Transcription
DELL EMC VMAX3 FAMILYVMAX 100K, 200K, 400KTMThe Dell EMC VMAX3 family delivers the latest in Tier-1 scale-out multi-controllerarchitecture with unmatched consolidation and efficiency for the enterprise. With completelyredesigned hardware and software, the VMAX 100K, 200K, and 400K arrays provideunprecedented performance and scale. Ranging from a single engine VMAX 100K to an 8engine VMAX 400K, these enhanced arrays offer dramatic increases in floor tile density byconsolidating high capacity disk enclosures for 2.5" drives and engines in the same systembay. VMAX 100K, 200K, and 400K arrays can be configured as either hybrid or all flashconfigurations. In addition, the ground breaking VMAX3 Hypervisor enables the VMAX3family to offer unified block and file support through Embedded NAS (eNAS), eliminating theneed for corresponding physical hardware. Embedded Management is also available,eliminating the need for the customer to allocate and manage an external server to runUnisphere for VMAX. Data at Rest Encryption is available on all VMAX3 models, for thoseapplications that demand the highest level of security in a Tier 1 converged platform.TMFAST.X extends VMAX3 data services capabilities with SLO provisioning to externalrdarrays including XtremIO, Cloud Array, and other 3 Party systems. VMAX3 now offers aneven wider range of choices for the datacenter with the addition of FICON support for ourMainframe customers, along with support for Fibre Channel, iSCSI and FCoE Front Endprotocols. And, VMAX3 has received VASA Provider Certification by VMware to supportVVol storage. And now, for the first time, VMAX3 arrays offer optional support forRecoverPoint for heterogeneous replication with Dell EMC arrays. This revolutionaryVMAX3 architecture delivers Virtual Matrix Bandwidth of 175GB/s per engine and up to1400GB/s across an eight engine VMAX3 array. All VMAX3 models come fully preconfigured out of the factory to significantly shorten the time to first I/O during installation.SpecificationsUNMATCHED ARCHITECTUREThe Dynamic Virtual Matrix Architecture enables IT departments to build storage systemsthat transcend the physical constraints of competing array architectures. This architectureallows scaling of system resources through common and fully redundant building blockscalled VMAX3 engines. VMAX3 engines provide the complete foundation for highavailability storage arrays. Each engine contains two VMAX directors and redundant interfaces to the Dynamic Virtual Matrix dual InfiniBand fabric interconnect. Each directorconsolidates front-end, global memory, and back-end functions, enabling direct memoryaccess to data for optimized I/O operations. Depending on the array chosen, up to eight (8)VMAX3 engines can be interconnected via a set of active fabrics that provide scalableperformance and high availability. The revolutionary VMAX3 Hypervisor provides theframework for currently supported and future embedded applications.The VMAX3 arrays support the use of native 6Gb/s SAS 2.5” drives in the array. Individualsystem bays can house either one or two engines and up to the per engine maximum of 6High Density Disk Array Enclosures (DAEs). As a result, each system bay can support upto 720 2.5" drives. In addition, all new arrays support system bay dispersion of up to 25rdmeters from the first system bay. All members of the family also support 3 party racking.Detailed specifications and a comparison of the three VMAX3 arrays follow.CIFICATION SHEETSPECIFICATION SHEET
VMAX3 FAMILY SPECIFICATIONSVMAX3 ARRAYENGINEVMAX 100KVMAX 200KVMAX 400KNumber of Enginessupported1 to 21 to 41 to 8Engine Enclosure4u4u4uCPUIntel Xeon E5-2620-v2Intel Xeon E5-2650-v2Intel Xeon E5-2697-v22.1 GHz 6 core2.6 GHz 8 core2.7 GHz 12 coreDynamic Virtual Matrix BW700GB/s700GB/s1400GB/s# Cores per CPU/perEngine/per System6/24/488/32/12812/48/384Dynamic Virtual MatrixInterconnectInfiniBand Dual RedundantFabric: 56Gbps per portInfiniBand Dual RedundantFabric: 56Gbps per portInfiniBand Dual RedundantFabric: 56Gbps per portCache-System Min (raw)512GB512GB512GBCache-System Max (raw)2TBr (with 1024GB engine)8TBr (with 2048GB engine)16TBr (with 2048GB engine)Cache-per Engine Options512GB, 1024GB512GB, 1024GB, 2048GB512GB, 1024GB, 2048GBVault StrategyVault to FlashVault to FlashVault to FlashVault Implementation2 to 4 Flash SLICs / Engine2 to 8 Flash SLICs / Engine2 to 8 Flash SLICs / EngineMaximum Front-End I/OModules/engine888Front-End I/O Modules andProtocols SupportedFC: 4 x 8Gbs (FC, SRDF)FC: 4 x 8Gbs (FC, SRDF)FC: 4 x 8Gbs (FC, SRDF)FC: 4 x 16Gbs (FC, SRDF)FC: 4 x 16Gbs (FC, SRDF)FC: 4 x 16Gbs (FC, SRDF)FICON: 4 x 16Gbs (FICON)FICON: 4 x 16Gbs (FICON)FICON: 4 x 16Gbs (FICON)FCoE: 4 x 10GbE (FCoE)FCoE: 4 x 10GbE (FCoE)FCoE: 4 x 10GbE (FCoE)iSCSI: 4 x10GbE (iSCSI)iSCSI: 4 x10GbE (iSCSI)iSCSI: 4 x10GbE (iSCSI)GbE: 2/2 Opt/Cu (SRDF)GbE: 2/2 Opt/Cu (SRDF)GbE: 2/2 Opt/Cu (SRDF)10GbE: 2 x 10GbE (SRDF)10GbE: 2 x 10GbE (SRDF)10GbE: 2 x 10GbE (SRDF)Max eNAS I/O Modules/Software Data Mover2 (min of 1 Ethernet I/Omodule required)3 (min of 1 Ethernet I/Omodule required)3 (min of 1 Ethernet I/Omodule required)eNAS I/O Modules SupportedGbE: 4 x 1GbE CuGbE: 4 x 1GbE CuGbE: 4 x 1GbE Cu10GbE: 2 x 10GbE Cu10GbE: 2 x 10GbE Cu10GbE: 2 x 10GbE Cu10GbE: 2 x 10GbE Opt10GbE: 2 x 10GbE Opt10GbE: 2 x 10GbE OptFC: 4 x 8Gbs (NDMP Back-up)(max 1 FC NDMP/SoftwareData Mover)eNAS SOFTWARE DATA MOVERSFC: 4 x 8Gbs (NDMP Back-up)FC: 4 x 8Gbs (NDMP Back-up)(max 1 FC NDMP/SoftwareData Mover)(max 1 FC NDMP/SoftwareData Mover)Max Software Data Movers2 (1 Active 1 Standby)4 (3 Active and 1 Standby)8 (7 Active and 1 Standby)Max NAS Capacity/Array(Terabytes Usable)25615363584CACHEVAULTFRONT END I/O MODULESeNAS I/O MODULES
VMAX3 ARRAYVMAX 100KVMAX 200KVMAX 400KMax Capacity per Array.54PBu2.31PBu4.35PBuMax Drives per System144028805760Max Drives per System Bay720720720Min Spares per System1114 1 spare4 1 spare4 1 spareCAPACITY, DRIVESMin Drive Count(1 engine)DRIVES3.5” SAS Drives3.5" Drives:3.5" Drives:[1]10K RPM SAS600GB 10K RPM15K RPM SAS300GB7.2K RPM SAS4TBFlash SAS800GB,2.5” SAS Drives2.5" Drives:10K RPM SAS600GB,15K RPM SAS300GB[1][1][1]300GB[1]7.2K RPM[2][1]4TB[1][3]1.6TB[1]600GB 10K RPM15K RPM[1][3]3.5" Drives:[1]Flash600GB 10K RPM[1]15K RPM300GB[1]7.2K RPM800GB,[1][3]4TB[1][3]1.6TBFlash2.5" Drives:[2]1.2TB10K RPM15K RPM300GB[2][1][2]10K RPM[2]300GB[2]1.2TB960GB,BE Interface6Gbps SAS6Gbps SAS6Gbps SASRAID OptionsRAID 1All drivesRAID 1All drivesRAID 1All drivesRAID 5 (3 1)RAID 5 (3 1)RAID 5 (3 1)RAID 5 (7 1)All drivesRAID 5 (7 1)All drivesRAID 5 (7 1)All drivesRAID 6 (6 2)RAID 6 (6 2)RAID 6 (6 2)RAID 6 (14 2)All drivesRAID 6 (14 2)All DrivesRAID 6 (14 2)All DrivesRAID OptionsRAID B,[1][3]10K y points and drive formats available for upgradesCapacity points and drive formats available on new systems and upgrades3Mixing of 800GB, or 1.6TB Flash capacities with 960GB, or 1.92TB Flash capacities on the same array is not supported.2Flash15K RPMFlash 00GB,1.6TB[2][3][1][3][1]15K RPM800GB,800GB,2.5" Drives:1.2TB[1][3]7.2K RPM[1][3]Flash SAS[1][3]600GB,15K RPMFlash
COMPONENTSVMAX 100KVMAX 200KVMAX 400KSYSTEM CONFIGURATION TYPESAll 2.5" DAE Configurations2 Bays 1440 Drives4 Bays 2880 Drives8 Bays 5760 DrivesAll 3.5" DAE Configurations2 Bays 720 Drives4 Bays 1440 Drives8 Bays 2880 DrivesMixed Configurations2 Bays 1320 Drives4 Bays 2640 Drives8 Bays 5280 Drives120 x 2.5” Drive DAEYesYesYes60 x 3.5” Drive DAEYesYesYesStandard 19" baysYesYesYesSingle Bay SystemConfigurationYesYesYesDual Engine System BayConfigurationYesYesYesThird Party Rack MountOptionYesYesYesUp to 82 feet (25m) betweenSystem Bay 1 and System Bay2Up to 82 feet (25 m) betweenSystem Bay 1 and any otherSystem BayUp to 82 feet (25 ) betweenSystem Bay 1 and any otherSystem Bay100% Thin ProvisionedYesYesYesPreconfigured in the FactoryYesYesYesOpen SystemsYesYesYesMainframe (CKD 3380 and3390 emulation)YesYesYesYesYesYesDISK ARRAY ENCLOSURESCABINET CONFIGURATIONSDISPERSIONSystem Bay DispersionPRE-CONFIGURATIONHOST SUPPORTIBM i Series Support(D910 only)HARDWARE COMPRESSION SUPPORT OPTION (SRDF)GbE/10 GbEYesYesYes8Gb/s FCYesYesYes16Gb/s FCYesYesYesSingle or Three PhaseSingle or Three PhaseSingle or Three PhaseDelta or WyeDelta or WyeDelta or WyePOWER OPTIONSPower
VMAX3 FAMILY CONNECTIVITYI/O PROTOCOLSVMAX 100KVMAX 200KVMAX aximum/engine323232Maximum/array64128256Max ports/Software Data Mover81212Maximum ports/array164896Max ports/Software Data Mover466Maximum ports/array82448Max ports/Software Data Mover111Maximum ports/array2488 Gb/s FC Host/SRDF Ports16 Gb/s FC Host/SRDF Ports16 Gb/s FICON Ports10 GbE iSCSI Ports10 GbE FCoE Ports10 GbE SRDF PortsGbE SRDF PortsEMBEDDED NAS PORTSGbE Ports10 GbE (Cu or Optical) Ports8 Gb/s FC NDMP Back-up Ports
SYSTEM BAY DISPERSIONSystem Bay Dispersion allows customers to separate any individual or contiguous group of system bays by up to a distance of 82 feet(25 meters) from System Bay 1. This provides unsurpassed datacenter flexibility in solving floor loading constraints or working aroundobstacles that mighty preclude fully contiguous configurations.DISK DRIVE SUPPORTThe VMAX 100K, 200K, and 400K support the latest 6Gb/s dual ported native SAS drives. All drive families (Enterprise Flash, 10K, 15Kand 7.2K RPM) support two independent I/O channels with automatic failover and fault isolation. Check with your EMC salesrepresentative for the latest list of supported drives and types. Configurations with mixed-drive capacities and speeds are alloweddepending upon the configuration. All capacities are based on 1 GB 1,000,000,000 bytes. Actual usable capacity may varydepending upon configuration.2.5” DISK DRIVESPLATFORM SUPPORTNOMINAL CAPACITY(GB)SPEED (RPM)AVERAGE SEEK TIME(READ/WRITE MS)RAW CAPACITY (GB)OPEN SYSTEMSFORMATTEDCAPACITY (GB)MAINFRAMEFORMATTEDCAPACITYVMAX 100K, 200K, 9.291574.551879.75287.86575.721180.911Capacity points and drive formats available for upgrades2Capacity points and drive formats available on new systems and upgradesMixing of 800GB, or 1.6TB Flash capacities with 960GB, or 1.92TB Flash capacities on the same array is not currently supported.3
3.5” DISK DRIVESVMAX 100K, 200K, 400KPLATFORM SUPPORT800NOMINAL CAPACITY 5.723938.10SPEED (RPM)AVERAGE SEEK TIME(READ/WRITE MS)RAW CAPACITY (GB)OPEN SYSTEMSFORMATTED CAPACITY(GB)MAINFRAME FORMATTEDCAPACITY (GB)[1][3]1Capacity points and drive formats available for upgradesCapacity points and drive formats available on new systems and upgrades3Mixing of 800GB, or 1.6TB Flash capacities with 960GB or 1.92TB Flash capacities on the same array is not currently supported.2POWER CONSUMPTION AND HEAT DISSIPATION AT VARIOUS AMBIENT INPUT TEMPERATURESCOMPONENTSMaximum Powerand Heatdissipation attemperaturesoo 26 C and 352,3CSYSTEM BAY 1,SINGLE ENGINESYSTEM BAY 2,1SINGLE ENGINESYSTEM BAY 1,DUAL ENGINESYSTEM BAY 2,1DUAL ENGINE1VMAX 100KMaximum TotalMaximum X 200KMaximum TotalMaximum MAX 400KMaximum TotalMaximum Heatpowerdissipationconsumption(Btu/Hr)(kVA)oooo 26 C 35 C 26 C 35 C 26 C 35 C 26 C 35 C 26 C 35 C 26 C 35 90Power Values for System Bay 2 and all subsequent System Bays where applicablePHYSICAL SPECIFICATIONSCOMPONENTSHEIGHT (IN/CM)WIDTH (IN/CM)DEPTH (IN/CM)WEIGHT (MAXIMUMLBS/KG)SYSTEM BAY,SINGLE 60/844SYSTEM BAY,DUAL ENGINE
INPUT POWER REQUIREMENTSSINGLE-PHASE NORTH AMERICAN, INTERNATIONAL, AUSTRALIANNorth AmericanSpecification3 wire connection (2 L & 1 G)International and Australian13 wire connection (1 L & 1 N & 1 G)Input nominal voltage200 – 240 VAC /- 10% L- L nom220 – 240 VAC /- 10% L - N nomFrequency50 – 60 Hz50 – 60 HzCircuit breakers30 A32 APower zonesTwoTwoPower requirements at customer site (min) Three 30A, single phase drops per zone. Two power zones require 6 drops, each drop rated for 30A1L line or phase, N neutral, G groundTHREE-PHASE NORTH AMERICAN, INTERNATIONAL, AUSTRALIANNorth American (Delta)SpecificationInput voltage24 Wire Connection (3 L & 1 G)International (WYE)15 Wire Connection (3 L & 1 N & 1 G)200 – 240 VAC /- 10% L- L nom220 – 240 VAC /- 10% L - N nom50 – 60 Hz50 – 60 HzCircuit breakers50 A32 APower zonesTwoTwoTwo 50 A, three-phase drops per bayTwo 32 A, three-phase drops per bayFrequencyPower requirements at customer1site (min)L line or phase, N neutral, G ground2An imbalance of AC input currents may exist on the three-phase power source feeding the array, depending on the configuration.The customer's electrician must be alerted to this possible condition to balance the phase-by-phase loading conditions within thecustomer's data center
RADIO FREQUENCY INTERFERENCEElectro-magnetic fields which include radio frequencies can interfere with the operation of electronic equipment. EMC Corporationproducts have been certified to withstand radio frequency interference in accordance with standard EN61000-4-3
arrays including XtremIO, Cloud Array, and other 3. rd. Party systems. VMAX3 now offers an even wider range of choices for the datacenter with the addition of FICON support for our Mainframe customers, along with support for Fibre Channel, iSCSI and FCoE Front End protocols. And, VMAX3 has received VASA Provider Certification by VMware to support VVol storage. And now, for the first time .
