9469b-TEM TEMPUR-Ergo Plus Manual TEPL-100-07 V3

Transcription

TEMPUR‑Ergo Plus Complete Reference GuidePatents pending 2014 Tempur-Pedic Management, LLC. All Rights Reserved.TEPL-100-07

TEMPUR-Ergo Plus LIMITED WARRANTY FOR TEMPUR‑ERGO PLUSTEMPUR-PEDIC NORTH AMERICA, LLC (“TEMPUR-PEDIC”)WARRANTS THAT IT WILL, AT TEMPUR-PEDIC’S OPTION, REPLACEOR REPAIR PURCHASER’S TEMPUR‑ERGO PLUS MODEL IF ITIS DEFECTIVE DUE TO FAULTY WORKMANSHIP OR MATERIALS,SUBJECT TO THE LIMITATIONS DESCRIBED IN THIS WARRANTY.TEMPUR-PEDIC UNDERTAKES NO RESPONSIBILITY FOR THEQUALITY OF THE GOODS EXCEPT AS OTHERWISE PROVIDED IN THISWARRANTY. THERE ARE NO WARRANTIES THAT EXTEND BEYONDTHE DESCRIPTION ON THE FACE THEREOF.THIS WARRANTY APPLIES ONLY TO TEMPUR‑ERGO PLUS MODEL.THIS MODEL MAY BE IDENTIFIED BY REFERENCE TO THE SERIALNUMBER ON THE PRODUCT.YEARS 1 THROUGH 3: FULL COVERAGE OF PARTS AND LABORTEMPUR‑Ergo Plus is warranted against defects in the workmanship ormaterials for a period of three (3) years from the warranty commencementdate. During these first three years of the warranty, the entire product isso covered, including factory supplied electronics, electrical components,drive motors and power supply components. Upon notice during thefirst through third year from the warranty commencement date, TempurPedic will send replacement parts to the purchaser, at no cost, in orderto replace any such defective part. In addition, Tempur-Pedic will payall authorized labor and transportation costs associated with the repairor replacement of any parts which Tempur-Pedic determines to bedefective. This three (3) year warranty shall not apply if the purchaserdoes not return any and all defective parts to Tempur-Pedic within 15days of purchaser’s receipt of such replacement parts furnished. Returnof the frame, however, should it need to be replaced, is not required.YEARS 4 THROUGH 5: FULL COVERAGE OF PARTS ONLYUpon notice during the years four (4) and five (5) from the warrantycommencement date, Tempur-Pedic will offer replacement parts forany defective parts to the purchaser. Factory supplied electronics,electrical components, drive motors and power supply components areincluded. This two (2) year Warranty shall not apply if purchaser doesnot return any and all defective parts to Tempur-Pedic within 15 days ofpurchaser’s receipt of replacement part. Purchaser shall bear all service,transportation, labor and shipping costs related to the delivery and/orreplacement of the defective part.FRAME ONLY—YEARS 1 THROUGH 25 WARRANTYNotwithstanding the above, Tempur-Pedic extends a 25 Year Warranty onthe frame itself used in this product. Specifically, Tempur-Pedic warrantsthat for a full 25 years, any defect in the workmanship or the materialsused in the frame itself shall be covered. The 25 year time span will bedated from the commencement of this warranty. For purposes of this 25Year Warranty, the frame consists of the metal structure of the base andspecifically excludes its cover, its side rails, decking and legs, actuatorlift motors, control box, remote controls, power supply, and any powersupply cords. Return of the frame should it need to be replaced, is notrequired.In no instance will this warranty cover any damage attributable to misuseor to normal wear and tear or to excessive weight placed upon theproduct. Nor will this warranty cover any purchaser other than the originalpurchaser nor will it cover product purchased from an unauthorizedthird party. If you are not the original purchaser of this product, youtake “as is” and “with all faults.” If you did not purchase this TempurPedic TEMPUR‑Ergo Plus we will require proof of purchase from youdemonstrating that you are the original purchaser and are eligible to makea valid claim under this Warranty.CUSTOMER SERVICE: 1–800–821–66212

WarrantyADDITIONAL TERMS AND CONDITIONSIn no instance will this warranty cover any damage attributable to misuseor to normal wear and tear or to excessive weight placed upon theproduct. Nor will this warranty cover any purchaser other than the originalpurchaser nor will it cover product purchased from an unauthorizedthird party. If you are not the original purchaser of this product, you take“as is” and “with all faults.” If you did not purchase this Tempur-Pedic TEMPUR‑Ergo Plus directly from Tempur-Pedic we will require proof ofpurchase from you demonstrating that you are the original purchaser andeligible to make a valid claim under this Warranty.This Warranty does not include coverage for damage caused by thepurchasers or by other users if the product has been used in a mannerinconsistent with the operation and maintenance procedures outlinedin the Complete Reference Guide, this Warranty, or any other applicabledocument published or approved by Tempur-Pedic. Nor does it includecoverage if the product has been repaired or modified by the purchaseror by an unauthorized third party or if the product has been damaged intransit. This Warranty does not apply to damage to mattresses, fabric,cables, electrical cords or items supplied by Resellers, as defined below.Contact the Reseller or other appropriate party for warranty informationon these items. Nor does this Warranty apply to any unnecessary servicecalls, including costs for in-home service calls solely for the purpose ofeducating the consumer about the unit or finding an unsatisfactory powerconnection. In addition, if the recommended weight restrictions are notfollowed (Twin, Twin Long, Double, Queen, and Split/Dual CA King bases– up to 650 lbs. each) this Warranty is void.Replacement parts may be new or reconditioned at Tempur-Pedic’sdiscretion.Except for the 25 Year Warranty provided for the frame of this product,there is no warranty at all after five years, dating from commencement ofthis Limited Warranty.The decision to repair or to replace defective parts under this LimitedWarranty shall be made by Tempur-Pedic at its option and at its solediscretion. Except for the Warranty provided for the frame of this product,there is no warranty at all after five years, dating from commencement ofthis Limited Warranty.TEMPUR-PEDIC SHALL NOT BE LIABLE FOR INCIDENTAL ORCONSEQUENTIAL DAMAGES RESULTING FROM THE USEOF THIS PRODUCT OR ARISING OUT OF ANY BREACH OFTHIS WARRANTY. THE EXCLUSIVE REMEDY FOR BREACHOF THIS WARRANTY SHALL BE REPLACEMENT OR CREDITTOWARDS REPLACEMENT AS SET FORTH HEREIN. THEREARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDINGIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE, OTHER THAN THE WARRANTYDESCRIBED ON THE FACE OF THIS LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental orconsequential damages, so the above limitation or exclusion may notapply to every purchaser. This Warranty gives the purchaser specific legalrights, and the purchaser may also have other legal rights, which mayvary from state to state. This Warranty is valid in all 50 states, Puerto Ricoand Canada.If you the purchaser experience any problem with your TEMPUR‑Ergo Plus during the warranty period, please consult the troubleshootingsection of your Reference Guide. If the problem persists,please contact Tempur-Pedic’s Customer Service Departmentby calling toll-free 1‑800‑821‑6621 or by sending an email tocustomer.service@tempurpedic.com.PLEASE RETAIN THIS WARRANTY PAPERWORK AND ORIGINALSALES RECEIPT FOR EASY FUTURE REFERENCE ANDDOCUMENTATION.ADDITIONAL LIMITATIONS ON WARRANTY COVERAGEIn the event a warranty claim is filed and a warranty replacement isdeemed necessary, purchaser will be required to surrender the originalproduct, including any components, to Tempur-Pedic at the time of thereplacement. Return of the frame, however, should it need to be replaced,is not required.Repairs to or replacement of the Tempur-Pedic TEMPUR‑Ergo Plusmodel or its components under the terms of this Limited Warranty willapply to the original warranty period and will not serve to extend suchperiod. This Warranty begins on the “warranty commencement date”which is the date of purchase for new unused products.If you did not purchase this Tempur-Pedic TEMPUR‑Ergo Plus modeldirectly from Tempur-Pedic, proof of purchase will be required todemonstrate that you are the original purchaser and eligible to make avalid claim under this Warranty.If original proof of purchase is not provided by the purchaser,Tempur‑Pedic reserves the right to determine if the unit is covered, or isnot covered, by this Warranty and may use the manufacturing date as thewarranty commencement date.CUSTOMER SERVICE: 1–800–821–66213

TEMPUR-Ergo Plus Table of ContentsSAFETY PRECAUTIONS. 5COMMONLY ASKED QUESTIONS AND ANSWERS. 9SPECIFICATIONS. 10INSTALLATIONInstallation Instructions. 11Pre-Delivery Procedure. 12Delivery Procedure. 13Headboard Installation. 15OPERATIONWireless Remote Control Features. 17Operating Instructions. 18SPECIAL FUNCTIONSSystem Reset. 19Emergency Power-Down. 19ADVANCED REMOTE CONTROL PROGRAMMINGProgramming Remotes. 20Change from Tandem System to Single System. 21TROUBLESHOOTING. 22Conforms to UL Standard 962.Certified to CSA StandardC22.2 No. 68.CUSTOMER SERVICE: 1–800–821–66214

Safety PrecautionsSafety PrecautionsWARNING! Never operate the furnishing with the air openings blocked.Keep the air openings free of lint, hair and the like.IMPORTANT SAFETY Never drop or insert any object into any opening.INSTRUCTIONS. Do not use outdoors. Do not operate where aerosol (spray) products arePLEASE READ THESEbeing used or where oxygen is being administered.INSTRUCTIONS To disconnect, turn all controls to the off position,then remove plug from outlet.THOROUGHLY BEFOREUSING THIS PRODUCT.WARNING!of Injury — keep children away from extendedSAVE THESE INSTRUCTIONS! Riskfoot support (or other similar parts). Keep the cord away from heated surfaces.Your TEMPUR‑Ergo Plus system has been designedto provide you with the reliable operation and durabilityyou expect. This product has been inspected andtested prior to shipment.When using an electrical furnishing, basic precautionsshould always be followed, including the following:READ ALL INSTRUCTIONS BEFORE USING YOURTEMPUR‑ERGO PLUS.DANGERTo reduce the risk of electric shock: Always unplug this furnishing from the electricaloutlet before cleaning.WARNING!To reduce the risk of burns, fire, electric shock, or injuryto persons: Unplug from outlet before putting on or taking off parts. Close supervision is necessary when this furnishing isused by, or near children, invalids, or disabled persons. Use this furnishing only for its intended useas described in these instructions. Do not useattachments not recommended by the manufacturer. Never operate this furnishing if it has a damaged cordor plug, is not working properly, has been dropped ordamaged, or dropped in water. Return the furnishing to aservice center for examination and repair.CUSTOMER SERVICE: 1–800–821–66215

TEMPUR-Ergo Plus SAVE THESEINSTRUCTIONS!FOR BEST RESULTS, YOUR TEMPUR‑Ergo GROUNDING SAFETYPROTECTOR (not included).PLUS SHOULD BE PLUGGED INTO A SURGEUnauthorized modifications could void the electricalportion of your warranty.WARRANTY PRECAUTION!Do not open control box, motors or wirelessGROUNDING INSTRUCTIONSremote control (with the exception of the batteryThis product must be grounded. If it should malfunctioncompartments). The warranty is void if these unitsor breakdown, grounding provides a path of leastare tampered with. Any repair or replacement ofresistance for electric current to reduce the risk ofTEMPUR‑Ergo Plus parts must be performed by anelectric shock. This product is equipped with a cordauthorized service person.having an equipment-grounding conductor anda grounding plug. The plug must be plugged intoan appropriate outlet that is properly installed andgrounded in accordance with all local codes andordinances.IN-HOME USE AND HOSPITAL DISCLAIMERYour TEMPUR‑Ergo Plus is strictly designed forin‑home use only. It is NOT designed for hospitaluse and is NOT designed to meet hospital standards.DO NOT USE this bed with TENT TYPE oxygen therapyDANGER: Improper connection of theequipment or near explosive gases.equipment-grounding conductor can result inWARNING!a risk of electric shock. Check with a qualifiedelectrician or serviceman if you are in doubt asDO NOT USE NEAR PEOPLE USING OR WEARINGto whether the product is properly grounded.MEDICAL DEVICES. FOR HOUSEHOLD / RESIDENTIALDo not modify the plug provided with theUSE ONLY. DO NOT USE OUTDOORS.product—if it will not fit the outlet. have aCAUTION!proper outlet installed by a qualified electrician.RISK OF ELECTRIC SHOCK. DRY LOCATIONUSE ONLY.This product is for use on a nominal 120-volt circuitand has a grounding plug that looks like the plugillustrated in sketch A (see figure below). Make surethat the product is connected to an outlet having thesame configuration as the plug. No adaptor shouldbe used with this product.CUSTOMER SERVICE: 1–800–821–66216

Safety Precautionsdescribed in these instructions. Do not use attachmentsSMALL CHILDREN ANDPETS WARNINGnot recommended by the manufacturer.After your TEMPUR‑Ergo Plus has been unboxed,IMPORTANT SAFETY FEATURESUse this furnishing only for its intended use asIf there is an overload weight condition on the head orfoot mechanism, the control unit will automatically stopthe corresponding functions. Once the excess weightis removed, the control unit will automatically allow allfunctions to resume.immediately dispose of packaging as it can smothersmall children and pets. To avoid injury, children andpets should not be allowed to play on or under thebed. Children should not operate this product withoutadult supervision. Close supervision is necessary whenthis furnishing is used by, or near children, invalids, orLocking casters are available for aftermarket purchase.In order to prevent the movement of this product withcasters, all four casters should be in the locked position.This can be accomplished by pushing down the lockinglatch on the caster. To resume mobility of the product,lift the locking latch up. You are strongly encouraged toplace rubber caster cups or carpet squares under thedisabled persons.SAVE THESE INSTRUCTIONS!Your TEMPUR‑Ergo Plus has been designed toprovide you with the reliable operation and durabilityyou expect. This product has been inspected andtested prior to shipment.casters in addition to locking them in place if the productSERVICE REQUIREMENTSis positioned on a hard surface floor such as hardwood,Service technicians are not responsible for movingtile or linoleum. Although the casters are locked and willfurniture, removing headboards and footboards ornot roll, they may slide.any items required to perform maintenance on youradjustable bed. In the event the technician is unable toUSER-SERVICEABLE PARTSThis product is specifically designed to bemaintenance-free for the user. Therefore, you areencouraged not to open any motors, alter the wiring,perform service due to lack of accessibility, the servicecall will be billed to the purchaser and the service willbe re-scheduled.or adjust, modify or change the structure of theproduct, as it will void the warranty.POWER RATINGS:MODEL NO: ADP-73ARINPUT: AC 120V VAC, 60 HZ, 2.0 A MAXOUTPUT: 29VDCRATED CURRENT: 2.5A MAX.CONTROL ACTUATOR: 2CUSTOMER SERVICE: 1–800–821–66217

TEMPUR-Ergo Plus RADIO FREQUENCY IS 433 MHZ.INTENDED USAGEThe electric adjustable bed should be installed withFCC COMPLIANCEthe Headboard Bracket and/or the head of the frameTHIS device complies with part 15 of the FCCshould be positioned close to a wall.Rules. Operation is subject to the followingtwo conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept any interference received, includinginterference that may cause undesiredoperation.TO comply with the FCC RF exposurecompliance requirements, no change to theantenna or the device is permitted. Any changeto the antenna or the device could result in thedevice exceeding the RF exposure requirementsand void user’s authority to operate the device.PRODUCT RATINGSThe lift motors in your TEMPUR‑Ergo Plus are NOTdesigned for continuous use. Reliable operation andfull life expectancy will be attained as long as the liftmotors do not operate more than two (2) minutesover an 20-minute period, or approximately 10%duty cycle. Any attempt to circumvent or exceed thisrating will shorten the life expectancy of this productand may void the warranty. The recommended weightrestrictions on our TEMPUR‑Ergo Plus systems areas follows: Twin, Twin Long, Double, Queen, andSplit/Dual CA King bases – up to 650 lbs. each.This TEMPUR‑Ergo Plus will structurally support therecommended weight distributed evenly across thehead and foot sections. This product is not designed tosupport or lift this amount of weight in the head or footsections alone.NOTE: Exceeding the recommended weightrestrictions could damage your TEMPUR‑ErgoPlus and void your warranty.For best performance, you should enter and exit theTEMPUR‑Ergo Plus while it is in the flat or fully loweredposition.CUSTOMER SERVICE: 1–800–821–66218

Questions and AnswersCommonly asked Questions and AnswersWHAT IS THE HEIGHT OF THE TEMPUR‑ERGO PLUSADJUSTABLE BASE?With standard legs installed, the overall height isapproximately 15 1/4 inches floor to the bottom ofthe mattress. The distance between the floor and thebottom edge of the base, with standard legs installed,is approximately 12 inches. See chart on page 10 forother options.IS IT POSSIBLE TO RAISE THE HEIGHT OF THETEMPUR‑ERGO PLUS?The height of the TEMPUR‑Ergo Plus can be adjustedfrom approximately 7 3/4 inches to approximately15 1/2 inches with leg and caster sets available fromTempur‑Pedic. See the chart on page 10 for availableoptions.WHICH LEGS ARE COMPATIBLE WITH THE 2-INCH LEGEXTENDERS?The 2-inch leg extenders can be used with the 12-inchstandard leg only.DOES THE TEMPUR‑ERGO PLUS COME WITHFOOTBOARD ATTACHMENTS?The TEMPUR‑Ergo Plus is not designed to beattached to a bed footboard. However, you can usea “freestanding” bed including headboard, footboardand side rails by placing the complete TEMPUR‑ErgoPlus within the assembled bed. It may be easiestto assemble the bed around the adjustable base.You should measure the inside dimensions of theassembled bed to be sure the adjustable base will fit.One of our riser leg sets may be required in some cases.WHERE IS THE SERIAL NUMBER ON THETEMPUR‑ERGO PLUS?The serial number can be found on the law tag attachedto the cover, the power supply under the base and onthe frame just below the foot end of the base. It maybe easier to see by lifting the foot section slightly ifpossible.WILL THE TEMPUR‑ERGO PLUS FIT INSIDE EXISTINGFURNITURE?The TEMPUR‑Ergo Plus is designed to fit into most“freestanding” beds. We always recommend youmeasure the inside dimensions of the assembled bed tobe sure the TEMPUR‑Ergo Plus will fit. Please refer tothe specifications on page 10 for dimensions of the base.One of our riser leg sets may be required in somecases to adjust height. The adjustable base shouldnot be used in conjunction with bed slats. The weightof the base can cause slats to break. Slats should beremoved or the base height should be adjusted suchthat the base stands above the slats and the slatsbear no weight.DOES THE UNIT HAVE AC OR DC MOTORS?The lift motors used on the TEMPUR‑Ergo Plus areDC motors. The base’s power supply converts the ACpower from the wall outlet to DC power.WHO DO I CALL FOR SERVICE OR SUPPORT IF NEEDED?Service and technical support are available bycalling our dedicated customer service group at1-800-821-6621. An owner’s manual is included witheach base including other information for makingwarranty claims.IS AN EXTENDED WARRANTY AVAILABLE?No.DO I GET A FULL WARRANTY IF I PURCHASE A FLOORMODEL?Yes. However, your warranty start date is the date ofmanufacture which is clearly marked on the law tagattached to the base (not your actual purchase date).WHAT ARE THE ELECTRICAL REQUIREMENTS OF THETEMPUR‑ERGO PLUS?This product is for use on a 120-volt circuit. It requiresapproximately 2.5 A of electricity.CUSTOMER SERVICE: 1–800–821–66219

TEMPUR‑Ergo Plus Bed TypeSpecificationsTwinA. BaseWidthB. BaseLengthProductWeight37.8"74.8"110 lbTwin Long37.8"78.8"110 lbDouble53.2"74.8"136 lbQueen58.3"78.8"141 lbSplit CA King35.8"82.7"108 lb12"A3 1/4"B2"15 1/4"Measurements are approximate and based on standard 12-inch leg.NOTE: 2-inch extender approved for use with standard 12-inch leg only.Total height: Legs tion4.5" LEG4.5" LEGWITH CASTER6.5" LEG6.5" LEGWITH CASTER9" LEG9" LEGWITH CASTER12" LEG12" 2" "17.25"CUSTOMER SERVICE: 1–800–821–662110

InstallationInstallation InstructionsBefore discarding any packing materials, check yourTEMPUR-Ergo Plus carton and verify the following*Attached to base for shipping.Appearance of some parts may differ from photos.items in the parts list are included:PARTS LISTA. Wireless Remote Control (1) andA.B.C.D.*E.*F.*AA Batteries (2)B. Legs (4)C. 9-Volt Batteries (2)D. Mattress Retainer Bar (1)*E. Retainer Bar Plate (2)*F. Retainer Bar Bolt (4)*CUSTOMER SERVICE: 1–800–821–662111

TEMPUR‑Ergo Plus Pre‑Delivery ProcedureSTEP 1STEP 6Lift carton top off box to reveal the bottomof the base.Once the warehouse test is successful and complete: Unplug the power extension cord Remove the batteries from the remote control andSTEP 2Using a power extension cord to reach the base,plug in the base’s power cord.NOTE: Do not uncoil the base power cordwhich is packaged for shipment.power supply and return both to the accessorypack Place the lid back on the outer carton and securefor deliveryNOTE: Always keep the Ergo base in a flat,horizontal position during transportation andSTEP 3Slide the cover off the battery compartment on thepower supply and install the provided (2) 9-Voltbatteries. Replace the battery compartment cover.NOTE: Do not mix old and new batteries.delivery.NOTE: To avoid damage to the TEMPUR-Ergo Plus, always open the carton while the bed is inthe flat position.STEP 4Remove the remote control and (2) AA batteriesfrom the accessory pack, remove the cover from theremote control’s battery compartment, and installthe batteries.NOTE: Do not mix old and new batteries.STEP 5Power Test Procedure:Press each of the following buttons long enough toilluminate the blue back light on the remote control,and watch/listen for the base to activate. Thisensures you will be delivering a base that is fullyfunctional. Test the base by pressing the buttons inthe following sequence.1. Head Lift2. Leg Lift3. FlatNOTE: Only press each button long enough tohear or see the function activate on the base.CUSTOMER SERVICE: 1–800–821–662112

InstallationDelivery ProcedureNOTE: Always keep the TEMPUR-Ergo Plus inSTEP 4a flat, horizontal position during transportationRemove the remote control and (2) AA batteriesand delivery. Always open the box in the flatfrom the accessory pack, remove the cover from theposition.remote control’s battery compartment, and installthe (2) AA batteries into the remote.STEP 1Carefully take base in the carton to the bedroom andplace next to where the customer wants it set up.STEP 2Carefully lift the TEMPUR-Ergo Plus out of theshipping carton, keeping the unit topside down.For safety reasons, this should be performed bytwo people.STEP 5Install (2) 9-Volt batteries into the batteryNOTE: To avoid damageto the adjustable base,compartment of the power supply.NOTE: Do not mix old and new batteries.always open the cartonwhile the bed is in theflat position.STEP 6Attach TEMPUR-Ergo Plus Legs: Open theaccessories box, take out the (4) legs, and threadSTEP 3them in a clockwise direction into the pre-threadedThe products come packed in a cardboard box.Some components are also sealed in plastic film.To unpack, proceed as follows:holes in the frame.NOTE: Hand tighten the legs securely to theframe. DO NOT over tighten. Make sure the legsSTEP 3Aare screwed completely into the frame. LegsRemove the cardboard and plastic film from thethat are not securely attached may becomecomponents.unsafe. DO NOT unscrew a leg to compensatefor an uneven floor.STEP 3BCheck the package contents.NOTE: Locking casters are available forSTEP 3Caftermarket purchase. In order to prevent theDispose of the packaging materials.STEP 3Dmovement of this product, all four castersshould be in the locked position.Keep the user manual at hand for the operators.CUSTOMER SERVICE: 1–800–821–662113

TEMPUR‑Ergo Plus STEP 7STEP 8CCarefully flip the TEMPUR-Ergo Plus over to theStart with the right side and insert two (2) Retainertopside up position.Bar Bolts (F) through the holes of the Retainer BarNOTE: Make sure to lift the adjustable base offthe ground before flipping over. DO NOT use legsPlate (E), through the opening in the MattressRetainer Bar (D), to the base. Do not over tighten.as a leverage point to ensure they do not break.!ATTENTION ! Improper handlingDO NOTlean the bed against theinstalled legs to flip it over.STEP 8!Proper handlingTurn bed over without leaning against theRemove Mattress Retainer Bar (D) and install in uprightinstalled legs.position using a hex head driver (provided).STEP 8DRepeat bolt installation for the left side.STEP 8EEnsure the Mattress Retainer Bar (D) is lined up to the edgeof the bed and tighten all four Retainer Bar Bolts (F).STEP 9If this delivery involves dual bases and/or splitmattresses, program accordingly. (Program remotecontrol(s) per the instructions on page 20.)STEP 10Place the mattress(es) on the base(s).STEP 8ALine up Mattress Retainer Bar (D) to the edge of the footof the bed.STEP 8BLine up the Retainer Bar Plate (E) over the MattressRetainer Bar (D) so the threaded holes are lined up.STEP 11Ensure the power switch on the surge protector is inthe “on” position and that it is plugged into the walloutlet. Check the system for functionality with themattress in place.NOTE: If the system does not respond, followthe setup procedure again to ensure that thebase and remote control are communicating.CUSTOMER SERVICE: 1–800–821–662114

InstallationHeadboard InstallationThe headboard kit is an add-on. It is not shippedstandard with the product.STEP 1Assemble the Headboard Bracket:NOTE: This step is needed if using a headboardONLY; not headboard, footboard and side rails.STEP 1ANOTE: Failure to follow the proper headboardbed so you can more easily gain access to thebracket installation instructions may result inTEMPUR-Ergo Plus frame.damage to your TEMPUR-Ergo Plus.Use the wireless remote to raise the head of the STEP 1BWARNING: The bottom of the headboard crossPlace the Inner Headboard Bracket (A) into themember must be positioned so that there is noC-channel frame, making sure the bracket opening andmore than 3 inches between the bottom of thethe C-channel opening are facing each other. This willheadboard and the top of the mattress. Failurecreate a box shape. This step does not require you toto follow this instruction could result in seriousloosen or remove any bolts on the delivered bed frame.injury or death to a person or pet caughtbetween the mattress and the headboard.Before discarding any packing materials, check yourHeadboard Bracket Kit and verify the following itemsin the parts list are included:PARTS LISTA. Inner Headboard Bracket (2)B. Outer Headboard Bracket (2)A.Place one (1) Bracket Bolt (C) with a 5/16 InchWasher (D) through a predrilled hole in theC. Bracket Bolt (6)C-channel frame and pass it through the InnerD. 5/16 Inch Washer (12)Headboard Bracket such that a distance ofE. 5/16 Inch Locking Nut (6)B.F. Wrench (1)Use 5/16 Inch Washer (D) and 5/16 Inch Locking NutThe two (2) Leg Clamp Bracketskit (not shown)between the edge of the TEMPUR-Ergo Plusand the Headboard Bracket assemblies.G. Allen Wrench (1)included in yourapproximately 1 1/2 inches to 2 inches exists(E) and hand tighten to allow for adjustment.C.D.F.G.are pre‑installedon this model.E.Repeat on other side of the frame.CUSTOMER SERVICE: 1–800–821–662115

TEMPUR‑Ergo Plus STEP 1CSTEP 2BPlace the open side of the Outer Headboard BracketMeasure the center-to-center distance of the(B) onto the exposed C-channel of the Innermounting holes in the Headboard BracketHeadboard Bracket (A). This will create a tight fitassemblies.between (A) and (B).STEP 2CIf the Headboard Brackets require adjustment,loosen the bolts that are holding the OuterHeadboard Bracket (B) and move them so that themounting holes on the Outer Headboard Bracket (B)align with the mounting holes on your headboard.Reinstall the bolts on the Outer Headboard Bracket(B) and firmly tighten.Place two (2) Bracket Bolts (C) with a 5/

Plus during the warranty period, please consult the troubleshooting section of your Reference Guide. If the problem persists, please contact Tempur-Pedic's Customer Service Department by calling toll-free 1-800-821-6621 or by sending an email to customer.service@tempurpedic.com. PLEASE RETAIN THIS WARRANTY PAPERWORK AND ORIGINAL