp.772-779. [IF: 0.26]27. Lakshmanan, N., Ravisankar, K., Muthumani, K., Krishnamoorthy, T.S., Ramanjaneyulu, K.,Gopalakrishnan, N., and Nagesh R Iyer “Management and Maintenance Scheduling ofInfrastructural Facilities: Road Map”, ASCE Journal of Performance of Constructed Facilities,Vol. 26, No.6, Nov/Dec., 2012, pp. 835 – 848.28. Parivallal, S., Kesavan, K., ArunSundaram, B., Farvaze Ahmed, A.K. andRavisankar,K. “Structural health monitoring of a prestressed concrete bridge with recent advancementsin measurement technology”, International Journal of COMADEM, 15(3), July 2012, pp. 3946.29. Ramesh kumar, V., Bhuvaneshwari, B., Maheswaran, S., Palani,, G.S., Ravisankar, K. andNagesh R. Iyer “An overview of techniques based on biomimetics for sustainabledevelopment of concrete”,Current Science, Vol.101, No.6, 2011, pp. 741-747.[IF: 0.897]30. Arun Sundaram, B., Kesavan, K., Parivallal, S., and Ravisankar, K., “Techniques forinstrumentation and measurement of interfacial strains in FRP strengthened concretestructures using FBG sensors” International Journal of Experimental Techniques, USA, Vol.35, No.4, July - August 2011, pp. 35 – 38. [IF: 0.26]31. Arunsundaram, B., Kesavan, K., Parivallal, S., Farvaze Ahmed, A.K., andRavisankar,K., “Monitoring of FRP strengthened concrete structures using FBG sensors” InternationalJournal of Procedia Engineering, U.K., Vol. 14, 2011, pp. 1549 – 1556.32. Kesavan, K., Arun Sundaram, B., Parivallal S., Farvez Ahemed, A.K., Biswas, P.,Bandyopadhyay, S., Ravisankar, K. and Dasgupta, K., “Studies on packaged fibre bragggrating sensor for health monitoring of concrete structures”, International Journal ofCOMADEM, Vol.14, Issue 4, October 2011, pp. 22-29.33. Parivallal, S., Ravisankar, K., Nagamani, K. and Kesavan, K., “Core drilling technique for in-
situ stress evaluation in concrete structures”, Journal of Experimental Techniques, Society ofExperimental Mechanics, USA, Vol. 35, No.4, July-August 2011, pp.29-34. [IF: 0.26]34. Balaji Rao, K., Anoop, M.B., Sreeshylam, P., Sridhar, S., Kesavan, K. andRavisankar, K.,“Assessment of pre-stress losses in instrumented pre-stressed concrete beams usingstochastic analysis”, Strain, Vol.47, June 2011, pp 175-188. [IF: 1.103]35. Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P., and S. Sridhar, “Experimentalstudies on fiber optic sensors embedded in concrete”, Measurement,Vol 43, Issue 2,February 2010, pp 157-163. [IF: 1.13]36. Biswas, P., Bandyopadhyay, S., Kesavan, K., Parivallal, S., B. Arun Sundaram, Ravisankar,K. and Dasgupta, K., “Investigation on packages of fiber Bragg grating for use asembeddable strain sensor in concrete structure”, Sensors and Actuators A: Physical, Volume157, Issue 1, January 2010, pp 77-83. [IF: 1.933]37. Umesh Tiwari, Vandana Mishra, Subhash C. Jain, Kesavan, K., Ravisankar,K., Nahar Singh,Poddar,G. C. and Pawan Kapur, “Health monitoring of steel and concrete structures usingfibre Bragg grating sensors”, Current science, Vol. 97, No. 11, December 2009, pp. 1539 –1542. [IF: 0.782]38. Sridhar, S., Ravisankar, K., Sreeshylam, P., Parivallal, S., Kesavan, K. and Murthy, S. G. N.,“Development of a Real-time Remote Structural Monitoring Scheme for Civil InfrastructuralSystems” (SHM)Structural Health Monitoring, Vol 8, No 6, November 2009, pp. 509-521.[IF:1.544]39. Sreeshylam, P., Ravisankar, K., Parivallal, S., Kesavan, K. and Sridhar, S., “Conidtionmonitoring of prestressed concrete structures using vibratiung wire sensors”, InternationalJournal of COMADEM (Condition Monitoring and Diagnostic Engineering Management),Vol. 11, No.3, July 2008, pp. 46-54.40. Sridhar, S., Ravisankar, K., Sreeshylam, P., Parivallal, S., Kesavan, K. and Murthy, S.G.N.,“Remote structural health monitoring of civil infrastructures-recent trends”, InternationalJournal of COMADEM, Vol. 11, No.1, January 2008, pp. 25-35.41. Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P and Sridhar, S., “Assessment ofLong-term Performance of EFPI Fiber Optic Sensors”, International Journal of COMADEM,Vol.10, No.1, January 2007, pp. 37-42.42. Kesavan, K., Ravisankar, K., Parivallal, S. and Sreeshylam, P., “Applications of fiber opticsensors for structural health monitoring”, Smart Structures and Systems, An InternationalJournal, Vol.1, No.4, October / December 2005, pp. 355-368. [IF: 1.23]43. Kesavan, K., Ravisankar, K., Parivallal, S. and Sreeshylam, P, “Technique to assess theresidual prestress in prestressed concrete members”, Experimental Techniques, SEM, USA,Vol. 29, No.5, September/October 2005, pp. 17-21. [IF: 0.363]44. Kesavan, K., Ravisankar, K., Parivallal, S. and Sreeshylam, P, “Non- destructive evaluationof residual stresses in welded plates using Barkhausen noise technique”, Experimental
Techniques, SEM, USA, Vol.29 , No.5, September/October 2005,pp. 33-38. [IF: 0.363]45. Parivallal, S., Narayanan, T., Ravisankar, K., Kesavan, K. and Maji, S., “Instrumentation andresponse measurement of a double-lane Bailey Bridge during load test”, Journal of Strain,UK, Vol. 41, No.1, February 2005, pp.25-30. [IF: 0.465]46. Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P. and Narayanan, T., “A techniquefor embedding EFPI fiber optic strain sensors in concrete”, Experimental Techniques, SEM,USA, Vol. 28, No.4,July/August 2004, pp.31-33 [IF: 0.312]47. Kesavan, K., Ravisankar, K., Narayanan, T., Parivallal, S. and Sreeshylam, P., “Temperaturecalibration of EFPI fiber optic strain sensors”, Experimental Techniques, SEM, USA, Vol. 28,No.1, January/February 2004, pp.31-33. [IF: 0.312]48. Kesavan, K., Ravisankar, K., Narayanan, T., Parivallal, S., Sreeshylam, P. and AravindanP.K., “Temperature calibration of fiber optic strain sensor for structural health monitoring”,Smart Materials, Structures and Systems, SPIE, Vol.5062, USA, Oct 2003, pp. 677-683.49. Kesavan, K., Ravisankar,K., Narayanan,T., Parivallal, S. and Narayanan, R., “Generation ofapparent strain calibration curves for structural materials at elevated temperature”,Experimental Techniques, SEM, USA, Vol.23, No.6, Nov-Dec.1999,pp. 39-41.50. Khadakkar, A.G., Ravisankar, K., Rathinam, P., Nayarayanan, R., Rao, S.P. and Popli, J.K.,“Case study of safe lowering of an in-service gas pipeline”, Journal of Strain, UK, Vol. 33,No. 2, May 1997, pp.57-60.51. ham,R.andJayakar,B.,“Evaluation of residual stress in valve discs due to stellite deposition”, ExperimentalTechniques, SEM, USA, Vol. 16, No.5, Sept/Oct.1992, pp. 30-32.52. Khadakkar, A.G., Narayanan,R., Ravisankar,K., Nagesh ,R., Iyer and Appa Rao, T.V.S.R.,“Free vibration of cylindrical shells by holographic interferometry”, Journal of Sound andVibration, 121 (1),February 1988, pp. 169-180.53. Jayarama Rao, G., Ravisankar, K., and Narayanan, R., “Determination of calibrationconstants for hole drilling technique using special strain gage rosette”, Journal of Testingand Evaluation, ASTM, Vol.14.No.4, July1986, pp. 207-212.List of Papers published in National Journals:1.Kesavan, K., ArunSundaram, B., Farvaze Ahmed, A.K., Parivallal, S., Biswas, P.,Bandyopadhyay, S., Ravisankar, K., Umesh Tiwari, “Performance assessment ofindigenously developed FBG strain sensors under short-term and long-term loadings”,Sadhana: Vol.40, No.2, 2015, pp.577-590 (IF 0.587)2.ArunSundaram, B., Parivallal, S., Kesavan, K., Farvaze Ahmed, A.K., Ravisankar, K.,Ramanjaneyulu, K. and Nagesh R. Iyer, "Condition assessment of a prestressed concretegirder and slab bridge for increased axle loadings", Journal of Scientific and IndustrialResearch,Vol.74,November2015,pp634-640
3.Kamatchi, P., Dhayalini, B., Balaji Rao, K., Saibabu, S., Parivallal, S., Ravisankar, K., andNagesh R. Iyer., “Estimation of long-term prestress losses of box-girder bridge span usingthe prestress loss models in Indian and international codes of practices and comparisonwith field measurements”, The Indian Concrete Journal, Vol. 89, No.5, May 2015, pp.59-684.Parivallal, S., Ravisankar, K., Kesavan, K. and ArunSundaram, B., "Evaluation of in-situstress in concrete structures by core trepanning technique", The Bridge and StructuralEngineer, Journal of the Indian National Group of the International Association for Bridgeand Structural Engineering, Vol.45, No.2, June 20155.ArunSundaram, B., Parivallal, S., Kesavan, K., Farvaze Ahmed, A.K., Vimal Mohan andRavisanakar, K., “ Development of wireless sensor system for condition assessment of civilinfrastructures”, International journal of civil engineering, Vol.1, No.1, January-June 2015,pp 92-1036.Bharath Kumar, P., Kesaven, K., Parivallal, S., Ravisankar, K., Sakthieswaran, N.,“Monitoring of Corrosion in RC Structures Using FBG Sensor”, International Journal ofInnovative Research in Science, Engineering and Technology, Vol. 4, Special Issue 6, May2015, pp 2192-22007.ArunSundaram, B., Ravisankar, K., Senthil, R. and Parivallal, S., “Wireless sensors forstructural health monitoring and damage detection-An overview”, The Masterbuilder,Vol.17, No. 5, May 2015, pp 154-1628.Narmadha Devi R., Kesavan, K., Parivallal, S., Ravisankar, K., and Ranjitham, M., “Studieson packaged embeddable FBG array sensor for structural health monitoring”, MULTICON15, April 20159.Ambily, P.S., Ravisankar, K., Umarani, C. and Sundar Kumar, S., ‘Influence of micronizedbiomass silica on workability and strength of alkali activated slag concrete’, Journal ofScientific and Industrial Research, Vol. 74, 2015, pp. 98-101 (IF 0.5)10. Kamatchi, P., Dhayalini, B., Balaji Rao, K., Saibabu, S., Parivallal, S., Ravisankar, S., andNagesh R. Iyer, ‘Estimation of long-term prestress losses of box-girder bridge span using theprestress loss models in Indian and International codes of practices and comparison withfield measurements’, Indian Concrete Journal, Vol. 89, 2015, pp. 59-6811. Kesavan, K., Arun Sundaram, B., Farvaze Ahmed, A.K., Parivallal, S., Biswas, P.,Bandyopadhyay, S., Ravisankar, K. and Umesh Tiwari, ‘Performance assessment ofindigenously developed FBG strain sensors under short-term and long-term loading’,Sadhana, Vol.40, 2015, pp. 577-590 (IF 0.587)12. Arunsundaram, B., Ravisankar, K., Senthil, R., and Parivallal, S., “Wireless sensors forstructural health monitoring and damage detection techniques”, Current Science, Vol.104,No. 11, June 2013, pp 1496-1505. [IF: 0.935]13. Bhaskar S., Srinivasan P., Murthy S.G.N., Nagesh R. Iyer and Ravinsankar, K. “Evaluationof thickness and defects in concrete using impact-techno technique”, The Indian ConcreteJournal, January Vol. 87(1), 2013, pp. 19-27.14. Srinivasan, P., Ravisankar, K. and Thirugnanasambandam, S. “Non-Destructive Evaluationof Concrete Structures with Ground Penetrating Radar and Influencing Parameters”, IUP
Journal of Structural Engineering, Vol. V, No.4, October 2012, pp. 43-52.15. Srinivasan, P., Ravisankar, K., & Thirugnanasambandam, S., “Identification ofreinforcement and voids in concrete structures using ground penetrating radar”, Journal ofStructural Engineering, Vol. 38, No. 6, March 2012, pp. 589-595.16. Ramesh Kumar, V., Bhuvaneshwari, B., Maheswaran, S., Palani, G.S., Ravisankar, K. andNagesh R.Iyer,’An overview of techniques based on biomimetics for sustainabledevelopment of concrete’, Journal of current science, vol 101, 2011, pp 741-74717. Anoop, M.B., Balaji Rao, K., Raghuprasad, B.K., Ravisankar, K. and Nagesh R.Iyer, “Changepoint detection in corrosion health monitoring using statistical techniques”, Jounral ofStructural Engineering, Vol.37, No.3, April-May 2010, pp. 66-7418. Ramesh Kumar, V., Maheswaran, S., Palani, G.S., Ravisankar, K. and Nagesh R Iyer,“Innovative construction materials for sustainable development based biomimatics”,Journal of Indian Building Congress, Vol. XVII, No.2, June 2010, pp. 1-719. Sridharan,N., Kesavan, K., Parivallal, S.and Ravisankar, K., “Hybrid technique combiningphotoelasticity and boundary element method for stress analysis”, Journal of StructuralEngineering, Vol. 36, No.4, October 2009, pp. 287-29120. Sridharan,N., Kesavan, K., Parivallal, S.and Ravisankar, K., “Application of strain gagetechnique for fiber reinforced composite materials”, Journal of Instrument Society of India,Vol. 39, No.2, June 2009, pp. 67-7021. Srinivasan, P., Bhaskar, S., Parivallal, S., Kesavan, K., Ravisankar, K. and Venugopal, G.,“Condition assessment of corrosion damaged approach jetty exposed marine environment –A case study”, Journal of Structural Engineering, Vol.36, No.1,April - May 2009, pp.16-2122. Bhaskar, S., Wiggenhauser, H., Srinivasan, P., Murthy, S. G. N., Ravisankar, K., NageshIyer, R. and Lakshmanan, L., “Detection of internal flaws in structural concrete elements byImpact-Echo technique”, Journal of Structural Engineering, Vol.36, No.1, April - May 2009,pp. 7-1023. Kesavan, K., Ravisankar, K., Parivallal, S. & Sridhar, S., “fibre Bragg Grating (FBG) sensorsfor health monitoring of civil engineering structures – An Overview”, Journal of NonDestructive Testing and Evaluation, Vol.6, No.3, December 2007, pp. 9-21.24. Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P. and Sridhar, S., “Strainmeasurement at elevated temperature using electrical resistance strain gages”, Journal ofInstrument Society of India, Volo.37, No.4, December 2007, pp. 289-28625. Ravisankar, K., Kesavan, K., Parivallal, S., Sreeshylam, P and Sridhar, S., “Structural HealthMonitoring of Concrete Structures”, The Master Builder, Vol.8, No. 11, December 2006, pp.74-78.26. Sreeshylam, P., Ravisankar, K., Parivallal, S., Kesavan, K. and Sridhar, S., 'Measured longterm prestress losses versus design code estimates', Journal of Structural Engineering,
Vol.32, No.1, April/May 2005, pp. 37-44.27. Parivallal, S., Ravisankar, K., Narayanan, T., Kesavan, K. and Sreeshylam, P., “Fibre opticsensors for health monitoring of civil engineering structures”, Journal of StructuralEngineering, Vol: 31, No: 1, April-June 2004, pp. 9-14.28. Ravisankar, K. and Narayanan, T., “Structural health monitoring of civil engineeringstructures- A critical review”, Institute of Smart Structures and Systems (ISSS), December2002, pp. 60-8529. Ravisankar, K., Narayanan, T., Kesavan, K., Parivallal, S. and Narayanan, R.,“Instrumentation and response measurement of aircraft landing gears during strength test”,Journal of the Aeronautical Society of India, Vol.54, No.4, November 2002,pp. 383-388.30. Ravisankar, K., Parivallal, S., Narayanan, T., Kesavan, K. and Narayanan, R., “Vibratingwire strain gauges for long-term monitoring of structures”, The Indian Concrete Journal,Vol.75, No.8, August 2001, pp. 535-541.31. Ravisankar, K., Ifju, P.G., Narayanan, R. and Baskaran, P., “Evaluation of elasto-plasticstresses on a strain hardening material using Moire Interferometry”, Journal of Optics,Vol.29, No.1, 2000, pp. 35-47 (Award of Certificate of Special Mention given to this paper)32. Ravisankar, K., Narayanan, R., Baskaran, P. and Narayanan, T., “Evaluation of elastoplastic stresses using Birefringent coating technique”, Journal of Optics, Vol. 26, No.3, 199933. Ravisankar,K., Narasimhan,K., Narayanan,R. and Khadakkar,A.G., “Development ofspecial fixtures for blind –hole-drilling and use of mobile instrumentation for fieldmeasurements”, The Institution of Engineers (I), Journal-MC, Vol.: 79, May 1998 (Award ofCertificate of Special Mention given to this paper)34. Ravisankar, K., Narayanan, R., Baskaran, P. and Narayanan, T., “Evaluation of elastoplastic stresses using Birefringent coating technique”, Journal of Optics Vol. .26, No.3, 1997,pp.105-115 ( Award of certificate of Special Mention given to this paper)35. Ravisankar, K., Narayanan, T. and Narayanan, R., “Flexible water-proofing techniques forprotection of strain gages”, Journal of the Institution of Engineers (I), Vol.77, 199636. n,N.,JayaramaRao,G.andMehta,P.K., “Experimental and theoretical analysis of Launcher structure”, Journal of theInstitution of Engineers (I),Vol.75,199537. Narayanan,T., Ravisankar,K., Narayanan,R., and Maheswaran,V., “Instrumentation of afibre yarn twisting machine”, Journal of the Instrument Society of India, Vol.24, No.1 &2,199438. Narayanan,T., Ravisankar,K. and Narayanan,R., “Assessment of structural behaviour of aship during load-out experiment”, Journal of the Institution of Engineers (I), Vol.72,Nov.1991. (Award of certificate of merit given to this paper)39. Ravisankar,K., Narayanan,T., and Narayanan,R., “Residual stresses in steel castings and
their evaluation”, Journal of Structural Engineering, Vol.16. No.4, January1990, pp.109-114.40. Narayanan,T., Ravisankar,K., Nararyanan,R., Jayarama Rao,G., Khadakkar,A.G. andJayakar,B., “Experimental analysis of stiffened gate valves”, Journal of the Institution ofEngineers (I), Mech. Engg.Div., Vol.70, No. 1, May 1989, pp. 7-1141. Ravisankar, K., Narayanan, R., Jayarama Rao, G and Appa Rao, T.V.S.R., “Residual stress inindian standard rolled steel I-sections”, Journal of Structural Engineering, Vol.12, No.1,April 1985, pp. 21-27.42. Narayanan. T. Ravisankar, K. and Nararyanan, R., “Casting of complicated photo-elasticmodels using silicon rubber moulds”, Journal of Structural Engineering, Vol.12, No.1, April1985, pp. 39-42.43. Narayanan,R., Khadakkar,A.G. and Ravisankar,K., “Stresses in thin films by opticaltechniques”, Journal of Optics, Vol.14, No.2, April-June 198544. Khadakkar,A.G., Ravisankar,K. and Appa Rao, T.V.S.R., “Three dimensional photo-elasticinvestigation of jaws of bridge superstructure”, Journal of Structural Engineering, Vol.11,No.4,January 1985, pp.105-11345. Ravisankar,K., Narayanan,T. and Narayanan,R., “Precise measurement of surfacetemperature using strain gage type sensors”, Indian Planner and Builder, Vol.4, No.10,December 198446. Jayarama Rao,G., Khadakkar, A.G., Narayanan,R., Ravisankar,K. and Appa Rao,T.V.S.R.,“An optical system to increase the sensitivity of Moire analysis of strain”, Journal of Optics,Vol.11, No.3, 198247. Ravisankar,K. and Jayagopal, L.S., “Buckling and post buckling strength of thin reinforcedconcrete wall panels”, Journal of Graduate Students, PSG Tech. Campus, Coimbatore, 1978List of Papers Published in the Proceedings of the chi, P., Rama Raju, K., Ravisankar, K. and Nagesh R. Iyer, ‘Design of viscoelasticdampers for RC frame for site-specific earthquake’, Advances in Structural Engineering, Ed.V. Matsagar, Springer India, New Delhi, 2015, pp. 3827-38382.Sundar Kumar, S., Ravisankar, K., Pazhani, K.C., Sheethal, K.T. and Prema Kumar, W.P., ‘Astudy on the behaviour of steel fibre reinforced geopolymer concrete’, Proc. Of the 5th Intl.Congress on Computational Mechanics and Simulation, Chennai, December 2014, pp.111411183.Ravisankar, K., and Farvaze Ahmed, A.K., ‘Condition assessment of an in-serviceprestressed concrete bridge by model updating based on experimental investigation’, Proc.Of the 5th Intl. Congress on Computational Mechanics and Simulation, Chennai, Dec 2014,pp.259-2724.Parivallal, S., Ravisankar, K., Kesavan, K. and Nagamani, K., ‘Numerical studies on in-situstress evaluation in concrete structural elements under biaxial condition by trepanning
technique’, Proc. of the 5th Intl. Congress on Computational Mechanics and Simulation,Chennai, December 2014, pp. 684-6935.Lalanthi, M.C., Kamatchi, P., Balaji Rao, K.B., Parivallal, S., Ravisankar, K. and Nagesh R.Iyer, ‘Evaluation of long-term deflection of PSC beam using FE model’, Proc. of the 5th Intl.Congress on Computational Mechanics and Simulation, Chennai, December 2014, pp. 9869936.Prema, S., Vimal Mohan, Parivallal, S., Ravisankar, K., and Robert Ravi, S., ‘Correlationbased damage detection for structural health assessment’, Intl, Conference on Advances inCivil and Chemistry of Innovative Materials, Chennai, March 2014, pp. 99-1057.Sharon Ann Mathew., Parivallal, S., Ravisankar, K., Kesavan, K., and Saravanakumar, P.,‘Recent trends in structural health monitoring and damage detection of civil infrastructureAn overview’, Intl, Conference on Advances in Civil and Chemistry of Innovative Materials,Chennai, March 2014, pp. 241-2468.Janasher Sadik, Farvaze Ahmed, A.K., Ravisankar, K., Parivallal, S., and Dinesh Kumar, P.,‘Study on stress field of a plain and RC slab with slot by finite element approach’, Intl.Conference on Advances in Civil and Chemistry of Innovative Materials, Chennai, March2014, pp. 615-6259.Sivapriya, S., Kesavan, K., Ravisankar, K., Parivallal, S., and Metro, M.M., ‘Studies onembeddable type packaged strain-temperature FBG sensor for concrete structures’, Intl.Conference in Civil and Chemistry of Innovative Materials, Chennai, March 2014, pp. 63664210. Deepan, N., Farvaze Ahmed, A.K., Ravisankar, K., Parivallal, S., and Dinesh Kumar, P.,‘Influence of concrete strength in evaluating in-situ stress in concrete members using finiteelement approach’, Proc. Of the National Conference Innovations in Mechanical,Mechatronics and Building Sciences, Erode, March 2014, pp. 21-2811. Vimal Mohan, Parivallal, S., Kesavan, K., Arun Sundaram, B., Farvaze Ahmed, A.K., andRavisankar, K., ‘Studied on damage detection using frequency change correlation approachfor health assessment’, Intl. Conference on Structural Integrity, Kalpakkam, February 2014,pp. 21-2812. Aditya Kaushik, Arun Sundaram, B., Farvaze Ahmed, A.K., Parivallal, and Ravisankar, K.,‘Numerical Studies on damage loading vector approach for damage detection using staticload data’, Intl. Conference on Structural Integrity, Kalpakkam, February2014, pp. 1080-108713. Cinitha, A., Umesha, P.K., Kesavan, K., and Ravisankar, K., “Fiber bragg grating sensors inmonitor corrosion of structural steel’, Proc. Of the Intl. Corrosion Conference and expoCORCON2013, New Delhi, October 2013 (in CD format)14. Mohamed Meeran, A., Parivallal, S., ArunSundaram, B., Ravisankar, K. and Prabravathy,S., “Experimental Investigations on a Steel Plate Girder Bridge using Wireless Sensors”,proceedings of the International Conference on Futuristic Innovations and Developments inCivil Engineering (ICFIDCE 13), organized by Department of Civil Engineering,MepcoSchlenk Engineering College, Sivakasi, Tamilnadu, during April 2013, pp 307-310.15. Farvaze Ahmed, A.K., Ravisankar, K., ArunSundaram, B., Parivallal, S. and Kesavan, K.,“Studies on calibration factor of flatjack for measuring in-situ stress on concrete members”,
Proceedings of the third international conference on Global Innovations in
Na gesh R.Iyer, ¶Stu dies on ult ra -high-p er formance co nc re te inc orpo ra ting copp er slag as fine agg re gate ·, Constructi on and Bu ilding Materials, Vol.77, 2015, p p. 233-240 (IF 2.265) . K. Structural h ea lth monit or ing of a pre stre ss ed conc re te brid ge wi th recent advanceme nt s in me asu re ment technology µ, Int .
