Transcription
TEMPUR‑Up Foundation Complete Reference GuidePatents pending 2013 Tempur-Pedic Management, LLC. All Rights Reserved.TUF-100-01
TEMPUR‑Up Foundation Limited Warranty for TEMPUR‑Up Foundation TEMPUR-PEDIC NORTH AMERICA, LLC (“TEMPUR-PEDIC”)WARRANTS THAT IT WILL, AT TEMPUR-PEDIC’S OPTION, REPLACEOR REPAIR PURCHASER’S TEMPUR-UP FOUNDATION IF IT ISDEFECTIVE DUE TO FAULTY WORKMANSHIP OR MATERIALS,SUBJECT TO THE LIMITATIONS DESCRIBED IN THIS WARRANTY.TEMPUR-PEDIC UNDERTAKES NO RESPONSIBILITY FOR THEQUALITY OF THE GOODS EXCEPT AS OTHERWISE PROVIDED IN THISWARRANTY. THERE ARE NO WARRANTIES THAT EXTEND BEYONDTHE DESCRIPTION ON THE FACE THEREOF.THIS WARRANTY APPLIES ONLY TO TEMPUR‑Up FOUNDATION.THIS MODEL MAY BE IDENTIFED BY REFERENCE TO THE SERIALNUMBER ON THE PRODUCT.YEARS 1 THROUGH 3: FULL COVERAGE OF PARTS AND LABORTEMPUR‑Up Foundation is warranted against defects in theworkmanship or materials for a period of three (3) years from the warrantycommencement date. During these first three years of the Warranty,the entire product is so covered, including factory supplied electronics,electrical components, drive motors and power supply components.Upon notice during the first through third year from the Warrantycommencement date, Tempur-Pedic will send replacement parts to thePurchaser, at no cost, in order to replace any such defective part. Inaddition, Tempur-Pedic will pay all authorized labor and transportationcosts associated with the repair or replacement of any parts whichTempur-Pedic determines to be defective. This three (3) year warrantyshall not apply if the purchaser does not return any and all defectiveparts to Tempur-Pedic within 15 days of purchaser’s receipt of suchreplacement parts furnished. Return of the Base, however, should it needto be replaced, is not required.In no instance will this Warranty cover any damage attributable tomisuse or to normal wear and tear or to excessive weight placed upon theproduct. Nor will this Warranty cover any purchaser other than the originalpurchaser nor will it cover product purchased from an unauthorizedthird party. If you are not the original purchaser of this product, you take“as is” and “with all faults.” If you did not purchase this TEMPUR‑Up Foundation directly from Tempur-Pedic we will require proof of purchasefrom you demonstrating that you are the original purchaser and areeligible to make a valid claim under this Warranty.YEARS 4 THROUGH 5: FULL COVERAGE OF PARTS ONLYUpon notice during the years four (4) and five (5) from the warrantycommencement date, Tempur-Pedic will offer replacement parts forany defective parts to the purchaser. Factory supplied electronics,electrical components, drive motors and power supply components areincluded. This two (2) year warranty shall not apply if purchaser doesnot return any and all defective parts to Tempur-Pedic within 15 days ofpurchaser’s receipt of replacement part. Purchaser shall bear all service,transportation, labor and shipping costs related to the delivery and/orreplacement of the defective part.BASE ONLY—YEARS 1 THROUGH 15 WARRANTYNotwithstanding the above, Tempur-Pedic extends a 15 Year Warrantyon the Base itself used in this product. Specifically, Tempur-Pedicwarrants that for a full 15 years, any defect in the workmanship or thematerials used in the Base itself shall be covered. The 15 year time spanwill be dated from the commencement of this Warranty. For purposesof this 15 Year Warranty, the Base consists of the wooden and metalstructure of the Foundation and specifically excludes its cover, deckingand legs, actuator lift motors, control box, remote controls, power supply,and any power supply cords. Return of the Base should it need to bereplaced, is not required.A proper bed frame must provide sturdy support for both the mattressand foundation. Tempur-Pedic highly recommends either:(i) leg accessories designed for TEMPUR‑Up Foundation (providedby Tempur-Pedic at an additional cost)(ii) a 3 bed beam support system (provided by Tempur-Pedic at anadditional cost), OR(iii) a support system of similar quality that is designed specifically togive slatted style bed frames additional structural support. For slattedstyle bed frames, it is incumbent upon purchaser to ensure that theframe utilized offers ample structural support for that particular slattedstyle frame.Failure to have a proper bed frame may invalidate the Warranty.This Warranty and other performance warranties are based on testsconducted on “sets” that consist of our mattresses and foundations.Tempur-Pedic foundations should be placed on a bed frame thatis structurally capable of supporting the weight of the purchaser’sTempur-Pedic mattress, foundation, and user(s). IF PURCHASER USESINAPPROPRIATE BED FRAMES WITH THIS FOUNDATION, SUCHUSE WILL VOID THIS WARRANTY AND ALL OTHER WARRANTIES,WHETHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUTLIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE. Tempur-Pedic may requireproof of the quality of bed frame if purchaser makes a claim under thiswarranty. Tempur-Pedic reserves the right to invalidate this warranty if thefoundation is found to be in an unsanitary condition.The Consumer Product Safety Commission has created the Standardfor the Flammability (Open Flame) of Mattress Sets in Federal Register16 CFR Part 1633. Foundations are specified for use with particularmattresses and therefore use outside of these specifications, should notbe construed as 16 CFR Part 1633 compliant.Customer Service: 1–800–821–66212
WarrantyADDITIONAL TERMS AND CONDITIONSIn no instance will this Warranty cover any damage attributable tomisuse or to normal wear and tear or to excessive weight placed upon theproduct. Nor will this Warranty cover any purchaser other than the originalpurchaser nor will it cover product purchased from an unauthorizedthird party. If you are not the original purchaser of this product, you take“as is” and “with all faults.” If you did not purchase this Tempur-Pedic TEMPUR‑Up Foundation directly from Tempur-Pedic we will requireproof of purchase from you demonstrating that you are the originalpurchaser and eligible to make a valid claim under this Warranty.This Warranty does not include coverage for damage caused by thepurchasers or by other users if the product has been used in a mannerinconsistent with the operation and maintenance procedures outlinedin the Complete Reference Guide, this Warranty, or any other applicabledocument published or approved by Tempur-Pedic. Nor does it includecoverage if the product has been repaired or modified by the purchaseror by an unauthorized third party or if the product has been damaged intransit. This warranty does not apply to damage to mattresses, fabric,cables, electrical cords or items supplied by Resellers, as defined below.Contact the Reseller or other appropriate party for warranty informationon these items. Nor does this Warranty apply to any unnecessary servicecalls, including costs for in-home service calls solely for the purpose ofeducating the consumer about the unit or finding an unsatisfactory powerconnection. In addition, if the recommended weight restrictions are notfollowed (Twin, Twin Long, Double, Queen, and Split/Dual CA King bases– up to 650 lbs. each) this Warranty is void.Replacement parts may be new or reconditioned at Tempur-Pedic’sdiscretion.Except for the 15 Year Warranty provided for the frame of this product,there is no warranty at all after five years, dating from commencement ofthis Limited Warranty.Additional Limitations on Warranty CoverageIn the event a warranty claim is filed and a warranty replacement isdeemed necessary, purchaser will be required to surrender the originalproduct, including any components, to Tempur-Pedic at the time of thereplacement. Return of the Base, however, should it need to be replaced,is not required.If original proof of purchase is not provided by the purchaser,Tempur-Pedic reserves the right to determine if the unit is covered, or isnot covered, by this Warranty and may use the manufacturing date as thewarranty commencement date.The decision to repair or to replace defective parts under this LimitedWarranty shall be made by Tempur-Pedic at its option and at its solediscretion. Except for the Warranty provided for the frame of this product,there is no warranty at all after five years, dating from commencement ofthis Limited Warranty.TEMPUR-PEDIC SHALL NOT BE LIABLE FOR INCIDENTAL ORCONSEQUENTIAL DAMAGES RESULTING FROM THE USEOF THIS PRODUCT OR ARISING OUT OF ANY BREACH OFTHIS WARRANTY. THE EXCLUSIVE REMEDY FOR BREACHOF THIS WARRANTY SHALL BE REPLACEMENT OR CREDITTOWARDS REPLACEMENT AS SET FORTH HEREIN. THEREARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDINGIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE, OTHER THAN THE WARRANTYDESCRIBED ON THE FACE OF THIS LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental orconsequential damages, so the above limitation or exclusion may notapply to every purchaser. This warranty gives the purchaser specific legalrights, and the purchaser may also have other legal rights, which mayvary from state to state. This Warranty is valid in all 50 states, Puerto Ricoand Canada.If you the purchaser experience any problem with yourTEMPUR‑Up Foundation during the Warranty period, pleaseconsult the troubleshooting section of your Reference Guide. If theproblem persists, please contact Tempur-Pedic’s Customer ServiceDepartment by calling toll-free 1-800-821-6621 or by sending an email tocustomer.service@tempurpedic.com.PLEASE RETAIN THIS WARRANTY PAPERWORK AND ORIGINALSALES RECEIPT FOR EASY FUTURE REFERENCE ANDDOCUMENTATION.Repairs to or replacement of the Tempur-Pedic TEMPUR‑Up Foundation or its components under the terms of this Limited Warrantywill apply to the original warranty period and will not serve to extend suchperiod. This Warranty begins on the “warranty commencement date”which is the date of purchase for new unused products.If you did not purchase this Tempur-Pedic TEMPUR‑Up Foundationdirectly from Tempur-Pedic, proof of purchase will be required todemonstrate that you are the original purchaser and eligible to make avalid claim under this Warranty.Customer Service: 1–800–821–66213
TEMPUR‑Up Foundation Table of ContentsWarranty. 2Safety Precautions. 5Commonly asked Questions and Answers. 9Specifications. 10InstallationInstallation Instructions. 11Pre-Delivery Procedure. 12Delivery Procedure. 13Joining Two Foundations. 15OPERATIONWired Remote Control Features. 16Operating Instructions. 17Special FunctionsEmergency Power-Down. 18Change from Tandem System to Single System. 18Troubleshooting. 19Operating electronics andmotors are UL-approvedCustomer Service: 1–800–821–66214
Safety PrecautionsSafety PrecautionsWARNING!Keep the air openings free of lint, hair and the like. Never drop or insert any object into any opening.IMPORTANT SAFETY Do not use outdoors.INSTRUCTIONS. Do not operate where aerosol (spray) products arebeing used or where oxygen is being administered.PLEASE READ THESE To disconnect, turn all controls to the off position,INSTRUCTIONSthen remove plug from outlet.THOROUGHLY BEFOREWARNING!Risk of Injury — keep children away from extendedUSING THIS PRODUCT.head support (or other similar parts).SAVE THESE INSTRUCTIONS!The TEMPUR‑Up Foundation has been designed toWARNING!provide you with the reliable operation and durability Never operate the furnishing with the air openings blocked. Risk of electric shock — connect this furnishingyou expect. This product has been inspected andto a properly grounded outlet only. See groundingtested prior to shipment.instructions.When using an electrical furnishing, basic precautionsGROUNDING INSTRUCTIONSshould always be followed, including the following:This product must be grounded. If it should malfunctionREAD ALL INSTRUCTIONS BEFORE USING YOURor breakdown, grounding provides a path of leastTEMPUR‑Up Foundation.resistance for electric current to reduce the risk ofDANGERelectric shock. This product is equipped with a cordTo reduce the risk of electric shock:having an equipment-grounding conductor and Always unplug this furnishing from the electricala grounding plug. The plug must be plugged intoan appropriate outlet that is properly installed andoutlet before cleaning.WARNING!grounded in accordance with all local codes andto persons:DANGERTo reduce the risk of burns, fire, electric shock, or injury Unplug from outlet before putting on or taking off parts. Close supervision is necessary when this furnishing isused by, or near children, invalids, or disabled persons. Use this furnishing only for its intended useas described in these instructions. Do not useattachments not recommended by the manufacturer. Never operate this furnishing if it has a damaged cordor plug, is not working properly, has been dropped orordinances.Improper connection of the equipment-groundingconductor can result in a risk of electric shock. Checkwith a qualified electrician or serviceman if you are indoubt as to whether the product is properly grounded.Do not modify the plug provided with the product. If itwill not fit the outlet, have a proper outlet installed by aqualified electrician.damaged, or dropped in water. Return the furnishing to aservice center for examination and repair. Keep the cord away from heated surfaces.Customer Service: 1–800–821–66215
TEMPUR‑Up Foundation SAVE THESEINSTRUCTIONS!GROUNDING SAFETYThis product is for use on a nominal 120-volt circuit,and has a grounding plug that looks like the plugillustrated in sketch A (see figure). A temporary adapteras illustrated in sketches B and C can be used toconnect this plug to a 2-pole receptacle as shown insketch B if a properly grounded outlet is not available.FOR BEST RESULTS, The TEMPUR‑Up Foundation SHOULD BE PLUGGED INTO ASURGE PROTECTOR (not included).The temporary adapter should be used only until aWARRANTY precaution!properly grounded outlet (sketch A) can be installedDo not open control box, motors or remote controlby a qualified electrician. The green colored rigid ear,(with the exception of the battery compartments). Thelug, or the like extending from the adapter must bewarranty is void if these units are tampered with. Anyconnected to a permanent ground such as a properlyrepair or replacement of TEMPUR‑Up Foundation partsgrounded outlet box cover. Whenever the adaptermust be performed by an authorized service person.is used, it must be held in place by a metal screw.IN-HOME USE AND HOSPITAL DISCLAIMERThis product is for use on a circuit having a nominalYour TEMPUR‑Up Foundation is strictly designed forrating of more than 120 volts and is factory equippedin-home use only. It is NOT designed for hospitalwith a specific electric cord and plug to permituse and is NOT designed to meet hospital standards.connection to a proper electric circuit. Make sure thatDo not use this bed with TENT TYPE oxygenthe product is connected to an outlet having the sametherapy equipment or near explosive gases.configuration as the plug. No adapter should be usedWARNING!with this product. If the product must be reconnectedfor use on a different type of electric circuit, theDO NOT USE NEAR PEOPLE USING OR WEARINGreconnection should be made by qualified serviceMEDICAL DEVICES. FOR HOUSEHOLD / RESIDENTIALpersonnel.USE ONLY. DO NOT USE OUTDOORS.This product conforms to UL STD 962.Unauthorized modifications could void the electricalportion of your warranty. Failure to use a properlygrounded outlet for this product or modification of theplug will compromise this important grounding safetyfeature and may result in electric shock, electrical fire,or faulty operation of the product.Customer Service: 1–800–821–66216
Safety PrecautionsIMPORTANT SAFETY FEATURESUse this furnishing only for its intended use asdescribed in these instructions. Do not use attachmentsnot recommended by the manufacturer.If there is an overload weight condition on the headmechanism, the control unit will automatically stop thecorresponding functions. Once the excess weight isremoved, the control unit will automatically allow allfunctions to resume.SMALL CHILDREN ANDPETS WARNINGAfter the TEMPUR‑Up Foundation has been unboxed,immediately dispose of packaging as it can smothersmall children and pets. To avoid injury, children andpets should not be allowed to play on or under thebed. Children should not operate this product withoutadult supervision. Close supervision is necessary whenthis furnishing is used by, or near children, invalids, orLegs and locking casters are available for aftermarketpurchase. In order to prevent the movement of thisproduct with casters, all four casters should be in thedisabled persons.SAVE THESE INSTRUCTIONS!locked position. This can be accomplished by pushingYour TEMPUR‑Up Foundation has been designed todown the locking latch on the caster. To resume mobilityprovide you with the reliable operation and durabilityof the product, lift the locking latch up. You are stronglyyou expect. This product has been inspected andencouraged to place rubber caster cups or carpettested prior to shipment.squares under the casters in addition to locking them inplace if the product is positioned on a hard surface floorsuch as hardwood, tile or linoleum. Although the castersare locked and will not roll, they may slide.Service RequirementsService technicians are not responsible for movingfurniture, removing headboards and footboards orany items required to perform maintenance on yourUSER-SERVICEABLE PARTSTEMPUR‑Up Foundation. In the event the technician isThis product is specifically designed to beunable to perform service due to lack of accessibility, themaintenance-free for the user. Therefore, you areservice call will be billed to the purchaser and the serviceencouraged not to open any motors, alter the wiring,will be re-scheduled.or adjust, modify or change the structure of theproduct, as it will void the warranty.POWER RATINGS:MODEL NO: TUF-100INPUT: AC 120V VAC, 60 Hz, 2.5 A MAXOUTPUT: DC 29V – 2.5ARated Current: 2.5AControl Accuator: 1Customer Service: 1–800–821–66217
TEMPUR‑Up Foundation PRODUCT RATINGSINTENDED USAGEThe lift motor in the TEMPUR‑Up Foundation is NOTThe electric adjustable bed should be installed withdesigned for continuous use. Reliable operation andthe head of the frame positioned close to a wall.full life expectancy will be attained as long as the liftmotor does not operate more than two (2) minutesover a 20-minute period, or approximately 10% dutycycle. Any attempt to circumvent or exceed this ratingwill shorten the life expectancy of this product andmay void the warranty. The recommended weightrestrictions on our TEMPUR‑Up Foundations are asfollows: Twin, Twin Long, Double, Queen, and Split/Dual CA King foundations – up to 650 lbs. each. ThisTEMPUR‑Up Foundation will structurally support therecommended weight distributed evenly across thethe entire length of the foundation. This product is notdesigned to support or lift this amount of weight in thehead section alone.NOTE: Exceeding the recommended weightrestrictions could damage your TEMPUR‑UpFoundation and void your warranty.For best performance, you should enter and exit theTEMPUR‑Up Foundation while it is in the flat or fullylowered position.Customer Service: 1–800–821–66218
Questions and AnswersCommonly asked Questions and AnswersWhat is the height of The TEMPUR‑Up Foundation?The TEMPUR-Up Foundation arrives ready to placewithin a standard bedframe. The total height will varybased on your bedframe. The height of the foundationalone is 9 inches.Where is the serial number on the TEMPUR‑UpFoundation?The serial number can be found in two locations of thefoundation — on the back of the right side of the headsection (visible when the head section is raised), and onthe law tag attached to the foot section.Is it possible to raise the height of theTEMPUR‑Up Foundation?The leg height of the TEMPUR‑Up Foundation canbe adjusted from approximately 3 1/4 inches toapproximately 12 1/4 inches with leg and caster setsavailable from Tempur‑Pedic. See the chart on page10 for available options.Does the unit have AC or DC motors?The lift motors used on the TEMPUR‑Up Foundationare DC motors. The foundation’s power supply convertsthe AC power from the wall outlet to DC power.Does the TEMPUR‑Up Foundation come withHeadboard or footboard attachments?No, you cannot attach a headboard or footboarddirectly to the TEMPUR‑Up Foundation. However, youcan use a “freestanding” bed including headboard,footboard and side rails by placing the completeTEMPUR‑Up Foundation within the assembledbed. The TEMPUR‑Up Foundation can be used inconjunction with bed slats. You should measure theinside dimensions of the assembled bed to be sure thefoundation will fit. It may be easiest to assemble thebed around the foundation. One of our riser leg setsmay be required in some cases.Will the TEMPUR‑Up Foundation fit insideexisting furniture?The TEMPUR‑Up Foundation is designed to fit intomost “freestanding” beds. We always recommend youmeasure the inside dimensions of the assembled bedto be sure the TEMPUR‑Up Foundation will fit. Pleaserefer to the specifications on page 10 for dimensionsof the foundation. One of our aftermarket riser leg setsmay be required in some cases. The TEMPUR‑UpFoundation can be used in conjunction with bed slats.Who do I call for service or support if needed?Service and technical support are available by calling ourdedicated customer service group at 1‑800‑821‑6621.An owner’s manual is included with each foundationincluding other information for making claims.Is an extended warranty available?No.Do I get a full warranty if I purchase a floormodel?Yes. However, your warranty start date is the date ofmanufacture which is clearly marked on the law tagattached to the foundation (not your actual purchasedate).What are the electrical requirements of theTEMPUR‑Up Foundation?During normal operation, the foundation can draw up to2.5A of electricity from a normal AC wall outlet.Customer Service: 1–800–821–66219
TEMPUR‑Up Foundation Bed TypeSpecificationsTwinA. FoundationWidthB. FoundationLengthWeight37 1/2"74 1/4"114 lbTwin Long37 1/2"79"119 lbDouble53 1/4"75"139 lbQueen58 1/4"79"151 lbSplit CA King35 3/4"82 3/4"118 lb9"** Legs and casters are optional andavailable as aftermarket purchases.AB9"18"*54 3/4"Measurements are approximate and based on 9" riser leg kit.*Legs and casters are optional and available as aftermarket purchases.No Leg(standard)Caster Only*4 1/2" Riser Leg*(without caster)4 1/2" Riser Leg(with caster)*6 1/2" Riser Leg*(without caster)6 1/2" Riser Leg(with caster)*9" Riser Leg*(without caster)9" Riser Leg(with caster)*DDDDDDCDCDCCCCCC) To Foundation0"3 1/4"4 1/2"7 3/4"6 1/2"9 3/4"9"12 1/4"D) To Mattress9"12 1/4"13 1/2"16 3/4"15 3/4"18 3/4"18"21 1/4"CUsToMER sERviCE: 1–800–821–662110
installationInstallation Instructions*Attached to foundation for shipping.Appearance of some parts may differ from photos.Before discarding any packing materials, check theTEMPUR-Up Foundation carton and verify thefollowing items in the parts list are included:PARTS LISTA. Wired Remote Control – hardwired to bed (1)A.B.C.D.E.F.B. Connection Y-Cable (1) - (Only on Twin Long, andSplit CA King)C. Mattress Retainer Bar (1)*D. Retainer Bar Plate (2)*E. Retainer Bar Screw (2)*F. 9-Volt Batteries (2)CUsToMER sERviCE: 1–800–821–662111
TEMPUR‑Up Foundation Pre‑Delivery ProcedureSTEP 1STEP 6Lift carton top off box to reveal the bottom of thefoundation.Once the warehouse test is successful and complete: Unplug the power extension cord Place the lid back on the outer carton and secureSTEP 2Using a power extension cord to reach thefoundation, plug in the foundation’s power cord.NOTE: Do not uncoil the foundation power cordwhich is packaged for shipment.for deliveryNOTE: Always keep the foundation in a flat,horizontal position during transportation anddelivery.NOTE: To avoid damage to the TEMPUR-Up STEP 3Slide the cover off the battery compartment on thepower supply and install the provided (2) 9-VoltFoundation, always open the carton while thebed is in the flat position.Batteries (F). Replace the battery compartmentcover.STEP 4Cut the plastic strapping on each Wired RemoteControl from the foundation frame. Ensure that thewired remote is connected to the foundation.STEP 5Power Test Procedure:Press each of the following buttons long enough toilluminate the blue LED backlight on the remotecontrol, and watch/listen for the foundation toactivate. This ensures you will be delivering afoundation that is fully functional. Test thefoundation by pressing the buttons in the followingsequence.1. Head Lift2. FlatNOTE: Only press each button long enoughto hear or see the function activate on thefoundation.CUsToMER sERviCE: 1–800–821–662112
installationDelivery ProcedureNOTE: Always keep the TEMPUR-Up Foundation in a flat, horizontal position duringtransportation and delivery. Always open thebox in the flat position.STEP 4Remove the Wired Remote Control from the frame.Verify the (2) 9-Volt Batteries were installed into thebattery compartment of the power supply.STEP 1Carefully take the foundation in the carton to thebedroom and place next to where the customerwants it set up.STEP 2Carefully lift the TEMPUR-Up Foundation out of theshipping carton, keeping the unit topside down.For safety reasons, this should be performed bytwo people.NOTE: To avoid damageSTEP 5to the foundation,Connect the power cord from the power supply toalways open the cartonthe surge protector (not included).while the bed is in theflat position.STEP 6NOTE: Aftermarket legs and casters areavailable for purchase.STEP 3The products come packed in a cardboard box.Some components are also sealed in plastic film.If purchased, attach TEMPUR-Up Foundation LegsTo unpack, proceed as follows:by following instructions included with accessories.STEP 3ANOTE: Hand tighten the legs securely to theRemove the cardboard and plastic film from theframe. DO NOT over tighten. Make sure the legscomponents.are screwed completely into the frame. Legs thatare not securely attached may become unsafe.STEP 3BCheck the package contents.STEP 3CDO NOT unscrew a leg to compensate for anuneven floor.Dispose of the packaging materials.NOTE: In order to prevent the movement of thisSTEP 3Dposition.Keep the user manual at hand for the operators.product, all four casters should be in the lockedCUsToMER sERviCE: 1–800–821–662113
TEMPUR‑Up Foundation STEP 7STEP 10CIf this delivery involves dual foundations and/orInstall Mattress Retainer Bar (C) and replace Retainersplit mattresses, see instructions for joining twoBar Plate (D).foundations on page 15.STEP 8Carefully flip the TEMPUR-Up Foundation(s) over tothe topside up position.NOTE: Make sure to lift the foundation(s) off theground before flipping over. DO NOT use legs asa leverage point to ensure they do not break.!STEP 10DTighten Retainer Bar Screw (E) with screw driver.ATTENTION ! Improper handlingDO NOTlean the bed against theinstalled legs to flip it over.!Proper handlingTurn bed over without leaning against theinstalled legs.Route the control box cable to your preferred side ofSTEP 9STEP 11Place the mattress(es) on the foundation(s).the bed.STEP 10Install the Mattress Retainer Bar (C).STEP 10ARemove Mattress Retainer Bar (C) from frame.STEP 10BUnscrew Retainer Bar Plate (D) and Retainer Bar Screw(E) from frame with screw driver (not provided).WARNING: When placing the foundation(s)within a bedframe, verify the space betweenthe headboard cross member and the top of themattress is no more than 3 inches.STEP 12Ensure the power switch on the surge protector is inthe “on” position and that it is plugged into the walloutlet. Check the system for functionality with themattress in place.CUsToMER sERviCE: 1–800–821–662114
InstallationInstructions For Joining Two FoundationsOne wired remote control and two TEMPUR‑Up FoundationsAssembling Split/Dual Foundations (Frame A andSTEP 4Plug in the “A” output of the Y-Cable into Frame Acontrol port.Frame B) to be used together as a single King or CAKing system.Note: The use of “Frame A” and “Frame B” isfor description purposes only and the beds willnot actually be labeled “Frame A” or “Frame B”.NOTE: Wired Remote Control and Y-Cableare attached to underside of the TEMPUR‑UpFoundation for shipping.STEP 1Carefully unplug the Wired Remote Controls fromFrame A and Frame B.STEP 5Plug in the “B” output of the Y-Cable into Frame BSTEP 2Remove both Wired Remote Controls and set aside.Place the spare remote control in a safe place forany future use.control port.STEP 6Plug one of the provided Wired Remote Controlsint
there is no warranty at all after five years, dating from commencement of this Limited Warranty. TEMPUR-PEDIC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE REPLACEMENT OR CREDIT
