Transcription
Today, hospitals seek to improve their quality of care and workas efficiently as possible. The easy-to-use Vista 120 CentralMonitoring System lets you centrally monitor the vital signsof up to 64 patients connected to Vista 120 bedside monitors.This central surveillance streamlines workflow for clinicians,while significantly increasing patient safety.D-64647-2012Vista 120 Central Monitoring System– Easy to use: most functions can be done in just three steps, giving clinicians more time for direct patient care– Supports up to 64 patients: simultaneously displays monitored information from a maximum of 64 networkedbedside patient monitors on two screens– Bidirectional control: allows clinicians to configure and display alarm settings at the central station for eachbedside monitor, eliminating the need to walk to each bedside monitor to change alarm settings– Network security: because the central station runs on a dedicated network, it does not communicate withthe external network, which helps ensure the security of patient data– Flexible report exporting: patient monitoring reports can be sent to networked printers or saved asPDF documents for reviewINTUITIVE INTERFACE MAKESHIGH RELIABILITY,SYSTEM EASY TO USEHIGH NETWORK SECURITYThe Vista 120 Central Monitoring Systemenables clinicians to simultaneouslymonitor up to 32 patients on a singledisplay and up to 64 patients using twodisplays. The high performance LCDwidescreen display is available in twosizes: 19" (48.26 cm) and 22" (55.88 cm).The Vista 120 Central Monitoring Systemruns on a very robust and reliable hardwareplatform from Kontron , a world leader inembedded computing systems.The central station is designed for clinicaluse by nurses, biomedical engineers anddoctors. Because the interface is veryuser-friendly and easy to operate, minimaltechnical training is required.Because the central station is built on adedicated network, it does not communicatewith external networks. As a result, networksecurity for the central station – andultimately for patients – is ensured.D-68804-2012FEATURESVista 120 Central Monitoring SystemIncreases efficiency by providing centralsurveillance of your monitored patients
02 VISTA 120 CENTRAL MONITORING SYSTEMHigh performance LCDwidescreen display in two sizes:19" or 22" diagonalConnects up to 32 patients on a singledisplay, up to 64 on two displaysThree levels of audible and visual alarmsInternal hardware generates alarmif operating system failure is detectedD-68804-201272-hour full disclosure waveform reviewand storagePower off data storage functionBidirectional alarm configurationAbility to set and initiate NIBP measurementsBIDIRECTIONAL CONTROLFOR EASY ALARM CONFIGURATIONThe Vista 120 Central Monitoring Systemgenerates both audio and visual alarmsfrom bedside monitors, supporting rapidresponse and assessment of a patientevent from a central location.You can configure alarm settings at thecentral station for each bedside monitor.Each different alarm configuration can bedisplayed at the central station. You can alsoinitiate and configure NBP measurementsfrom the central station.FLEXIBLE REPORT EXPORTINGThe Vista 120 Central Monitoring Systemenables you to print reports of patientmonitoring information by exporting monitoring reports to a networked printer, orsave the report as a PDF document.
240 hours of graphicaland tabular trends720 alarm events per patient12-hour short trend per patientExports patient monitoring reportsto network printers or intoPDF documentsDrug calculation and titration tableComprehensive system helpinformationEasy point-and-click interface
VISTA 120 CENTRAL MONITORING SYSTEMTECHNICAL DATAPerformancePhysiological waveforms displayedPhysiological parameters displayedTrend timeEvent disclosureAlarmsTechnical alarmFull disclosure waveform storageHardware specificationsCPUChassisMotherboardDisplayNetwork performanceStructureTransmission speedTransmission contentNumber of networked monitors2 channels of ECG waveforms1 channel of RESP waveform1 channel of PLETH waveform2 channels of IBP waveforms1 channel of CO2 waveform4 channels of AG waveforms for CO2, O2, N2O and AAHR, RESP, STSpO2 and PRSYS, MAP and DIA of NBPSYS, MAP and DIA of IBPTwo temperatures and 1 delta temperatureetCO2, ftCO2 and AWRR of CO2etCO2 /FiCO2, etN2O/FiN2O, etO2 /FiO2, etAA/FiAA, AWRR, MAC of AGC.O., T.B.240-hour trend display for each bedside monitor12-hour short trend display for each bedside monitor720 alarm strips including parameters and ST alarmParameter alarmST alarmArrhythmia alarmVital alarm3 levels of audible and visual alarms72-hour full disclosure waveform storage/reviewIntel Core i3-2120 processor with active coolerKontron KISS 4U V2 chassisKontron KTQ67/FLEX motherboardPower supply input socket1 serial port1 parallel port2 USB ports1 RJ-45 networking interface1 keyboard interface1 PS/2 mouse interfaceSound output interfaceMicrophone input interfaceEthernet 802.310M, 100MWaveforms, parameters and alarms of all networked bedside monitorsA maximum of 64 bedside monitorsORDERING INFORMATIONVista 120 Central Monitoring SystemVista 120 instructions for use, EnglishMS298332680051Intel and CORE are trademarks or registered trademarks of Intel Corporation.Kontron is a trademark or registered trademark of Kontron AG. 04
VISTA 120 CENTRAL MONITORING SYSTEMD-90877-2013D-90876-201305 Single Bed View: provides access to all waveforms and parametersfor any monitored patientD-99141-2013D-99142-2013Full disclosure: allows you to easily access and configure all full disclosurewaveforms, as well as document output in PDF formatAlarm setup: lets you centrally configure all alarm settings and synchronisenew bedside configurationsDatabase backup: exports patient data to external storage, saving space on thehard drive for new patients
90 69 858 15.05-1 Communications & Sales Marketing PP LE Printed in Germany Chlorine-free – environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co. KGaAMarket availabilityThe Vista 120 Central Monitoring System is available in selected markets only.For availability in your area, please contact the appropriate Dräger office from those listed below.CORPORATE HEADQUARTERSDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germanywww.draeger.comManufacturer:Dräger Medical GmbHMoislinger Allee 53–5523558 Lübeck, GermanyAs of August 2015:Dräger Medical GmbH changes toDrägerwerk AG & Co. KGaA.Locate your Regional SalesRepresentative at:www.draeger.com/contactREGION EUROPE CENTRALAND EUROPE NORTHDräger Medical GmbHMoislinger Allee 53–5523558 Lübeck, GermanyTel 49 451 882 0Fax 49 451 882 2080info@draeger.comREGION EUROPE SOUTHDRÄGER MÉDICAL S.A.S.Parc de Haute Technologied’Antony 225, rue Georges Besse92182 Antony Cedex, FranceTel 33 1 46 11 56 00Fax 33 1 40 96 97 20dlmfr-contact@draeger.comREGION MIDDLE EAST, AFRICADräger Medical GmbHBranch OfficeP.O. Box 505108Dubai, United Arab EmiratesTel 971 4 4294 600Fax 971 4 4294 699contactuae@draeger.comREGION ASIA / PACIFICDraeger MedicalSouth East Asia Pte Ltd.25 International Business Park#04-27/29 German CentreSingapore 609916, SingaporeTel 65 6572 4388Fax 65 6572 4399asia.pacific@draeger.comREGION CENTRALAND SOUTH AMERICADräger Panama ComercialS. de R.L.Complejo Business Park,V tower, 10th floorPanama CityTel 507 377 9100Fax 507 377 9130contactcsa@draeger.com
The central station is designed for clinical use by nurses, biomedical engineers and doctors. Because the interface is very user-friendly and easy to operate, minimal technical training is required. Vista 120 Central Monitoring System Vista 120 Central Monitoring System Increases efficiency by providing central surveillance of your monitored .
