AOC-SIMLP-B AOC-SIMLP-B AOC-SIMLP-3 AOC-SIMLP-3

1y ago

28 Views

1 Downloads

1.22 MB

66 Pages

Report/dmca

Download PDF

Transcription

SUPERAOC-SIMLP-BAOC-SIMLP-B AOC-SIMLP-3AOC-SIMLP-3 USER'S GUIDERev. 1.0c

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideThe information in this User’s Guide has been carefully reviewed and is believed to be accurate.The vendor assumes no responsibility for any inaccuracies that may be contained in this document,makes no commitment to update or to keep current the information in this manual, or to notify anyperson or organization of the updates.Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.SUPERMICRO COMPUTER reserves the right to make changes to the product described in thismanual at any time and without notice. This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to anymedium or machine without prior written consent.IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TOUSE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OFSUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANYHARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THECOSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCHHARDWARE, SOFTWARE, OR DATA.Any disputes arising between manufacturer and customer shall be governed by the laws of SantaClara County in the State of California, USA. The State of California, County of Santa Clara shallbe the exclusive venue for the resolution of any such disputes. Supermicro's total liability for allclaims will not exceed the price paid for the hardware product.WARNING: Handling of lead solder materials used in thisproduct may expose you to lead, a chemical known tothe State of California to cause birth defects and otherreproductive harm.Manual Revision: Rev. 1.0cRelease Date: July 5, 2007Unless you request and receive written permission from SUPER MICRO COMPUTER, Inc., youmay not copy any part of this document.Information in this document is subject to change without notice. Other products and companiesreferred to herein are trademarks or registered trademarks of their respective companies or markholders.Copyright 2007 by SUPER MICRO COMPUTER, INC.All rights reserved.Printed in the United States of America1-2

Chapter 1: IntroductionTable of ContentsChapter I: Introduction . 1-41.1Overview . 1-41.2IPMI Version 2.0 . 1-51.3 Product Features . 1-61.4 Checklist . 1-61.5 An important Note to the User . 1-61.6 Contacting Supermicro . 1-7Chapter 2: Technical Speciﬁcations and Software Installation . 2-12.1 AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 Card Layout and Jumper .Locations . 2-12.2 Block Diagram . 2-32.3 Safety Guidelines . 2-4Chapter 3: Software Application and Usage . 3-13.1 Home Page . 3-33.2 Functions Listed On the Home Page . 3-53.2.1 Remote Control . 3-53.2.2 Virtual Media . 3-73.2.3 System Health .3-113.2.4 User Management . 3-173.2.5 KVM Settings . 3-213.2.6 Device Settings . 3-253.2.7 Maintenance . 3-383.3 Remote Console Main Page . 3-423.3.1 Remote Console Options . 3-43Chapter 4: Frequently Asked Questions . 4-11-3

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideChapter 1IntroductionThis manual is written for system integrators, PC technicians andknowledgeable PC users who intend to integrate Supermicro's unique IPMI 2.0Management functionality with the capability of KVM-over-LAN into their systems.It provides detailed information for the application and use of the AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 that supports remote access for system monitoring,diagnosis and management. With the most advanced technologies built-in, theAOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 offers a complete, efﬁcient, and costeffective remote server management.1.1 OverviewThe AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 is a highly efﬁcient, highly compatible and easy-to-use IPMI card that allows the user to take advantage of BMC,a baseboard management controller installed on a server motherboard and theIPMIView, an IPMI-compliant management application software loaded in a PC, toprovide serial links between the main processor and other system components, allowing for network interfacing via remote access. With an independent Peppercon'sKIRA100 processor built-in, the AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 provides the user a solution to ease the complex and expensive systems, allowing an administrator to access, monitor, diagnose and manage network interfacinganywhere, anytime.1.2 IPMI Version 2.0The AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 supports the functionality of IPMIVersion 2.0. The key features include the following: Supports IPMI over LAN Supports Serial over LAN Supports KVM over LAN (*AOC-SIMLP-B , AOC-SIMLP-3 only) Supports Virtual Media over LAN Supports LAN Alerting-SNMP Trap Supports Event Log Offers OS (Operating System) Independency Provides remote Hardware Health Monitoring via IPMI. Key features includethe following: Temperature monitoring Fan speed monitoring1-4

Chapter 1: Introduction Voltage monitoring Power status monitoring, chassis intrusion monitoring Remote power control to power-on, power-off or reboot a system Remote access to text-based, graphic-based system information,including BIOS conﬁgurations and OS operation information (KVM) Remote management of utility/software applicationsProvides Network Management Security via remote access/console redirection. Key features include: User authentication enhancement Encryption support enhancement, allowing for password conﬁguration security to protect sensitive data transferring via Serial overLAN1.3. Product Features(a) The AOC-SIMLP-B/SIMLP-B Series: (IPMI 2.0 with a DedicatedLAN) Low proﬁle Form Factor (5.1" W x 2.7" H) (129.3 mm W x 68.8 mm H) Supports 2U systems and above Supports IPMI over LAN(b) The AOC-SIMLP-3/SIMLP-3 * Series: (IPMI 2.0 with a DedicatedLAN and the Intel 82541PI GLAN Controller) Low proﬁle Form Factor (5.1" W x 2.7" H) (129.3 mm W x 68.8 mm H)Supports 2U systems and above (*AOC-SIMLP-3/AOC-SIMLP-3 only)Supports IPMI over LANIntel's 82541 PI Gigabit LAN Controller (with 3rd data LAN support)The AOC-SIMLP-3 supports KVM(c) Features Supported by Individual ModelsFeaturesDedicated LANfor IPMIYesSIMLP-BSIMLP-B YesYesSIMLP-3SIMLP-3 YesIntel 82541 PI forData --Yes

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guide1.4 CheckListIf your shipping package came with missing or damaged parts, please contactSupermicro's Tech. Support. Please refer to the following checklist whencontacting us.i. AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 :ii. Brackets: One full-size bracket, one low-proﬁle bracket and two screws,iii. CDR-SIMIPMI: One Installation CDiv. White Box with Correct Barcode Label (showing AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 ).1.5 An Important Note to the UserThe drawings and pictures shown in this manual were based on the latest PCBRevision available at the time of publishing of the manual. The AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 card you’ve received may or may not look exactlythe same as the graphics shown in the manual.1-6

Chapter 1: Introduction1.6 Contacting SupermicroHeadquartersAddress:Tel:Fax:Email:Web Site:SuperMicro Computer, Inc.980 Rock Ave.San Jose, CA 95131 U.S.A. 1 (408) 503-8000 1 (408) 503-8008marketing@supermicro.com (General Information)support@supermicro.com (Technical ail:SuperMicro Computer B.V.Het Sterrenbeeld 28, 5215 ML's-Hertogenbosch, The Netherlands 31 (0) 73-6400390 31 (0) 73-6416525sales@supermicro.nl (General Information)support@supermicro.nl (Technical Support)rma@supermicro.nl (Customer Support)Asia-PaciﬁcAddress:Tel:Fax:Web Site:SuperMicro, Taiwan4F, No. 232-1 Liancheng RoadChung-Ho 235, Taipei Hsien, Taiwan, R.O.C. 886-(2) 8226-3990 886-(2) 8226-3991www.supermicro.com.twTechnical Support:Email:support@supermicro.com.tw1-7

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideNotes1-8

Chapter 2: Technical Speciﬁcations and InstallationChapter 2Technical Speciﬁcations and SoftwareInstallation2.1 AOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 CardLayout and Jumper LocationsAOC-SIMLP-B/SIMLP-B /SIMLP-3/SIMLP-3 CardLayout and Jumper LocationsFront View78491061425111312Front Components1. LAN Port 1 (JLAN1) for IPMI/Keyboard/Video/Mouse over IP2. LAN Port 2 (JLAN2) for 3rd Data via Intel's 82541PI Controller3. Intel's 82541PI GLAN Controller4. Peppercon's KIRA 100 Processor5/6. SDRAM (128Mb/133MHz)7. JP5: LAN Port1 Activity LED Jumper8. JP7: JLAN 2 Control Jumper9. JP6: GLAN Port2 Activity LED Jumper10. JP1: JLAN1 Control Jumper11. D3: Power-on LED12. D4: Heart-beat (Activity) LED2-1

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideRear View12Rear Side Components1. Flash DRAM (64Mb/133MHz)2. VRAM (64Mb/166MHz)2-2

Chapter 2: Technical Speciﬁcations and Installation2.2 Block DiagramUARTPH2X10/-10IPMI-200 ConnectorsPCI-EETHERNETPHYUART InterfaceUSB InterfaceSupermicroFeatured GPIOKIRA100LPC InterfacePRSNT#FML InterfaceDVO VideoInterfaceRMIISMDATASMCLKSMALT#(IPMI may go to MBLAN)PCI x32Intel 82541PIGb LAN2-33rd LANDataLANIPMI & KVM

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guide2.3 Safety GuidelinesTo avoid personal injury and property damage, please carefullyfollow all the safety steps listed below when accessing your systemor handling the components:ESD Safety GuidelinesElectric Static Discharge (ESD) can damage electronic components. To prevent damage to your system. it is important to handle it very carefully. The following measuresare generally sufﬁcient to protect your equipment from ESD. Use a grounded wrist strap designed to prevent static discharge. Touch a grounded metal object before removing a component from the antistaticbag. Handle the IPMI card by its edges only; do not touch its components, peripheralchips, memory modules or gold contacts. When handling chips or modules, avoid touching their pins. Put the card and peripherals back into their antistatic bags when not in use.General Safety Guidelines Always disconnect power cables before installing or removing any componentsfrom the computer. Use only the correct type of bracket for the chassis. Please use a full-heightbracket for a 1U, 3U, 4U, Tower, or a Pedestal system. Use a low-proﬁle bracketfor a 2U or some of the proprietary chassis. Make sure to secure the bracketin the host system cabinet. (*Note: When used in a 1U system, the full-heightbracket is mounted into the riser card.) Disconnect the power cable before removing the data cable from the risercard. Make sure that the IPMI card is securely seated in the PCI slot to preventdamage to the system due to power shortage.2-4

Chapter 3: Software Application and UsageChapter 3Software Application and UsageWith an independent I/O processor embedded in Raritan's Kira 100 RISC SystemChip, the AOC-SIMLP-B( )/SIMLP-3( ) Add-On Card allows the user to access,monitor, manage and interface with systems that are in remote locations viaLAN. The necessary utilities for the access and conﬁguration of the add-on cardare included on the Supermicro bootable CDs that came with your card. Thissection provides information on the conﬁguration and the access of the IPMIcard on the network.Using the IPMICFG Utility to Conﬁgure IP/MAC Addresses andother IPMI Network Settings1. Run the ipmicfg utility from the bootable CD that came with your shipment.2. Refer to the table below to conﬁgure the IP/MAC addresses.BoardX7 SeriesH8 DDR2 MEMORYIPMIMACIPSIMLPIPMI CardAvailable IP/DHCPSIMLPIPMI CardAvailable IP/DHCPCommunication ThruDedicated LANLAN1 on MBDedicated LANLAN1 on MB3. Follow the instructions given in the Readme.txt ﬁle to conﬁgure GatewayIP/Netmask IP addresses, to enable/disable DHCP and to conﬁgure other IPMIsettings.*Note: The Readme.txt ﬁle is included in the CD that came with your shipment.A copy of the Readme.txt ﬁle, dated 07/05/2007, is also included below.IPMICFG Version 1.04 Copyright 2007 SuperMicro Computer Inc.Usage: IPMICFG Parameters (Example: IPMICFG -m 192.168.1.123)-mShow IP and MAC-m IPSet IP (format: ###.###.###.###)-a MACSet MAC (format: ##:##:##:##:##:##)-kShow Subnet Mask-k MaskSet Subnet Mask (format: ###.###.###.###)-dhcp onEnable the DHCP-dhcp offDisable the DHCP-gShow Gateway IP-g IPSet Gateway IP (format: ###.###.###.###)To Access the SIM1U/SIM1U Card from a Computer1. Choose a computer that is connected to the same network and open thebrowser.2. Type in the IP address of each server that you want to connect in the addressbar in your browser.3. Once the connection is made, the Log In screen as shown on the next pagedisplays.3-1

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideTo Log InOnce you are connected to the remote server, the following Log In screendisplays.1. Type in your Username in the "Username" box.2. Type in your Password in the "Password" box and click on "Login."(*Note: The default username is ADMIN. The default password is ADMIN.)3. The Home Page will display as follows:3-2

Chapter 3: Software Application and Usage3.1 Home PageHomeConsoleRemote Console ScreenLogout42Function Keys19356783.1.1 Buttons from the Home Page1Home: Click this icon to return to the Home Page.2Console: Click this icon to go to the Remote Console Screen.34Remote Console Screen: Displayed in the window is RemoteConsole Screen. Click on this window to go to the Remote ConsoleScreen.Logout: Click on this icon to log out.5Refresh: Click on this icon to refresh the screen of theremote console preview.6Power On: Click on this icon to power on the system of theremote host.7Power Down: Click on this icon to power down the systemof the remote host.8Reset: Click on this icon to reset the remote host.3-3

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guide3.1.2 Function Keys from the Home Page91234567Click on these function keys to use the functions as speciﬁed below.1. Remote Control: Click on this icon for remote accessand management of Video Console Redirection.2. Virtual Media: Click on this icon to use virtual remotemedia devices.3. System Health: Click on this icon to view and manage health monitoring for remote systems4. User Management: Click on this icon for User Management.5. KVM Settings: Click on this icon to conﬁgure keyboard, Video and mouse settings.6. Device Settings: Click on this icon to conﬁguredevice settings.7. Maintenance: Click on this icon to access, diagnoseand manage hardware devices(*Note: Please see the next page for details on the functions speciﬁed above.)3-4

Chapter 3: Software Application and Usage3.2 Functions Listed on the Home Page3.2.1. Remote ControlClick on the icon of Remote Control to activate its submenus-KVM Console andRemote Power as listed below.a. KVM ConsoleClick on this item to conﬁgure keyboard, mouse or video settings for the remotehost.Remote Console Screen12341Explanation of FunctionsIn the Single/Synchronized Mouse Mode, this cursor indicates thesystem that is currently active. For the Double Mouse mode, this is thecursor for the remote host.2This second mouse cursor only appears in the Double Mouse Mode.This cursor represents the local mouse.3This icon indicates the availability of Keyboard and Mouse.4This icon indicates the number of networks (users) that are connectedvia Console Redirection. (The number of ﬁgure icons indicates thenumber of users connected.)3-5

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guideb. Remote PowerClick on this item to conﬁgure the power settings for Remote Console as shownbelow.Remote Power Screen123Explanation of Functions1Power On: Click on this icon to power on the remote host.2Power Down: Click on this icon to power down the remotehost.3Reset: Click on this icon to reset the remote host.3-6

Chapter 3: Software Application and Usage3.2.2. Virtual MediaClick on the Virtual Media icon on the Home Page to activate its submenus-FloppyDisk, CD-ROM, Drive Redirection and Options as listed below.a. Floppy diskFloppy Disk Screen2314567Explanation of FunctionsFloppy Disk: Click on this function key to upload the1data stored in the local ﬂoppy disk image to the remotehost.2Active Image (Drive1): This window displays the datathat has been uploaded to Drive 1 of the remote host.3Active Image (Drive2): This window displays the datathat has been uploaded to Drive 2 of the remote host.4Floppy Image Upload: This option allows the user toupload the ﬂoppy image as "ﬂoppy" located in the remotehost. The ﬂoppy image uploaded shall be in the binaryformat with a maximum size of 1.44MB. It will be loadedto the Supermicro SIMLP card and will be emulated tothe host as a USB device.5Virtual Drive: Select a drive in the remote host as adestination drive for you to upload your image data.67Floppy Image File: Click on "Browse" to preview andselect the ﬁles that you wish to upload to the host driveselected.Upload: Once the correct ﬁle name appears in the box,click Upload to upload the ﬂoppy image to the drivespeciﬁed in the remote host.3-7

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guideb. CD-ROM ImageCD-ROM Image Screen23145678910Explanation of Functions1CD-ROM image: Click on this function key to share datastored in your local CD-ROM drive with other users in theremote host through the Windows Share application viaUSB.2Active Image (Drive1): This window displays the ﬁlename of the data currently active in host Drive 1.3Active Image (Drive2): This window displays the ﬁlename of the data currently active in host Drive 2.45Image on Windows Share: This option allows the userto conﬁgure Windows Share settings. It allows you todecide how you want to share the data stored in yourlocal CD-ROM with users in the remote host.Virtual Drive: Specify the drive that you want to shareyour data with in the remote host.6Share Host: Key in the IP Address or the name of thesystem you wish to share data with via Windows Share.7Share Name: Key in the name of the system you wishto share data with in the remote host.8Path to Image: Key in the location of source ﬁles thatyou wish to share via Windows Share.9User/Password (Optional): Key in the Username andpassword for the person to access the data that you wantto share and click "Set" to enter your selections.103-8

Chapter 3: Software Application and Usagec. Drive RedirectionDrive Redirection Screen23145678Explanation of FunctionsDrive Redirection: Click on this function key to make1local drives accessible for other users via consoleredirection. This function allows you to share your localdrives (Floppy, CD-ROM and HDDs) with users in theremote systems.2Active Image (Drive1): This window displays the ﬁlename of the data currently active in host Drive 1.3Active Image (Drive2): This window displays the ﬁlename of the data currently active in host Drive 2.45678Drive Redirection: Use this window to conﬁgure DriveRedirection settings.Disable Drive Redirection: Check the box to disableDrive Redirection. Once this function is disabled, localdrives will not be accessible for other users in remotehost.Force Read Only: Check this box to allow the datastored in local drives to be read in a remote system,but it cannot be overwritten to ensure data integrity andsystem security.Apply: Once you've conﬁgured your settings, click "Apply" to enter your settings.Reset Default: You can also key in your own settingvalues and re-set these values as "default" by clickingon this icon to reset the defaults.3-9

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guided. Virtual Media OptionsVirtual Media Options Screen241Explanation of Functions12Options: Click on this function key to activate the VirtualMedia sub-menu.Virtual Media Options: Use this option to disable or enable USB MASS storage in the remote host. Check thisbox to disable the function of Virtual Media Options toprevent data stored in a local drive from being accessed,or uploaded by the user in the remote host. The defaultsetting is "enabled."3Apply: Once you've checked the box, click "Apply" toenter this value.4Reset to Defaults: If you want to set "Disabled" as thedefault setting for the item-Virtual Media Options, clickon this icon.3-10

Chapter 3: Software Application and Usage3.2.3. System HealthClick on the System Health icon on the Home Page to activate its submenus:Chassis Control, Monitor Sensor, System Event Log and Alert settings as listedbelow.System Health Screena. Chassis ControlChassis Control Screen21312Chassis ControlChassis Control: Click on this function key to access Health Monitoring information on the remote chassis. The items monitored include 1. Chassis Information 2.Power Control.Chassis Information:The following remote chassis information is included:*Power Is: This indicates if the system is on or off for the remote host.*Power On Counter: If power is on, then the counter indicates the length of timethe power has been turned on.*Last Restart Cause: This item states the reason why the host system is restartedif the system has been turned off.* Refresh: Click the Refresh button to update "Chassis Information" as shown inWindow 2.3-11

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guide3Power ControlThe following Power Control items are included:Refresh: Click on this icon to refresh the screen of theremote host.Power On: Click on this icon to power on the system forthe remote host.Power Down: Click on this icon to power down the systemfor the remote host.Power Cycle: Click on this icon to power down the systemfor the remote host and turn it back on later.Reset: Click on this icon to reset the remote console.3-12

Chapter 3: Software Application and Usageb. Monitor SensorsMonitor Sensors ScreenRemote ControlKVM ConsoleRemote PowerMonitoring SensorsVirtual MediaFloppy DiskCD-ROM ImageDrive RedirectionOptionsSystem HealthChassis ControlMonitor SensorsSystem Event LogAlert SettingsUser ManagementChange PasswordUsers & GroupsPermissionsKVM SettingsUser ConsoleKeyboard/MouseDevice SettingsNetworkDynamic DNSSecurityCertificateDate/TimeEvent LogSNMP SettingsMaintenanceDevice InformationEvent LogUpdate FirmwareUnit Reset11Sensor TypeSensor NameSensor StatusTemperatureCPU1 Temp ANo readingSensor ReadingTemperatureCPU2 Temp AOk47 degrees CTemperatureCPU1 Temp BOk35 degrees CTemperatureCPU2 Temp BNo readingTemperatureSys TempOkVoltageCPU1 VcoreBelow lower non-recoverable threshold 0 ( /- 0.004) VoltsVoltageCPU2 VcoreOkVoltage3.3VOk3.264 VoltsVoltage5VOk4.872 ( /- 0.012) VoltsVoltage12VOk11.904 ( /- 0.048) VoltsVoltage-12VBelow lower non-recoverable threshold -3.800 ( /- -0.050) VoltsVoltage1.5VOk1.456 ( /- 0.008) VoltsVoltage5VSBOk4.848 ( /- 0.012) VoltsVoltageVBATOk3.184 ( /- 0.008) VoltsFanFan1/CPUBelow lower non-recoverable threshold 0 RPMFanFan2/CPUBelow lower non-recoverable threshold 0 RPMFanFan3OkFanFan4Below lower non-recoverable threshold 0 RPMFanFan5Below lower non-recoverable threshold 0 RPMFanFan6Below lower non-recoverable threshold 0 RPM44 degrees C1.288 ( /- 0.004) Volts3750 RPMPhysical Security Chassis IntrusiBelow lower non-critical threshold0 unspecifiedPower SupplyPower FailOk0 unspecifiedModule / BoardCPU0 Internal E Ok0 unspecifiedModule / BoardCPU1 Internal E Ok0 unspecifiedModule / BoardCPU OverheatOk0 unspecifiedModule / BoardThermal Trip0Ok0 unspecifiedModule / BoardThermal Trip1Ok0 unspecifiedMonitoring Sensor: Click on this function key to display the following Health Monitoring Information shown in the following table:3-13

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's GuideHealth Monitoring Sensor Information on the Remote HostTemperature MonitoringVoltage MonitoringFan ControlPhysical SecurityModule/Board CPU0Internal E.Module/Board CPU1Internal E.Module/Board CPUOverheatCPU1 Temperature(Temp A, Temp B)CPU2 Temperature(Temp A, Temp B)System TemperatureCPU1 VCoreCPU2 VCore3.3V5V, 5VSB 12V, -12V1.5VVBATFan1/CPU FanFan2/CPU FanFan 3 – Fan 6Chassis IntrusionTemp A: CPU1 Core1 Temperature, Temp B: CPU1Core2 Temperature,Temp A: CPU2 Core1 Temperature, Temp B: CPU2Core2 Temperature,CPU1 Vcore: CPU1 Core VoltageCPU2 Vcore: CPU2 Core Voltage5VSB: 5V StandbyVBAT: Battery VoltageSystem Fans/Chassis FansWhen the CPU temperature exceeds this presettemperature, the overheat LED or alert will betriggered, the CPUs will slow down, the CPU fanswill be in the full speed mode.When the system temperature exceeds this presettemperature, the overheat LED or alert will betriggered, and the cooling fans will be in the fullspeed mode to prevent system overheat.Module/Board ThermalTrip3-14

Chapter 3: Software Application and Usagec. System Event LogSystem Event Log ScreenHomeHomeConsoleLogoutRemote ControlKVM ConsoleRemote PowerSystem Event LogEvent TypeVirtual MediaFloppy DiskCD-ROM ImageDrive RedirectionOptionsSystem HealthChassis ControlMonitor SensorsSystem Event LogAlert SettingsUser ManagementChange PasswordUsers & GroupsPermissionsKVM SettingsUser ConsoleKeyboard/MouseDevice SettingsNetworkDynamic DNSSecurityCertificateDate/TimeEvent Log1DateTimeSourceDescriptionDirectionSEL record 02 Pre-Init00:01:04 Fan6Lower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 Fan6Lower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan6Lower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan5Lower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 Fan5Lower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan5Lower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan4Lower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 Fan4Lower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan4Lower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan2/CPULower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 Fan2/CPULower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan2/CPULower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan1/CPULower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 Fan1/CPULower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Fan1/CPULower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 -12VLower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 -12VLower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 -12VLower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 CPU1 VcoreLower Non-recoverable going low Assertion EventSEL record 02 Pre-Init00:01:04 CPU1 VcoreLower Critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 CPU1 VcoreLower Non-critical going lowAssertion EventSEL record 02 Pre-Init00:01:04 Chassis IntrusiSEL record 02 06/07/2006 10:04:47 Thermal Trip1General Chassis intrusionAssertion EventState AssertedDeassertion EventSEL record 02 06/07/2006 10:04:47 CPU1 Internal E State AssertedAssertion Eventhttp://192.168.1.200/home.asp (1 of 3)6/8/2006 4:28:28 PM1System Event Log: Click on this function key to display the System Health EventLog for the remote host system.3-15

AOC-SIMLP-B( )/AOC-SIMLP-3( ) User's Guided. Alert SettingsAlert Settings ScreenHomeConsoleLogoutRemote ControlKVM ConsoleRemote Power[ Filter List ]Virtual Media2Floppy DiskCD-ROM ImageDrive RedirectionOptionsIndex StatusSystem Health1User ManagementChange PasswordUsers & GroupsPermissionsKVM SettingsUser ConsoleKeyboard/MouseDevice SettingsNetworkDynamic DNSSecurityCertificateDate/TimeEvent LogSNMP SettingsMaintenanceDevice InformationEvent LogUpdate FirmwareUnit ResetFilter TypeActionPolicy# Severity3IPMI Filter List4OffsetGenerator Sensor SensorData 1TriggerMaskIDTypeNoData 2Data 30 unspecifiedffffffffffffff ff ff ff ff ff ff ff ff ff [edit]2 disabled configurable0 unspecified00000000000000 00 00 00 00 00 00 00 00 00 [edit]3 disabled configurable0 unspecified00000000000000 00 00 00 00 00 00 00 00 00 [edit]4 disabled configurable0 unspecified00000000000000 00 00 00 00 00 00 00 00 00 [edit]5 disabled configurable0 unspecified00000000000000 00 00 00 00 00 00 00 00 00 [edit]6 disabled configura

knowledgeable PC users who intend to integrate Supermicro's unique IPMI 2.0 Management functionality with the capability of KVM-over-LAN into their systems. It provides detailed information for the application and use of the AOC-SIMLP-B/