WIXLIB

1002476811302871349302871341INSTALLATION AND CARE GUIDEMANDOURI 8 IN. WIDESPREAD 2-HANDLELED HIGH-ARC BATHROOM FAUCETQuestions, problems, missing parts?Before returning to the store, call Glacier Bay Customer Service8 a.m. - 7 p.m., EST, Monday - Friday9 a.m. - 6 p.m., EST, Saturday1-855-HD-GLACIER (1-855-434-5224)HOMEDEPOT.COM/GLACIERBAYTHANK YOUfaucet. We strive to continually create quality products designed to enhance your home. Visit us online to seeour full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!THD8/2019 REV.02

Table of ContentsImportant Information .2Warranty .2Pre-Installation .2Planning Installation .2Tools and Hardware Required .2Package Contents .3Installation .4Operation.9Care and Cleaning .10Troubleshooting .10Service Parts .11Important Information Observe all local plumbing and building codes. Cover the sink drain to avoid losing any parts. Review the care and cleaning section included in this guide.WarrantyLIMITED LIFETIME WARRANTYGlacier Bay products are manufactured with superior quality standards and workmanship and are backed by ourlimited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free ofdefects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-4345224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumerpurchaser must be made available for all Glacier Bay warranty claims.This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear andtear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extendeda five year limited warranty from the date of purchase, with all other terms of this warranty applying except theduration of warranty.Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so theabove limitations may not apply to you. This warranty gives you specific legal rights and you may also have otherrights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER formore details.Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.Pre-InstallationPLANNING INSTALLATIONBefore beginning the installation of this product, ensure all parts are present. Compare parts with the PackageContents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Servicefor replacement ewrenchONETOOLS AND HARDWARE REQUIREDSiliconesealantChannellock pliersHacksaw2(2) SupplylinesPhillipsscrewdriver

Pre-Installation (continued)PACKAGE CONTENTSClickInstall Drain AssemblyFaucet AssemblyBSAJ*QCGK*DEFHRL*M*PON*INOTE: *Items J - N come pre-assembled.PartDescriptionQuantityAFaucet body1BHandle assembly- Hot1CHandle assembly- Cold1DWasher2ENut2FScrew4GWasher2HLock nut1IQuick connect hosePartJDescriptionPop up stopperK13Quantity11LRubber washer1MLock nut1NDrain body1OJoint1PHorizontal rod1QLift rod strap1RClip1SLift rod1HOMEDEPOT.COM/GLACIERBAYPlease contact 1-855-HD-GLACIER for further assistance.

Installation1 Installing the faucet assembly 2 Installing the faucet handlesCAUTION: Always shut off the water supply beforeremoving an existing faucet or replacing any part of afaucet. Open the faucet handle to relieve water pressureand ensure that the water is completely shut off. Remove the preassembled nuts (E) and washers(D) from the hot and cold faucet handles (B and C). Loosen the screws (F) on the nuts (E) until theends of the screws (F) athe nuts (E). Insert the hot faucet handle (B) to the left of thespout and cold faucet handle (C) to the right ofthe spout. Attach the faucet handles (B and C) underneaththe sink using the washers (D) and nuts (E).Securely tighten the screws (F) on the nuts (E).NOTE: Ensure that the hole for the lift rod faces towardthe rear of the sink during installation. When you insert thelift rod (S), the lift rod (S) can go through the faucet (A) anddown into the slot of the washers (G).E1 Shut off the water supply. Remove the oldfaucet.Clean the mounting surface.Remove the preassembled lock nut (H) andwashers (G) from the new faucet (A).Place the faucet (A) through the mountingholes in the sink.Secure the faucet (A) to the sink using thewashers (G) and lock nut (H) provided.F1 NOTE:kBacAntFroThe holefor liftrod1B22C4E443AHD23EFH4F3F5DGE

Installation (continued)3 Preparing the pop-up assembly 4 Installing the drain bodyRemove the pop-up stopper (J) and drainflange (K) from the drain body (N). Apply silicone sealant (not included) under thedrain flange (K) and place the drain flange (K)into the drain hole of the sink. From underneath the sink, screw the drainbody (N) onto the drain flange (K). Ensure thatthe opening (1) for the ball rod on the drainbody (N) faces towards the rear of the sink. Tighten the rubber washer (L) and lock nut (M)on the drain body (N). Hand-tighten only.JSILIKK2 1LM1NN5HOMEDEPOT.COM/GLACIERBAYPlease contact 1-855-HD-GLACIER for further assistance.

Installation (continued)the stopper and5 Installinghorizontal rod Before installation, unscrew the protective cap(1) from the horizontal rod (P). Insert the stopper (J) into the drain hole in thesink. Insert the horizontal rod (P) into the drain body(N) and through the hole of the stopper (J) untilyou hear a click. See insert 2. You can press thetwo sides of the joint (O) to remove the horizontalrod (P).6 Installing the lift rod Slide the lift rod (S) down into the lift rodstrap (Q) through the faucet (A) until it clicksinto the lift rod strap (Q).NOTE: If a shorter lift rod (S) is required for yourinstallation, you may call Glacier Bay Customer Servicefor assistance.SNOTE: For easier removal and cleaning, rotate the stopper(J) 90 degrees so that the horizontal rod (P) does not gothrough the hole in the stopper (J). See insert 3.AJ112PN1SInsert 22SInsert 3Q3QPONO6

Installation (continued)7 Attaching the horizontal rod and strap Press the horizontal rod (P) down to ensure the stopper (J) is in the maximum open position. Slide the clip (R) upward, adjust the location of the lift rod strap (Q) to the appropriate height and insertthe horizontal rod (P) with the correct hole of the lift rod strap (Q). Move the lift rod strap (Q) in or out to choose an appropriate location. Slide the clip (R) downward until it secures with the horizontal rod (P).JJJQRQRRP441Q233RPHole5P8 Adjusting the length of lift rod strap (optional) If the pop up lift rod strap (Q) is interfering with your installation, as shown in Fig. 1, the lift rod strap (Q)can be cut shorter. Once you have identified the proper hole in the lift rod strap (Q) that is necessary for your installation, youmay cut off the bottom portion (1) of the lift rod strap (Q) by snapping it off with pliers or cutting it off witha saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (R) does not slide off the lift rod strap (Q).Q1QRFig. 1Q2Fig. 27HOMEDEPOT.COM/GLACIERBAYPlease contact 1-855-HD-GLACIER for further assistance.

Installation (continued)the operation of the9 Checkingpop-up Operate the lift rod (S) up and down to verifythat the stopper (J) opens and closes correctly.SJ10Attaching the quick connecthose Attach the quick connect hose (I) connectionsto the hot faucet handle (B) connection, faucetbody (A) connection, and cold faucet handle (C)connection. Push until the connections snaptogether. Pull down moderately to ensure the connectionshave been made.CBAI1238

Installation (continued)11 Making the water supplyconnectionsUse 1/2 in. I.P.S. faucet connections (2), or usesupply line coupling nuts (3) (not included) witha 3/8 in. O.D. ball-nose riser (1).1NOTE: Before tightening the faucet connector to the watersupply, apply a second wrench to the supply tube fitting.This will prevent the supply tube from moving or twistingwhen tightening the faucet connector. Do not overtighten.23Operation1 Flushing and checking for leaksAIMPORTANT: After installation is complete, remove theaerator from the faucet (A) to flush the water lines. Do notlose the mesh washer (1). Ensure the washer is installed,as shown upon reinstallation of the aerator. Ensure the faucet (A) handles are in the offposition and turn on the water supply to checkfor leaks. If you discover any leaks, check yourconnections to ensure they are installed properly. Remove the aerator and housing (if applicable).Turn on the hot and cold handles to allow thewater to run for at least one minute. Thisflushes away any debris that could causedamage to internal parts. Turn off the water and reinstall the aerator andhousing (if applicable).19HOMEDEPOT.COM/GLACIERBAYPlease contact 1-855-HD-GLACIER for further assistance.

Operation (continued)2 Removing the quick connector If it is necessary to remove the quick connector(1), squeeze the tabs (2) on the quick connectorand then pull down to disconnect.2SqueezePulldown11Care and Cleaning To clean, wipe down with a damp cloth and dry with a towel. Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty willbe voided.TroubleshootingNOTE: Refer to the service parts section in this manual fora detailed drawing showing the location of the parts listedbelow.ProblemPossible CauseThere are leaks from thehandle.The bonnet nut has come loose and/or thewasher is dirty or damaged. Solution Clean or replace the washer.The aerator has anirregular or reducedwater flow.The aerator is dirty or mis-fitted. Remove the aerator andcheck for debris. Ensure that the mesh washeris properly installed.The water will not shut offcompletely.The cartridge is dirty or broken. Remove the handle to checkthe cartridge. Clean or replace.There is leaking from thesink drain at the base ofthe sink.The sink has a rough or irregular surface. Apply additional silicone sealantto the beveled side of the drainflange. Retighten and test for leaks.10Tighten the bonnet nut.

Service Parts23415106718Faucet ID tags canbe found on thehot water inlet11128139141516PartDescription17Part NumberPart1Index HRP10001*11Rubber washer2Index CRP10002*12Metal washerRP640463ScrewRP5000513Lock nutRP560264HandleRP13528*14BlockRP704215Bonnet nutRP7019315O-ringRP600026Cartridge HRP2006716Quick connect hoseRP7043017ClickInstall drainassemblyRP40228*18Lift rodRP40264*7Cartridge CRP200688WasherRP641479Nut & ScrewRP5613710AeratorRP30218**Specify FinishMany replacement cartridges, aerators, and drainassemblies can be purchased at your local TheHome Depot store or online at HOMEDEPOT.COM11DescriptionPart NumberRP64045

Questions, problems, missing parts?Before returning to the store, call Glacier Bay Customer Service8 a.m. - 7 p.m., EST, Monday - Friday9 a.m. - 6 p.m., EST, Saturday1-855-HD-GLACIER (1-855-434-5224)HOMEDEPOT.COM/GLACIERBAYRetain this manual for future use.

Modelo núm.HD67817W-6A04HD67817W-6001HD67817W-6027DSKU núm.1002476811302871349302871341GUÍA DE USO Y MANTENIMIENTOMANDOURI MEZCLADORA PARA BAÑO,DE ARCO ALTO, CON 2 MANERALESLUZ LED Y PIEZA EXTENDIDA DE 8"¿Problemas, preguntas o piezas faltantes?Antes de regresar a la tienda, llama al servicio al cliente deGlacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y lossábados entre 9 a.m. y 6 p.m.(hora estándar del Este)1-855-HD-GLACIER adecemos la confianza que has depositado en Glacier Bay al comprar este grifo para lavamanos. Nos esforzamospor crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet para vernuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar. ¡Gracias porelegir a Glacier Bay!